NETGEAR-ROUTING6-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
14
Rows
14
Columns
74
agentIpv6InterfaceTable
table.1.3.6.1.4.1.4526.10.30.1.2
·
1 row entry
·
8 columns
Uses the netgear variant from
Command help
/opt/observium/mibs/netgear.
Walk agentIpv6InterfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-ROUTING6-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-ROUTING6-MIB::agentIpv6InterfaceTable'
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| agentIpv6InterfaceIfIndexThe IfIndex associated with this instance. | Integer32 Constraints: range: 0-2147483647 | .1.3.6.1.4.1.4526.10.30.1.2.1.1 | ||||
| agentIpv6InterfaceMtuValueConfigures the MTU value for this interface. The applicable range is 68 to the <interface MTU value - 18>, in bytes. If it is not yet configured, retrieving the value of this object results in a zero value. Setting th… | Unsigned32r/w Constraints: range: 1280-9198range: 0-0 | .1.3.6.1.4.1.4526.10.30.1.2.1.2 | ||||
| agentIpv6InterfaceDadTransmitsConfigures the dad transmits value for this interface. | Integer32r/w Constraints: range: 0-100 | .1.3.6.1.4.1.4526.10.30.1.2.1.3 | ||||
| agentIpv6InterfaceLinkLocalOnlyWhen enabled, interface is capable of ipv6 operation without a global address. In this case, an eui-64 based link-local address is used. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.4526.10.30.1.2.1.4 | ||||
| agentIpv6InterfaceIcmpUnreachablesIf this object is enable, it indicates that ICMPv6 unreachables can be sent on this interface. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.4526.10.30.1.2.1.5 | ||||
| agentIpv6InterfaceAutoconfigIf this object is enabled, it indicates that the IPv6 address is automatically generated using IPv6 stateless address auto configuration. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.4526.10.30.1.2.1.6 | ||||
| agentIpv6InterfaceDhcpClientIf this object is enabled, the interface uses DHCPv6 Client protocol to acquire an IPv6 address. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.4526.10.30.1.2.1.7 | ||||
| agentIpv6InterfaceIcmpRedirectsEnable/Disable the sending of ICMPv6 redirect messages in the redirect scenario where the forwarded packet is sent out through the same interface on which the packet was received. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.4526.10.30.1.2.1.8 |
.1.3.6.1.4.1.4526.10.30.1.3
·
1 row entry
·
9 columns
Uses the netgear variant from
Command help
/opt/observium/mibs/netgear.
Walk agentIpv6RouterAdvertisementTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-ROUTING6-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-ROUTING6-MIB::agentIpv6RouterAdvertisementTable'
There is no global administrative flag for router advertisement. The global routing flag (agentIpv6RoutingMode) will be used for this purpose. If routing is disabled, router advertisement is disabled as well.
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| agentIpv6RouterAdvertisementIfIndexInterface Number to configure Router Advertisement on. | Integer32 Constraints: range: 0-2147483647 | .1.3.6.1.4.1.4526.10.30.1.3.1.1 | ||||
| agentIpv6RouterAdvertisementSuppressModeEnable or disable router advertisement suppression on the interface. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.4526.10.30.1.3.1.2 | ||||
| agentIpv6RouterAdvertisementMaxAdvertisementIntervalMaximum time allowed between sending router advertisements from the interface. | Integer32r/w Constraints: range: 4-1800 | .1.3.6.1.4.1.4526.10.30.1.3.1.3 | ||||
| agentIpv6RouterAdvertisementAdvertisementLifetimeValue of lifetime field of router advertisement sent from the interface. This value must be greater than or equal to agentIpv6RouterAdvertisementMaxAdvertisementInterval. | Integer32r/w Constraints: range: 4-65520 | .1.3.6.1.4.1.4526.10.30.1.3.1.4 | ||||
| agentIpv6RouterAdvertisementNbrSolicitIntervalValue of retrans time field of router advertisement sent from the interface. A value of 0 means this router does not specifiy the interval. | Integer32r/w Constraints: range: 0-3600000 | .1.3.6.1.4.1.4526.10.30.1.3.1.5 | ||||
| agentIpv6RouterAdvertisementReachableTimeValue of reachable time field of router advertisement sent from the interface. A value of 0 means this router does not specifiy the interval. | Integer32r/w Constraints: range: 0-3600000 | .1.3.6.1.4.1.4526.10.30.1.3.1.6 | ||||
| agentIpv6RouterAdvertisementManagedFlagValue of managed config field of router advertisement sent from the interface. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.4526.10.30.1.3.1.7 | ||||
| agentIpv6RouterAdvertisementOtherFlagValue of other config field of router advertisement sent from the interface. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.4526.10.30.1.3.1.8 | ||||
| agentIpv6RouterAdvertisementHopLimitUnspecifiedModeThis object configures the router to send Router Advertisements on an interface with unspecified (0) Current Hop Limit value. This will tell the hosts on that link to ignore the Hop Limit from this Router. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.4526.10.30.1.3.1.9 |
agentIpv6AddrPrefixTable
table.1.3.6.1.4.1.4526.10.30.1.4
·
1 row entry
·
6 columns
Uses the netgear variant from
Command help
/opt/observium/mibs/netgear.
