NETGEAR-RADLAN-QOS-CLI-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

258

rlQosOffsetTable

table

.1.3.6.1.4.1.4526.17.88.4 · 1 row entry · 7 columns

Open in standard view

Uses the netgear variant from /opt/observium/mibs/netgear.

Command help

Walk rlQosOffsetTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-QOS-CLI-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-QOS-CLI-MIB::rlQosOffsetTable'

This table specifies Offset Table information

rlQosOffsetEntry row .1.3.6.1.4.1.4526.17.88.4.1

Each entry in this table describes one classifier field.
The information includes: Offset Type the offset the mask and the
Pattern.
if the type is vlan then the value will be the vlan tag.
if the Type is in/out port it …

Indexes

rlQosOffsetIndex

Column Syntax OID

rlQosOffsetIndex

An arbitrary incremental Index
for the offset table.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.4.1.1

rlQosOffsetType

Start of the offset.

ClassOffsetTyper/w

Type Values:

1	packetStart
2	layer2-start
3	mpls-start
4	layer3-start
5	layer4-start
6	layer5-start
7	vlan
8	in-port
9	out-port
10	vpt
11	ethertype
12	inner-vlan
13	layer3-ipv6-start
14	layer4-ipv6-start
15	src-mac
16	dst-mac

.1.3.6.1.4.1.4526.17.88.4.1.2

rlQosOffsetValue

The Offset value.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.4.1.3

rlQosOffsetMask

Define which bit to be extracted from the offset.
This field is a wildcard, i.e. 0 - significant bit, 1 - not significant.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.4526.17.88.4.1.4

rlQosOffsetPattern

The value to match too.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.4526.17.88.4.1.5

rlQosOffsetTuplePointer

Pointer for the relevant Tuple.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.4.1.6

rlQosOffsetStatus

The status of a table entry.
It is used to delete/Add an entry from this table.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …

.1.3.6.1.4.1.4526.17.88.4.1.7

rlQosTupleTable

table

.1.3.6.1.4.1.4526.17.88.5 · 1 row entry · 5 columns

Open in standard view

Uses the netgear variant from /opt/observium/mibs/netgear.

Command help

Walk rlQosTupleTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-QOS-CLI-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-QOS-CLI-MIB::rlQosTupleTable'

This table specifies Tuple Table information

rlQosTupleEntry row .1.3.6.1.4.1.4526.17.88.5.1

Each entry in this table describes one Tuple.
The information includes: Tuple Type and the Tuples values.
The index is sequential integer represent by rlQosTupleIndex

Indexes

rlQosTupleIndex

Column Syntax OID

rlQosTupleIndex

An arbitrary incremental Index
for the offset table.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.5.1.1

rlQosTupleType

Start of the offset.

ClassTupleTyper/w

Type Values:

1	protocol
2	ip-src
3	ip-dest
4	dscp
5	ip-precedence
6	udp-port-src
7	udp-port-dest
8	tcp-port-src
9	tcp-port-dest
10	mac-src
11	mac-dest
12	vlan
13	in-port
14	out-port
15	general
16	vpt
17	ether-type
18	tcp-flags
19	icmp-type
20	icmp-code
21	igmp-type
22	inner-vlan
23	ipv6-src
24	ipv6-dest
25	udp-port-range-start-src
26	udp-port-range-end-src
27	udp-port-range-start-dest
28	udp-port-range-end-dest
29	tcp-port-range-start-src
30	tcp-port-range-end-src
31	tcp-port-range-start-dest
32	tcp-port-range-end-dest

.1.3.6.1.4.1.4526.17.88.5.1.2

rlQosTupleValue1

The Tuple no.1 value can be regular integer
values only.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.5.1.3

rlQosTupleValue2

The Tuple no.2 value can be IPv4/IPv6/MAC address
or protocol number with mask

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.4526.17.88.5.1.4

rlQosTupleStatus

The status of a table entry.
It is used to delete/Add an entry from this table.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.4526.17.88.5.1.5

rlQosAceTable

table

.1.3.6.1.4.1.4526.17.88.6 · 1 row entry · 13 columns

Open in standard view

Uses the netgear variant from /opt/observium/mibs/netgear.

Command help

Walk rlQosAceTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-QOS-CLI-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-QOS-CLI-MIB::rlQosAceTable'

This table specifies ACE table information

rlQosAceEntry row .1.3.6.1.4.1.4526.17.88.6.1

Each entry in this table describes one Classifier Element.
The information includes: Action the ACE's Type the up to 8 tuples
pointers. The index is sequential integer represent by rlQosAceIndex

Indexes

rlQosAceIndex

Column Syntax OID

rlQosAceIndex

An arbitrary incremental Index
for the ACE table.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.6.1.1

rlQosAceAction

ACE Action to take.

AceActionTyper/w

Type Values:

1	permit
2	deny
3	deny-DisablePort
4	deny-LogInput
5	permit-LogInput

.1.3.6.1.4.1.4526.17.88.6.1.2

rlQosAceType

ACE Type

AceObjectTyper/w

Type Values:

1	ip
2	ip-TCP
3	ip-UDP
4	ip-Offset
5	mac
6	mac-Offset
7	ip-ICMP
8	ip-IGMP
9	ipv6
10	ipv6-TCP
11	ipv6-UDP
12	ipv6-Offset
13	ipv6-ICMP

.1.3.6.1.4.1.4526.17.88.6.1.3

rlQosAceTuple1

ACE Tuple 1 pointer.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.6.1.4

rlQosAceTuple2

ACE Tuple 1 pointer.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.6.1.5

rlQosAceTuple3

ACE Tuple 1 pointer.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.6.1.6

rlQosAceTuple4

ACE Tuple 1 pointer.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.6.1.7

rlQosAceTuple5

ACE Tuple 1 pointer.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.6.1.8

rlQosAceTuple6

ACE Tuple 1 pointer.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.6.1.9

rlQosAceTuple7

ACE Tuple 1 pointer.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.6.1.10

rlQosAceTuple8

ACE Tuple 1 pointer.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.6.1.11

rlQosAceAccount

ACE Accounting state.
When set to 'enabled' than appropriate statistic's
counter is provided for an ACE.

