NSCRTV-EPON-STP-MGM-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
34

stpGlobalSetTable

table
.1.3.6.1.4.1.17409.2.3.9.1 · 1 row entry · 17 columns
Open in standard view
Uses the fscom variant from /opt/observium/mibs/fscom.
Command help
Walk stpGlobalSetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NSCRTV-EPON-STP-MGM-MIB' -M '/opt/observium/mibs/fscom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NSCRTV-EPON-STP-MGM-MIB::stpGlobalSetTable' 
STPȫ?ֱ?
stpGlobalSetEntry row .1.3.6.1.4.1.17409.2.3.9.1.1
Indexes
Column Syntax OID
stpGlobalSetIndex
??????
For OLT - Set to corresponding device
For ONU - Set to 0
NSCRTV-EPONEOC-EPON-MIBEponDeviceIndex
Description:
Epon olt/onu?豸?????š?
ONU ID????ɣ?4?ֽڣ?????--?ͣ?
Olt device-8bit OLT Card-8bit Pon port-8bit OnuNUM-8bit
Note:
----
1. OLT device must not be 0.
2. Card here shall confirm the …
 .1.3.6.1.4.1.17409.2.3.9.1.1.1
stpGlobalSetVersion
??????Э??汾??
Enumerationr/w
Enumerated Values:
1rstp
2stp
 .1.3.6.1.4.1.17409.2.3.9.1.1.2
stpGlobalSetPriority
???ȼ???
??֧??IEEE 802.1d????IEEE 802.1w???????ϣ?ȡֵ??Χ??0-61440????????4096??
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.17409.2.3.9.1.1.3
stpGlobalSetTimeSinceTopologyChange
???ʱ?䣬????ʵ???⵽???һ?????˸ı?֮??????ʱ?䡣
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.17409.2.3.9.1.1.4
stpGlobalSetTopChanges
????????????????????ʼ???????˵ı????????
topology changesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.17409.2.3.9.1.1.5
stpGlobalSetDesignatedRoot
???ţ?ָ?????ŵ?BridgeId??
BRIDGE-MIBBridgeId
Type Constraints:
range: 8
 .1.3.6.1.4.1.17409.2.3.9.1.1.6
stpGlobalSetRootCost
??·???????????ŵ????ŵ?·?????ġ?
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.17409.2.3.9.1.1.7
stpGlobalSetRootPort
???˿ڣ??????ӱ????ź͸????ŵĶ˿ڣ????ṩ??·????????С
The port is presented by three octets, in sequence of device ID, slot,
and port.
For ONU, device ID is meaningless and shall set 0. Slot and port shall
be set to corresponding…
OctetString
Constraints:
range: 3-3
 .1.3.6.1.4.1.17409.2.3.9.1.1.8
stpGlobalSetMaxAge
?ϻ?ʱ?䣬?˿ڴ???????ѧϰ??????????Э????Ϣ???ϻ?ʱ?䣬??λ??1/100 secs??
centi-secondsBRIDGE-MIBTimeout .1.3.6.1.4.1.17409.2.3.9.1.1.9
stpGlobalSetHelloTime
???ķ??ͼ??????????????˿ڷ???????????PDU??ʱ??????
centi-secondsBRIDGE-MIBTimeout .1.3.6.1.4.1.17409.2.3.9.1.1.10
stpGlobalSetHoldTime
ά??ʱ?䣬?????ʱ?????ڣ??????Ų??ᷢ??????????????????PDU??
centi-secondsInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.17409.2.3.9.1.1.11
stpGlobalSetForwardDelay
ת??ʱ?ӣ?????һ???˿ڶ??ظı??Լ???????״̬???????˱??˿ڿ?ʼת??ǰ???ڼ???״̬??ѧϰ״̬?????೤ʱ?䡣
??һ??????һ?????˱???????????ڴ???ʱ?????ֵҲ???????ƶ?̬???˱????ϻ?ʱ?䡣
centi-secondsBRIDGE-MIBTimeout .1.3.6.1.4.1.17409.2.3.9.1.1.12
stpGlobalSetBridgeMaxAge
??????????Ǹ????ţ???ô???????Ű????ֵ?????ϻ?ʱ?䡣
centi-secondsBRIDGE-MIBTimeoutr/w
Constraints:
range: 600-4000
 .1.3.6.1.4.1.17409.2.3.9.1.1.13
stpGlobalSetBridgeHelloTime
??????????Ǹ????ţ???ô???????Ű????ֵ???????ķ??͵?ʱ??????
centi-secondsBRIDGE-MIBTimeoutr/w
Constraints:
range: 100-1000
 .1.3.6.1.4.1.17409.2.3.9.1.1.14
stpGlobalSetBridgeForwardDelay
??????????Ǹ????ţ???ô???????Ű????ֵ????ת??ʱ?ӡ?
centi-secondsBRIDGE-MIBTimeoutr/w
Constraints:
range: 400-3000
 .1.3.6.1.4.1.17409.2.3.9.1.1.15
stpGlobalSetRstpTxHoldCount
???????٣???RSTP?????????ƶ˿ڵı??ķ??????ʡ?
Integer32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.17409.2.3.9.1.1.16
stpGlobalSetEnable
ʹ??״̬?????û?ر?STP??true(1)Ϊ??????
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.17409.2.3.9.1.1.17

