NETGEAR-RADLAN-VRRP Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

rlVrrpv3OperationsTable

table

.1.3.6.1.4.1.4526.17.26.26.1 · 1 row entry · 9 columns

Open in standard view

Uses the netgear variant from /opt/observium/mibs/netgear.

Command help

Walk rlVrrpv3OperationsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-VRRP' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-VRRP::rlVrrpv3OperationsTable'

This table is parallel to vrrpv3OperationsTable, and is used
to change VRRP on interface working version, description and
display several statuses.
It contains private objects.

rlVrrpv3OperationsEntry row .1.3.6.1.4.1.4526.17.26.26.1.1

An operation entry mapping for a particular interface.

Indexes

No indexes recorded

Column Syntax OID

rlVrrpv3OperationsDefaultPrimaryIpAddr

In the case where there are more than one IP
Address (associated IP addresses) for a given
`ifIndex', this object is used to specify the IP
address that will become the
vrrpv3OperationsMasterIpAddr', should the virtual
…

INET-ADDRESS-MIBInetAddress

Type Constraints:
range: 0..255

.1.3.6.1.4.1.4526.17.26.26.1.1.1

rlVrrpv3OperationsPrimaryIpAddrState

This object represents enabled/disabled state of user configured
primary address of the virtual router.

Enumeration

Enumerated Values:

1	up
2	down

.1.3.6.1.4.1.4526.17.26.26.1.1.2

rlVrrpv3OperationsVrDescription

The description of the VRRP virtual router.

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.4526.17.26.26.1.1.3

rlVrrpv3OperationsAdminState

This object will enable/disable the virtual router
function. Setting the value to `up', will transition
the state of the virtual router from `initialize' to `backup'
or `master', depending on the value of `vrrpOperPrior…

Enumerationr/w

Enumerated Values:

1	up
2	down

.1.3.6.1.4.1.4526.17.26.26.1.1.4

rlVrrpv3OperationsVrrpVersion

Current VRRP virtual router version it is working with.

Enumerationr/w

Enumerated Values:

1	version2and3
2	version2
3	version3

.1.3.6.1.4.1.4526.17.26.26.1.1.5

rlVrrpv3OperationsMasterPriority

This object specifies the priority which is used by master router.

Unsigned32

Constraints:
range: 1-255

.1.3.6.1.4.1.4526.17.26.26.1.1.6

rlVrrpv3OperationsMasterAdvInterval

The time interval, in centiseconds, which is used by master router
for sending advertisement messages.

centisecondsInteger32

Constraints:
range: 1-4095

.1.3.6.1.4.1.4526.17.26.26.1.1.7

rlVrrpv3OperationsMasterDownInterval

Time interval for Backup to declare Master down (centiseconds).

centisecondsSNMPv2-TCTimeInterval

Type Constraints:
range: 0..2147483647

Description:

A period of time, measured in units of 0.01 seconds.

.1.3.6.1.4.1.4526.17.26.26.1.1.8

rlVrrpv3OperationsSkewTime

Time to skew Master_Down_Interval in milliseconds.

centisecondsSNMPv2-TCTimeInterval

Type Constraints:
range: 0..2147483647

Description:

A period of time, measured in units of 0.01 seconds.

.1.3.6.1.4.1.4526.17.26.26.1.1.9

rlVrrpv3AssociatedIpAddrTable

table

.1.3.6.1.4.1.4526.17.26.26.2 · 1 row entry · 1 columns

Open in standard view

Uses the netgear variant from /opt/observium/mibs/netgear.

Command help

Walk rlVrrpv3AssociatedIpAddrTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-VRRP' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-VRRP::rlVrrpv3AssociatedIpAddrTable'

This table is parallel to vrrpv3AssociatedIpAddrTable, and is used
to display address statuses.
It contains private objects.

rlVrrpv3AssociatedIpAddrEntry row .1.3.6.1.4.1.4526.17.26.26.2.1

An entry in the table contains an IP address that is
associated with a virtual router

Indexes

No indexes recorded

Column Syntax OID

rlVrrpv3AssociatedIpAddrState

This object represents state of the assosiated IP address,
backed up by current virtual router.

Enumeration

Enumerated Values:

1	up
2	down

.1.3.6.1.4.1.4526.17.26.26.2.1.1

rlVrrpv3CountersTable

table

.1.3.6.1.4.1.4526.17.26.26.3 · 1 row entry · 11 columns

Open in standard view

Uses the netgear variant from /opt/observium/mibs/netgear.

Command help

Walk rlVrrpv3CountersTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-VRRP' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-VRRP::rlVrrpv3CountersTable'

Table of virtual router statistics.

rlVrrpv3CountersEntry row .1.3.6.1.4.1.4526.17.26.26.3.1

An entry in the table, containing statistics
information about a given virtual router.

Indexes

rlVrrpv3CountersIfIndex

Column Syntax OID

rlVrrpv3CountersIfIndex

Interface index

IF-MIBInterfaceIndexOrZero

Type Constraints:
range: 0..2147483647

Description:

This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…

.1.3.6.1.4.1.4526.17.26.26.3.1.1

rlVrrpv3CountersChecksumErrors

The total number of checksum errors received on
this interface.

Counter is only valid as long as there is a VRRP router defined on
this interface.

SNMPv2-SMICounter32