NETI-CHMGR-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
14
Rows
14
Columns
117

chmgrODescriptionTable

table
.1.3.6.1.4.1.2928.6.2.14.1.1.2 · 1 row entry · 20 columns
Open in standard view
Uses the netinsight variant from /opt/observium/mibs/netinsight.
Command help
Walk chmgrODescriptionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETI-CHMGR-MIB' -M '/opt/observium/mibs/netinsight:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETI-CHMGR-MIB::chmgrODescriptionTable' 
Descriptions on originating connections. The creation and
deletion of rows in the table is done by the application that
provides the service on the connection. When a row is
deleted, the associated rows in the destination table
chmgrODescrDestinationTable and channel table
chmgrODescrChannelTable are also deleted.
          
The table contains information about the capabilities of the
connections as well as the actual configuration of the
connections. As the capabilities depends on the type of
service, it is the service's application that is responsible
for defining these.
          
Changes made on a row in the table will take immediate
effect. This could result in a re-establishment of the
channel(s) using the new parameters.
chmgrODescriptionEntry row .1.3.6.1.4.1.2928.6.2.14.1.1.2.1
An entry in the table is representing the description and
configuration of one connection.
Indexes
Column Syntax OID
chmgrODescrIndex
Index for this entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.6.2.14.1.1.2.1.1
chmgrODescrType
This is the unique connection type identifier that defined
the type of service that the connection description
describes.

ets(1). Ethernet Transport Service (DTM LAN Transport).

its(2). I…
Enumeration
Enumerated Values:
1ets
2its
3dle
 .1.3.6.1.4.1.2928.6.2.14.1.1.2.1.2
chmgrODescrCapabilities
Connection capabilities that indicate which parameters that
are possible to configure in this connection description.

allowCapacityInterval(0)
Allows the configuration of capacity to have different values…
Bits
Enumerated Values:
0allowCapacityInterval
1destination
2allowDynamicCapacity
3isMulticast
4allowEstablish
5allowProtection
6allowReestablish
7allowScheduling
8allowSourceRoute
9requireCapacity
10allowAlternative
11allowZeroCapacity
 .1.3.6.1.4.1.2928.6.2.14.1.1.2.1.3
chmgrODescrCustomerId
This is a customer identifications number assigned by the
application that is providing the service on the
connection. The object has no functional use except to
provide the information.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.6.2.14.1.1.2.1.4
chmgrODescrServiceReference
This is a pointer to the application or service that owns
this connection description, and that is responsible for the
capabilities.
SNMPv2-TCRowPointer
Description:
Represents a pointer to a conceptual row. The value is the
name of the instance of the first accessible columnar object
in the conceptual row.

For example, ifIndex.3 would point to the 3rd row in the
ifTable…
 .1.3.6.1.4.1.2928.6.2.14.1.1.2.1.5
chmgrODescrAcceptableBps
The minimum payload capacity in bits per second for the
service using the channel. If it is not possible to allocate
this capacity, a channel will not be established. If the
acceptable capacity is larger than the maxim…
SNMPv2-SMIGauge32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.6.2.14.1.1.2.1.6
chmgrODescrAcceptableSlots
The minimum capacity in number of 512 kbps DTM slots. The
value is based on the chmgrAcceptableBps and the necessary
overhead required by the service for delivering the payload
capacity. The overhead is calculated by th…
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.6.2.14.1.1.2.1.7
chmgrODescrRequestedBps
The requested payload capacity in bits per second for the
service using the channel. If the requested capacity is
larger than the maximum value (4,294,967,295) bits per
second, then the `chmgrODescrRequestedMbps' must …
SNMPv2-SMIGauge32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.6.2.14.1.1.2.1.8
chmgrODescrRequestedSlots
The requested capacity in number of 512 kbps DTM slots. The
value is based on the chmgrRequestedBps and the necessary
overhead required by the service for delivering the payload
capacity. The overhead is calculated by t…
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.6.2.14.1.1.2.1.9
chmgrODescrReestablishMethod
The type of algorithm or method used to re-establish channels
that for some reason fail to be established or is torn down.
The methods are:

exponential(1)
Establishment attempts are done at time interval …
Enumerationr/w
Enumerated Values:
1exponential
 .1.3.6.1.4.1.2928.6.2.14.1.1.2.1.10
chmgrODescrMinInterval
The minimum time in milliseconds between two attempts to
establish the channel.
Unsigned32r/w
Constraints:
range: 0-3600000
 .1.3.6.1.4.1.2928.6.2.14.1.1.2.1.11
chmgrODescrMaxInterval
The maximum time in milliseconds between two attempts to
establish the channel. This value must be larger than
chmgrODescrMinInterval.
Unsigned32r/w
Constraints:
range: 0-3600000
 .1.3.6.1.4.1.2928.6.2.14.1.1.2.1.12
chmgrODescrEstablish
Describes if the connection shall be established with the
defined parameters. The value is only valid if the
allowEstablish(4) bit in chmgrODescrCapabilites is set.

true(1)
The connection is established.…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2928.6.2.14.1.1.2.1.13
chmgrODescrNextDestTableIndex
The value of the next available index for this connection
description in the chmgrODescrDestinationTable.
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.2928.6.2.14.1.1.2.1.14
chmgrODescrPrecedence
A channel with precedence is established and torn down before
any channel without precedence.