BinaryStatusr/w

Type Values:

1	disable
2	enable

.1.3.6.1.4.1.4526.17.88.6.1.12

rlQosAceStatus

The status of a table entry.
It is used to delete/Add an entry from this table.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.4526.17.88.6.1.13

rlQosAclTable

table

.1.3.6.1.4.1.4526.17.88.7 · 1 row entry · 5 columns

Open in standard view

Uses the netgear variant from /opt/observium/mibs/netgear.

Command help

Walk rlQosAclTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-QOS-CLI-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-QOS-CLI-MIB::rlQosAclTable'

This table specifies ACL table information

rlQosAclEntry row .1.3.6.1.4.1.4526.17.88.7.1

Each entry in this table describes one Classifier Element.
The information includes: Action and the row status. The ACE pointer
are in the ACL-ACE reference table.
The index is sequential integer represent by rlQosAceIn…

Indexes

rlQosAclIndex

Column Syntax OID

rlQosAclIndex

An arbitrary incremental Index
for the ACE table.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.7.1.1

rlQosAclName

Name ACL.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.4526.17.88.7.1.2

rlQosAclType

ACL Type.

AclObjectTyper/w

Type Values:

1	mac
2	ip
3	ipv6

.1.3.6.1.4.1.4526.17.88.7.1.3

rlQosAclStatus

The status of a table entry.
It is used to delete/Add an entry from this table.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.4526.17.88.7.1.4

rlQosAclNumOfAces

Holds number of aces in the acl.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.7.1.5

rlQosAclAceRefTable

table

.1.3.6.1.4.1.4526.17.88.8 · 1 row entry · 3 columns

Open in standard view

Uses the netgear variant from /opt/observium/mibs/netgear.

Command help

Walk rlQosAclAceRefTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-QOS-CLI-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-QOS-CLI-MIB::rlQosAclAceRefTable'

This table specifies the ACE to ACL
relationship.

rlQosAclAceRefEntry row .1.3.6.1.4.1.4526.17.88.8.1

Each entry in this table describes the relationship
between ACE to ACL. Show which ACE include in one ACL.
The index is the ACE pointer represent
by rlQosAclAceRefAcePointer

Indexes

rlQosAclAceRefAcePointer

Column Syntax OID

rlQosAclAceRefAcePointer

The Index is the ACE pointer

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.8.1.1

rlQosAclAceRefAclPointer

ACL index Pointer

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.8.1.2

rlQosAclAceRefStatus

The status of a table entry.
It is used to delete/Add an entry from this table.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.4526.17.88.8.1.3

rlQosClassMapTable

table

.1.3.6.1.4.1.4526.17.88.9 · 1 row entry · 17 columns

Open in standard view

Uses the netgear variant from /opt/observium/mibs/netgear.

Command help

Walk rlQosClassMapTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-QOS-CLI-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-QOS-CLI-MIB::rlQosClassMapTable'

This table specifies CCL table information

rlQosClassMapEntry row .1.3.6.1.4.1.4526.17.88.9.1

Each entry in this table describes one Class Map Element.
The information includes: Classes Name,Class Action,
Policer pointer, and 1 match statements.
The index is sequential integer represent by rlQosClassMapIndex

Indexes

rlQosClassMapIndex

Column Syntax OID

rlQosClassMapIndex

Class Map Index

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.9.1.1

rlQosClassMapName

Name of the Class Map.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.4526.17.88.9.1.2

rlQosClassMapType

Class map type

ClassMapTyper/w

Type Values:

1	matchAll
2	matchAny

.1.3.6.1.4.1.4526.17.88.9.1.3

rlQosClassMapAction

Class Map Action.

ClassMapActionr/w

Type Values:

1	none
2	setIP-Precedence
3	setDSCP
4	setQueue
5	setCos
6	trust

.1.3.6.1.4.1.4526.17.88.9.1.4

rlQosClassMapMarkValue

Mark value when mark action has been chosen in
Class Map Action field.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.9.1.5

rlQosClassMapPolicer

Policer pointer. 0-means no policer.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.9.1.6

rlQosClassMapMatch1

Match ACL 1 pointer.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.9.1.7

rlQosClassMapMatch2

Match ACL 2 pointer.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.9.1.8

rlQosClassMapMarkVlan

If 'mark', than the classified
traffic will be remarked with new VLAN id.
If 'disabled' VLAN id is not changed.
If markNestedVlan, if the egress interface defined as
VLAN tagged member then a new VLAN tag is added to t…

MarkVlanActionr/w

Type Values:

1	noMark
2	mark
3	markNestedVlan

.1.3.6.1.4.1.4526.17.88.9.1.9

rlQosClassMapNewVlan

If rlQosClassMapMarkVlan is not 'noMark',
than the classified traffic will be
remarked with new VLAN id.
The value of this field sets new VLAN id.

Integer32r/w

Constraints:
range: 0-4095

.1.3.6.1.4.1.4526.17.88.9.1.10

rlQosClassMapRedirectAction

Specifiy the redirection action.

