NORTEL-OME40G-FAC-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
100

nnOCnTable

table
.1.3.6.1.4.1.562.68.11.3.1.1.1 · 1 row entry · 20 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk nnOCnTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NORTEL-OME40G-FAC-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NORTEL-OME40G-FAC-MIB::nnOCnTable' 
Contains entries for OC192 and OC768 facilities
nnOCnEntry row .1.3.6.1.4.1.562.68.11.3.1.1.1.1
This entry shall contain all the necessary attributes
for the OC768 and OC192 facilities in the 40G card
Indexes
Column Syntax OID
ocnRowStatus
This attribute is used to manage rows in the
facility entry
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.562.68.11.3.1.1.1.1.1
stFormat
Section trace format
Enumerationr/w
Enumerated Values:
0unknown
1num
2string
 .1.3.6.1.4.1.562.68.11.3.1.1.1.1.2
expSTrc
Expected section trace
RFC1213-MIBDisplayStringr/w .1.3.6.1.4.1.562.68.11.3.1.1.1.1.3
stfMode
Section trace alarming mode
Enumerationr/w
Enumerated Values:
0unknown
1off
2almonly
 .1.3.6.1.4.1.562.68.11.3.1.1.1.1.4
eBerTh
Excessive Bit rate threshold
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.562.68.11.3.1.1.1.1.5
ocnPortMode
Port mode can eithter be SONET or SDH
Enumerationr/w
Enumerated Values:
0unknown
1sonet
2sdh
 .1.3.6.1.4.1.562.68.11.3.1.1.1.1.6
ocnLaserOffFarEndFail
It can either be Enabled or Disabled.
Statusr/w
Type Values:
0unknown
1enabled
2disabled
 .1.3.6.1.4.1.562.68.11.3.1.1.1.1.7
oChTxActOcnPwr
Actual Optical Channel transmit power.
This variable is available upon GET-EXACT operations. No
value is returned with GET-NEXT.
RFC1213-MIBDisplayString .1.3.6.1.4.1.562.68.11.3.1.1.1.1.8
oChTxMinOcnPwr
Minimum Optical Channel transmit power
RFC1213-MIBDisplayString .1.3.6.1.4.1.562.68.11.3.1.1.1.1.9
oChTxMaxOcnPwr
Maximum Optical Channel transmit power
RFC1213-MIBDisplayString .1.3.6.1.4.1.562.68.11.3.1.1.1.1.10
oChRxActOcnPwr
Actual Optical Channel receive power.
This variable is available upon GET-EXACT operations. No
value is returned with GET-NEXT.
RFC1213-MIBDisplayString .1.3.6.1.4.1.562.68.11.3.1.1.1.1.11
oChRxMinOcnPwr
Minimum Optical Channel receive power.
RFC1213-MIBDisplayString .1.3.6.1.4.1.562.68.11.3.1.1.1.1.12
oChRxMaxOcnPwr
Maximum Optical Channel receive power.
RFC1213-MIBDisplayString .1.3.6.1.4.1.562.68.11.3.1.1.1.1.13
expSectionTraceMsg
Expected section trace message.
This variable contains data during GET
operations only. GET-NEXT returns No Assigned Value
RFC1213-MIBDisplayString .1.3.6.1.4.1.562.68.11.3.1.1.1.1.14
incSectionTraceMsg
Incoming section trace message
This variable contains data during GET
operations only. GET-NEXT returns No Assigned Value
RFC1213-MIBDisplayString .1.3.6.1.4.1.562.68.11.3.1.1.1.1.15
ocnLoopbackType
Nothing is returned if Loopback is not active;
otherwise the facility is returned.
LoopbackTyper/w
Type Values:
0unknown
1none
2facility
3terminal
4efmremote
 .1.3.6.1.4.1.562.68.11.3.1.1.1.1.16
ocnPrimaryState
Primary State of the faciltiy. Can only be modified
by changing the admin state.