true(1)
The channel has precedence.

false(2)
The channel does not have precedence.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2928.6.2.14.1.1.2.1.15
chmgrODescrSuppressAlarms
Suppress generation of some alarms:

route(0)
Alarm raised if a service is not using its primary source route.
Bitsr/w
Enumerated Values:
0route
 .1.3.6.1.4.1.2928.6.2.14.1.1.2.1.16
chmgrODescrAcceptableMbps
The minimum payload capacity in units of 1,000,000 bits per
second for the service using the channel. If it is not
possible to allocate this capacity, a channel will not be
established. This object must be used when r…
SNMPv2-SMIGauge32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.6.2.14.1.1.2.1.17
chmgrODescrRequestedMbps
The requested payload capacity in units of 1,000,000 bits per
second for the service using the channel. This object must
be used when requesting a capacity larger than 4,294,967,295
bits per second. If a lower capacit…
SNMPv2-SMIGauge32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.6.2.14.1.1.2.1.18
chmgrODescrRequestedDcpVersion
The DCP version that should be used for channel established for
this connection. `any' means try with DCP3 first and revert to
DCP2 if unsuccessful because of node version mismatch.
DcpVersionr/w
Type Values:
1auto
2dcp2
3dcp3
 .1.3.6.1.4.1.2928.6.2.14.1.1.2.1.19
chmgrODescrOneHopSpareCapUtilization
Specifies if the the channel shall dynamically allocate spare
capacity.

When `true', then the channel is initially established with
the acceptable capacity specified in chmgrODescrAcceptableBps
(or chmgrO…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2928.6.2.14.1.1.2.1.20

chmgrODescrDestinationTable

table
.1.3.6.1.4.1.2928.6.2.14.1.1.3 · 1 row entry · 5 columns
Open in standard view
Uses the netinsight variant from /opt/observium/mibs/netinsight.
Command help
Walk chmgrODescrDestinationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETI-CHMGR-MIB' -M '/opt/observium/mibs/netinsight:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETI-CHMGR-MIB::chmgrODescrDestinationTable' 
The table describes destinations for a connection. A unicast
connection can normally only have one destination, while a
multicast connection may have several destinations.
          
If a unicast connection allows alternative destinations, as
defined by the allowAlternative(10) bit in
chmgrODescrCapabilities, it is allowed to define multiple
destinations. At channel establishment, the destinations will
be tried in succession until a channel is successfully
established.
          
It is possible to add, change and delete destinations while
the connection is active. For a unicast connection, a
changed destination is torn down as soon as it is changed,
and established as soon as the changed information contains
valid data. For a multicast connection, it is possible to
add and delete destinations to an already established
connection without affecting the connection to the other
destinations. An added destination will be established as
soon as it includes valid information, and will be
re-established as soon as the information is changed.
          
Note that a destination address with an empty string can be
used to disable the destination. For a multicast connection 
a single destination can also be enabled and disabled using 
its administrative status. 
          
The bits allowAlternative(10), destination(1) and
allowMulticast(3) in chmgrODescCapabilities describes
if and how it is allowed to add a destination to a
connection.
chmgrODescrDestinationEntry row .1.3.6.1.4.1.2928.6.2.14.1.1.3.1
An entry in the table represents one destination.
Indexes
Column Syntax OID
chmgrODescrDestIndex
The index for this entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.6.2.14.1.1.3.1.1
chmgrODescrDestAddress
The DTM address for a destination termination point of the
connection. The empty string indicates an unconfigured
destination. The address should be the last object to
configure to avoid unnecessary channel establishmen…
DtmNoder/w
Type Constraints:
range: 0..64
 .1.3.6.1.4.1.2928.6.2.14.1.1.3.1.2
chmgrODescrDestDsti
The DSTI (DTM Service Type Instance) for the destination
termination point of the connection.
Dstir/w
Type Constraints:
range: 0..32769
 .1.3.6.1.4.1.2928.6.2.14.1.1.3.1.3
chmgrODescrDestRowStatus
See SNMPv2-TC. The following values are supported:

active(1)
The object always reads active(1).

createAndGo(4)
A new conceptual row is created representing a new
destination.
…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2928.6.2.14.1.1.3.1.4
chmgrODescrDestAdminStatus
The administrative state of the destination. The value
controls the desired state of the multicast connection
to the destination.

up(1). The connection shall be established to the
destination.
…
Enumerationr/w
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.2928.6.2.14.1.1.3.1.5

chmgrODescrChannelTable

table
.1.3.6.1.4.1.2928.6.2.14.1.1.4 · 1 row entry · 4 columns
Open in standard view
Uses the netinsight variant from /opt/observium/mibs/netinsight.
Command help
Walk chmgrODescrChannelTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETI-CHMGR-MIB' -M '/opt/observium/mibs/netinsight:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETI-CHMGR-MIB::chmgrODescrChannelTable' 
The table describes relationships between destinations
defined in the chmgrODescrDestinationTable, channels and
source routes. To make a connection to a destination 1+1
protected, create two rows representing the two channels in
the table. Note that this is only allowed if the bit
allowProtection(5) is set in chmgrODescrCapabilities.
          