Walk agentIpv6AddrPrefixTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-ROUTING6-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-ROUTING6-MIB::agentIpv6AddrPrefixTable'
The list of IPv6 address prefixes of IPv6 interfaces.
An interface entry containing objects of
a particular IPv6 address prefix.
a particular IPv6 address prefix.
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| agentIpv6AddrPrefixThe prefix associated with the this interface. | IPV6-TCIpv6AddressPrefix Type Constraints: range: 0..16 | .1.3.6.1.4.1.4526.10.30.1.4.1.1 | ||||
| agentIpv6AddrPrefixLengthThe length of the prefix (in bits). | bitsInteger32 Constraints: range: 0-128 | .1.3.6.1.4.1.4526.10.30.1.4.1.2 | ||||
| agentIpv6AddrPrefixOnLinkFlagThis object has the value 'true(1)', if this prefix can be used for on-link determination and the value 'false(2)' otherwise. | SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.4526.10.30.1.4.1.3 | ||||
| agentIpv6AddrPrefixAutonomousFlagAutonomous address configuration flag. When true(1), indicates that this prefix can be used for autonomous address configuration (i.e. can be used to form a local interface address). If false(2), it is not used to autoc… | SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.4526.10.30.1.4.1.4 | ||||
| agentIpv6AddrPrefixAdvPreferredLifetimeIt is the length of time in seconds that this prefix will remain preferred, i.e. time until deprecation. A value of 4,294,967,295 represents infinity. The address generated from a deprecated prefix shoul… | secondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.4526.10.30.1.4.1.5 | ||||
| agentIpv6AddrPrefixAdvValidLifetimeIt is the length of time in seconds that this prefix will remain valid, i.e. time until invalidation. A value of 4,294,967,295 represents infinity. The address generated from an invalidated prefix should… | secondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.4526.10.30.1.4.1.6 |
agentIpv6AddrTable
table.1.3.6.1.4.1.4526.10.30.1.5
·
1 row entry
·
4 columns
Uses the netgear variant from
Command help
/opt/observium/mibs/netgear.
Walk agentIpv6AddrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-ROUTING6-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-ROUTING6-MIB::agentIpv6AddrTable'
The table of addressing information relevant to this node's interface addresses.
The addressing information for one of this
node's interface addresses.
node's interface addresses.
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| agentIpv6AddrAddressThe IPv6 address to which this entry's addressing information pertains. | IPV6-TCIpv6Address Type Constraints: range: 16 | .1.3.6.1.4.1.4526.10.30.1.5.1.1 | ||||||||||||
| agentIpv6AddrPfxLengthThe length of the prefix (in bits) associated with the IPv6 address of this entry. | bitsInteger32r/w Constraints: range: 0-128 | .1.3.6.1.4.1.4526.10.30.1.5.1.2 | ||||||||||||
| agentIpv6AddrEui64FlagThis object has the value 'true(1)', if this address uses and eui-64 generated interface identifier and the value 'false(2)' otherwise. | SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.4526.10.30.1.5.1.3 | ||||||||||||
| agentIpv6AddrStatusCreates a new entry in the Address table. Allowed values are: createAndGo(4) - Creates an entry in this table, associating the address with a given interface. The agentIpv6NetMask … | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.4526.10.30.1.5.1.4 |
.1.3.6.1.4.1.4526.10.30.1.6
·
1 row entry
·
6 columns
Uses the netgear variant from
Command help
/opt/observium/mibs/netgear.
