NSCRTV-EPON-SYSTEM-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
6
Rows
6
Columns
53

oltPropertyTable

table
.1.3.6.1.4.1.17409.2.3.1.2.1 · 1 row entry · 9 columns
Open in standard view
Uses the fscom variant from /opt/observium/mibs/fscom.
Command help
Walk oltPropertyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NSCRTV-EPON-SYSTEM-MIB' -M '/opt/observium/mibs/fscom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NSCRTV-EPON-SYSTEM-MIB::oltPropertyTable' 
OLT???Ա?
oltPropertyEntry row .1.3.6.1.4.1.17409.2.3.1.2.1.1
Indexes
Column Syntax OID
oltDeviceIndex
OLT?豸?????š?

һ??OLT?ڵ?????ɶ?̨OLT?豸??ɡ??ڵ??ڵ?ÿ̨OLT?豸??OLT?豸??????Ψһ??ʶ
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.17409.2.3.1.2.1.1.1
oltName
??OLT?豸??????
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.17409.2.3.1.2.1.1.2
oltType
OLT?豸????
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.17409.2.3.1.2.1.1.3
oltAdminStatus
OLT?豸????״̬
up(1) - ?豸?????ṩҵ??
down(2) - ?豸??ֹ?ṩҵ??
testing(3) - ?豸???ڲ???״̬????״̬?¿????޷??????ṩҵ??
Enumerationr/w
Enumerated Values:
1up
2down
3testing
 .1.3.6.1.4.1.17409.2.3.1.2.1.1.4
oltDeviceUpTime
??OLT?豸????ʱ??
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.17409.2.3.1.2.1.1.5
oltDeviceNumOfTotalServiceSlot
Total number of service slots in the OLT device, including
service card, switch card, control card, uplink card, etc.
but except power, FAN, regardless whether the slot is installed
module
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.17409.2.3.1.2.1.1.6
oltDeviceNumOfTotalPowerSlot
Total number of power slots in the OLT device, regardless whether
the slot is installed module
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.17409.2.3.1.2.1.1.7
oltDeviceNumOfTotalFanSlot
Total number of FAN slots in the OLT device, regardless whether
the slot is installed module
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.17409.2.3.1.2.1.1.8
oltDeviceStyle
The device stype of either fixed or chassis based??
fixed(1) - such as pizza box
chassisBased(2) - Have number of slots for installing service card, power card, etc.
Enumeration
Enumerated Values:
1fixed
2chassisBased
3other
 .1.3.6.1.4.1.17409.2.3.1.2.1.1.9

boardTable

table
.1.3.6.1.4.1.17409.2.3.1.3.1 · 1 row entry · 15 columns
Open in standard view
Uses the fscom variant from /opt/observium/mibs/fscom.
Command help
Walk boardTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NSCRTV-EPON-SYSTEM-MIB' -M '/opt/observium/mibs/fscom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NSCRTV-EPON-SYSTEM-MIB::boardTable' 
OLT?忨??        
This table shall include rows for all slots, including the slots has
a presence state of 'NotInstalled'.
boardEntry row .1.3.6.1.4.1.17409.2.3.1.3.1.1
Indexes
Column Syntax OID
bDeviceIndex
OLT?豸?????š?
һ??OLT?ڵ?????ɶ?̨OLT?豸??ɡ??ڵ??ڵ?ÿ̨OLT?豸??OLT?豸??????Ψһ??ʶ
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.17409.2.3.1.3.1.1.1
bCardIndex
?忨??????
NSCRTV-EPONEOC-EPON-MIBEponCardIndex
Description:
?忨??????
For easy presenting the chassis view by NMS, bCardIndex shall be formatted
in a following manner:
Four bytes of INTEGER, from the most significant byte to the least signific…
 .1.3.6.1.4.1.17409.2.3.1.3.1.1.2
bType
?忨????
controlBoard(1) - ???ذ?
geponBoard(2) - GE EPON??
uplinkBoard(3) - ??????
switchBoard(4) - ?????壨???Ǵ??ڽ?????????ذ?ֿ????????
other(5) - δ֪???Ͱ忨
vacant(6) - ?忨δ????
control_uplink_board…
Enumeration
Enumerated Values:
1controlBoard
2geponBoard
3uplinkBoard
4switchBoard
5other
6vacant
7control_uplinkBoard
8pon_uplinkBoard
 .1.3.6.1.4.1.17409.2.3.1.3.1.1.3
bAttribute
?忨???? - ???????????ؿ??ͽ??????????????෽ʽ?µ?״̬