If no conceptual row exists for a destination, it is assumed
that there shall be only one channel to the destination and
that no source route is shall be used.
          
A channel to a destination may have its route through the DTM
networks defined by one or many source routes. If multiple
source routes are defined, any one of these source routes is
chosen when the channel is established.
chmgrODescrChannelEntry row .1.3.6.1.4.1.2928.6.2.14.1.1.4.1
An entry in this table represents the relationship between
one channel in the connection (defined in
chmgrODescrDestinationTable) and one source route (defined in
chmgrSourceRouteTable).
Indexes
Column Syntax OID
chmgrODescrChanIndex
The index of the channel used by the connection.
Unsigned32
Constraints:
range: 1-2
 .1.3.6.1.4.1.2928.6.2.14.1.1.4.1.1
chmgrODescrChanSourceRouteIndex
The index of the row describing the relationship to one
source route.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.6.2.14.1.1.4.1.2
chmgrODescrChanSourceRoute
The index in the chmgrOSourceRouteTable representing the
desired source route for the channel to the destination. If
no source route shall be used by the channel for this
destination, delete the conceptual row or set th…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.6.2.14.1.1.4.1.3
chmgrODescrChanRowStatus
See SNMPv2-TC. The following values are supported:

active(1)
The object always reads active(1).

createAndGo(4)
a new conceptual row is created representing a channel is
added.
…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2928.6.2.14.1.1.4.1.4

chmgrSourceRouteTable

table
.1.3.6.1.4.1.2928.6.2.14.1.3.2 · 1 row entry · 6 columns
Open in standard view
Uses the netinsight variant from /opt/observium/mibs/netinsight.
Command help
Walk chmgrSourceRouteTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETI-CHMGR-MIB' -M '/opt/observium/mibs/netinsight:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETI-CHMGR-MIB::chmgrSourceRouteTable' 
Table listing source routes. A source route is a route
through the DTM net that is defined at the source of the
channel. The source routes may be used by many connections,
making the connections using the same route through the DTM
network. A source route may only be updated or deleted when
it is not used by any established connection.
          
Note that a source route set up as loose, with no
intermediate nodes, and set up to use any outgoing interface
is equivalent to a shortest path routing.
chmgrSourceRouteEntry row .1.3.6.1.4.1.2928.6.2.14.1.3.2.1
An entry representing one source route.
Indexes
Column Syntax OID
chmgrSourceRouteIndex
The index for this entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.6.2.14.1.3.2.1.1
chmgrSourceRouteName
A string for administrative use that identifies or describes
the source route. The string does not have to be unique.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2928.6.2.14.1.3.2.1.2
chmgrSourceRouteTypeOfRoute
The type of source route that shall be used.

strict(1)
The channel must only pass the hops defined in the source
route.

loose(2)
The channel must pass all the hops defined in the source
rou…
Enumerationr/w
Enumerated Values:
1strict
2loose
 .1.3.6.1.4.1.2928.6.2.14.1.3.2.1.3
chmgrSourceRouteFirstIfBoard
The identity of the board where the DTM interface is located
that shall be used for leaving the node. A value of zero (0)
means that any board may be used. A DTM interface is
identified by a board and a port on that boa…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.6.2.14.1.3.2.1.4
chmgrSourceRouteFirstIfPort
The identity of the port on the board specified in
chmgrSourceRouteFirstIfBoard that shall be used for leaving
the node. A value of zero (0) means that any port may be
used. A DTM interface is identified by a board and …
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.6.2.14.1.3.2.1.5
chmgrSourceRouteRowStatus
Se SNMPv2-TC. Supports createAndGo(4) and destroy(6).

createAndGo(4)
A new row is created representing a new
source route.

destroy(6)
A row is deleted. All rows in the chmgrSourceRouteHopTa…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2928.6.2.14.1.3.2.1.6

chmgrSourceRouteHopTable

table
.1.3.6.1.4.1.2928.6.2.14.1.3.3 · 1 row entry · 5 columns
Open in standard view
Uses the netinsight variant from /opt/observium/mibs/netinsight.
Command help
Walk chmgrSourceRouteHopTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETI-CHMGR-MIB' -M '/opt/observium/mibs/netinsight:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETI-CHMGR-MIB::chmgrSourceRouteHopTable' 
Table describing the nodes and interfaces for intermediate nodes
that a source route shall be using.
chmgrSourceRouteHopEntry row .1.3.6.1.4.1.2928.6.2.14.1.3.3.1
An entry describes one hop for a source route.
Indexes
Column Syntax OID
chmgrSourceRouteHopIndex
The index for this conceptual row.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.6.2.14.1.3.3.1.1
chmgrSourceRouteHopAddress
The DTM address of the node.
DtmNoder/w
Type Constraints:
range: 0..64
 .1.3.6.1.4.1.2928.6.2.14.1.3.3.1.2
chmgrSourceRouteHopNextIfBoard
The identity of the board where the DTM interface is located
that shall be used for leaving the node. A value of zero (0)
means that any board may be used. A DTM interface is
identified by a card and a port on that boa…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.6.2.14.1.3.3.1.3
chmgrSourceRouteHopNextIfPort
The identity of the port on the board specified in
chmgrSourceRouteFirstIfCard that shall be used for leaving
the node. A value of zero (0) means that any port may be
used. A DTM interface is identified by a board and a…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.6.2.14.1.3.3.1.4
chmgrSourceRouteHopRowStatus
See SNMPv2-TC. The following values are supported:

active(1)
The object always reads active(1).

