NEWTEC-ETHERNET-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
34

ntcEtherLinkMgmtTable

table
.1.3.6.1.4.1.5835.5.2.500.1.1 · 1 row entry · 8 columns
Open in standard view
Uses the newtec variant from /opt/observium/mibs/newtec.
Command help
Walk ntcEtherLinkMgmtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NEWTEC-ETHERNET-MIB' -M '/opt/observium/mibs/newtec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NEWTEC-ETHERNET-MIB::ntcEtherLinkMgmtTable' 
A table containing the ntcEtherLinkMgmt
ntcEtherLinkMgmtEntry row .1.3.6.1.4.1.5835.5.2.500.1.1.1
A conceptual row of the ntcEtherLinkMgmtTable.
Indexes
Column Syntax OID
ntcEtherLinkMgmtInterface
The name of Management Ethernet interface
Enumeration
Enumerated Values:
0mgmt1
1mgmt2
2mgmtfp
 .1.3.6.1.4.1.5835.5.2.500.1.1.1.1
ntcEtherLinkMgmtEnable
Enable or disable the corresponding Ethernet interface.
NEWTEC-TC-MIBNtcEnabler/w
Type Values:
0off
1on
 .1.3.6.1.4.1.5835.5.2.500.1.1.1.2
ntcEtherLinkMgmtMacAddress
MAC address of an Ethernet interface.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.5835.5.2.500.1.1.1.3
ntcEtherLinkMgmtAutoNegotiation
Enable or disable autonegotiation. AutoNegotiation is a procedure where two
connected devices choose the same Ethernet transmission parameters (Speed,
duplex/simplex mode and flow control).
NEWTEC-TC-MIBNtcEnabler/w
Type Values:
0off
1on
 .1.3.6.1.4.1.5835.5.2.500.1.1.1.4
ntcEtherLinkMgmtAdvertisedSpeeds
Configure the advertised speeds during autonegotiation.
Enumerationr/w
Enumerated Values:
0all
1e10BTHalfDuplex
2e10BTFullDuplex
3e100BTHalfDuplex
4e100BTFullDuplex
5e1000BTFullDuplex
 .1.3.6.1.4.1.5835.5.2.500.1.1.1.5
ntcEtherLinkMgmtForcedSpeed
Configure forced speed with disabled autonegotation.
Enumerationr/w
Enumerated Values:
1e10BTHalfDuplex
2e10BTFullDuplex
3e100BTHalfDuplex
4e100BTFullDuplex
 .1.3.6.1.4.1.5835.5.2.500.1.1.1.6
ntcEtherLinkMgmtLinkState
Indicates the link state of the Ethernet interface.
Enumeration
Enumerated Values:
0linkDown
1e10BTHalfDuplex
2e10BTFullDuplex
3e100BTHalfDuplex
4e100BTFullDuplex
5e1000BTFullDuplex
6e10GSFPplus
 .1.3.6.1.4.1.5835.5.2.500.1.1.1.7
ntcEtherLinkMgmtMtu
Configuration of the MTU of the interface.
Unsigned32r/w
Constraints:
range: 68-9216
 .1.3.6.1.4.1.5835.5.2.500.1.1.1.8

ntcEtherLinkDataTable

table
.1.3.6.1.4.1.5835.5.2.500.1.2 · 1 row entry · 8 columns
Open in standard view
Uses the newtec variant from /opt/observium/mibs/newtec.
Command help
Walk ntcEtherLinkDataTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NEWTEC-ETHERNET-MIB' -M '/opt/observium/mibs/newtec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NEWTEC-ETHERNET-MIB::ntcEtherLinkDataTable' 
A table containing the ntcEtherLinkData
ntcEtherLinkDataEntry row .1.3.6.1.4.1.5835.5.2.500.1.2.1
A conceptual row of the ntcEtherLinkDataTable.
Indexes
Column Syntax OID
ntcEtherLinkDataInterface
The name of a Data Ethernet Interface
Enumeration
Enumerated Values:
0data1
1data2
2sat1
3sat2
 .1.3.6.1.4.1.5835.5.2.500.1.2.1.1
ntcEtherLinkDataEnable
Enable or disable the corresponding Ethernet interface.
NEWTEC-TC-MIBNtcEnabler/w
Type Values:
0off
1on
 .1.3.6.1.4.1.5835.5.2.500.1.2.1.2
ntcEtherLinkDataMacAddress
MAC address of an Ethernet interface.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.5835.5.2.500.1.2.1.3
ntcEtherLinkDataAutoNegotiation
Enable or disable autonegotiation. AutoNegotiation is a procedure where two
connected devices choose the same Ethernet transmission parameters (Speed,
duplex/simplex mode and flow control).
NEWTEC-TC-MIBNtcEnabler/w
Type Values:
0off
1on
 .1.3.6.1.4.1.5835.5.2.500.1.2.1.4
ntcEtherLinkDataAdvertisedSpeeds
Configure the advertised speeds during autonegotiation.
Enumerationr/w
Enumerated Values:
0all
1e10BTHalfDuplex
2e10BTFullDuplex
3e100BTHalfDuplex
4e100BTFullDuplex
5e1000BTFullDuplex
 .1.3.6.1.4.1.5835.5.2.500.1.2.1.5
ntcEtherLinkDataForcedSpeed
Configure forced speed with disabled autonegotation.
Enumerationr/w
Enumerated Values:
1e10BTHalfDuplex
2e10BTFullDuplex
3e100BTHalfDuplex
4e100BTFullDuplex
 .1.3.6.1.4.1.5835.5.2.500.1.2.1.6
ntcEtherLinkDataLinkState
Indicates the link state of the Ethernet interface.
Enumeration
Enumerated Values:
0linkDown
1e10BTHalfDuplex
2e10BTFullDuplex
3e100BTHalfDuplex
4e100BTFullDuplex
5e1000BTFullDuplex
6e10GSFPplus
 .1.3.6.1.4.1.5835.5.2.500.1.2.1.7
ntcEtherLinkDataMtu
Configuration of the MTU of the interface.
Unsigned32r/w
Constraints:
range: 68-9216
 .1.3.6.1.4.1.5835.5.2.500.1.2.1.8

