NETGEAR-RADLAN-TRUNK-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
4
Rows
4
Columns
23
rlDot3adAggBalanceTable
table.1.3.6.1.4.1.4526.17.65.2
·
1 row entry
·
4 columns
Uses the netgear variant from
Command help
/opt/observium/mibs/netgear.
Walk rlDot3adAggBalanceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-TRUNK-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-TRUNK-MIB::rlDot3adAggBalanceTable'
An entry of this table specifies a balancing criterion used
for the corresponding dot3adAggIndex.
A criterion configured in this table is used to distribute
the traffic both over Link Aggregation Group members and
multiple ECMP paths.
A list of information for each dot3adAggIndex.
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| rlDot3adAggBalanceForwardTypeA Forwarding type: Bridging or Routing. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.4526.17.65.2.1.1 | ||||||||||||
| rlDot3adAggBalanceLayerA Network Layer Number, may have the following values: 2, 3 or 4. The default value is: Bridging: 2 Routing: 3. | Integer32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.4526.17.65.2.1.2 | ||||||||||||
| rlDot3adAggBalanceUsedAddressesSpecifies the Network Layer addresses used for Balancing of unicast frames. The function sets the criterion (by layer and used address in it). | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.4526.17.65.2.1.3 | ||||||||||||
| rlDot3adAggBalanceBroadcastTypeSpecifies a balancing criterion used for L2 broadcast and unknown frames: common: a link allocated for broadcast and unknown frames is used for unicast frames too dedicated: a link allocated f… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.4526.17.65.2.1.4 |
rlDot3adAggCreationTable
table.1.3.6.1.4.1.4526.17.65.6
·
1 row entry
·
2 columns
Uses the netgear variant from
Command help
/opt/observium/mibs/netgear.
Walk rlDot3adAggCreationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-TRUNK-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-TRUNK-MIB::rlDot3adAggCreationTable'
An entry of this table is for creation of an aggregator for the corresponding dot3adAggIndex, when the value of the rlDot3adAggCreationSupport is diffrent from notSupported.
An information for each dot3adAggIndex.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| rlDot3adAggCreationTrunkThe aggregator can aggregate ports in manual configuration. | SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.4526.17.65.6.1.1 | ||||
| rlDot3adAggCreationLacpThe aggregator can aggregate ports by lacp. | SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.4526.17.65.6.1.2 |
rlDot3adAggPortLacpTable
table.1.3.6.1.4.1.4526.17.65.8
·
1 row entry
·
12 columns
Uses the netgear variant from
Command help
/opt/observium/mibs/netgear.
Walk rlDot3adAggPortLacpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-TRUNK-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-TRUNK-MIB::rlDot3adAggPortLacpTable'
An entry of this table specifies lacp protocol state and statistics for the corresponding dot3adAggPortIndex.
A list of information for each dot3adAggPortIndex.
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| rlDot3adAggPortLacpPdusRxThe number of valid LACPDUs received on this Aggregation Port. This value is read-only. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.4526.17.65.8.1.1 | ||||||||||||
| rlDot3adAggPortLacpPDUsTxThe number of LACPDUs transmitted on this Aggregation Port. This value is read-only. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.4526.17.65.8.1.2 | ||||||||||||
| rlDot3adAggPortLacpRxStateThis attribute holds the value 'current' if the Receive state machine for the Aggregation Port is in the CURRENT state, 'expired' if the Receive state machine is in the EXPIRED state, 'defaulted' if the Receive state ma… | Enumeration Enumerated Values:
| .1.3.6.1.4.1.4526.17.65.8.1.3 | ||||||||||||
| rlDot3adAggPortLacpMuxStateThis attribute holds the value 'detached' if the Mux state machine for the Aggregation Port is in the DETACHED state, 'waiting' if the Mux state machine is in the WAITING state, 'attached' if the Mux state machine for t… | Enumeration Enumerated Values:
| .1.3.6.1.4.1.4526.17.65.8.1.4 | ||||||||||||