RedirectActionr/w

Type Values:

1	disabled
2	trap
3	redirectToInterface
4	redirectToAllPorts
5	mirror
6	analyzerPort
7	loopback
8	redirectToPortGroup
9	mirrorAndRedirectToInterface
10	mirrorAndRedirectToInterfacesGroup

.1.3.6.1.4.1.4526.17.88.9.1.11

rlQosClassMapDestInterface

Relevant if rlQosClassMapRedirect is either
'redirectToInterface' or 'analyzerPort' or 'toMultipleInterfaces'.
Specified the output interface the packet is redireted to or
the port that gets copy of the packet in additi…

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.9.1.12

rlQosClassMapStatus

The status of a table entry.
It is used to delete/Add an entry from this table.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.4526.17.88.9.1.13

rlQosClassMapMatch3

Match ACL 3 pointer.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.9.1.14

rlQosClassMapTrapId

If now zero, Indicates the trap type id the matched packets arrives with,
relevant when RedirectAction is trap or mirror.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.9.1.15

rlQosClassMapCounterEnable

Enable/disable counting per class map.
Counts packets matche the class map rules.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.4526.17.88.9.1.16

rlQosClassMapTunnelIdx

If not zero, then the tunnel data pointed by rlQosClassMapTunnelIdx
is added to the packet

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.4526.17.88.9.1.17

rlQosPolicerTable

table

.1.3.6.1.4.1.4526.17.88.10 · 1 row entry · 11 columns

Open in standard view

Uses the netgear variant from /opt/observium/mibs/netgear.

Command help

Walk rlQosPolicerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-QOS-CLI-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-QOS-CLI-MIB::rlQosPolicerTable'

This table specifies All the Policers in the system Information

rlQosPolicerEntry row .1.3.6.1.4.1.4526.17.88.10.1

Each entry in this table describes one policer.
The information includes: Policer name, Policer type, Committed Rate,
Committed Burst, Out-of-Profile Action.
The index is sequential integer represent by rlQosPolicerIndex

Indexes

rlQosPolicerIndex

Column Syntax OID

rlQosPolicerIndex

Policer Index.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.10.1.1

rlQosPolicerName

Name of the Policer.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.4526.17.88.10.1.2

rlQosPolicerType

Policer type

PolicerTyper/w

Type Values:

1	single
2	aggregate
3	cascade

.1.3.6.1.4.1.4526.17.88.10.1.3

rlQosPolicerCir

Committed rate value.

kbpsSNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.4526.17.88.10.1.4

rlQosPolicerCbs

Committed burst Value.

bytesSNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.4526.17.88.10.1.5

rlQosPolicerAction

Out of profile Action.

PolicerActionr/w

Type Values:

1	none
2	drop
3	remark
4	explicit-remark
5	cascadePointer

.1.3.6.1.4.1.4526.17.88.10.1.6

rlQosPolicerCasPointerRemVal

Remark value in case of explicit remark.
The functionality as cascade pointer is obsolete.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.10.1.7

rlQosPolicerStatus

The status of a table entry.
It is used to delete/Add an entry from this table.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.4526.17.88.10.1.8

rlQosPolicerPir

Peak rate value.
When both this and rlQosPolicerPbs are 0 this means the mode is Single Rate
and when they are both non 0 this means the mode is Two Rate.

kbpsSNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.4526.17.88.10.1.9

rlQosPolicerPbs

Peak burst Value.
When both this and rlQosPolicerPir are 0 this means the mode is Single Rate
and when they are both non 0 this means the mode is Two Rate.

bytesSNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.4526.17.88.10.1.10

rlQosPolicerPeakAction

Out of profile peak action.

PolicerActionr/w

Type Values:

1	none
2	drop
3	remark
4	explicit-remark
5	cascadePointer

.1.3.6.1.4.1.4526.17.88.10.1.11

rlQosPolicyMapTable

table

.1.3.6.1.4.1.4526.17.88.11 · 1 row entry · 3 columns

Open in standard view

Uses the netgear variant from /opt/observium/mibs/netgear.

Command help

Walk rlQosPolicyMapTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-QOS-CLI-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-QOS-CLI-MIB::rlQosPolicyMapTable'

This table specifies Policy Map Table Information

rlQosPolicyMapEntry row .1.3.6.1.4.1.4526.17.88.11.1

Each entry in this table describes one policy map.
The information includes: Index, Policy Map name,
Up to 6 class map names.
The index is sequential integer represent by rlQosPolicerIndex

Indexes

rlQosPolicyMapIndex

Column Syntax OID

rlQosPolicyMapIndex

Policy map Index.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.11.1.1

rlQosPolicyMapName

Policy map Name.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.4526.17.88.11.1.2

rlQosPolicyMapStatus

The status of a table entry.
It is used to delete/Add an entry from this table.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.4526.17.88.11.1.3

rlQosPolicyClassRefTable

table

.1.3.6.1.4.1.4526.17.88.12 · 1 row entry · 3 columns

Open in standard view

Uses the netgear variant from /opt/observium/mibs/netgear.