ntcEtherStatMgmtTable

table
.1.3.6.1.4.1.5835.5.2.500.1.3 · 1 row entry · 9 columns
Open in standard view
Uses the newtec variant from /opt/observium/mibs/newtec.
Command help
Walk ntcEtherStatMgmtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NEWTEC-ETHERNET-MIB' -M '/opt/observium/mibs/newtec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NEWTEC-ETHERNET-MIB::ntcEtherStatMgmtTable' 
A table containing the ntcEtherStatMgmt
ntcEtherStatMgmtEntry row .1.3.6.1.4.1.5835.5.2.500.1.3.1
A conceptual row of the ntcEtherStatMgmtTable.
Indexes
Column Syntax OID
ntcEtherStatMgmtInterface
The name of a Management Ethernet Interface
Enumeration
Enumerated Values:
0mgmt1
1mgmt2
2mgmtfp
3mgmtbond
 .1.3.6.1.4.1.5835.5.2.500.1.3.1.1
ntcEtherStatMgmtInputBytes
Ethernet input byte counter.
bytesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5835.5.2.500.1.3.1.2
ntcEtherStatMgmtInputPackets
Ethernet input packet counter.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5835.5.2.500.1.3.1.3
ntcEtherStatMgmtInputDropped
Indicates the number of dropped packets at input.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5835.5.2.500.1.3.1.4
ntcEtherStatMgmtOutputBytes
Indicates the number of available bytes on the output.
bytesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5835.5.2.500.1.3.1.5
ntcEtherStatMgmtOutputPackets
Ethernet output packet counter
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5835.5.2.500.1.3.1.6
ntcEtherStatMgmtOutputDropped
Ethernet output packets dropped counter
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5835.5.2.500.1.3.1.7
ntcEtherStatMgmtInputErrors
Indicates the number of error packets at input.
packetsSNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5835.5.2.500.1.3.1.8
ntcEtherStatMgmtOutputerrors
Indicates the number of error packets at output.
packetsSNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5835.5.2.500.1.3.1.9

ntcEtherStatDataTable

table
.1.3.6.1.4.1.5835.5.2.500.1.4 · 1 row entry · 9 columns
Open in standard view
Uses the newtec variant from /opt/observium/mibs/newtec.
Command help
Walk ntcEtherStatDataTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NEWTEC-ETHERNET-MIB' -M '/opt/observium/mibs/newtec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NEWTEC-ETHERNET-MIB::ntcEtherStatDataTable' 
A table containing the ntcEtherStatData
ntcEtherStatDataEntry row .1.3.6.1.4.1.5835.5.2.500.1.4.1
A conceptual row of the ntcEtherStatDataTable.
Indexes
Column Syntax OID
ntcEtherStatDataInterface
The name of a Data Ethernet interface
Enumeration
Enumerated Values:
0data1
1data2
2databond
3sat1
4sat2
5satbond
 .1.3.6.1.4.1.5835.5.2.500.1.4.1.1
ntcEtherStatDataInputBytes
Ethernet input byte counter.
bytesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5835.5.2.500.1.4.1.2
ntcEtherStatDataInputPackets
Ethernet input packet counter.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5835.5.2.500.1.4.1.3
ntcEtherStatDataInputDropped
Indicates the number of dropped packets at input.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5835.5.2.500.1.4.1.4
ntcEtherStatDataOutputBytes
Indicates the number of available bytes on the output.
bytesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5835.5.2.500.1.4.1.5
ntcEtherStatDataOutputPackets
Ethernet output packet counter
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5835.5.2.500.1.4.1.6
ntcEtherStatDataOutputDropped
Ethernet output packets dropped counter
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5835.5.2.500.1.4.1.7
ntcEtherStatDataInputErrors
Indicates the number of error packets at input.
packetsSNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5835.5.2.500.1.4.1.8
ntcEtherStatDataOutputerrors
Indicates the number of error packets at output.
packetsSNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5835.5.2.500.1.4.1.9