createAndGo(4)
A new conceptual row is created.

destroy(6)
The conceptual row …
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2928.6.2.14.1.3.3.1.5

chmgrOConnectionTable

table
.1.3.6.1.4.1.2928.6.2.14.1.4.2 · 1 row entry · 16 columns
Open in standard view
Uses the netinsight variant from /opt/observium/mibs/netinsight.
Command help
Walk chmgrOConnectionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETI-CHMGR-MIB' -M '/opt/observium/mibs/netinsight:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETI-CHMGR-MIB::chmgrOConnectionTable' 
The table lists all the originating connections. The
connections are configured in the chmgrODescriptionTable.
chmgrOConnectionEntry row .1.3.6.1.4.1.2928.6.2.14.1.4.2.1
An entry in the table representing one originating connection.
Indexes
Column Syntax OID
chmgrOConnIndex
The index of the connection in the table.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.6.2.14.1.4.2.1.1
chmgrOConnCustomerId
This is a customer identification number assigned by the
application that is providing the service on the
connection. The object has no functional use except to
provide the information. This is the same value as
chmgrOD…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.6.2.14.1.4.2.1.2
chmgrOConnODescrIndex
A reference to the chmgrODescriptionTable. It is the index in
the chmgrODescriptionTable for the description that describes
the configuration of this connection.
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.2928.6.2.14.1.4.2.1.3
chmgrOConnServiceReference
A reference to the service responsible for this connection.
The object points to the instance of the service in the
service's MIB. Its MIB shall have a table representing all
the instances of the service.
SNMPv2-TCRowPointer
Description:
Represents a pointer to a conceptual row. The value is the
name of the instance of the first accessible columnar object
in the conceptual row.

For example, ifIndex.3 would point to the 3rd row in the
ifTable…
 .1.3.6.1.4.1.2928.6.2.14.1.4.2.1.4
chmgrOConnAllocatedSlots
The number of 512 kbps DTM slots that is allocated by the
connection. Note that for a connection with multiple
channels, e.g. 1+1 protected connection, all the channels
have the same capacity.

To know how…
Unsigned32
Constraints:
range: 0-8389
 .1.3.6.1.4.1.2928.6.2.14.1.4.2.1.5
chmgrOConnAllocatedSlotsChanged
The value of sysUpTime when the allocated capacity for the
connection was last changed.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.2928.6.2.14.1.4.2.1.6
chmgrOConnDcapType
The DCAP (DTM Channel Adaptation Protocol) type for the
connection.
DcapType
Type Values:
1dcap0
2dcap1
 .1.3.6.1.4.1.2928.6.2.14.1.4.2.1.7
chmgrOConnDst
The DST (DTM Service Type) of the service that uses the
connection.
Dst
Type Values:
0ctrl
1dleCrtlAndData
4pdh
5dleInterServer
8ets
12ping
13e1
14ds1
15sdi
16dvb
18sdh
19ttcp
20aesebu
21j2kSdSdi
22j2kHdSdi
23j2k3gSdi
24j2kHdSdi2
25j2k3gSdi2
26j2kSdSdi2
 .1.3.6.1.4.1.2928.6.2.14.1.4.2.1.8
chmgrOConnSourceAddress
The DTM address of the originating node for the connection.
DtmNode
Type Constraints:
range: 0..64
 .1.3.6.1.4.1.2928.6.2.14.1.4.2.1.9
chmgrOConnSourceDsti
The DSTI (DTM Service Type Instance) of the service at the
originating node of the connection.
Dsti
Type Constraints:
range: 0..32769
 .1.3.6.1.4.1.2928.6.2.14.1.4.2.1.10
chmgrOConnStatusLastChanged
The value of sysUpTime when the operational status of the
connection was last changed.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.2928.6.2.14.1.4.2.1.11
chmgrOConnAdminStatus
Information about the administrative state of the
connection. The administrative state is controlled by the
application that provides the service transported on the
connection. The application sets the administrative st…
Enumeration
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.2928.6.2.14.1.4.2.1.12
chmgrOConnOperStatus
The operational state of the connection. In general, the
operational state should follow the administrative state,
chmgrOConnAdminStatus.