Command help

Walk rlQosPolicyClassRefTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-QOS-CLI-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-QOS-CLI-MIB::rlQosPolicyClassRefTable'

This table specifies The relationship
between policy map to class map

rlQosPolicyClassRefEntry row .1.3.6.1.4.1.4526.17.88.12.1

Each entry in this table describes the connection
between class-map entry to policy map by using pointers.
The index is Class map pointer
represent by rlQosPolicyClassRefClassPointer

Indexes

rlQosPolicyClassRefClassPointer

Column Syntax OID

rlQosPolicyClassRefClassPointer

The Index is the Class-map pointer

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.12.1.1

rlQosPolicyClassRefPolicyPointer

Policy map index Pointer

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.12.1.2

rlQosPolicyClassRefStatus

The status of a table entry.
It is used to delete/Add an entry from this table.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.4526.17.88.12.1.3

rlQosIfPolicyTable

table

.1.3.6.1.4.1.4526.17.88.13 · 1 row entry · 22 columns

Open in standard view

Uses the netgear variant from /opt/observium/mibs/netgear.

Command help

Walk rlQosIfPolicyTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-QOS-CLI-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-QOS-CLI-MIB::rlQosIfPolicyTable'

This table specifies for each interface
the Policy Map attach to it

rlQosIfPolicyEntry row .1.3.6.1.4.1.4526.17.88.13.1

Each entry in this table describes what policy
Map attached to specific Interface.
The index is Interface Index represent by rlIfIndex and
the interface type represent by rlIfType

Indexes

rlIfIndex rlIfType

Column Syntax OID

rlIfIndex

Interface Index.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.13.1.1

rlIfType

Interface Type(vlan/port).

InterfaceType

Type Values:

1	vlan
2	port

.1.3.6.1.4.1.4526.17.88.13.1.2

rlQosIfPolicyMapPointerIn

Policy map pointer Input.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.13.1.3

rlQosIfPolicyMapPointerOut

Policy map pointer Output.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.13.1.4

rlQosIfTrustActive

Interface Basic Mode Trust is active or not .

BinaryStatusr/w

Type Values:

1	disable
2	enable

.1.3.6.1.4.1.4526.17.88.13.1.5

rlQosPortShaperStatus

If there is shaper on the port

BinaryStatusr/w

Type Values:

1	disable
2	enable

.1.3.6.1.4.1.4526.17.88.13.1.6

rlQosCirPortShaper

The CIR for the port shaper.
N/A when the shper is disabled

bpsInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.13.1.7

rlQosCbsPortShaper

The CBS for the port shaper.
N/A when the shper is disabled

bytesInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.13.1.8

rlQosIfProfilePointer

Interface Profile name pointer.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.4526.17.88.13.1.9

rlQosQueueProfilePointer

Queue Profile name pointer.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.4526.17.88.13.1.10

rlQosQueueShapeProfilePointer

Queue shape Profile pointer.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.13.1.11

rlQosAclDefaultAction

When one ACL is enterd then what to do for the last rull.

AclDefaultActionr/w

Type Values:

1	deny-all
2	forward-all
3	application-specific

.1.3.6.1.4.1.4526.17.88.13.1.12

rlQosIfPolicyMapStatus

The status of a table entry.
It is used to delete/Add an entry from this table.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.4526.17.88.13.1.13

rlQosIfAclIn

Index of an ACL in the rlQosAclTable, which is applied
to the ingress of an interface.
0 - means no ACL applied.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.13.1.14

rlQosIfAclOut

Index of an ACL in the rlQosAclTable, which is applied
to the egress of an interface.
0 - means no ACL applied.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.13.1.15

rlQosIfPolicerIn

Index of an Policer in the rlQosPolicerTable, which is applied
to the ingress of an interface.
0 - means no Policer applied.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.13.1.16

rlQosPortRateLimitStatus

If there is Rate limit on the port

BinaryStatusr/w

Type Values:

1	disable
2	enable

.1.3.6.1.4.1.4526.17.88.13.1.17

rlQosCirPortRateLimit

The CIR for the port rate limit.
N/A when the Rate limit is disabled

bpsInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.13.1.18

rlQosCbsPortRateLimit

The CBS for the port Rate limit.
N/A when the Rate limit is disabled

bytesInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.13.1.19

rlQosIfIpv6AclIn

Index of an IPv6 ACL in the rlQosAclTable, which is applied
to the ingress of an interface.
0 - means no ACL applied.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.13.1.20

rlQosIfIpv6AclOut

Index of an IPv6 ACL in the rlQosAclTable, which is applied
to the egress of an interface.
0 - means no ACL applied.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.13.1.21

rlQosAclDefaultActionOut

When one egress ACL is enterd then what to do for the last rull.

AclDefaultActionr/w

Type Values:

1	deny-all
2	forward-all
3	application-specific

.1.3.6.1.4.1.4526.17.88.13.1.22

rlQosIfProfileCfgTable

table

.1.3.6.1.4.1.4526.17.88.14 · 1 row entry · 16 columns

Open in standard view

Uses the netgear variant from /opt/observium/mibs/netgear.

Command help

Walk rlQosIfProfileCfgTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-QOS-CLI-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-QOS-CLI-MIB::rlQosIfProfileCfgTable'

This table specifies for each Queue the Tail
Drop or WRED parameters and the EF of WRR
parameters.

rlQosIfProfileCfgEntry row .1.3.6.1.4.1.4526.17.88.14.1

Each entry in this table describes one queue
parameters: Tail-drop threshold for drop precedence
0,1,3 and the WRED min-max threshold and the probability
factor for Drop precedence 0,1,2 and the WRED Q factor
and the EF…

Indexes

rlIfProfileName rlQosQueueId

Column Syntax OID

rlIfProfileName

Interface Index.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.4526.17.88.14.1.1

rlQosQueueId

Queue id Index.

