NETI-DTM-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
6
Rows
6
Columns
54
dtmAddrTable
table.1.3.6.1.4.1.2928.6.2.4.1.1.1
·
1 row entry
·
5 columns
Uses the netinsight variant from
Command help
/opt/observium/mibs/netinsight.
Walk dtmAddrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETI-DTM-MIB' -M '/opt/observium/mibs/netinsight:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETI-DTM-MIB::dtmAddrTable'
The table of addressing information relevant to this entity's DTM addresses.
The addressing information for one of this
entity's DTM addresses.
entity's DTM addresses.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| dtmAddrEntryIndexAn arbitrary index in the link table. | Unsigned32 Constraints: range: 1-65535 | .1.3.6.1.4.1.2928.6.2.4.1.1.1.1.1 | ||||||||||||
| dtmAddrEntryAddrThe DTM address to which this entry's addressing information pertains. | DtmAddressr/w Type Constraints: range: 8 | .1.3.6.1.4.1.2928.6.2.4.1.1.1.1.2 | ||||||||||||
| dtmAddrEntryIsAliasIndicates if this address is the network address for this entity. There is only one network address for each entity. Values: true(1) This address is an alias. false(2) This address is the '… | SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.2928.6.2.4.1.1.1.1.3 | ||||||||||||
| dtmAddrEntryAddrTypeIndicates the type of address. This type is derived from the prefixes defined below, so this is really just a more user-friendly manner of presenting the address type. unspecified(1) The unspecified addre… | Enumeration Enumerated Values:
| .1.3.6.1.4.1.2928.6.2.4.1.1.1.1.4 | ||||||||||||
| dtmAddrEntryRowStatusSee SNMPv2-TC. | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.2928.6.2.4.1.1.1.1.5 |
dtmHostsTable
table.1.3.6.1.4.1.2928.6.2.4.1.1.2
·
1 row entry
·
4 columns
Uses the netinsight variant from
Command help
/opt/observium/mibs/netinsight.
Walk dtmHostsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETI-DTM-MIB' -M '/opt/observium/mibs/netinsight:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETI-DTM-MIB::dtmHostsTable'
The table of addressing information relevant to this entity's DTM addresses.
The addressing information for one of this
entity's DTM addresses.
entity's DTM addresses.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| dtmHostsEntryIndexAn arbitrary index in the hosts database table. | Unsigned32 Constraints: range: 1-65535 | .1.3.6.1.4.1.2928.6.2.4.1.1.2.1.1 | ||||||||||||
| dtmHostsEntryAddrThe DTM address to which this hosts name is mapped. | DtmAddressr/w Type Constraints: range: 8 | .1.3.6.1.4.1.2928.6.2.4.1.1.2.1.2 | ||||||||||||
| dtmHostsEntryNameThe hosts name representing the DTM address. The host name is a text string up to 64 characters drawn from the alphabet (A-Z, a-z), digits (0-9), and minus sign (-). No blank or space characters are permitted as part of… | SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… | .1.3.6.1.4.1.2928.6.2.4.1.1.2.1.3 | ||||||||||||
| dtmHostsEntryRowStatusSee SNMPv2-TC. The following values are supported: createAndGo(4). A new conceptual row is created representing the mapping between DTM address and DTM host name. destroy(6)… | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.2928.6.2.4.1.1.2.1.4 |
dtmIfTable
table.1.3.6.1.4.1.2928.6.2.4.1.2.1
·
1 row entry
·
26 columns
Uses the netinsight variant from
Command help
/opt/observium/mibs/netinsight.
Walk dtmIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETI-DTM-MIB' -M '/opt/observium/mibs/netinsight:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETI-DTM-MIB::dtmIfTable'
A conceptual table containing with DTM interfaces.