stpPortTable

table
.1.3.6.1.4.1.17409.2.3.9.2 · 1 row entry · 17 columns
Open in standard view
Uses the fscom variant from /opt/observium/mibs/fscom.
Command help
Walk stpPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NSCRTV-EPON-STP-MGM-MIB' -M '/opt/observium/mibs/fscom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NSCRTV-EPON-STP-MGM-MIB::stpPortTable' 
STP?˿ڱ?
stpPortEntry row .1.3.6.1.4.1.17409.2.3.9.2.1
Indexes
Column Syntax OID
stpPortStpIndex
?????š?
For OLT - Set to corresponding device/SLOT/PORT
For ONU - Set to 0
NSCRTV-EPONEOC-EPON-MIBEponDeviceIndex
Description:
Epon olt/onu?豸?????š?
ONU ID????ɣ?4?ֽڣ?????--?ͣ?
Olt device-8bit OLT Card-8bit Pon port-8bit OnuNUM-8bit
Note:
----
1. OLT device must not be 0.
2. Card here shall confirm the …
 .1.3.6.1.4.1.17409.2.3.9.2.1.1
stpPortCardIndex
Epon?忨??????
For OLT, set to 0
For ONU, set to correspond card index
NSCRTV-EPONEOC-EPON-MIBEponCardIndex
Description:
?忨??????
For easy presenting the chassis view by NMS, bCardIndex shall be formatted
in a following manner:
Four bytes of INTEGER, from the most significant byte to the least signific…
 .1.3.6.1.4.1.17409.2.3.9.2.1.2
stpPortIndex
?˿ںţ???OLTΪSNI/PON port????ONUΪUNI?˿ںš?
For OLT, set to 0
For ONU, set to correspond port index
NSCRTV-EPONEOC-EPON-MIBEponPortIndex
Type Constraints:
range: 0..255
Description:
Epon?˿???????
The device port number shall start from 1. Nunber 0 had specific meaning, stands
for portIndex is meaningless, for the situation defined.
 .1.3.6.1.4.1.17409.2.3.9.2.1.3
stpPortStatus
?˿?״̬??????????Э???Ӧ?ó????壬???ڱ?????STP?Ķ˿ڣ????״̬Ӧ??Ϊdisable??
Enumeration
Enumerated Values:
1disabled
2blocking
3listening
4learning
5forwarding
6broken
 .1.3.6.1.4.1.17409.2.3.9.2.1.4
stpPortPriority
?˿????ȼ?
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.17409.2.3.9.2.1.5
stpPortPathCost
?˿?·???????????˿???ͨ????????????·???????ӵ?·??????802.1D-1998?Ƽ??????????Ĭ??ֵ??????LAN???ٶȳɷ??ȡ?
Integer32r/w
Constraints:
range: 1-200000000
 .1.3.6.1.4.1.17409.2.3.9.2.1.6
stpPortDesignatedRoot
ָ???????ţ???????BPDU?б???¼Ϊ???????ŵı?ʶ??????Щ????BPDU??ָ?????ŷ??ͣ???ָ?????????ڸ?????˿??????????Ρ?
BRIDGE-MIBBridgeId
Type Constraints:
range: 8
 .1.3.6.1.4.1.17409.2.3.9.2.1.7
stpPortDesignatedCost
ָ??·?????????????˿??????????ε?ָ???˿ڵ?·?????ģ????ֵ??????ܵ???????PDU?еĸ?·???????ֶν??бȽϡ?
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.17409.2.3.9.2.1.8
stpPortDesignatedBridge
ָ??????ID?????˿???Ϊ?ı??˿ڵ????ε?ָ?????ŵı?ʶ????
BRIDGE-MIBBridgeId
Type Constraints:
range: 8
 .1.3.6.1.4.1.17409.2.3.9.2.1.9
stpPortDesignatedPort
ָ???˿ڣ?ָ???????????ڱ??˿????εĶ˿ڵı?ʶ????
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.17409.2.3.9.2.1.10
stpPortForwardTransitions
???˿??Ѿ???ѧϰ״̬ת?䵽ת??״̬??ʱ?䡣
secondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.17409.2.3.9.2.1.11
stpPortRstpProtocolMigration
Э??Ǩ?ƣ??????????RSTPģʽ????????ڵ?????ΪTRUE(1)??ǿ??????˿ڷ???RSTP BPDU???????????⣬?ܷ???FALSE(2)??
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.17409.2.3.9.2.1.12
stpPortRstpAdminEdgePort
??Ե?˿ڹ???״̬??ָ???ö˿??Ƿ?Ϊ??Ե?˿ڣ????øýڵ㽫??????Ӧ??stpPortRstpOperEdgePort?ڵ????ó?ͬ????ֵ??
?????ó?true(1)?????˿????յ?һ??BPDUʱ??stpPortRstpOperEdgePort?????false(2)??
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.17409.2.3.9.2.1.13
stpPortRstpOperEdgePort
??Ե?˿?״̬??????ڵ㱻??ʼ????stpPortRstpAdminEdgePort??ֵ?????յ?һ??BPDUʱ?????ó?false(2)??
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.17409.2.3.9.2.1.14
stpPortPointToPointAdminStatus
???ӵ????˿????εĵ?Ե????״̬??
Enumerationr/w
Enumerated Values:
0forceFalse
1forceTrue
2auto
 .1.3.6.1.4.1.17409.2.3.9.2.1.15
stpPortPointToPointOperStatus
???ӵ????˿????εĵ?Ե?ʵ??״̬??
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.17409.2.3.9.2.1.16
stpPortEnabled
?˿?ʹ??״̬??true(1)Ϊ??????
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.17409.2.3.9.2.1.17