Walk agentIpv6StaticRouteTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-ROUTING6-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-ROUTING6-MIB::agentIpv6StaticRouteTable'
IPv6 Static Routing table. This table contains an entry for each valid IPv6 static unicast route that can be used for packet forwarding determination.
A routing entry.
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| agentIpv6StaticRouteDestThe destination IPv6 address of this route. This object may not take a Multicast address value. | IPV6-TCIpv6AddressPrefix Type Constraints: range: 0..16 | .1.3.6.1.4.1.4526.10.30.1.6.1.1 | ||||||||||||
| agentIpv6StaticRoutePfxLengthIndicates the prefix length of the destination address. | bitsInteger32 Constraints: range: 0-128 | .1.3.6.1.4.1.4526.10.30.1.6.1.2 | ||||||||||||
| agentIpv6StaticRouteIfIndexThe index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified… | IPV6-TCIpv6IfIndexOrZero Type Constraints: range: 0..2147483647 | .1.3.6.1.4.1.4526.10.30.1.6.1.3 | ||||||||||||
| agentIpv6StaticRouteNextHopThe address of the next system en route. | IPV6-TCIpv6Address Type Constraints: range: 16 | .1.3.6.1.4.1.4526.10.30.1.6.1.4 | ||||||||||||
| agentIpv6StaticRoutePreferenceThe routing preference metric for this route. A lower value is more preferred. | Integer32r/w Constraints: range: 1-255 | .1.3.6.1.4.1.4526.10.30.1.6.1.5 | ||||||||||||
| agentIpv6StaticRouteStatusCreates a new entry in the Address table. Allowed values are: createAndGo(4) - Creates an entry in this table. destroy(6) - Removes the associated route from the i… | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.4526.10.30.1.6.1.6 |
.1.3.6.1.4.1.4526.10.30.1.7.1
·
1 row entry
·
3 columns
Uses the netgear variant from
Command help
/opt/observium/mibs/netgear.
Walk agentIpv6ServicePortPrefixTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-ROUTING6-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-ROUTING6-MIB::agentIpv6ServicePortPrefixTable'
IPv6 Service Port Prefix Table. This table contains an entry for each valid IPv6 prefix configured on the Service Port.
An IPv6 Service Port Prefix entry.
Indexes
| Column | Syntax | OID |
|---|---|---|
| agentIpv6ServicePortPrefixIndexThe index of the Ipv6 Prefix Address configured on the Service Port. Removal of a row will cause index values to be reassigned. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.4526.10.30.1.7.1.1.1 |
| agentIpv6ServicePortPrefixThe Ipv6 Prefix Address configured on the Service Port. | IPV6-TCIpv6Address Type Constraints: range: 16 | .1.3.6.1.4.1.4526.10.30.1.7.1.1.2 |
| agentIpv6ServicePortPrefixLengthThe length of the IPv6 Prefix Address. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.4526.10.30.1.7.1.1.3 |
.1.3.6.1.4.1.4526.10.30.1.7.2
·
1 row entry
·
2 columns
Uses the netgear variant from
Command help
/opt/observium/mibs/netgear.
Walk agentIpv6ServicePortDefaultRouterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-ROUTING6-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-ROUTING6-MIB::agentIpv6ServicePortDefaultRouterTable'
IPv6 Service Port Default Router Table. This table contains an entry for each valid IPv6 Default Router configured on the Service Port.