An entry in the DTM interface table.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| dtmIfIndexIndex in to the table. | Integer32 Constraints: range: 1-2147483647 | .1.3.6.1.4.1.2928.6.2.4.1.2.1.1.1 | ||||||||||||
| dtmIfNameThe interface name, on the form <type><card position>:<port>, for example 'dtm4:1'. Should correlate to what it says on the front of the actual hardware. | SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… | .1.3.6.1.4.1.2928.6.2.4.1.2.1.1.2 | ||||||||||||
| dtmIfMacAddressThe interfaces DTM physical address, i.e. a MAC identity. | SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… | .1.3.6.1.4.1.2928.6.2.4.1.2.1.1.3 | ||||||||||||
| dtmIfTxCapacityThe upper transmit capability (in slots) for this interface. Set to 0 if not known. | SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.2928.6.2.4.1.2.1.1.4 | ||||||||||||
| dtmIfTxCapacityCtrlThe transmit capability (in slots) used for control traffic (when dedicated control channels are used). See also dtmIfreducedCtrlCapacity. | SNMPv2-SMIGauge32r/w Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.2928.6.2.4.1.2.1.1.5 | ||||||||||||
dtmIfTxCapacityStartdeprecated The start slot for owned transmit capability (in slots) forthis interface. Valid range is between 1 and the upper transmit capacity of the interface - 1. | SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.2928.6.2.4.1.2.1.1.6 | ||||||||||||
dtmIfTxCapacityOwneddeprecated The owned transmit capability (in slots) for thisinterface. Total capacity for use is Owned + Borrowed - Lent. Set to 0 if not known. | SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.2928.6.2.4.1.2.1.1.7 | ||||||||||||
dtmIfTxCapacityBorroweddeprecated The borrowed transmit capability (in slots) for thisinterface. Set to 0 if not known. | SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.2928.6.2.4.1.2.1.1.8 | ||||||||||||
dtmIfTxCapacityMaxLenddeprecated The maximum amount of transmit capability (in slots) thatthis interface will lend to other interfaces. Set to 0 if not known. | SNMPv2-SMIGauge32r/w Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.2928.6.2.4.1.2.1.1.9 | ||||||||||||
dtmIfTxCapacityLentdeprecated The lent transmit capability (in slots) for this interface.Set to 0 if not known. | SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.2928.6.2.4.1.2.1.1.10 | ||||||||||||
| dtmIfTxCapacityUsedThe transmit capability (in slots) used for data traffic for this interface. | SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.2928.6.2.4.1.2.1.1.11 | ||||||||||||
| dtmIfRxCapacityThe upper receive capability (in slots) for this interface. Set to 0 if not known. | SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.2928.6.2.4.1.2.1.1.12 | ||||||||||||
| dtmIfRxCapacityUsedThe receive capability (in slots) used for data traffic for this interface. | SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.2928.6.2.4.1.2.1.1.13 | ||||||||||||
dtmIfIfIndexdeprecated Index in to the MIB-II ifTable. Set to 0 if not known. | Integer32 Constraints: range: 0-2147483647 | .1.3.6.1.4.1.2928.6.2.4.1.2.1.1.14 | ||||||||||||
| dtmIfAdminStatusThe desired state of the interface. The administrative status controls whether the interface should be active or not. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.2928.6.2.4.1.2.1.1.15 | ||||||||||||
| dtmIfOperStatusThe actual state of the interface. The value should follow the state of the Administrative Status (dtmIfAdminStatus) unless something fails, or be `absent' if the interface is absent. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.2928.6.2.4.1.2.1.1.16 | ||||||||||||
| dtmIfRowStatusSee SNMPv2-TC. | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.2928.6.2.4.1.2.1.1.17 | ||||||||||||