active(1) - ?ð忨Ϊ???ð忨
standby(2) - ?ð忨Ϊ???ð忨
standalone(3) - ??????????????????OLT?豸??֧?????ؿ??ͽ????????????෽ʽ
ʱ?Ĺ??…
Enumeration
Enumerated Values:
1active
2standby
3standalone
4notApplicable
 .1.3.6.1.4.1.17409.2.3.1.3.1.1.4
bOperationStatus
?忨????״̬

up(1) - ?ð忨?????ṩҵ??
down(2) - ?ð忨?޷??ṩҵ??
testing(3) - ?ð忨???ڲ???״̬????״̬?¿????޷??????ṩҵ??
Enumeration
Enumerated Values:
1up
2down
3testing
 .1.3.6.1.4.1.17409.2.3.1.3.1.1.5
bAdminStatus
?忨????״̬
up(1) - ?ð忨?????ṩҵ??
down(2) - ?ð忨??ֹ?ṩҵ??
testing(3) - ?ð忨???ڲ???״̬????״̬?¿????޷??????ṩҵ??
Enumerationr/w
Enumerated Values:
1up
2down
3testing
 .1.3.6.1.4.1.17409.2.3.1.3.1.1.6
bHardwareVersion
?忨Ӳ???汾
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.17409.2.3.1.3.1.1.7
bFirmwareVersion
?忨?̼??汾
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.17409.2.3.1.3.1.1.8
bSoftwareVersion
?忨?????汾
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.17409.2.3.1.3.1.1.9
bUpTime
?忨????ʱ??
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.17409.2.3.1.3.1.1.10
bAlarmStatus
?忨?澯״̬
Bits
Enumerated Values:
0critical
1major
2minor
3warning
 .1.3.6.1.4.1.17409.2.3.1.3.1.1.11
bSerialNumber
?忨SN
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.17409.2.3.1.3.1.1.12
bAction
?԰忨ʩ?ӵIJ???
noAction(1) - ??ʾû???κβ?????????Ĭ?????ú???????????ɺ?ָ?ֵ
switchover(2) - ?????л???ֻ??????ؿ??ͽ?????
upgrade(3) - ?忨????????
Enumerationr/w
Enumerated Values:
1noAction
2switchover
3upgrade
 .1.3.6.1.4.1.17409.2.3.1.3.1.1.13
bName
The board name defined by vendor individual
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.17409.2.3.1.3.1.1.14
bPresenceStatus
The physical presence status of the slot
Enumeration
Enumerated Values:
1installed
2notInstalled
3others
 .1.3.6.1.4.1.17409.2.3.1.3.1.1.15

powerPropertyTable

table
.1.3.6.1.4.1.17409.2.3.1.4.1 · 1 row entry · 8 columns
Open in standard view
Uses the fscom variant from /opt/observium/mibs/fscom.
Command help
Walk powerPropertyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NSCRTV-EPON-SYSTEM-MIB' -M '/opt/observium/mibs/fscom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NSCRTV-EPON-SYSTEM-MIB::powerPropertyTable' 
??Դ?????Ա?
powerPropertyEntry row .1.3.6.1.4.1.17409.2.3.1.4.1.1
Indexes
Column Syntax OID
powerDeviceIndex
OLT?豸?????š?
һ??OLT?ڵ?????ɶ?̨OLT?豸??ɡ??ڵ??ڵ?ÿ̨OLT?豸??OLT?豸??????Ψһ??ʶ
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.17409.2.3.1.4.1.1.1
powerCardIndex
?忨??????
NSCRTV-EPONEOC-EPON-MIBEponCardIndex
Description:
?忨??????
For easy presenting the chassis view by NMS, bCardIndex shall be formatted
in a following manner:
Four bytes of INTEGER, from the most significant byte to the least signific…
 .1.3.6.1.4.1.17409.2.3.1.4.1.1.2
powerCardOperationStatus
??Դ?????״̬
up(1) - ?ð忨?????ṩҵ??
down(2) - ?ð忨?޷??ṩҵ??
testing(3) - ?ð忨???ڲ???״̬????״̬?¿????޷??????ṩҵ??
Enumeration
Enumerated Values:
1up
2down
3testing
 .1.3.6.1.4.1.17409.2.3.1.4.1.1.3
powerCardAlarmStatus
??Դ??澯״̬
Bits
Enumerated Values:
0critical
1major
2minor
3warning
 .1.3.6.1.4.1.17409.2.3.1.4.1.1.4
powerCardAction
?Ե?Դ??ʩ?ӵIJ???
noAction(1) - ??ʾû???κβ?????????Ĭ?????ú???????????ɺ?ָ?ֵ
switchover(2) - ?????л????????Դ??????????ģʽ