PrimaryState
Type Values:
0unknown
1is
2is-anr
3oos-au
4oos-ma
5oos-auma
6oos-maanr
 .1.3.6.1.4.1.562.68.11.3.1.1.1.1.17
ocnSecondaryState
Secondary state for the facility. A facility can have
more than one secondary state as different combinations
of the individual secondary state. It is represented
as a string to capture all the combinations. Those
comb…
RFC1213-MIBDisplayString .1.3.6.1.4.1.562.68.11.3.1.1.1.1.18
ocnAdminState
This is a write-only variable. The user can restore
or remove facilities using this command. You restore
a facility by setting this variable to IS and remove
it by setting it to OOS. During Row-create, a user can
use t…
AdminStater/w
Type Values:
0unknown
1is
2oos
 .1.3.6.1.4.1.562.68.11.3.1.1.1.1.19
ocnAID
Facility AID as received from TL1. This should include
the FAC type, shelf id, slot, and port.
RFC1213-MIBDisplayString .1.3.6.1.4.1.562.68.11.3.1.1.1.1.20

nnOTMnTable

table
.1.3.6.1.4.1.562.68.11.3.1.2.1 · 1 row entry · 51 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk nnOTMnTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NORTEL-OME40G-FAC-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NORTEL-OME40G-FAC-MIB::nnOTMnTable' 
Contains entries for the OTM2/3 facilities
nnOTMnEntry row .1.3.6.1.4.1.562.68.11.3.1.2.1.1
An Entry for the OTM2/3 facilities
Indexes
Column Syntax OID
otmRowStatus
Used to create/delete, put in service and out of
service, and edit.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.562.68.11.3.1.2.1.1.1
osid
Optical Service ID
RFC1213-MIBDisplayStringr/w .1.3.6.1.4.1.562.68.11.3.1.2.1.1.2
otuTxFecFmt
OTU transmit FEC format
FecFormatr/w
Type Values:
0unknown
1off
2rs8
3scfec
4bch20
5pfec
 .1.3.6.1.4.1.562.68.11.3.1.2.1.1.3
otuRxFecFmt
OTU receive FEC format
FecFormatr/w
Type Values:
0unknown
1off
2rs8
3scfec
4bch20
5pfec
 .1.3.6.1.4.1.562.68.11.3.1.2.1.1.4
oduTerm
Indicates whether or not ODU TTI is terminated
on this OTMn facility. Possible values are
ODUTTITERM for OTM2 or ODUTERM for OTM3.
Enumeration
Enumerated Values:
0unknown
1yes
2no
 .1.3.6.1.4.1.562.68.11.3.1.2.1.1.5
otuTxTTI
OTU transmit trail trace identifier.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.562.68.11.3.1.2.1.1.6
oduTxTTI
ODU transmit trail trace identifier.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.562.68.11.3.1.2.1.1.7
otuRxExpTTI
OTU receive trail trace identifier.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.562.68.11.3.1.2.1.1.8
oduRxExpTTI
ODU receive trail trace identifer.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.562.68.11.3.1.2.1.1.9
txPathId
Transmit path identifier
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.562.68.11.3.1.2.1.1.10
oChTxPwr
Provisioned output power
RFC1213-MIBDisplayStringr/w .1.3.6.1.4.1.562.68.11.3.1.2.1.1.11
oChTxActOtmPwr
Actual optical channel transmit power.
This variable is available upon GET-EXACT operations. No
value is returned with GET-NEXT.
RFC1213-MIBDisplayString .1.3.6.1.4.1.562.68.11.3.1.2.1.1.12
oChTxMinOtmPwr
Minimum transmit power.
RFC1213-MIBDisplayString .1.3.6.1.4.1.562.68.11.3.1.2.1.1.13
oChTxMaxOtmPwr
Maximum transmit power.
RFC1213-MIBDisplayString .1.3.6.1.4.1.562.68.11.3.1.2.1.1.14
oChRxActOtmPwr
Actual receive power
This variable is available upon GET-EXACT operations. No
value is returned with GET-NEXT.
RFC1213-MIBDisplayString .1.3.6.1.4.1.562.68.11.3.1.2.1.1.15
oChRxMinOtmPwr
Minimum receive power
RFC1213-MIBDisplayString .1.3.6.1.4.1.562.68.11.3.1.2.1.1.16
oChRxMaxOtmPwr
Maximum receive power
RFC1213-MIBDisplayString .1.3.6.1.4.1.562.68.11.3.1.2.1.1.17
oChTxWvlngthProv
Provisioned transmit wavelength
RFC1213-MIBDisplayStringr/w .1.3.6.1.4.1.562.68.11.3.1.2.1.1.18
oChTxWvlngthMin
Minimum transmit wavelength
RFC1213-MIBDisplayString .1.3.6.1.4.1.562.68.11.3.1.2.1.1.19
oChTxWvlngthMax
Maximum Transmit wavelength
RFC1213-MIBDisplayString .1.3.6.1.4.1.562.68.11.3.1.2.1.1.20
oChTxWvlngthSpacing
Transmit wavelength spacing
RFC1213-MIBDisplayString .1.3.6.1.4.1.562.68.11.3.1.2.1.1.21
oChRxActDisp
Actual receive dispersion.