An IPv6 Service Port Default Router entry.
| Column | Syntax | OID |
|---|---|---|
| agentIpv6ServicePortDefaultRouterIndexThe index of the IPv6 Default Router Address configured on the Service Port. Removal of a row will cause index values to be reassigned. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.4526.10.30.1.7.2.1.1 |
| agentIpv6ServicePortDefaultRouterThe Address of the IPv6 Default Router configured on the Service Port. | IPV6-TCIpv6Address Type Constraints: range: 16 | .1.3.6.1.4.1.4526.10.30.1.7.2.1.2 |
.1.3.6.1.4.1.4526.10.30.1.7.3
·
1 row entry
·
6 columns
Uses the netgear variant from
Command help
/opt/observium/mibs/netgear.
Walk agentIpv6ServicePortNbrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-ROUTING6-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-ROUTING6-MIB::agentIpv6ServicePortNbrTable'
IPv6 Service Port Neighbor Table. This table contains an entry for each valid IPv6 Neighbor configured on the Service Port.
An IPv6 Service Port Neighbor entry.
Indexes
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| agentIpv6ServicePortNbrAddrThe Ipv6 Address of a neighbor switch visible to the Service Port. | IPV6-TCIpv6Address Type Constraints: range: 16 | .1.3.6.1.4.1.4526.10.30.1.7.3.1.1 | ||||||||||
| agentIpv6ServicePortNbrPhysAddrThe MacAddress of the neighboring switch. | SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… | .1.3.6.1.4.1.4526.10.30.1.7.3.1.2 | ||||||||||
| agentIpv6ServicePortNbrStateThe state of the neighboring switch: reachable(1) - The neighbor is reachable by this switch. stale(2) - Information about the neighbor is scheduled for deletion. delay(3) - No information has been received from… | Enumeration Enumerated Values:
| .1.3.6.1.4.1.4526.10.30.1.7.3.1.3 | ||||||||||
| agentIpv6ServicePortNbrUpdatedThe last sysUpTime that this neighbor has been updated. | SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t… | .1.3.6.1.4.1.4526.10.30.1.7.3.1.4 | ||||||||||
| agentIpv6ServicePortNbrIsRouterReturns true(1) if the neighbor machine is a router, false(2) otherwise. | SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.4526.10.30.1.7.3.1.5 | ||||||||||
| agentIpv6ServicePortNbrTypeThe type of the mapping. The 'dynamic(2)' type indicates that the IPv6 address to physical addresses mapping has been dynamically resolved using the IPv6 Neighbor Discovery protocol. The static(3)' types indicates that … | Enumeration Enumerated Values:
| .1.3.6.1.4.1.4526.10.30.1.7.3.1.6 |
.1.3.6.1.4.1.4526.10.30.1.7.4
·
1 row entry
·
3 columns
Uses the netgear variant from
Command help
/opt/observium/mibs/netgear.
Walk agentIpv6ServicePortNbrCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-ROUTING6-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-ROUTING6-MIB::agentIpv6ServicePortNbrCfgTable'
The table contains an entry for each static IPv6 Neighbor on the Service Port.
An entry of the static IPv6 Neighbor on the Service Port.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| agentIpv6ServicePortNbrCfgAddrThe Ipv6 Address of a static neighbor on the Service Port. | IPV6-TCIpv6Address Type Constraints: range: 16 | .1.3.6.1.4.1.4526.10.30.1.7.4.1.1 | ||||||||||||
| agentIpv6ServicePortNbrCfgPhysAddrThe MAC Address of a static neighbor on the Service Port. | SNMPv2-TCMacAddressr/w Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… | .1.3.6.1.4.1.4526.10.30.1.7.4.1.2 | ||||||||||||
| agentIpv6ServicePortNbrCfgEntryStatusCreate or delete the static neighbor entry on the Service Port. The configured static neighbor entry is always active. | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.4526.10.30.1.7.4.1.3 |
.1.3.6.1.4.1.4526.10.30.1.9
·
1 row entry
·
12 columns
Uses the netgear variant from
Command help
/opt/observium/mibs/netgear.
Walk agentDhcp6ClientParametersTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-ROUTING6-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-ROUTING6-MIB::agentDhcp6ClientParametersTable'
Information about the DHCPv6 Client parameters on the interfaces.
DHCPv6 Client information on an interface.