Note:

Switchover(2) shall be only set to the power board with p…
Enumerationr/w
Enumerated Values:
1noAction
2switchover
 .1.3.6.1.4.1.17409.2.3.1.4.1.1.5
powerCardName
The power card name defined by vendor individual
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.17409.2.3.1.4.1.1.6
powerCardPresenceStatus
The physical presence status of the power slot
Enumeration
Enumerated Values:
1installed
2notInstalled
3others
 .1.3.6.1.4.1.17409.2.3.1.4.1.1.7
powerCardRedundancyStatus
The redundancy status of the power card??
active(1) - The power card is working on redundanct active/
Standby mode and the current role is active.
stanby(2) - The power card is working on redun…
Enumeration
Enumerated Values:
1active
2stanby
3standalone
4loadShareing
 .1.3.6.1.4.1.17409.2.3.1.4.1.1.8

fanPropertyTable

table
.1.3.6.1.4.1.17409.2.3.1.5.1 · 1 row entry · 6 columns
Open in standard view
Uses the fscom variant from /opt/observium/mibs/fscom.
Command help
Walk fanPropertyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NSCRTV-EPON-SYSTEM-MIB' -M '/opt/observium/mibs/fscom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NSCRTV-EPON-SYSTEM-MIB::fanPropertyTable' 
???????Ա?
fanPropertyEntry row .1.3.6.1.4.1.17409.2.3.1.5.1.1
Indexes
Column Syntax OID
fanDeviceIndex
OLT?豸?????š?
һ??OLT?ڵ?????ɶ?̨OLT?豸??ɡ??ڵ??ڵ?ÿ̨OLT?豸??OLT?豸??????Ψһ??ʶ
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.17409.2.3.1.5.1.1.1
fanCardIndex
?忨??????
NSCRTV-EPONEOC-EPON-MIBEponCardIndex
Description:
?忨??????
For easy presenting the chassis view by NMS, bCardIndex shall be formatted
in a following manner:
Four bytes of INTEGER, from the most significant byte to the least signific…
 .1.3.6.1.4.1.17409.2.3.1.5.1.1.2
fanCardOperationStatus
???Ȱ????״̬
up(1) - ?ð忨?????ṩҵ??
down(2) - ?ð忨?޷??ṩҵ??
testing(3) - ?ð忨???ڲ???״̬????״̬?¿????޷??????ṩҵ??
Enumeration
Enumerated Values:
1up
2down
3testing
 .1.3.6.1.4.1.17409.2.3.1.5.1.1.3
fanCardAlarmStatus
???Ȱ?澯״̬
Bits
Enumerated Values:
0critical
1major
2minor
3warning
 .1.3.6.1.4.1.17409.2.3.1.5.1.1.4
fanCardName
The FAN card name defined by vendor individual
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.17409.2.3.1.5.1.1.5
fanCardPresenceStatus
The physical presence status of the FAN card slot
Enumeration
Enumerated Values:
1installed
2notInstalled
3others
 .1.3.6.1.4.1.17409.2.3.1.5.1.1.6