up(1)
The connection is up to all its destination on all its
chann…
Enumeration
Enumerated Values:
1up
2down
3partial
5dormant
 .1.3.6.1.4.1.2928.6.2.14.1.4.2.1.13
chmgrOConnReestablish
Writing to this object immediately starts to re-establish the
connection to all its destinations. The establishment of the
connection will be done according to the current network
topology and availability. If source …
Enumerationr/w
Enumerated Values:
0notApplicable
1reestablish
 .1.3.6.1.4.1.2928.6.2.14.1.4.2.1.14
chmgrOConnForceSourceRoute
Writing to this object immediately starts to re-establish the
connection to the destinations and channels using the source
route specified with the written value. The value written
controls which source route to first …
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.6.2.14.1.4.2.1.15
chmgrOConnDcpVersion
Version of DCP that is used for this connection. `any(0)'
means that a channel is not established.
DcpVersion
Type Values:
1auto
2dcp2
3dcp3
 .1.3.6.1.4.1.2928.6.2.14.1.4.2.1.16

chmgrODestinationTable

table
.1.3.6.1.4.1.2928.6.2.14.1.4.3 · 1 row entry · 2 columns
Open in standard view
Uses the netinsight variant from /opt/observium/mibs/netinsight.
Command help
Walk chmgrODestinationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETI-CHMGR-MIB' -M '/opt/observium/mibs/netinsight:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETI-CHMGR-MIB::chmgrODestinationTable' 
List of destinations per origination connection.
chmgrODestinationEntry row .1.3.6.1.4.1.2928.6.2.14.1.4.3.1
An entry represents one destination for a connection.
Indexes
Column Syntax OID
chmgrODestDestinationAddress
The DTM address of a destination node.
DtmNode
Type Constraints:
range: 0..64
 .1.3.6.1.4.1.2928.6.2.14.1.4.3.1.1
chmgrODestDestinationDsti
The DSTI (DTM Service Type Instance) of the service at the
destination node.
Dsti
Type Constraints:
range: 0..32769
 .1.3.6.1.4.1.2928.6.2.14.1.4.3.1.2

chmgrOChannelTable

table
.1.3.6.1.4.1.2928.6.2.14.1.4.4 · 1 row entry · 7 columns
Open in standard view
Uses the netinsight variant from /opt/observium/mibs/netinsight.
Command help
Walk chmgrOChannelTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETI-CHMGR-MIB' -M '/opt/observium/mibs/netinsight:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETI-CHMGR-MIB::chmgrOChannelTable' 
Table that shows the status for all the originating channels, 
listed per connection and destination.
chmgrOChannelEntry row .1.3.6.1.4.1.2928.6.2.14.1.4.4.1
An entry per channel.
Indexes
Column Syntax OID
chmgrOChanSourceRouteIndex
The source route index that is referring to the source route
currently used by the the channel. This is the value of the
index chmgrODescrChanSourceRouteIndex in
chmgrODescrChannelTable. A value of '0' would mean the …
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.6.2.14.1.4.4.1.1
chmgrOChanChannelId
The identity of the DTM channel. If no channel is
established, the value is zero (0).
ChannelId .1.3.6.1.4.1.2928.6.2.14.1.4.4.1.2
chmgrOChanErrorMessage
Contains a message describing the error if the channel is
down due to an error. If there are no error, the objects
returns an empty string.
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2928.6.2.14.1.4.4.1.3
chmgrOChanErrorAddress
Contains the DTM address if the node that is reporting an
error, described in chmgrOChanErrorMessage. If there are no
error, the object returns the address
00.00.00.00.00.00.00.00.
DtmNode
Type Constraints:
range: 0..64
 .1.3.6.1.4.1.2928.6.2.14.1.4.4.1.4
chmgrOChanOperStatus
The operational status of the channel. If the operational
status of the connection is up, indicated in
chmgrOConnOperStatus, a value of up(1) indicates that the
channel is operational, and a value of down(2) indicates t…
Enumeration
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.2928.6.2.14.1.4.4.1.5
chmgrOChanStatusChanged
The sysUpTime when the status of the channel to the
destination was last established or torn down.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.2928.6.2.14.1.4.4.1.6
chmgrOChanReestablish
Writing to this object re-establishes the channel to its
destination without affecting other channels or destinations
configured for this connection. The establishment of the
channel will be done according to the curren…
Enumerationr/w
Enumerated Values:
0notApplicable
1reestablish
 .1.3.6.1.4.1.2928.6.2.14.1.4.4.1.7

chmgrTConnectionTable

table
.1.3.6.1.4.1.2928.6.2.14.1.5.2 · 1 row entry · 17 columns
Open in standard view
Uses the netinsight variant from /opt/observium/mibs/netinsight.
Command help
Walk chmgrTConnectionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETI-CHMGR-MIB' -M '/opt/observium/mibs/netinsight:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETI-CHMGR-MIB::chmgrTConnectionTable' 
Table with termination connections. The table is managed by
the applications that provide services transported on the
connections.
chmgrTConnectionEntry row .1.3.6.1.4.1.2928.6.2.14.1.5.2.1
An entry represents one connection.
Indexes
Column Syntax OID
chmgrTConnIndex
Index for this entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.6.2.14.1.5.2.1.1
chmgrTConnCustomerId
This is a customer identification number assigned by the
application that is providing the service on the
connection. The object has no functional use except to
provide the information.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.6.2.14.1.5.2.1.2
chmgrTConnNumberOfChannels
The number of channels this connection uses. A 1+1 protected
connection uses two channels.
Unsigned32
Constraints:
range: 1-2
 .1.3.6.1.4.1.2928.6.2.14.1.5.2.1.3
chmgrTConnActiveChannel
The channel that is currently active. This is the index of
the channel in the chmgrTChannelTable. If there is no active
channel for the connection, the value is zero (0).
Unsigned32
Constraints:
range: 0-2
 .1.3.6.1.4.1.2928.6.2.14.1.5.2.1.4
chmgrTConnServiceReference
A reference to the service responsible for this connection.
The object points to the instance of the service in the
service's MIB. Its MIB shall have a table representing all
the instances of the service.
SNMPv2-TCRowPointer
Description:
Represents a pointer to a conceptual row. The value is the
name of the instance of the first accessible columnar object
in the conceptual row.