Data for this variable is only available from
the subtending card. This data is retrieved from
the SP with GET-NEXT. When there is no real-hardware
the GET request will get no data and GET-NE…
RFC1213-MIBDisplayString .1.3.6.1.4.1.562.68.11.3.1.2.1.1.22
oChRxActPmd
Actual receive polarization mode dispersion (PMD)
This variable is available upon GET-EXACT operations. No
value is returned with GET-NEXT.
RFC1213-MIBDisplayString .1.3.6.1.4.1.562.68.11.3.1.2.1.1.23
oChRxPmdMax
Maximum receive PMD
RFC1213-MIBDisplayString .1.3.6.1.4.1.562.68.11.3.1.2.1.1.24
oChRxEchoTrace
Data for this variable is only available from
the subtending card. This data is retrieved from
the SP with GET-NEXT. When there is no real-hardware
the GET request will get no data and GET-NEXT will
return SP data (most…
RFC1213-MIBDisplayString .1.3.6.1.4.1.562.68.11.3.1.2.1.1.25
oChTxTrace
Data for this variable is only available from
the subtending card. This data is retrieved from
the SP with GET-NEXT. When there is no real-hardware
the GET request will get no data and GET-NEXT will
return SP data (most…
RFC1213-MIBDisplayString .1.3.6.1.4.1.562.68.11.3.1.2.1.1.26
oChTxAssocFarEndRx
Data for this variable is only available from
the subtending card. This data is retrieved from
the SP with GET-NEXT. When there is no real-hardware
the GET request will get no data and GET-NEXT will
return SP data (most…
RFC1213-MIBDisplayString .1.3.6.1.4.1.562.68.11.3.1.2.1.1.27
otmPortMode
 Enumerationr/w
Enumerated Values:
0unknown
1sonet
2sdh
 .1.3.6.1.4.1.562.68.11.3.1.2.1.1.28
tfMode
Trace alarm mode
Enumerationr/w
Enumerated Values:
0unknown
1off
2almonly
3linefail
 .1.3.6.1.4.1.562.68.11.3.1.2.1.1.29
oduTfMode
ODU trace alarm enable/disable
Enumerationr/w
Enumerated Values:
0unknown
1off
2almonly
 .1.3.6.1.4.1.562.68.11.3.1.2.1.1.30
otmLaserOffFarEndFail
Always enabled in Release 5.1
Statusr/w
Type Values:
0unknown
1enabled
2disabled
 .1.3.6.1.4.1.562.68.11.3.1.2.1.1.31
preFecSigFailThreshLevel
Pre FEC Signal Fail Threshold Level
RFC1213-MIBDisplayStringr/w .1.3.6.1.4.1.562.68.11.3.1.2.1.1.32
otuSignalDegradeThreshLevel
OTU Signal Degrade Threshold Level
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.562.68.11.3.1.2.1.1.33
oduMonitorEnabled
Beware of overloading ODUMONITOR in RTRV-TTI and
RTRV-OTM3
Enumeration
Enumerated Values:
0unknown
1yes
2no
 .1.3.6.1.4.1.562.68.11.3.1.2.1.1.34
lineRate
Line Rate to be specified at create time only.
Enumerationr/w
Enumerated Values:
0rate-uknown
1rate-44G5
2rate-9G95
3rate-10G709
4rate-11G05
5rate-11G09
 .1.3.6.1.4.1.562.68.11.3.1.2.1.1.35
otuExpTTI
Expected incoming OTU TTI message.
This variable is not available during table view,
walk, or any get-next operation. It only has data
on specific GET requsets to the facility.
