NG700-POWER-ETHERNET-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
3
Rows
3
Columns
13
agentPethPsePortTable
table.1.3.6.1.4.1.4526.11.15.1.1
·
1 row entry
·
10 columns
Uses the netgear variant from
Command help
/opt/observium/mibs/netgear.
Walk agentPethPsePortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NG700-POWER-ETHERNET-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NG700-POWER-ETHERNET-MIB::agentPethPsePortTable'
A table of per-port information and configuration objects relating to the power status of each port.
A collection of objects providing additional power information
and control parameters for the specified port.
and control parameters for the specified port.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| agentPethPowerLimitThe configured maximum power this port can provide to an attached device measured in Milliwatts. | MilliwattsSNMPv2-SMIGauge32r/w Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.4526.11.15.1.1.1.1 | ||||||||||||
| agentPethOutputPowerThe power this port is supplying to an attached device measured in Milliwatts. | MilliwattsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.4526.11.15.1.1.1.2 | ||||||||||||
| agentPethOutputCurrentThe current this port is supplying to an attached device measured in Milliamps. | MilliampsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.4526.11.15.1.1.1.3 | ||||||||||||
| agentPethOutputVoltsThe voltage this port is supplying to an attached device measured in Volts. | VoltsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.4526.11.15.1.1.1.4 | ||||||||||||
| agentPethTemperatureThe temperature measured at this port of the PoE Controller. It is measured in degree celcius. | DEGREESSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.4526.11.15.1.1.1.5 | ||||||||||||
| agentPethPowerLimitTypeDescribes or controls the maximum power that a port can deliver A value of dot3af(1) means that the port power limit is as per the dot3af class of the PD attached. A value of user(2) means that the port power limit is e… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.4526.11.15.1.1.1.6 | ||||||||||||
| agentPethHighPowerEnabletrue (1) The PSE port can deliver power up to 32Watts. false(2) The PSE port can deliver power up to 18Watts | SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.4526.11.15.1.1.1.7 | ||||||||||||
| agentPethPowerDetectionTypeDescribes PD detection mechanism performed by the PSE port. A value of none(0) means no detection is done. A value of legacy(1) means only legacy capacitive detection scheme is used. A value of 4ptdot3afonly(2) means th… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.4526.11.15.1.1.1.8 | ||||||||||||
| agentPethFaultStatusDescribes the error description when the pse port is in fault status. A value of none(0) specifies that the pse port is not in any error state. A value of mpsAbsent(1) specifies that the pse port has detected and absenc… | Enumeration Enumerated Values:
| .1.3.6.1.4.1.4526.11.15.1.1.1.9 | ||||||||||||
| agentPethPortResetA value of reset(1) is used to move the pse port dot3af state to idle. A read on this object will always return the value none(0). The value none(0) can not be forcibly set by the administrtor. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.4526.11.15.1.1.1.10 |
agentPethMainPseTable
table.1.3.6.1.4.1.4526.11.15.1.2.1
·
1 row entry
·
1 columns
Uses the netgear variant from
Command help
/opt/observium/mibs/netgear.
Walk agentPethMainPseTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NG700-POWER-ETHERNET-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NG700-POWER-ETHERNET-MIB::agentPethMainPseTable'
A table of objects that display and control attributes of the main power source in a PSE device. Ethernet switches are one example of boxes that would support these objects. Values of all read-write objects in this table are persistent at restart/reboot.
A set of objects that display and control the Main
power of a PSE.
power of a PSE.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| agentPethMainPseLegacyEnable/Disable Legacy device detection. The value true(1) means legacy devices are detected; the value false(2) means legacy devices are not detected. | SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.4526.11.15.1.2.1.1.1 |
agentPethPseTable
table.1.3.6.1.4.1.4526.11.15.1.3
·
1 row entry
·
2 columns
Uses the netgear variant from
Command help
/opt/observium/mibs/netgear.
Walk agentPethPseTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NG700-POWER-ETHERNET-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NG700-POWER-ETHERNET-MIB::agentPethPseTable'
A table of per-unit information and configuration objects relating to the power configurtion for the entire pse unit.
A collection of objects providing additional power information
and control parameters for the specified pse unit.
and control parameters for the specified pse unit.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
| agentPethPsePowerManagementModeDescribes or controls the power management algorithm used by the pse to deliver power to the requesting PDsthat a pds. A value of dot3af(1) means that the port power limit is as per the dot3af class of the PD attached.… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.4526.11.15.1.3.1.1 | ||||||
| agentPethPseAutoResetEnabletrue (1) The PSE port is reset with out administrator intervention whenver a fault condition occurs. false(2) Administrator has to reset the pse port whenver a fault condition is detected. | SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.4526.11.15.1.3.1.2 |