For example, ifIndex.3 would point to the 3rd row in the
ifTable…
 .1.3.6.1.4.1.2928.6.2.14.1.5.2.1.5
chmgrTConnAllocatedSlots
The number of 512 kbps DTM slots that is allocated by the
connection. Note that for a connection with multiple
channels, e.g. 1+1 protected connection, all the channels
have the same capacity.

To know how…
Unsigned32
Constraints:
range: 0-8389
 .1.3.6.1.4.1.2928.6.2.14.1.5.2.1.6
chmgrTConnAllocatedSlotsChanged
The value of sysUpTime when the capacity for the connection
was last changed.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.2928.6.2.14.1.5.2.1.7
chmgrTConnDcapType
The DCAP (DTM Channel Adaptation Protocol) type for the
connection.
DcapType
Type Values:
1dcap0
2dcap1
 .1.3.6.1.4.1.2928.6.2.14.1.5.2.1.8
chmgrTConnDst
The DST (DTM Service Type) of the service that uses the
connection.
Dst
Type Values:
0ctrl
1dleCrtlAndData
4pdh
5dleInterServer
8ets
12ping
13e1
14ds1
15sdi
16dvb
18sdh
19ttcp
20aesebu
21j2kSdSdi
22j2kHdSdi
23j2k3gSdi
24j2kHdSdi2
25j2k3gSdi2
26j2kSdSdi2
 .1.3.6.1.4.1.2928.6.2.14.1.5.2.1.9
chmgrTConnSourceDsti
The DSTI (DTM Service Type Instance) of the service at the
originating node of the connection.
Dsti
Type Constraints:
range: 0..32769
 .1.3.6.1.4.1.2928.6.2.14.1.5.2.1.10
chmgrTConnSourceAddress
The DTM address of the connection's originating node.
DtmNode
Type Constraints:
range: 0..64
 .1.3.6.1.4.1.2928.6.2.14.1.5.2.1.11
chmgrTConnDestinationDsti
The DSTI (DTM Service Type Instance) of the service at the
terminating node of the connection.
Dsti
Type Constraints:
range: 0..32769
 .1.3.6.1.4.1.2928.6.2.14.1.5.2.1.12
chmgrTConnDestinationAddress
The DTM address of the connection's terminating node.
DtmNode
Type Constraints:
range: 0..64
 .1.3.6.1.4.1.2928.6.2.14.1.5.2.1.13
chmgrTConnStatusLastChanged
The value of sysUpTime when the operational status of the
connection was last changed.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.2928.6.2.14.1.5.2.1.14
chmgrTConnAdminStatus
The administrative state of the connection. The
administrative state is controlled by the application that
provides a service on the connection. It may be accessed in
the service's MIB, where the instance is described b…
Enumeration
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.2928.6.2.14.1.5.2.1.15
chmgrTConnOperStatus
The operational state of the connection. It should follow the
administrative state described in chmgrTConnAdminStatus.

up(1)
A channel has been established.

down(2)
No channels are establis…
Enumeration
Enumerated Values:
1up
2down
5dormant
 .1.3.6.1.4.1.2928.6.2.14.1.5.2.1.16
chmgrTConnDcpVersion
Version of DCP that is used for this connection. `any(0)'
means that a channel is not established.
DcpVersion
Type Values:
1auto
2dcp2
3dcp3
 .1.3.6.1.4.1.2928.6.2.14.1.5.2.1.17

chmgrTChannelTable

table
.1.3.6.1.4.1.2928.6.2.14.1.5.3 · 1 row entry · 3 columns
Open in standard view
Uses the netinsight variant from /opt/observium/mibs/netinsight.
Command help
Walk chmgrTChannelTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETI-CHMGR-MIB' -M '/opt/observium/mibs/netinsight:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETI-CHMGR-MIB::chmgrTChannelTable' 
The channels that exists on a terminating connection.  The
table is managed by the application that provides the service
on the connection. A row is inserted when a new channel is
established and is removed when a channel is torn down. For a
1+1 protected connection, there are two channels in a
connection.
chmgrTChannelEntry row .1.3.6.1.4.1.2928.6.2.14.1.5.3.1
An entry in the table represents a channel on a connection.
Indexes
Column Syntax OID
chmgrTChanIndex
The index for the channel within the connection. If a
connection is 1+1 protected, is consists of two channels.
Unsigned32
Constraints:
range: 1-2
 .1.3.6.1.4.1.2928.6.2.14.1.5.3.1.1
chmgrTChanChannelId
The identity of the DTM channel. If no channel is
established, the value is zero (0).
ChannelId .1.3.6.1.4.1.2928.6.2.14.1.5.3.1.2
chmgrTChanCreated
The sysUpTime when the channel was created.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.2928.6.2.14.1.5.3.1.3

