NEWTEC-BBFOVERIPIN-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
26

ntcConfigurationTableTable

table
.1.3.6.1.4.1.5835.5.2.1200.1.3 · 1 row entry · 8 columns
Open in standard view
Uses the newtec variant from /opt/observium/mibs/newtec.
Command help
Walk ntcConfigurationTableTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NEWTEC-BBFOVERIPIN-MIB' -M '/opt/observium/mibs/newtec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NEWTEC-BBFOVERIPIN-MIB::ntcConfigurationTableTable' 
Configuration table
ntcConfigurationTableEntry row .1.3.6.1.4.1.5835.5.2.1200.1.3.1
A conceptual row of the ntcConfigurationTableTable.
Indexes
Column Syntax OID
ntcConfigurationTableName
Name of the configuration
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.5835.5.2.1200.1.3.1.1
ntcConfigurationTableRowStatus
The status of this conceptual row. An existing conceptual row can be in any
one of the three states, 'notReady', 'notInService', or 'active'. If the
manager wishes to add a row in a single shot with values for all the c…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.5835.5.2.1200.1.3.1.2
ntcBbfOIpInEpEnable
Enable or disable a BBF endpoint.
NEWTEC-TC-MIBNtcEnabler/w
Type Values:
0off
1on
 .1.3.6.1.4.1.5835.5.2.1200.1.3.1.3
ntcBbfOIpInIpEpAddressType
Configuration of the IP address type for BBF over IP reception. (unicast or
multicast)
Enumerationr/w
Enumerated Values:
0unicast
1multicast
 .1.3.6.1.4.1.5835.5.2.1200.1.3.1.4
ntcBbfOIpInEpMulticastAddress
Multicast IP address used to receive the BBF over IP data. Regular expression
: (?-mix:^\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}$)
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.5835.5.2.1200.1.3.1.5
ntcBbfOIpInEpIpUdpPort
Configuration of the UDP port on which the BBF over IP is received
Unsigned32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.5835.5.2.1200.1.3.1.6
ntcBbfOIpInEpBbfType
Type of baseband frames which are received in the BBF over IP functionality.
Enumerationr/w
Enumerated Values:
0dvbbbf
1ntcbbf
 .1.3.6.1.4.1.5835.5.2.1200.1.3.1.7
ntcBbfOIpInEpSourceRedundancy
Enable or disable source redundancy.
NEWTEC-TC-MIBNtcEnabler/w
Type Values:
0off
1on
 .1.3.6.1.4.1.5835.5.2.1200.1.3.1.8

ntcMonitoringTableTable

table
.1.3.6.1.4.1.5835.5.2.1200.1.4.11 · 1 row entry · 13 columns
Open in standard view
Uses the newtec variant from /opt/observium/mibs/newtec.
Command help
Walk ntcMonitoringTableTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NEWTEC-BBFOVERIPIN-MIB' -M '/opt/observium/mibs/newtec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NEWTEC-BBFOVERIPIN-MIB::ntcMonitoringTableTable' 
Monitoring table
ntcMonitoringTableEntry row .1.3.6.1.4.1.5835.5.2.1200.1.4.11.1
A conceptual row of the ntcMonitoringTableTable.
Indexes
Column Syntax OID
ntcMonitoringTableName
Name of the output monitor
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.5835.5.2.1200.1.4.11.1.1
ntcBbfOIpInMonBbfInputBitRate
BBF over IP input bit rate in bps.
bpsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5835.5.2.1200.1.4.11.1.2
ntcBbfOIpInMonSourceAddress
Source sending the traffic
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.5835.5.2.1200.1.4.11.1.3
ntcBbfOIpInMonBbfInCount
Number of received BBFs.
framesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5835.5.2.1200.1.4.11.1.4
ntcBbfOIpInMonBbfOutCount
Number of transmitted BBFs.
framesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5835.5.2.1200.1.4.11.1.5
ntcBbfOIpInMonBbfByteOutCount
This parameter counts the number of Baseband Frame bytes properly transmitted
in a stream.
bytesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5835.5.2.1200.1.4.11.1.6
ntcBbfOIpInMonBbfDropCount
Number of dropped BBFs.
framesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5835.5.2.1200.1.4.11.1.7
ntcBbfOIpInMonBbfOverflowCount
Number of BBFs that are dropped for a specific BBF stream because the input
data buffer is full.
framesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5835.5.2.1200.1.4.11.1.8
ntcBbfOIpInMonBbfInvFrameCount
Number of BBFs that are dropped because the received modulation type is not
active on the device.
framesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5835.5.2.1200.1.4.11.1.9
ntcBbfOIpInMonBbfDiscontCount
When the sequence numbers are not continuous for a certain BBF stream this
counter will be incremented.
framesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5835.5.2.1200.1.4.11.1.10
ntcBbfOIpInMonBbfModNS
Number of BBFs which are dropped because the received modcod is not licensed
for a specified BBF stream.
framesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5835.5.2.1200.1.4.11.1.11
ntcBbfOIpInMonBbfByteCorCount
This parameter counts the number of corrupted Baseband Frame bytes that are
dropped for a certain BBF stream.
bytesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5835.5.2.1200.1.4.11.1.12
ntcBbfOIpInMonBbfInvSignCount
This parameter counts the number of invalid Tellitec Signalling Frames that
are dropped for a certain BBF stream.
framesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5835.5.2.1200.1.4.11.1.13

ntcAlarmStatusTableTable

table
.1.3.6.1.4.1.5835.5.2.1200.1.4.12 · 1 row entry · 5 columns
Open in standard view
Uses the newtec variant from /opt/observium/mibs/newtec.
Command help
Walk ntcAlarmStatusTableTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NEWTEC-BBFOVERIPIN-MIB' -M '/opt/observium/mibs/newtec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NEWTEC-BBFOVERIPIN-MIB::ntcAlarmStatusTableTable' 
Alarm status table
ntcAlarmStatusTableEntry row .1.3.6.1.4.1.5835.5.2.1200.1.4.12.1
A conceptual row of the ntcAlarmStatusTableTable.
Indexes
Column Syntax OID
ntcStreamInx
Name of the alarm monitor
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.5835.5.2.1200.1.4.12.1.1
ntcBbfOIpInMonBbfNoInpDataError
This alarm is raised when no input data is received between a 1 second time
interval for 1 or more BBF streams. This variable indicates the current status
of the alarm.
NEWTEC-TC-MIBNtcAlarmState
Type Values:
0off
1on
 .1.3.6.1.4.1.5835.5.2.1200.1.4.12.1.2
ntcBbfOverflowError
This alarm is raised when the input data buffer for 1 or more BBF streams is
full. This variable indicates the current status of the alarm.
NEWTEC-TC-MIBNtcAlarmState
Type Values:
0off
1on
 .1.3.6.1.4.1.5835.5.2.1200.1.4.12.1.3
ntcBbfDiscontinuityError
The alarm is raised when the sequence numbers are not continuous for a
specific ntS2BBF input stream for 5 sec. This variable indicates the current
status of the alarm.
NEWTEC-TC-MIBNtcAlarmState
Type Values:
0off
1on
 .1.3.6.1.4.1.5835.5.2.1200.1.4.12.1.4
ntcBbfModcodNotSupportedError
This alarm is raised when Baseband frames are dropped due to receiving a non
licensed modcod. This variable indicates the current status of the alarm.
NEWTEC-TC-MIBNtcAlarmState
Type Values:
0off
1on
 .1.3.6.1.4.1.5835.5.2.1200.1.4.12.1.5