RFC1213-MIBDisplayString .1.3.6.1.4.1.562.68.11.3.1.2.1.1.36
otuRxIncTTI
Receive OTU TTI message
This variable is not available during table view,
walk, or any get-next operation. It only has data
on specific GET requsets to the facility.
RFC1213-MIBDisplayString .1.3.6.1.4.1.562.68.11.3.1.2.1.1.37
oduRxIncTTI
Receive ODU TTI message
This variable is not available during table view,
walk, or any get-next operation. It only has data
on specific GET requsets to the facility.
RFC1213-MIBDisplayString .1.3.6.1.4.1.562.68.11.3.1.2.1.1.38
oduMonitorMsg
ODU monitoring message
This variable is not available during table view,
walk, or any get-next operation. It only has data
on specific GET requsets to the facility.
RFC1213-MIBDisplayString .1.3.6.1.4.1.562.68.11.3.1.2.1.1.39
otmLoopbackType
Facility if loopback is active; otherwise, nothing is
returned for this attribute
LoopbackTyper/w
Type Values:
0unknown
1none
2facility
3terminal
4efmremote
 .1.3.6.1.4.1.562.68.11.3.1.2.1.1.40
opu2reserved
YES/NO to using 7 overhead bytes for payload
Enumeration
Enumerated Values:
0unknown
1yes
2no
 .1.3.6.1.4.1.562.68.11.3.1.2.1.1.41
expectedPayloadType
This is received as a HEX value from TL1. The
ranges are 0..FF. Since HEX can not be represented
in ASN.1, a string is used. For SET operations, the
user can enter any valid HEX value from the range 0x0
to 0xFF. The v…
OctetStringr/w
Constraints:
range: 1-2
 .1.3.6.1.4.1.562.68.11.3.1.2.1.1.42
transmittedPayloadType
This is received as a HEX value from TL1. The
ranges are 0..FF. Since HEX can not be represented
in ASN.1, a string is used. For SET operations, the
user can enter any valid HEX value from the range 0x0
to 0xFF. The v…
OctetStringr/w
Constraints:
range: 1-2
 .1.3.6.1.4.1.562.68.11.3.1.2.1.1.43
receivedPayloadType
This is received as a HEX value from TL1. The
ranges are 0..FF. Since HEX can not be represented
in ASN.1, a string is used.
This variable is available upon GET-EXACT operations. No
value is returned with GET-NEXT.
OctetString
Constraints:
range: 1-2
 .1.3.6.1.4.1.562.68.11.3.1.2.1.1.44
otmPrimaryState
Primary State of the faciltiy. Can only be modified
by changing the admin state.
PrimaryState
Type Values:
0unknown
1is
2is-anr
3oos-au
4oos-ma
5oos-auma
6oos-maanr
 .1.3.6.1.4.1.562.68.11.3.1.2.1.1.45
otmSecondaryState
Secondary state for the facility. A facility can have
more than one secondary state as different combinations
of the individual secondary state. It is represented
as a string to capture all the combinations. Those
comb…
RFC1213-MIBDisplayString .1.3.6.1.4.1.562.68.11.3.1.2.1.1.46
otmAdminState
This is a write-only variable. The user can restore
or remove facilities using this command. You restore
a facility by setting this variable to IS and remove
it by setting it to OOS. During Row-create, a user can
use t…
AdminStater/w
Type Values:
0unknown
1is
2oos
 .1.3.6.1.4.1.562.68.11.3.1.2.1.1.47
otmAID
Facility AID as received from TL1. This should include
the FAC type, shelf id, slot, and port.