fileTransferTable

table
.1.3.6.1.4.1.17409.2.3.1.6.1 · 1 row entry · 9 columns
Open in standard view
Uses the fscom variant from /opt/observium/mibs/fscom.
Command help
Walk fileTransferTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NSCRTV-EPON-SYSTEM-MIB' -M '/opt/observium/mibs/fscom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NSCRTV-EPON-SYSTEM-MIB::fileTransferTable' 
?ļ???????̱?
fileTransferEntry row .1.3.6.1.4.1.17409.2.3.1.6.1.1
Indexes
Column Syntax OID
fileTransferIndex
?ļ????ͽ?????ˮ??
Integer32
Constraints:
range: 1-10
 .1.3.6.1.4.1.17409.2.3.1.6.1.1.1
fileTransferProtocolType
?ý???ʹ?õ??ļ?????Э??????
Enumerationr/w
Enumerated Values:
1ftp
2tftp
 .1.3.6.1.4.1.17409.2.3.1.6.1.1.2
serverIpAddress
?ý???ʹ?õķ?????IP??ַ
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.17409.2.3.1.6.1.1.3
ftpUserName
?ý???ʹ?õ??û?????????????FTPЭ??
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.17409.2.3.1.6.1.1.4
ftpUserPassword
?ý???ʹ?õ????룬????????FTPЭ??
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.17409.2.3.1.6.1.1.5
transferFileSrcNamePath
?ý??̶?Ӧ???ļ?Դ????·???????确/tftproot/file/image.bin
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.17409.2.3.1.6.1.1.6
transferFileDstNamePath
?ý??̶?Ӧ???ļ?Ŀ??????·???????确/tftproot/file/image.bin
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.17409.2.3.1.6.1.1.7
transferAction
?ý??̶?Ӧ???ļ????䶯??
noOperation(1) - ??ʾû???κδ????????????Ĭ?????ú???????????ɺ?ָ?ֵ
put(2) - ?ϴ??ļ?
get(3) - ?????ļ?
halt(4) - ֹͣ?ļ?????
Enumerationr/w
Enumerated Values:
1noOperation
2put
3get
4halt
 .1.3.6.1.4.1.17409.2.3.1.6.1.1.8
transferStatus
?ý??̶?Ӧ???ļ?????״̬
idle(1) - ????
inProgress(2) - ???ڴ?????
success(3) - ???ͳɹ?
failure(4) - ????ʧ??
Enumeration
Enumerated Values:
1idle
2inProgress
3success
4failure
 .1.3.6.1.4.1.17409.2.3.1.6.1.1.9

fileInfoManagementTable

table
.1.3.6.1.4.1.17409.2.3.1.6.2 · 1 row entry · 6 columns
Open in standard view
Uses the fscom variant from /opt/observium/mibs/fscom.
Command help
Walk fileInfoManagementTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NSCRTV-EPON-SYSTEM-MIB' -M '/opt/observium/mibs/fscom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NSCRTV-EPON-SYSTEM-MIB::fileInfoManagementTable' 
OLT?ļ???Ϣ??????        
It is done by file list per directionary.        
Please walk filePath for the file lists in the specified
path. If leave it NULL or walk fileInfoManagementEntry,
the file list of the root directionary shall be returned
fileInfoManagementEntry row .1.3.6.1.4.1.17409.2.3.1.6.2.1
Indexes
Column Syntax OID
filePath
File path
It shall be started with a length octet, followed with path string. The length octet
shall indicate the number of character octets, excluding length itself.
For example, 0x05 41 42 43 44 45, re…
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.17409.2.3.1.6.2.1.1
fileName
File name. MUST not include '/' character and MUST not be NULL.
It shall be started with a length octet, followed with name string. The length octet
shall indicate the number of character octets, excluding lengt…
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.17409.2.3.1.6.2.1.2
fileSize
?ļ???С?????ֽ?Ϊ??λ
bytesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.17409.2.3.1.6.2.1.3
fileModifyTime
?ļ??޸?ʱ??
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.17409.2.3.1.6.2.1.4
fileManagementAction
???ļ?ʩ?ӵĶ???
noOperation(1) - ??ʾû???κδ????????????Ĭ?????ú???????????ɺ?ָ?ֵ
erase(2) - ?ļ?ɾ??
Enumerationr/w
Enumerated Values:
1noOperation
2erase
 .1.3.6.1.4.1.17409.2.3.1.6.2.1.5
fileAttribute
The attribute of the file
Enumeration
Enumerated Values:
1file
2dir
 .1.3.6.1.4.1.17409.2.3.1.6.2.1.6