Integer32

Constraints:
range: 1-8

.1.3.6.1.4.1.4526.17.88.14.1.2

rlQosTdThersholdDp0

Tail Drop Threshold for Drop Precedence 0.

percentInteger32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.4526.17.88.14.1.3

rlQosTdThersholdDp1

Tail Drop Threshold for Drop Precedence 1.

percentInteger32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.4526.17.88.14.1.4

rlQosTdThersholdDp2

Tail Drop Threshold for Drop Precedence 2.

percentInteger32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.4526.17.88.14.1.5

rlQosRedMinDp0

WRED Min Threshold for Drop Precedence 2.

percentInteger32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.4526.17.88.14.1.6

rlQosRedMaxDp0

WRED Max Threshold for Drop Precedence 0.

percentInteger32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.4526.17.88.14.1.7

rlQosRedProbDp0

WRED probability for Drop Precedence 0.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.14.1.8

rlQosRedMinDp1

WRED Min Threshold for Drop Precedence 2.

percentInteger32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.4526.17.88.14.1.9

rlQosRedMaxDp1

WRED Max Threshold for Drop Precedence 1.

percentInteger32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.4526.17.88.14.1.10

rlQosRedProbDp1

WRED probability for Drop Precedence 1.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.14.1.11

rlQosRedMinDp2

WRED Min Threshold for Drop Precedence 2.

percentInteger32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.4526.17.88.14.1.12

rlQosRedMaxDp2

WRED Max Threshold for Drop Precedence 2.

percentInteger32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.4526.17.88.14.1.13

rlQosRedProbDp2

WRED probability for Drop Precedence 2.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.14.1.14

rlQosRedQweight

Q factor for WRED.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.14.1.15

rlQosIfprofileStatus

The status of a table entry.
It is used to delete/Add an entry from this table.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.4526.17.88.14.1.16

rlQosDscpMutationTable

table

.1.3.6.1.4.1.4526.17.88.15 · 1 row entry · 2 columns

Open in standard view

Uses the netgear variant from /opt/observium/mibs/netgear.

Command help

Walk rlQosDscpMutationTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-QOS-CLI-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-QOS-CLI-MIB::rlQosDscpMutationTable'

This table specifies The DSCP
Mutation table

rlQosDscpMutationEntry row .1.3.6.1.4.1.4526.17.88.15.1

Each entry in this table describes the new
DSCP for the packet.
The index is Old DSCP represent by rlQosOldDscp

Indexes

rlQosOldDscp

Column	Syntax	OID
rlQosOldDscp Old DSCP.	Integer32 Constraints: `range: 0-63`	`.1.3.6.1.4.1.4526.17.88.15.1.1`
rlQosNewDscp New DSCP.	Integer32r/w Constraints: `range: 0-63`	`.1.3.6.1.4.1.4526.17.88.15.1.2`

rlQosDscpRemarkTable

table

.1.3.6.1.4.1.4526.17.88.16 · 1 row entry · 3 columns

Open in standard view

Uses the netgear variant from /opt/observium/mibs/netgear.

Command help

Walk rlQosDscpRemarkTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-QOS-CLI-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-QOS-CLI-MIB::rlQosDscpRemarkTable'

This table specifies The DSCP
Remark table

rlQosDscpRemarkEntry row .1.3.6.1.4.1.4526.17.88.16.1

Each entry in this table describes the new
DSCP for the packet.
The index is Old DSCP represent by rlQosOldDscp

Indexes

rlQosRmOldDscp

Column	Syntax	OID
rlQosRmOldDscp Old DSCP.	Integer32 Constraints: `range: 0-63`	`.1.3.6.1.4.1.4526.17.88.16.1.1`
rlQosRmNewDscp Specifies new DSCP in the violation action.	Integer32r/w Constraints: `range: 0-63`	`.1.3.6.1.4.1.4526.17.88.16.1.2`
rlQosRmNewExceedDscp Specifies new DSCP in the exceed action.	Integer32r/w Constraints: `range: 0-63`	`.1.3.6.1.4.1.4526.17.88.16.1.3`

rlQosCosQueueTable

table

.1.3.6.1.4.1.4526.17.88.17 · 1 row entry · 2 columns

Open in standard view

Uses the netgear variant from /opt/observium/mibs/netgear.

Command help

Walk rlQosCosQueueTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-QOS-CLI-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-QOS-CLI-MIB::rlQosCosQueueTable'

This table specifies The Cos
to queue map table

rlQosCosQueueEntry row .1.3.6.1.4.1.4526.17.88.17.1

Each entry in this table describes queue ID.
The index is CoS represent by rlQosCosIndex

Indexes

rlQosCosIndex

Column	Syntax	OID
rlQosCosIndex CoS value (0-7).	Integer32 Constraints: `range: 0-7`	`.1.3.6.1.4.1.4526.17.88.17.1.1`
rlQosCosQueueId Queue ID.	Integer32r/w Constraints: `range: 1-8`	`.1.3.6.1.4.1.4526.17.88.17.1.2`

rlQosDscpQueueTable

table

.1.3.6.1.4.1.4526.17.88.18 · 1 row entry · 2 columns

Open in standard view

Uses the netgear variant from /opt/observium/mibs/netgear.