dtmIfAbsentdeprecated Indicates that a configured interface can not be activatedbecause there are no hardware resources. This happens if the dtmIfAdminStatus is set to `up', and the interface is absent. | NETI-COMMON-MIBFaultStatus Type Values:
| .1.3.6.1.4.1.2928.6.2.4.1.2.1.1.18 | ||||||||||||
| dtmIfLOSIndicates Loss Of Signal from the DTM domain. | NETI-COMMON-MIBFaultStatus Type Values:
| .1.3.6.1.4.1.2928.6.2.4.1.2.1.1.19 | ||||||||||||
| dtmIfReducedCtrlCapacityIndicates that the node has not been able to allocate dedicated capacity for control traffic. | NETI-COMMON-MIBFaultStatus Type Values:
| .1.3.6.1.4.1.2928.6.2.4.1.2.1.1.20 | ||||||||||||
dtmIfTxCapacityOwnedFirstSlotdeprecated The lower end of the transmit capability range (in slots) forthis interface. | SNMPv2-SMIGauge32r/w Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.2928.6.2.4.1.2.1.1.21 | ||||||||||||
| dtmIfTxCapacityOwnedLastSlotThe upper end of the transmit capability range (in slots) for this interface. | SNMPv2-SMIGauge32r/w Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.2928.6.2.4.1.2.1.1.22 | ||||||||||||
| dtmIfRouteMetricThe route metric used by the DTM Routing Protocol (DRP) when calculating cost for routing through this interface. The value zero (0) indicates that the DRP protocol shall be disabled for this interface and no routing in… | SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.2928.6.2.4.1.2.1.1.23 | ||||||||||||
| dtmIfLinkClassThe link class controls the behavior of a link when a failure is detected on the link or on the node connected to the remote end of the link. The link class decides which values the dtmLinkStateNodeStatus object can tak… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.2928.6.2.4.1.2.1.1.24 | ||||||||||||
| dtmIfPurposeA string describing the purpose of the interface. The string is for administrative use. | SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255 | .1.3.6.1.4.1.2928.6.2.4.1.2.1.1.25 | ||||||||||||
| dtmIfSyncEnabledControls if the trunk interface on which this interface is stacked on top, can be considered a source for synchronization. disabled(1) The interface shall not be considered. enabled(2). The… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.2928.6.2.4.1.2.1.1.26 |
dtmLinkStateTable
table.1.3.6.1.4.1.2928.6.2.4.1.3.3
·
1 row entry
·
3 columns
Uses the netinsight variant from
Command help
/opt/observium/mibs/netinsight.
Walk dtmLinkStateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETI-DTM-MIB' -M '/opt/observium/mibs/netinsight:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETI-DTM-MIB::dtmLinkStateTable'
The link information table.
One entry per discovered link.
Indexes
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
| dtmLinkStateIndexAn arbitrary index in the link table. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.2928.6.2.4.1.3.3.1.1 | ||||||
| dtmLinkStateTypeThe 'simple' topological type of the link: unknown(1) Type cannot be determined. looped(2) Looped topology; i.e. a ring. open(3) Open topology; i.e. part of a bus. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.2928.6.2.4.1.3.3.1.2 | ||||||
| dtmLinkStateLocalIfThe name of the local interface that belongs to the link. | SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… | .1.3.6.1.4.1.2928.6.2.4.1.3.3.1.3 |
dtmLinkStateIfTable
table.1.3.6.1.4.1.2928.6.2.4.1.3.5
·
1 row entry
·
6 columns
Uses the netinsight variant from
Command help
/opt/observium/mibs/netinsight.
Walk dtmLinkStateIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETI-DTM-MIB' -M '/opt/observium/mibs/netinsight:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETI-DTM-MIB::dtmLinkStateIfTable'
The link interface information table.
One entry for every interface on each link. On each link the
interfaces are ordered in downstream order.
interfaces are ordered in downstream order.
