NEWTEC-TSENCAPS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
23

ntcTsEncIsisTable

table
.1.3.6.1.4.1.5835.5.2.5800.1.1 · 1 row entry · 5 columns
Open in standard view
Uses the newtec variant from /opt/observium/mibs/newtec.
Command help
Walk ntcTsEncIsisTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NEWTEC-TSENCAPS-MIB' -M '/opt/observium/mibs/newtec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NEWTEC-TSENCAPS-MIB::ntcTsEncIsisTable' 
A table containing the ntcTsEncIsis
ntcTsEncIsisEntry row .1.3.6.1.4.1.5835.5.2.5800.1.1.1
A conceptual row of the ntcTsEncIsisTable.
Indexes
Column Syntax OID
ntcTsEncIsisName
The name of the Isi
OctetString
Constraints:
range: 1-100
 .1.3.6.1.4.1.5835.5.2.5800.1.1.1.1
ntcTsEncIsisRowStatus
The status of this conceptual row. An existing conceptual row can be in any
one of the three states, 'notReady', 'notInService', or 'active'. If the
manager wishes to add a row in a single shot with values for all the c…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.5835.5.2.5800.1.1.1.2
ntcTsEncIsisEnable
Enable or disable the corresponding encapsulator isi.
NEWTEC-TC-MIBNtcEnabler/w
Type Values:
0off
1on
 .1.3.6.1.4.1.5835.5.2.5800.1.1.1.3
ntcTsEncIsisIsi
The encapsulator ISI
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5835.5.2.5800.1.1.1.4
ntcTsEncIsisFrmTp
The type of frames for this encapsulator.
Enumerationr/w
Enumerated Values:
0short
1normal
 .1.3.6.1.4.1.5835.5.2.5800.1.1.1.5

ntcTsEncPidsTable

table
.1.3.6.1.4.1.5835.5.2.5800.1.2 · 1 row entry · 10 columns
Open in standard view
Uses the newtec variant from /opt/observium/mibs/newtec.
Command help
Walk ntcTsEncPidsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NEWTEC-TSENCAPS-MIB' -M '/opt/observium/mibs/newtec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NEWTEC-TSENCAPS-MIB::ntcTsEncPidsTable' 
A table containing the ntcTsEncPids
ntcTsEncPidsEntry row .1.3.6.1.4.1.5835.5.2.5800.1.2.1
A conceptual row of the ntcTsEncPidsTable.
Indexes
Column Syntax OID
ntcTsEncPidsName
The name of the Pid
OctetString
Constraints:
range: 1-100
 .1.3.6.1.4.1.5835.5.2.5800.1.2.1.1
ntcTsEncPidsRowStatus
The status of this conceptual row. An existing conceptual row can be in any
one of the three states, 'notReady', 'notInService', or 'active'. If the
manager wishes to add a row in a single shot with values for all the c…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.5835.5.2.5800.1.2.1.2
ntcTsEncPidsEnable
Enable or disable the corresponding encapsulator pid.
NEWTEC-TC-MIBNtcEnabler/w
Type Values:
0off
1on
 .1.3.6.1.4.1.5835.5.2.5800.1.2.1.3
ntcTsEncPidsPid
The encapsulator PID
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5835.5.2.5800.1.2.1.4
ntcTsEncPidsOutTypeName
The output type.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.5835.5.2.5800.1.2.1.5
ntcTsEncPidsOutInstanceName
The output instance name.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.5835.5.2.5800.1.2.1.6
ntcTsEncPidsProtocol
The transport stream encapsulation protocol.
Enumerationr/w
Enumerated Values:
0default
1mpe
2ule
 .1.3.6.1.4.1.5835.5.2.5800.1.2.1.7
ntcTsEncPidsNomS2Modcod
The initial MODCOD that this pid uses in S2 mode.
Enumerationr/w
Enumerated Values:
0unspecified
1qpsk14
2qpsk13
3qpsk25
4qpsk12
5qpsk35
6qpsk23
7qpsk34
8qpsk45
9qpsk56
10qpsk89
11qpsk910
12e8psk35
13e8psk23
14e8psk34
15e8psk56
16e8psk89
17e8psk910
18e16apsk23
19e16apsk34
20e16apsk45
21e16apsk56
22e16apsk89
23e16apsk910
24e32apsk34
25e32apsk45
26e32apsk56
27e32apsk89
28e32apsk910
29qpsk1345
30qpsk920
31qpsk1120
32e8apsk59l
33e8apsk2645l
34e8psk2336
35e8psk2536
36e8psk1318
37e16apsk12l
38e16apsk815l
39e16apsk59l
40e16apsk2645
41e16apsk35
42e16apsk35l
43e16apsk2845
44e16apsk2336
45e16apsk23l
46e16apsk2536
47e16apsk1318
48e16apsk79
49e16apsk7790
50e32apsk23l
51e32apsk3245
52e32apsk1115
53e32apsk79
54e64apsk3245l
55e64apsk1115
56e64apsk79
57e64apsk45
58e64apsk56
59e128apsk34
60e128apsk79
61e256apsk2945l
62e256apsk23l
63e256apsk3145l
64e256apsk3245
65e256apsk1115l
66e256apsk34
67qpsk1145
68qpsk415
69qpsk1445
70qpsk715
71qpsk815
72qpsk3245
73e8psk715
74e8psk815
75e8psk2645
76e8psk3245
77e16apsk715
78e16apsk815
79e16apsk3245
80e32apsk23
 .1.3.6.1.4.1.5835.5.2.5800.1.2.1.8
ntcTsEncPidsNomS2ExtModcod
The initial MODCOD that this channel uses in S2 Extensions mode.
Enumerationr/w
Enumerated Values:
0unspecified
129qpsk45180
130qpsk60180
131qpsk72180
132qpsk80180
133qpsk90180
134qpsk100180
135qpsk108180
136qpsk114180
137qpsk120180
138qpsk126180
139qpsk135180
140qpsk144180
141qpsk150180
142qpsk160180
143qpsk162180
144e8psk80180
145e8psk90180
146e8psk100180
147e8psk108180
148e8psk114180
149e8psk120180
150e8psk126180
151e8psk135180
152e8psk144180
153e8psk150180
154e16apsk80180
155e16apsk90180
156e16apsk100180
157e16apsk108180
158e16apsk114180
159e16apsk120180
160e16apsk126180
161e16apsk135180
162e16apsk144180
163e16apsk150180
164e16apsk160180
165e16apsk162180
166e32apsk100180
167e32apsk108180
168e32apsk114180
169e32apsk120180
170e32apsk126180
171e32apsk135180
172e32apsk144180
173e32apsk150180
174e32apsk160180
175e32apsk162180
176e64apsk90180
177e64apsk100180
178e64apsk108180
179e64apsk114180
180e64apsk120180
181e64apsk126180
182e64apsk135180
183e64apsk144180
184e64apsk150180
185e64apsk160180
186e64apsk162180
187e8pskl80180
188e8pskl90180
189e8pskl100180
190e8pskl108180
191e8pskl114180
192e8pskl120180
193e16apskl80180
194e16apskl90180
195e16apskl100180
196e16apskl108180
197e16apskl114180
198e16apskl120180
199e16apskl126180
200e16apskl135180
201e16apskl144180
202e16apskl150180
203e16apskl160180
204e16apskl162180
205e64apskl90180
206e64apskl100180
207e64apskl108180
208e64apskl114180
209e64apskl120180
210e64apskl126180
211e64apskl135180
212e64apskl144180
213e64apskl150180
214e64apskl160180
215e64apskl162180
 .1.3.6.1.4.1.5835.5.2.5800.1.2.1.9
ntcTsEncPidsAcmEnable
Enable or disable the ACM for this pid. This only takes effect when the
encapsulator ACM is on.
NEWTEC-TC-MIBNtcEnabler/w
Type Values:
0off
1on
 .1.3.6.1.4.1.5835.5.2.5800.1.2.1.10