Command help

Walk rlQosDscpQueueTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-QOS-CLI-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-QOS-CLI-MIB::rlQosDscpQueueTable'

This table specifies The DSCP
to Queue map table

rlQosDscpQueueEntry row .1.3.6.1.4.1.4526.17.88.18.1

Each entry in this table describes The
Queue Number.
The index is DSCP represent by rlQosDscpIndex

Indexes

rlQosDscpIndex

Column	Syntax	OID
rlQosDscpIndex DSCP value.	Integer32 Constraints: `range: 0-63`	`.1.3.6.1.4.1.4526.17.88.18.1.1`
rlQosQueueNum Queue Number.	Integer32r/w Constraints: `range: 1-8`	`.1.3.6.1.4.1.4526.17.88.18.1.2`

rlQosTcpPortQueueTable

table

.1.3.6.1.4.1.4526.17.88.19 · 1 row entry · 3 columns

Open in standard view

Uses the netgear variant from /opt/observium/mibs/netgear.

Command help

Walk rlQosTcpPortQueueTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-QOS-CLI-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-QOS-CLI-MIB::rlQosTcpPortQueueTable'

This table specifies TCP
Port to Queue map table

rlQosTcpPortQueueEntry row .1.3.6.1.4.1.4526.17.88.19.1

Each entry in this table describes The
Queue Number.
The index is TCP/UDP port represent by rlQosTcpUdpPort

Indexes

rlQosTcpPort

Column Syntax OID

rlQosTcpPort

TCP port number.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.19.1.1

rlQosTcpQueueValue

Queue Number.

Integer32r/w

Constraints:
range: 1-8

.1.3.6.1.4.1.4526.17.88.19.1.2

rlQosTcpPortQueueStatus

The status of a table entry.
It is used to delete/Add an entry from this table.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.4526.17.88.19.1.3

rlQosUdpPortQueueTable

table

.1.3.6.1.4.1.4526.17.88.20 · 1 row entry · 3 columns

Open in standard view

Uses the netgear variant from /opt/observium/mibs/netgear.

Command help

Walk rlQosUdpPortQueueTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-QOS-CLI-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-QOS-CLI-MIB::rlQosUdpPortQueueTable'

This table specifies UDP
Port to Queue map table

rlQosUdpPortQueueEntry row .1.3.6.1.4.1.4526.17.88.20.1

Each entry in this table describes The
Queue Number.
The index is UDP port represent by rlQosTcpUdpPort

Indexes

rlQosUdpPort

Column Syntax OID

rlQosUdpPort

UDP port number.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.20.1.1

rlQosUdpQueueValue

Queue value.

Integer32r/w

Constraints:
range: 1-8

.1.3.6.1.4.1.4526.17.88.20.1.2

rlQosUdpPortQueueStatus

The status of a table entry.
It is used to delete/Add an entry from this table.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.4526.17.88.20.1.3

rlQosEfManageTable

table

.1.3.6.1.4.1.4526.17.88.21 · 1 row entry · 3 columns

Open in standard view

Uses the netgear variant from /opt/observium/mibs/netgear.

Command help

Walk rlQosEfManageTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-QOS-CLI-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-QOS-CLI-MIB::rlQosEfManageTable'

This table specifies UDP
Port to DSCP map table

rlQosEfManageEntry row .1.3.6.1.4.1.4526.17.88.21.1

This Table describes The
EF management for the system.
The index is UDP port represent by rlQosEfQueueId

Indexes

rlQosEfQueueId

Column Syntax OID

rlQosEfQueueId

Queue-ID.

Integer32

Constraints:
range: 1-8

.1.3.6.1.4.1.4526.17.88.21.1.1

rlQosEfState

Enable/disable

BinaryStatusr/w

Type Values:

1	disable
2	enable

.1.3.6.1.4.1.4526.17.88.21.1.2

rlQosEfPriority

The priority of the queue

Integer32r/w

Constraints:
range: 1-8

.1.3.6.1.4.1.4526.17.88.21.1.3

rlQosQueueProfileTable

table

.1.3.6.1.4.1.4526.17.88.22 · 1 row entry · 19 columns

Open in standard view

Uses the netgear variant from /opt/observium/mibs/netgear.

Command help

Walk rlQosQueueProfileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-QOS-CLI-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-QOS-CLI-MIB::rlQosQueueProfileTable'

This table describes the queue managment profiles

rlQosQueueProfileEntry row .1.3.6.1.4.1.4526.17.88.22.1

Each entry in this table describes The
queue managment profile Value.
The index is profile name represent by rlQueueProfileName

Indexes

rlQueueProfileName

Column Syntax OID

rlQueueProfileName

Profile name for the Queue profile.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.4526.17.88.22.1.1

rlQosTypeQueue1

EF or WRR

QueueTyper/w

Type Values:

1	ef
2	wrr

.1.3.6.1.4.1.4526.17.88.22.1.2

rlQosValueQueue1

for EF read-only for wrr the weight

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.22.1.3

rlQosTypeQueue2

EF or WRR

QueueTyper/w

Type Values:

1	ef
2	wrr

.1.3.6.1.4.1.4526.17.88.22.1.4

rlQosValueQueue2

for EF read-only for wrr the weight

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.22.1.5

rlQosTypeQueue3

EF or WRR

QueueTyper/w

Type Values:

1	ef
2	wrr

.1.3.6.1.4.1.4526.17.88.22.1.6

rlQosValueQueue3

for EF read-only for wrr the weight

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.22.1.7

rlQosTypeQueue4

EF or WRR

QueueTyper/w

Type Values:

1	ef
2	wrr

.1.3.6.1.4.1.4526.17.88.22.1.8

rlQosValueQueue4

for EF read-only for wrr the weight

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.22.1.9

rlQosTypeQueue5

EF or WRR

QueueTyper/w

Type Values:

1	ef
2	wrr

.1.3.6.1.4.1.4526.17.88.22.1.10

rlQosValueQueue5

for EF read-only for wrr the weight

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.22.1.11

rlQosTypeQueue6

EF or WRR

QueueTyper/w

Type Values:

1	ef
2	wrr

.1.3.6.1.4.1.4526.17.88.22.1.12

rlQosValueQueue6

for EF read-only for wrr the weight

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.22.1.13

rlQosTypeQueue7

EF or WRR

QueueTyper/w

Type Values:

1	ef
2	wrr

.1.3.6.1.4.1.4526.17.88.22.1.14

rlQosValueQueue7

for EF read-only for wrr the weight

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.22.1.15

rlQosTypeQueue8

EF or WRR

QueueTyper/w

Type Values:

1	ef
2	wrr

.1.3.6.1.4.1.4526.17.88.22.1.16

rlQosValueQueue8

for EF read-only for wrr the weight

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.22.1.17

rlQosQueueProfileStatus

The status of a table entry.
It is used to delete/Add an entry from this table.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.4526.17.88.22.1.18

rlQosNumOfIfConnections

how many time this entry connected to the if policy table

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.22.1.19

rlQosQueueShapeProfileTable

table

.1.3.6.1.4.1.4526.17.88.23 · 1 row entry · 18 columns

Open in standard view

Uses the netgear variant from /opt/observium/mibs/netgear.

Command help

Walk rlQosQueueShapeProfileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-QOS-CLI-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-QOS-CLI-MIB::rlQosQueueShapeProfileTable'

This table specifies the queue shaper profile

rlQosQueueShapeProfileEntry row .1.3.6.1.4.1.4526.17.88.23.1

Each entry in this table describes The
shaper profile for all queues.
The index sequencial index represent by rlQosQueueShapeIndex

Indexes

rlQosQueueShapeIndex

Column Syntax OID

rlQosQueueShapeIndex

Profile Index.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.23.1.1

rlQosCirQueue1

CIR for Queue1 0 for not active

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.23.1.2

rlQosCbsQueue1

CBS for Queue1 0 for not active

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.23.1.3

rlQosCirQueue2

CIR for Queue2 0 for not active

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.23.1.4

rlQosCbsQueue2

CBS for Queue2 0 for not active

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.23.1.5

rlQosCirQueue3

CIR for Queue3 0 for not active

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.23.1.6

rlQosCbsQueue3

CBS for Queue3 0 for not active

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.23.1.7

rlQosCirQueue4

CIR for Queue4 0 for not active

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.23.1.8

rlQosCbsQueue4

CBS for Queue4 0 for not active

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.23.1.9

rlQosCirQueue5

CIR for Queue5 0 for not active

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.23.1.10

rlQosCbsQueue5

CBS for Queue5 0 for not active

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.23.1.11

rlQosCirQueue6

CIR for Queue6 0 for not active

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.23.1.12

rlQosCbsQueue6

CBS for Queue6 0 for not active

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.23.1.13

rlQosCirQueue7

CIR for Queue7 0 for not active

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.23.1.14

rlQosCbsQueue7

CBS for Queue7 0 for not active

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.23.1.15

rlQosCirQueue8

CIR for Queue8 0 for not active

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.23.1.16

rlQosCbsQueue8

CBS for Queue8 0 for not active

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.23.1.17

rlQosQueueShapeProfileStatus

The status of a table entry.
It is used to delete/Add an entry from this table.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.4526.17.88.23.1.18

rlQosAclCounterTable

table

.1.3.6.1.4.1.4526.17.88.24 · 1 row entry · 4 columns

Open in standard view

Uses the netgear variant from /opt/observium/mibs/netgear.

Command help

Walk rlQosAclCounterTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-QOS-CLI-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-QOS-CLI-MIB::rlQosAclCounterTable'

The  table is used to show statistics for
ACL applied on an interface.

rlQosAclCounterEntry row .1.3.6.1.4.1.4526.17.88.24.1

This entry shows value of conter for a
particular ACE of an ACL.

Indexes

rlQosAclCounterInterface rlQosAclCounterAclIndex rlQosAclCounterAceIndex

Column	Syntax	OID
rlQosAclCounterInterface Interface Index on which ACL is applied.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.4526.17.88.24.1.1`
rlQosAclCounterAclIndex Index of ACL, which was applied on the IfIndex.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.4526.17.88.24.1.2`
rlQosAclCounterAceIndex Index of ACE, which is belong to an ACL.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.4526.17.88.24.1.3`
rlQosAclCounterValue The value of the ACE counter.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.17.88.24.1.4`

rlQosFreeIndexesTable

table

.1.3.6.1.4.1.4526.17.88.25 · 1 row entry · 2 columns

Open in standard view

Uses the netgear variant from /opt/observium/mibs/netgear.

Command help

Walk rlQosFreeIndexesTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-QOS-CLI-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-QOS-CLI-MIB::rlQosFreeIndexesTable'

The  table is used to get free indexes of tables to create
new entries. The algorithm for free indexes depends on
table's type:
Tuple table      - first free index.
Offset table     - first free index.
ACE table        - last used index + ACE indexes delta.
ACL table        - first free index.
Class Map table  - last used index + Class Map indexes delta.
Policy Map table - first free index.
Policer Table    - first free index.
The ACE indexes delta and Class Map indexes delta are used
to supply QoS MIB user easy insert entry capabilities.
Values of these deltas depend on the MIB implementation.
The 'Get and increment' approach is used in all cases.

rlQosFreeIndexesEntry row .1.3.6.1.4.1.4526.17.88.25.1

The entry is used to get free index for particular table.

Indexes

rlQosFreeIndexesTableId

Column Syntax OID

rlQosFreeIndexesTableId

Identification of the table, for which free index
is retrieved.