chmgrOStatDcap1Table

table
.1.3.6.1.4.1.2928.6.2.14.1.6.1 · 1 row entry · 7 columns
Open in standard view
Uses the netinsight variant from /opt/observium/mibs/netinsight.
Command help
Walk chmgrOStatDcap1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETI-CHMGR-MIB' -M '/opt/observium/mibs/netinsight:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETI-CHMGR-MIB::chmgrOStatDcap1Table' 
The table shows statistics for originating DCAP-1
connections.  It uses the same index as the
chmgrOConnectionTable. Note that all connections are not of
the type DCAP-1, and are hence not represented in this
table.
chmgrOStatDcap1Entry row .1.3.6.1.4.1.2928.6.2.14.1.6.1.1
An entry represents statistics for one originating
connection.
Indexes
Column Syntax OID
chmgrOStatDcap1Octets
The total number of out-bound octets (bytes) on the
connection.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.6.2.14.1.6.1.1.1
chmgrOStatDcap1Packets
The total number of out-bound packets on the connection.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.6.2.14.1.6.1.1.2
chmgrOStatDcap1UtilizedBps
The utilization in bits per second on the connection as mean
value during the last 30 seconds
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.6.2.14.1.6.1.1.3
chmgrOStatDcap1DiscardOctets
The number of out-bound octets which were chosen to be
discarded even though no errors had been detected to prevent
their being transmitted. One possible reason for discarding
such a packet could be to free up buffer sp…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.6.2.14.1.6.1.1.4
chmgrOStatDcap1DiscardPackets
The number of out-bound packets which were chosen to be
discarded even though no errors had been detected to prevent
their being transmitted. One possible reason for discarding
such a packet could be to free up buffer s…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.6.2.14.1.6.1.1.5
chmgrOStatDcap1Bitrate
The utilization in bits per second on the connection as mean
value measured during the last 30 seconds. This value is a
64-bit equivalent to chmgrOStatDcap1UtilizedBps.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2928.6.2.14.1.6.1.1.6
chmgrOStatDcap1Load
The utilization (load) in percent on the connection as mean
value measured during the last 30 seconds.
Unsigned32
Constraints:
range: 0-100
 .1.3.6.1.4.1.2928.6.2.14.1.6.1.1.7

chmgrTStatDcap1Table

table
.1.3.6.1.4.1.2928.6.2.14.1.6.2 · 1 row entry · 9 columns
Open in standard view
Uses the netinsight variant from /opt/observium/mibs/netinsight.
Command help
Walk chmgrTStatDcap1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETI-CHMGR-MIB' -M '/opt/observium/mibs/netinsight:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETI-CHMGR-MIB::chmgrTStatDcap1Table' 
The table shows statistics for terminating DCAP-1
connections.  It uses the same index as the
chmgrTConnectionTable. Note that all connections are not of
the type DCAP-1, and are hence not represented in this
table.
chmgrTStatDcap1Entry row .1.3.6.1.4.1.2928.6.2.14.1.6.2.1
An entry representing statistics for one terminating
connection.
Indexes
Column Syntax OID
chmgrTStatDcap1Octets
The total number of in-bound octets (bytes) on the
connection.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.6.2.14.1.6.2.1.1
chmgrTStatDcap1Packets
The total number of in-bound packets on the connection.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.6.2.14.1.6.2.1.2
chmgrTStatDcap1UtilizedBps
The utilization in bits per second on the connection as a
mean value during the last 30 seconds.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.6.2.14.1.6.2.1.3
chmgrTStatDcap1DiscardOctets
The number of in-bound octets which were chosen to be
discarded even though no errors had been detected to prevent
their being transmitted. One possible reason for discarding
such a packet could be to free up buffer spa…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.6.2.14.1.6.2.1.4
chmgrTStatDcap1DiscardPackets
The number of in-bound packets which were chosen to be
discarded even though no errors had been detected to prevent
their being transmitted. One possible reason for discarding
such a packet could be to free up buffer sp…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.6.2.14.1.6.2.1.5
chmgrTStatDcap1ErrorCRC
The number of CRC32 errors detected on in-bound packets for
the connection.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.6.2.14.1.6.2.1.6
chmgrTStatDcap1ErrorLods
The number of LODS errors detected on in-bound data.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.6.2.14.1.6.2.1.7
chmgrTStatDcap1Bitrate
The utilization in bits per second on the connection as mean
value measured during the last 30 seconds. This value is a
64-bit equivalent to chmgrTStatDcap1UtilizedBps.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2928.6.2.14.1.6.2.1.8
chmgrTStatDcap1Load
The utilization (load) in percent on the connection as mean
value measured during the last 30 seconds.
Unsigned32
Constraints:
range: 0-100
 .1.3.6.1.4.1.2928.6.2.14.1.6.2.1.9