Indexes
| Column | Syntax | OID | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| dtmLinkStateIfIndexAn arbitrary index in the link interface table. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.2928.6.2.4.1.3.5.1.1 | ||||||||||||||||
| dtmLinkStateIfMacAddressThe interfaces DTM physical address, i.e. a MAC identity. | SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… | .1.3.6.1.4.1.2928.6.2.4.1.3.5.1.2 | ||||||||||||||||
| dtmLinkStateIfNodeMacAddressThe node DTM physical address, i.e. a MAC identity. | SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… | .1.3.6.1.4.1.2928.6.2.4.1.3.5.1.3 | ||||||||||||||||
| dtmLinkStateIfNodeAddressThe nodes network DTM address. Returns the unspecified address (00.00.00.00.00.00.00.00) if unknown. | DtmAddress Type Constraints: range: 8 | .1.3.6.1.4.1.2928.6.2.4.1.3.5.1.4 | ||||||||||||||||
| dtmLinkStateLocalSubIfThe name of the sub-interface that is connected to this link, e.g. 'dtm2:1/rx' for a receiving part of an interface, or dtm2:1/tx for a transmitting part of an interface. | SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… | .1.3.6.1.4.1.2928.6.2.4.1.3.5.1.5 | ||||||||||||||||
| dtmLinkStateIfNodeStatusThe status of the communication with the neighboring node via this link. The link entry is removed from this table when the link is down. notApplicable(0) This value notApplicable(0) is always set for the… | Enumeration Enumerated Values:
| .1.3.6.1.4.1.2928.6.2.4.1.3.5.1.6 |
dtmTimeSourceTable
table.1.3.6.1.4.1.2928.6.2.4.1.7.6
·
1 row entry
·
10 columns
Uses the netinsight variant from
Command help
/opt/observium/mibs/netinsight.
Walk dtmTimeSourceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETI-DTM-MIB' -M '/opt/observium/mibs/netinsight:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETI-DTM-MIB::dtmTimeSourceTable'
A conceptual table containing time sources associated to time transfer capable interfaces.
An entry in the time source table.
Indexes
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| dtmTimeSourceIndexIndex in the dtmTimeSourceTable. | Integer32 Constraints: range: 1-2147483647 | .1.3.6.1.4.1.2928.6.2.4.1.7.6.1.1 | ||||||||||
| dtmTimeSourceNameThe name of the time source. | SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… | .1.3.6.1.4.1.2928.6.2.4.1.7.6.1.2 | ||||||||||
| dtmTimeSourceAdminStatusThe desired state of the interface. The administrative status controls whether the time source should be active or not. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.2928.6.2.4.1.7.6.1.3 | ||||||||||
| dtmTimeSourceOperStatusThe actual state of the time source. The value should follow the state of the Administrative Status (dtmIfAdminStatus) unless something fails (dtmTimeSourceOperStatus=down), `dormant' if another time source is the acti… | Enumeration Enumerated Values:
| .1.3.6.1.4.1.2928.6.2.4.1.7.6.1.4 | ||||||||||
| dtmTimeSourceTypeThe type of time interface that provides the time source represented by this entry. dsyp(1) A DTM synchronization source (dsyp) represents a DTM interface timing source and the synchronization control inf… | Enumeration Enumerated Values:
| .1.3.6.1.4.1.2928.6.2.4.1.7.6.1.5 | ||||||||||
| dtmTimeSourceRefA reference to the time interface that provides the time source represented by this entry. The value .0.0 is used when no such reference is available. | SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable… | .1.3.6.1.4.1.2928.6.2.4.1.7.6.1.6 | ||||||||||
| dtmTimeSourceRoundTripTimeThe round trip time in nanoseconds for sending data to the peer of the time interface providing this time source and back. The value 0 is used, the round trip time is not available. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.2928.6.2.4.1.7.6.1.7 | ||||||||||
| dtmTimeSourceTimeErrorThe time error in nanoseconds of the time source relative the node clock. The value 0 is used when the time error is not available. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.2928.6.2.4.1.7.6.1.8 | ||||||||||
| dtmTimeSourceCalibrationTimeErrorThe time error in nanoseconds of the time source relative the calibration reference. The value 0 is used when the time error is not available. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.2928.6.2.4.1.7.6.1.9 | ||||||||||
| dtmTimeSourceCalibrationRatioThe configured calibration offset in ppm compared to the nominal value of of the one-way (i.e. remote to local) to round trip time ratio. The nominal value of the ratio is 1/2, which is equivalent to a value of 0. | Integer32r/w Constraints: range: -499999-499999 | .1.3.6.1.4.1.2928.6.2.4.1.7.6.1.10 |