ntcTsEncChannelsTable

table
.1.3.6.1.4.1.5835.5.2.5800.1.3 · 1 row entry · 8 columns
Open in standard view
Uses the newtec variant from /opt/observium/mibs/newtec.
Command help
Walk ntcTsEncChannelsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NEWTEC-TSENCAPS-MIB' -M '/opt/observium/mibs/newtec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NEWTEC-TSENCAPS-MIB::ntcTsEncChannelsTable' 
A table containing the ntcTsEncChannels
ntcTsEncChannelsEntry row .1.3.6.1.4.1.5835.5.2.5800.1.3.1
A conceptual row of the ntcTsEncChannelsTable.
Indexes
Column Syntax OID
ntcTsEncChannelsName
The name of the channel
OctetString
Constraints:
range: 1-100
 .1.3.6.1.4.1.5835.5.2.5800.1.3.1.1
ntcTsEncChannelsRowStatus
The status of this conceptual row. An existing conceptual row can be in any
one of the three states, 'notReady', 'notInService', or 'active'. If the
manager wishes to add a row in a single shot with values for all the c…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.5835.5.2.5800.1.3.1.2
ntcTsEncChannelsEnable
Enable or disable the corresponding destination channel.
NEWTEC-TC-MIBNtcEnabler/w
Type Values:
0off
1on
 .1.3.6.1.4.1.5835.5.2.5800.1.3.1.3
ntcTsEncChannelsOutTypeName
The output type.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.5835.5.2.5800.1.3.1.4
ntcTsEncChannelsOutInstanceName
The output instance name.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.5835.5.2.5800.1.3.1.5
ntcTsEncChannelsLabel
Label of the destination channel or the special identifier 'multicast'.
OctetStringr/w
Constraints:
range: 0-30
 .1.3.6.1.4.1.5835.5.2.5800.1.3.1.6
ntcTsEncChannelsTermName
The name of the terminal to which this channel is configured
OctetStringr/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.5835.5.2.5800.1.3.1.7
ntcTsEncChannelsAccessVlan
If a non-zero Access VLAN is associated to an encapsulation channel, traffic
from this VLAN is transmitted untagged to the channel.
Unsigned32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.5835.5.2.5800.1.3.1.8