RFC1213-MIBDisplayString .1.3.6.1.4.1.562.68.11.3.1.2.1.1.48
otmGCC
A Get operation on this variable retrieves the
LLSDCC Carrier GCC value. Setting this variable to NONE
removes OSPF circuit and LLSDCC carrier info. It is
a NO-op if the GCC is initially NONE. Setting the
variable to…
GccValuesr/w
Type Values:
0unknown
1none
2gcc0
3gcc1
4gcc2
 .1.3.6.1.4.1.562.68.11.3.1.2.1.1.49
ospfCircuit
With GET operations, this variable shall return the
configured parameters of the OSPF circuit. In this
release only the NETAREA is supported. With SET
operations, the NETAREA is to be supplied in the
format x.x.x.x. If…
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.562.68.11.3.1.2.1.1.50
oChDifferentialEncoding
 Enumerationr/w
Enumerated Values:
0unknown
1none
2hard
3soft
 .1.3.6.1.4.1.562.68.11.3.1.2.1.1.51

nnEthTable

table
.1.3.6.1.4.1.562.68.11.3.1.3.1 · 1 row entry · 17 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk nnEthTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NORTEL-OME40G-FAC-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NORTEL-OME40G-FAC-MIB::nnEthTable' 
Contains entries for ethernet 10G facilities
nnEthEntry row .1.3.6.1.4.1.562.68.11.3.1.3.1.1
This entry shall contain all the necessary attributes
for the ethernet 10G facilities in the 40G card
Indexes
Column Syntax OID
ethRowStatus
Create, delete, put in service, out of service, and edit
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.562.68.11.3.1.3.1.1.1
ethLaserOffFarEndFail
To turn off Tx laser under certain failure scenarios
Statusr/w
Type Values:
0unknown
1enabled
2disabled
 .1.3.6.1.4.1.562.68.11.3.1.3.1.1.2
oChTxActEthPwr
The target will be of the format xx.x and dBm will be
assumed for powers within design/accuracy range.
Powers outside the accuracy/design range will be clamped
at: OOR-HI or OOR-LO (out of range high and low
respectiv…
RFC1213-MIBDisplayString .1.3.6.1.4.1.562.68.11.3.1.3.1.1.3
oChTxMinEthPwr
The target will be of the format xx.x and dBm will
be assumed
RFC1213-MIBDisplayString .1.3.6.1.4.1.562.68.11.3.1.3.1.1.4
oChTxMaxEthPwr
The target will be of the format xx.x and dBm will
be assumed
RFC1213-MIBDisplayString .1.3.6.1.4.1.562.68.11.3.1.3.1.1.5
oChRxActEthPwr
The target will be of the format xx.x and dBm will be
assumed for powers within design/accuracy range.
Powers outside the accuracy/design range will be clamped
at: OOR-HI or OOR-LO (out of range high and low
respectiv…
RFC1213-MIBDisplayString .1.3.6.1.4.1.562.68.11.3.1.3.1.1.6
oChRxMinEthPwr
The target will be of the format xx.x and dBm will
be assumed
RFC1213-MIBDisplayString .1.3.6.1.4.1.562.68.11.3.1.3.1.1.7
oChRxMaxEthPwr
The target will be of the format xx.x and dBm will
be assumed
RFC1213-MIBDisplayString .1.3.6.1.4.1.562.68.11.3.1.3.1.1.8
maxTransUnit
Maximum transmission unit
Enumerationr/w
Enumerated Values:
0mtu-unknown
1mtu-1600
2mtu-9600
 .1.3.6.1.4.1.562.68.11.3.1.3.1.1.9
flowControl
 Enumerationr/w
Enumerated Values:
0unknown
1none
2asymmetric
3symmetric
4preeemptive
 .1.3.6.1.4.1.562.68.11.3.1.3.1.1.10
equipment
 Enumerationr/w
Enumerated Values:
0xge-unknown
1xge-lan
2xge-wan
 .1.3.6.1.4.1.562.68.11.3.1.3.1.1.11
ethMapping
Sets the non-client OTM2 OTU rate and client mapping
Enumerationr/w
Enumerated Values:
0unknown
1prop237
2prop238
3gfp-mactr
4gfp-std
5gfp-mactr192
6gfp-std192
7gfp-mactr64
8gfp-std64
9gfp-macostr
10gfp-macostr192
11gfp-macostr64
12ull
 .1.3.6.1.4.1.562.68.11.3.1.3.1.1.12
ethLoopbackType
Facility if loopback is active; otherwise nothing is
returned for this attribute.
LoopbackTyper/w
Type Values:
0unknown
1none
2facility
3terminal
4efmremote
 .1.3.6.1.4.1.562.68.11.3.1.3.1.1.13
ethPrimaryState
Primary State of the faciltiy. Can only be modified
by changing the admin state.