Indexes
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| agentDhcp6ClientInterfaceIndexThe Interface index on which the IPv6 address is leased by the DHCPv6 Server. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.4526.10.30.1.9.1.1 | ||||||||||||||
| agentDhcp6ClientPrefixThe IPv6 Prefix leased by the DHCPv6 Server. | IPV6-TCIpv6AddressPrefix Type Constraints: range: 0..16 | .1.3.6.1.4.1.4526.10.30.1.9.1.2 | ||||||||||||||
| agentDhcp6ClientPrefixlengthThe Prefix length corresponding to the IPv6 Prefix leased by the DHCPv6 Server. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.4526.10.30.1.9.1.3 | ||||||||||||||
| agentDhcp6ClientStateThe State of the DHCPv6 Client on this interface. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.4526.10.30.1.9.1.4 | ||||||||||||||
| agentDhcp6ClientServerDUIDThe DHCPv6 Unique Identifier of the DHCPv6 Server on this interface. | OctetString Constraints: range: 1-255 | .1.3.6.1.4.1.4526.10.30.1.9.1.5 | ||||||||||||||
| agentDhcp6ClientT1TimeThe T1 (in seconds) time as indicated by the DHCPv6 Server. T1 value indicates the time interval after which the address is requested for renewal. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.4526.10.30.1.9.1.6 | ||||||||||||||
| agentDhcp6ClientT2TimeThe T2 (in seconds) time as indicated by the DHCPv6 Server. T2 value indicates the time interval after which the Client sends Rebind message to the Server incase there are no replies to the Renew messages. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.4526.10.30.1.9.1.7 | ||||||||||||||
| agentDhcp6ClientIAIDAn identifier for an identity association chosen by this Client. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.4526.10.30.1.9.1.8 | ||||||||||||||
| agentDhcp6ClientPreferredLifeTimeThe time (in seconds) that the IPv6 address is leased by the DHCPv6 Server. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.4526.10.30.1.9.1.9 | ||||||||||||||
| agentDhcp6ClientValidLifeTimeThe time (in seconds) that the IPv6 address is leased by the DHCPv6 Server. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.4526.10.30.1.9.1.10 | ||||||||||||||
| agentDhcp6ClientRenewTimeThe time (in seconds) remaining to send a DHCPv6 Renew request to DHCPv6 Server for the leased address. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.4526.10.30.1.9.1.11 | ||||||||||||||
| agentDhcp6ClientExpireTimeThe time (in seconds) when the DHCPv6 leased address expires. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.4526.10.30.1.9.1.12 |
agentIpv6EcmpCountTable
table.1.3.6.1.4.1.4526.10.30.1.11
·
1 row entry
·
2 columns
Uses the netgear variant from
Command help
/opt/observium/mibs/netgear.
Walk agentIpv6EcmpCountTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-ROUTING6-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-ROUTING6-MIB::agentIpv6EcmpCountTable'
A count of the number of routes with each number of ECMP next hops. A walk of this table only returns the entries with a non-zero value for agentIpv6EcmpRouteCount.
Number of IPv6 routes with a given number of next hops.
Indexes
| Column | Syntax | OID |
|---|---|---|
| agentIpv6EcmpNextHopCountThe number of next hops in a route. From 0 to the maximum number of next hops in an ECMP route. The maximum varies by platform. | Unsigned32 Constraints: range: 0-128 | .1.3.6.1.4.1.4526.10.30.1.11.1.1 |
| agentIpv6EcmpRouteCountThe number of IPv6 routes with agentIpv6EcmpNextHopCount next hops. | SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.4526.10.30.1.11.1.2 |
.1.3.6.1.4.1.4526.10.30.1.12.1
·
1 row entry
·
6 columns
Uses the netgear variant from
Command help
/opt/observium/mibs/netgear.
Walk agentIpv6NetworkPortNbrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-ROUTING6-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-ROUTING6-MIB::agentIpv6NetworkPortNbrTable'
IPv6 Network Port Neighbor Table. This table contains an entry for each valid IPv6 Neighbor configured on the Network Port.
An IPv6 Network Port Neighbor entry.
