NEWTEC-TSANALYSER-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
21

ntcTsAnlyPidTable

table
.1.3.6.1.4.1.5835.5.2.1400.1.4 · 1 row entry · 6 columns
Open in standard view
Uses the newtec variant from /opt/observium/mibs/newtec.
Command help
Walk ntcTsAnlyPidTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NEWTEC-TSANALYSER-MIB' -M '/opt/observium/mibs/newtec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NEWTEC-TSANALYSER-MIB::ntcTsAnlyPidTable' 
A table containing all detected PID's of the incoming traffic stream with
corresponding measurements.
ntcTsAnlyPidEntry row .1.3.6.1.4.1.5835.5.2.1400.1.4.1
A conceptual row of the ntcTsAnlyPidTable.
Indexes
Column Syntax OID
ntcTsAnlyPidPid
PID
Unsigned32
Constraints:
range: 0-8190
 .1.3.6.1.4.1.5835.5.2.1400.1.4.1.1
ntcTsAnlyPidType
PID Type
Enumeration
Enumerated Values:
0others
1video
2audio
3privateSection
4pesPrivate
5mheg
6dsmCc
7h2221
8mpe
9auxiliary
10slOrFlexMux
11sdp
12metadata
13ipmp
14userPrivate
15pat
16cat
17tsdt
18nitOrSt
19sdtOrBatOrSt
20eitOrStCit
21rstOrSt
22tdtOrTotOrSt
23netwSync
24rnt
25inband
26measurement
27dit
28sit
29null
30othersOrGhost
31pmt
32visual
33srm
34ecm
35emm
 .1.3.6.1.4.1.5835.5.2.1400.1.4.1.2
ntcTsAnlyPidPIDRate
PID Rate for a specific stream.
bpsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5835.5.2.1400.1.4.1.3
ntcTsAnlyPidContinuityError
Continuity Count Error
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.5835.5.2.1400.1.4.1.4
ntcTsAnlyPidTransportError
Transport Error
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.5835.5.2.1400.1.4.1.5
ntcTsAnlyPidCtuCntErrorCntr
Indicates the number of packets with a continuity count error.
packetsSNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5835.5.2.1400.1.4.1.6

ntcTsAnlyPcrPidTable

table
.1.3.6.1.4.1.5835.5.2.1400.1.5 · 1 row entry · 10 columns
Open in standard view
Uses the newtec variant from /opt/observium/mibs/newtec.
Command help
Walk ntcTsAnlyPcrPidTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NEWTEC-TSANALYSER-MIB' -M '/opt/observium/mibs/newtec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NEWTEC-TSANALYSER-MIB::ntcTsAnlyPcrPidTable' 
A table of PCR PID's with detailled time measurements.
ntcTsAnlyPcrPidEntry row .1.3.6.1.4.1.5835.5.2.1400.1.5.1
A conceptual row of the ntcTsAnlyPcrPidTable.
Indexes
Column Syntax OID
ntcTsAnlyPcrPidPid
PID
Unsigned32
Constraints:
range: 0-8190
 .1.3.6.1.4.1.5835.5.2.1400.1.5.1.1
ntcTsAnlyPcrPidPcrIntervalTime
Measured interval time (in milliseconds) between 2 PCR packets.
msUnsigned32
Constraints:
range: 0-9999999
 .1.3.6.1.4.1.5835.5.2.1400.1.5.1.2
ntcTsAnlyPcrPidPcrRepeatError
PCR Repetition Error is raised when the spacing between two consecutive PCR
values is more than 40ms. The condition can occur when PCR packets get lost or
when PCR packets are not present at a sufficient rate.
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.5835.5.2.1400.1.5.1.3
ntcTsAnlyPcrPidPcrAccuracyError
The PCR Accuracy error is raised when the PCR accuracy exceeds +/- 500nsec.
The definition of the alarm is taken from TR101290.
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.5835.5.2.1400.1.5.1.4
ntcTsAnlyPcrPidMinJitter
Minimum value of PCR_AC (nanoseconds) over the last second.
nsInteger32
Constraints:
range: -9999999-9999999
 .1.3.6.1.4.1.5835.5.2.1400.1.5.1.5
ntcTsAnlyPcrPidMaxJitter
Max Jitter PCR_AC (nanoseconds) measured over the last second.
nsInteger32
Constraints:
range: -9999999-9999999
 .1.3.6.1.4.1.5835.5.2.1400.1.5.1.6
ntcTsAnlyPcrPidMinHoldJitter
The minimum measured PCR_AC value (in nanoseconds) computed since the last
reset.
nsInteger32
Constraints:
range: -9999999-9999999
 .1.3.6.1.4.1.5835.5.2.1400.1.5.1.7
ntcTsAnlyPcrPidMaxHoldJitter
The maximum measured PCR_AC value (in nanoseconds) computed since the last
reset.
nsInteger32
Constraints:
range: -9999999-9999999
 .1.3.6.1.4.1.5835.5.2.1400.1.5.1.8
ntcTsAnlyPcrPidRateOffset
Rate Offset in PPM of the inband clock companed to the local clock. (ASI:
local clock, TS over IP: configured bitrate)
ppmSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5835.5.2.1400.1.5.1.9
ntcTsAnlyPcrPidPcrRate
PCR Rate (Mb/s) calculated by using the inband PCR timing information.
bpsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5835.5.2.1400.1.5.1.10

ntcTsAnlyEPidTable

table
.1.3.6.1.4.1.5835.5.2.1400.1.7 · 1 row entry · 5 columns
Open in standard view
Uses the newtec variant from /opt/observium/mibs/newtec.
Command help
Walk ntcTsAnlyEPidTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NEWTEC-TSANALYSER-MIB' -M '/opt/observium/mibs/newtec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NEWTEC-TSANALYSER-MIB::ntcTsAnlyEPidTable' 
Table which contains PIDs on which an error has been detected.
ntcTsAnlyEPidEntry row .1.3.6.1.4.1.5835.5.2.1400.1.7.1
A conceptual row of the ntcTsAnlyEPidTable.
Indexes
Column Syntax OID
ntcTsAnlyEPidPid
PID
Unsigned32
Constraints:
range: 0-8190
 .1.3.6.1.4.1.5835.5.2.1400.1.7.1.1
ntcTsAnlyEPidType
PID Type
Enumeration
Enumerated Values:
0others
1video
2audio
3privateSection
4pesPrivate
5mheg
6dsmCc
7h2221
8mpe
9auxiliary
10slOrFlexMux
11sdp
12metadata
13ipmp
14userPrivate
15pat
16cat
17tsdt
18nitOrSt
19sdtOrBatOrSt
20eitOrStCit
21rstOrSt
22tdtOrTotOrSt
23netwSync
24rnt
25inband
26measurement
27dit
28sit
29null
30othersOrGhost
31pmt
32visual
33srm
34ecm
35emm
 .1.3.6.1.4.1.5835.5.2.1400.1.7.1.2
ntcTsAnlyEPidCtuCntErrorCntr
Indicates the number of packets with a continuity count error.
packetsSNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5835.5.2.1400.1.7.1.3
ntcTsAnlyEPidContinuityError
Continuity Count Error
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.5835.5.2.1400.1.7.1.4
ntcTsAnlyEPidTransportError
Transport Error
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.5835.5.2.1400.1.7.1.5