chmgrTStatPMReferenceTable

table deprecated
.1.3.6.1.4.1.2928.6.2.14.1.6.3 · 1 row entry · 1 columns
Open in standard view
Uses the netinsight variant from /opt/observium/mibs/netinsight.
Command help
Walk chmgrTStatPMReferenceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETI-CHMGR-MIB' -M '/opt/observium/mibs/netinsight:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETI-CHMGR-MIB::chmgrTStatPMReferenceTable' 
Table with reference to Performance Monitoring Data for the
connections. It uses the same index as the
chmgrOConnectionTable. Note that all connections are not
represented in this table.
chmgrTStatPMReferenceEntry row .1.3.6.1.4.1.2928.6.2.14.1.6.3.1
An entry in the table.
Indexes
Column Syntax OID
chmgrTStatPMReferencedeprecated
A reference to a row in a table that shows performance data
for the connection. The table is not part of this MIB.
SNMPv2-TCRowPointer
Description:
Represents a pointer to a conceptual row. The value is the
name of the instance of the first accessible columnar object
in the conceptual row.

For example, ifIndex.3 would point to the 3rd row in the
ifTable…
 .1.3.6.1.4.1.2928.6.2.14.1.6.3.1.1

chmgrChannelTable

table
.1.3.6.1.4.1.2928.6.2.14.1.7.1 · 1 row entry · 15 columns
Open in standard view
Uses the netinsight variant from /opt/observium/mibs/netinsight.
Command help
Walk chmgrChannelTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETI-CHMGR-MIB' -M '/opt/observium/mibs/netinsight:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETI-CHMGR-MIB::chmgrChannelTable' 
Table with all channels, that is originating, transiting or 
terminating channels.
chmgrChannelEntry row .1.3.6.1.4.1.2928.6.2.14.1.7.1.1
An entry represents one branch of the channel. There table
has on entry for each channel branch that is transiting and
terminating in the node.
Indexes
Column Syntax OID
chmgrChanSourceMacAddress
The MAC address of the node where the channel originates.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2928.6.2.14.1.7.1.1.1
chmgrChanChannelId
The identity of the DTM channel.
ChannelId .1.3.6.1.4.1.2928.6.2.14.1.7.1.1.2
chmgrChanOutgoingIfBoard
The identity of the board where the DTM interface is located
on which this branch of the channel leaves this node. If the
channel branch does not leave this node, then the value is 0.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.6.2.14.1.7.1.1.3
chmgrChanOutgoingIfPort
The identity of the port on the board specified in
chmgrChanOutgoingIfBoard for the DTM interface, on which this
branch of the channel leaves the this node. If the channel
branch does not leave this node, then the value…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.6.2.14.1.7.1.1.4
chmgrChanOutgoingIfMacAddress
The MAC address of the DTM interface on which this branch of
the channel leaves this node.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2928.6.2.14.1.7.1.1.5
chmgrChanNextHopMacAddress
The MAC address for the next-hop DTM node.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2928.6.2.14.1.7.1.1.6
chmgrChanNextHopDtmAddress
The DTM address for the next-hop DTM node.
NETI-DTM-MIBDtmAddress
Type Constraints:
range: 8
 .1.3.6.1.4.1.2928.6.2.14.1.7.1.1.7
chmgrChanIncomingIfBoard
The identity of the board where the DTM interface is located
on which this channel is entering this node. If the channel
originates in this node, then the value is 0.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.6.2.14.1.7.1.1.8
chmgrChanIncomingIfPort
The identity of the port on the board specified in
chmgrChanIncomingIfBoard for the DTM interface, on which this
channels is entering this node. If the channel originates in
this node, then the value is 0.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.6.2.14.1.7.1.1.9
chmgrChanSourceDtmAddress
The DTM address of the node where the channel originates.
NETI-DTM-MIBDtmAddress
Type Constraints:
range: 8
 .1.3.6.1.4.1.2928.6.2.14.1.7.1.1.10
chmgrChanDst
The DST (DTM Service Type) of the service that uses the
channel.
Dst
Type Values:
0ctrl
1dleCrtlAndData
4pdh
5dleInterServer
8ets
12ping
13e1
14ds1
15sdi
16dvb
18sdh
19ttcp
20aesebu
21j2kSdSdi
22j2kHdSdi
23j2k3gSdi
24j2kHdSdi2
25j2k3gSdi2
26j2kSdSdi2
 .1.3.6.1.4.1.2928.6.2.14.1.7.1.1.11
chmgrChanSourceDsti
The DSTI (DTM Service Type Instance) of the service at the
originating node of the channel.
Dsti
Type Constraints:
range: 0..32769
 .1.3.6.1.4.1.2928.6.2.14.1.7.1.1.12
chmgrChanIsMulticast
Describes if the channel is a multicast or unicast type.

true(1)
The channel is a multicast channel.

false(2)
The channel is a unicast channel.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2928.6.2.14.1.7.1.1.13
chmgrChanCapacity
The capacity of the channel in 512 kbps slots.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.6.2.14.1.7.1.1.14
chmgrChanDestDsti
The DSTI (DTM Service Type Instance) of the terminating part
of the service. This value is only valid for an entry
describing a channel branch that is terminating on the
node. Its value is 0 for an entry describing a ch…
Dsti
Type Constraints:
range: 0..32769
 .1.3.6.1.4.1.2928.6.2.14.1.7.1.1.15