Indexes
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| agentIpv6NetworkPortNbrAddrThe Ipv6 Address of a neighbor switch visible to the Network Port. | IPV6-TCIpv6Address Type Constraints: range: 16 | .1.3.6.1.4.1.4526.10.30.1.12.1.1.1 | ||||||||||
| agentIpv6NetworkPortNbrPhysAddrThe MacAddress of the neighboring switch. | SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… | .1.3.6.1.4.1.4526.10.30.1.12.1.1.2 | ||||||||||
| agentIpv6NetworkPortNbrStateThe state of the neighboring switch: reachable(1) - The neighbor is reachable by this switch. stale(2) - Information about the neighbor is scheduled for deletion. delay(3) - No information has been received from… | Enumeration Enumerated Values:
| .1.3.6.1.4.1.4526.10.30.1.12.1.1.3 | ||||||||||
| agentIpv6NetworkPortNbrUpdatedThe last sysUpTime that this neighbor has been updated. | SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t… | .1.3.6.1.4.1.4526.10.30.1.12.1.1.4 | ||||||||||
| agentIpv6NetworkPortNbrIsRouterReturns true(1) if the neighbor machine is a router, false(2) otherwise. | SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.4526.10.30.1.12.1.1.5 | ||||||||||
| agentIpv6NetworkPortNbrTypeThe type of the mapping. The 'dynamic(2)' type indicates that the IPv6 address to physical addresses mapping has been dynamically resolved using the IPv6 Neighbor Discovery protocol. The static(3)' types indicates that … | Enumeration Enumerated Values:
| .1.3.6.1.4.1.4526.10.30.1.12.1.1.6 |
.1.3.6.1.4.1.4526.10.30.1.12.2
·
1 row entry
·
3 columns
Uses the netgear variant from
Command help
/opt/observium/mibs/netgear.
Walk agentIpv6NetworkPortNbrCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-ROUTING6-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-ROUTING6-MIB::agentIpv6NetworkPortNbrCfgTable'
The table contains an entry for each static IPv6 Neighbor on the Network Port.
An entry of the static IPv6 Neighbor on the Network Port.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| agentIpv6NetworkPortNbrCfgAddrThe Ipv6 Address of a static neighbor on the Network Port. | IPV6-TCIpv6Address Type Constraints: range: 16 | .1.3.6.1.4.1.4526.10.30.1.12.2.1.1 | ||||||||||||
| agentIpv6NetworkPortNbrCfgPhysAddrThe MAC Address of a static neighbor on the Network Port. | SNMPv2-TCMacAddressr/w Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… | .1.3.6.1.4.1.4526.10.30.1.12.2.1.2 | ||||||||||||
| agentIpv6NetworkPortNbrCfgEntryStatusCreate or delete the static neighbor entry on the Network Port. The configured static neighbor entry is always active. | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.4526.10.30.1.12.2.1.3 |
agentIpv6NbrCfgTable
table.1.3.6.1.4.1.4526.10.30.1.13
·
1 row entry
·
4 columns
Uses the netgear variant from
Command help
/opt/observium/mibs/netgear.
Walk agentIpv6NbrCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-ROUTING6-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-ROUTING6-MIB::agentIpv6NbrCfgTable'
The table contains an entry for each static IPv6 Neighbor on the Network Port.
An entry of the static IPv6 Neighbor on the Network Port.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| agentIpv6IfIndexA unique non-zero value identifying the particular IPv6 interface. | IPV6-TCIpv6IfIndex Type Constraints: range: 1..2147483647 | .1.3.6.1.4.1.4526.10.30.1.13.1.1 | ||||||||||||
| agentIpv6NbrCfgAddrThe Ipv6 Address of a static neighbor on the Routing or Host interface. | IPV6-TCIpv6Address Type Constraints: range: 16 | .1.3.6.1.4.1.4526.10.30.1.13.1.2 | ||||||||||||
| agentIpv6NbrCfgPhysAddrThe MAC Address of a static neighbor on the Routing or Host interface. | SNMPv2-TCMacAddressr/w Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… | .1.3.6.1.4.1.4526.10.30.1.13.1.3 | ||||||||||||
| agentIpv6NbrCfgEntryStatusCreate or delete the static neighbor entry on the Routing or Host interface. The configured static neighbor entry is always active. | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.4526.10.30.1.13.1.4 |