| rlDot3adAggPortLacpPeriodicStateThis attribute holds the value 'noPeriodic' if the Periodic state machine for the Aggregation Port is in the NO_PERIODIC state, 'fastPeriodic' if the Mux state machine is in the FAST_PERIODIC state, 'slowPeriodic' if th… | Enumeration Enumerated Values:
| .1.3.6.1.4.1.4526.17.65.8.1.5 | ||||||||||||
| rlDot3adAggPortLacpSelectedThis attribute holds the value 'unselected' if the Selected variable for the Aggregation Port is set to UNSELECTED, 'selected' if the Selected variable for the Aggregation Port is set to SELECTED, or 'waiting' if the Se… | Enumeration Enumerated Values:
| .1.3.6.1.4.1.4526.17.65.8.1.6 | ||||||||||||
| rlDot3adAggPortLacpReadyA read-only Boolean value indicating whether the Aggregation Port is in the WAITING state in the Mux state machine and its wait_while_timer has expired ('TRUE'). otherwise, its valus is 'FALSE'. | SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.4526.17.65.8.1.7 | ||||||||||||
| rlDot3adAggPortLacpPortMovedA read-only Boolean value indicating whether the Partner_Oper_System or Partner_Oper_Port_Number in use by the Aggregation Port has been changed in an incoming LACPDU ('TRUE'). otherwise, its valus is 'FALSE'. | SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.4526.17.65.8.1.8 | ||||||||||||
| rlDot3adAggPortLacpNNTA read-only Boolean value indicating whether there is a new protocol information that should be transmitted on the link, or that the Partner needs to be reminded of the old information. otherwise, its valus is 'FALSE'. | SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.4526.17.65.8.1.9 | ||||||||||||
| rlDot3adAggPortLacpPeriodicTxTimerThe amount of time in seconds remaining before the Periodeic Tx timer will expire. This value is read-only. | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.4526.17.65.8.1.10 | ||||||||||||
| rlDot3adAggPortLacpCurrentWhileTimerThe amount of time in seconds remaining before the Current While timer will expire. This value is read-only. | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.4526.17.65.8.1.11 | ||||||||||||
| rlDot3adAggPortLacpWaitWhileTimerThe amount of time in seconds remaining before the Wait While timer will expire. This value is read-only. | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.4526.17.65.8.1.12 |
.1.3.6.1.4.1.4526.17.65.10
·
1 row entry
·
5 columns
Uses the netgear variant from
Command help
/opt/observium/mibs/netgear.
Walk rlDot3adAggLacpMembershipRestrictionsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-TRUNK-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-TRUNK-MIB::rlDot3adAggLacpMembershipRestrictionsTable'
An entry of this table specifies membership restrictions for ports that lacp is enbaled on them, and try to attach to the corresponding dot3adAggIndex.
A list of information for each dot3adAggIndex.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| rlDot3adAggLacpMembershipRestrictionsPartnerAdminKeyThis variable specifies the administrative key of the remote LACP aggregator. A value of 0 is returned if the value of the variable hasn't been set. | Unsigned32r/w Constraints: range: 0-65535 | .1.3.6.1.4.1.4526.17.65.10.1.1 | ||||
| rlDot3adAggLacpMembershipRestrictionsSpeedAdminModeThis variable specifies the required speed of the LACP aggregator in bits per second. A value of 10 is returned for 10G. A value of 0 is returned if the value of the variable hasn't been set. | SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.4526.17.65.10.1.2 | ||||
| rlDot3adAggLacpMembershipRestrictionsPartnerAdminSystemIdThis variable specifies the administrative MAC Address of the remote LACP aggregator. A null mac address is returned if the value of the variable hasn't been set. | SNMPv2-TCPhysAddressr/w Description: Represents media- or physical-level addresses. | .1.3.6.1.4.1.4526.17.65.10.1.3 | ||||
| rlDot3adAggLacpMembershipRestrictionsPartnerAdminSystemPriorityThis variable specifies the administrative System Priority of the remote LACP aggregator. A value of 0 is returned if the value of the variable hasn't been set. | Unsigned32r/w Constraints: range: 0-65535 | .1.3.6.1.4.1.4526.17.65.10.1.4 | ||||
| rlDot3adAggLacpMembershipRestrictionsIndividualAggregatorThis variable specifies if the lacp aggregator represents an Aggregate ('FALSE') or an Individual link ('TRUE'). | SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.4526.17.65.10.1.5 |