PrimaryState
Type Values:
0unknown
1is
2is-anr
3oos-au
4oos-ma
5oos-auma
6oos-maanr
 .1.3.6.1.4.1.562.68.11.3.1.3.1.1.14
ethSecondaryState
Secondary state for the facility. A facility can have
more than one secondary state as different combinations
of the individual secondary state. It is represented
as a string to capture all the combinations. Those
comb…
RFC1213-MIBDisplayString .1.3.6.1.4.1.562.68.11.3.1.3.1.1.15
ethAdminState
This is a write-only variable. The user can restore
or remove facilities using this command. You restore
a facility by setting this variable to IS and remove
it by setting it to OOS. During Row-create, a user can
use t…
AdminStater/w
Type Values:
0unknown
1is
2oos
 .1.3.6.1.4.1.562.68.11.3.1.3.1.1.16
ethAID
Facility AID as received from TL1. This should include
the FAC type, shelf id, slot, and port.
RFC1213-MIBDisplayString .1.3.6.1.4.1.562.68.11.3.1.3.1.1.17

nnWanTable

table
.1.3.6.1.4.1.562.68.11.3.1.4.1 · 1 row entry · 12 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk nnWanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NORTEL-OME40G-FAC-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NORTEL-OME40G-FAC-MIB::nnWanTable' 
Contains entries for ethernet 10G facilities
nnWanEntry row .1.3.6.1.4.1.562.68.11.3.1.4.1.1
This entry shall contain all the necessary attributes
for the ethernet 10G facilities in the 40G card
Indexes
Column Syntax OID
frameChecksum
For mapping=GFP-F, value can be 0 or 32
Integer32r/w
Constraints:
range: 0-0
range: 16-16
range: 32-32
 .1.3.6.1.4.1.562.68.11.3.1.4.1.1.1
wanMapping
GFP-F is only supported value
Enumerationr/w
Enumerated Values:
0unknown
1gfp-f
2gfp-t
 .1.3.6.1.4.1.562.68.11.3.1.4.1.1.2
gfpRfi
Enable/Disable
Enumerationr/w
Enumerated Values:
0unknown
1enable
2disable
 .1.3.6.1.4.1.562.68.11.3.1.4.1.1.3
gfpRtDelay
Enable/Disable
Enumerationr/w
Enumerated Values:
0unknown
1enable
2disable
 .1.3.6.1.4.1.562.68.11.3.1.4.1.1.4
condType
GFP CMF is the only supported value.
Enumerationr/w
Enumerated Values:
0unknown
1gfpcmf
 .1.3.6.1.4.1.562.68.11.3.1.4.1.1.5
preamble
KEEP/DISCARD ethernet preamble
Enumerationr/w
Enumerated Values:
0unknown
1keep
2discard
 .1.3.6.1.4.1.562.68.11.3.1.4.1.1.6
fcsErrFrames
KEEP/DISCARD FCS-errored frames end-to-end.
Enumerationr/w
Enumerated Values:
0unknown
1keep
2discard
 .1.3.6.1.4.1.562.68.11.3.1.4.1.1.7
transmittedUPI
This is received as a HEX value from TL1. The
ranges are 0..FF. Since HEX can not be represented
in ASN.1, a string is used. For SET operations, the
user can enter any valid HEX value from the range 0x0
to 0xFF. The v…
OctetStringr/w
Constraints:
range: 1-2
 .1.3.6.1.4.1.562.68.11.3.1.4.1.1.8
wanPrimaryState
Primary State of the faciltiy. Can only be modified
by changing the admin state.
PrimaryState
Type Values:
0unknown
1is
2is-anr
3oos-au
4oos-ma
5oos-auma
6oos-maanr
 .1.3.6.1.4.1.562.68.11.3.1.4.1.1.9
wanSecondaryState
Secondary state for the facility. A facility can have
more than one secondary state as different combinations
of the individual secondary state. It is represented
as a string to capture all the combinations. Those
comb…
RFC1213-MIBDisplayString .1.3.6.1.4.1.562.68.11.3.1.4.1.1.10
wanAdminState
This is a write-only variable. The user can restore
or remove facilities using this command. You restore
a facility by setting this variable to IS and remove
it by setting it to OOS. During Row-create, a user can
use t…
AdminStater/w
Type Values:
0unknown
1is
2oos
 .1.3.6.1.4.1.562.68.11.3.1.4.1.1.11
wanAID
Facility AID as received from TL1. This should include
the FAC type, shelf id, slot, and port.
RFC1213-MIBDisplayString .1.3.6.1.4.1.562.68.11.3.1.4.1.1.12