Enumeration

Enumerated Values:

1	tuple
2	offset
3	ace
4	acl
5	class
6	policy
7	policer
8	shaper

.1.3.6.1.4.1.4526.17.88.25.1.1

rlQosFreeIndexesValue

Free index for table. 0 means no free entries.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.25.1.2

rlQosNamesToIndexesTable

table

.1.3.6.1.4.1.4526.17.88.26 · 1 row entry · 3 columns

Open in standard view

Uses the netgear variant from /opt/observium/mibs/netgear.

Command help

Walk rlQosNamesToIndexesTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-QOS-CLI-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-QOS-CLI-MIB::rlQosNamesToIndexesTable'

The table is used to get the ACL,Class-Map and Policy-Map
indexes from the name.

rlQosNamesToIndexesEntry row .1.3.6.1.4.1.4526.17.88.26.1

The entry is used to get index form particular name and table type.

Indexes

rlQosNamesToIndexesTableId rlQosNamesToIndexesName

Column Syntax OID

rlQosNamesToIndexesTableId

Identification of the table, for which the index
is retrieved.

Enumeration

Enumerated Values:

1	acl
2	class
3	policy
4	policer

.1.3.6.1.4.1.4526.17.88.26.1.1

rlQosNamesToIndexesName

The name of the entry

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.4526.17.88.26.1.2

rlQosNamesToIndexesValue

the index for table

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.26.1.3

rlQosCosQueueDefaultMapTable

table

.1.3.6.1.4.1.4526.17.88.29 · 1 row entry · 2 columns

Open in standard view

Uses the netgear variant from /opt/observium/mibs/netgear.

Command help

Walk rlQosCosQueueDefaultMapTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-QOS-CLI-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-QOS-CLI-MIB::rlQosCosQueueDefaultMapTable'

The table is used to set default 802.1p map (vpt to queue)

rlQosCosQueueDefaultMapEntry row .1.3.6.1.4.1.4526.17.88.29.1

The entry is used to get index form particular name and table type.

Indexes

rlQosCosQueueDefaultMapVpt

Column	Syntax	OID
rlQosCosQueueDefaultMapVpt vlan priority tag , 3 bits of priority which determine the service class.	Integer32 Constraints: `range: 0-7`	`.1.3.6.1.4.1.4526.17.88.29.1.1`
rlQosCosQueueDefaultMapQueueId the queue id vary from the first queue id to Max Number of queues supported	Integer32 Constraints: `range: 1-8`	`.1.3.6.1.4.1.4526.17.88.29.1.2`

rlQosPredefBlockAclTable

table

.1.3.6.1.4.1.4526.17.88.30 · 1 row entry · 4 columns

Open in standard view

Uses the netgear variant from /opt/observium/mibs/netgear.

Command help

Walk rlQosPredefBlockAclTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-QOS-CLI-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-QOS-CLI-MIB::rlQosPredefBlockAclTable'

The table is used apply predefined ACLs to interfaces.
Predefined ACLs is ACL to filter particular protocol or
protocol's family. These ACL may operate simultaneously
with IP and MAC ACLs.

rlQosPredefBlockAclEntry row .1.3.6.1.4.1.4526.17.88.30.1

The entry is used to apply predefined ACLs to the interface.

Indexes

rlQosPredefBlockAclIfIndex rlQosPredefBlockAclIfType

Column Syntax OID

rlQosPredefBlockAclIfIndex

IfIndex of port/trunk or VLAN tag of VLAN
on which predefined ACLa will be configured.

IF-MIBInterfaceIndex

Type Constraints:
range: 1..2147483647

Description:

A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …

.1.3.6.1.4.1.4526.17.88.30.1.1

rlQosPredefBlockAclIfType

Interface Type(vlan/port).

InterfaceType

Type Values:

1	vlan
2	port

.1.3.6.1.4.1.4526.17.88.30.1.2

rlQosPredefBlockAclMask

This bitmap defines predefined ACL which are applied
on an interface. The table below defines bitmasks for
supported predefined ACL.
Protocol/Family bitmask Description
==============================================…

OctetStringr/w

Constraints:
range: 1-1

.1.3.6.1.4.1.4526.17.88.30.1.3

rlQosPredefBlockAclStatus

The status of a table entry.
It is used to delete/Add an entry from this table.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.4526.17.88.30.1.4

rlQosAceTidxTable

table

.1.3.6.1.4.1.4526.17.88.31 · 1 row entry · 20 columns

Open in standard view

Uses the netgear variant from /opt/observium/mibs/netgear.

Command help

Walk rlQosAceTidxTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-QOS-CLI-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-QOS-CLI-MIB::rlQosAceTidxTable'

This table specifies ACE table with two index information

rlQosAceTidxEntry row .1.3.6.1.4.1.4526.17.88.31.1

Each entry in this table describes one Classifier Element.
The information includes: Action the ACE's Type the up to 11 tuples
pointers. The index is sequential integer represent by
rlQosAceTidxAclIndex ACL index and rl…

Indexes

rlQosAceTidxAclIndex rlQosAceTidxIndex

Column Syntax OID

rlQosAceTidxAclIndex

An arbitrary incremental Index
for the ACL ACE connection.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.31.1.1

rlQosAceTidxIndex

An arbitrary incremental Index
for the ACE table.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.31.1.2

rlQosAceTidxAction

ACE Action to take.

AceActionTyper/w

Type Values:

1	permit
2	deny
3	deny-DisablePort
4	deny-LogInput
5	permit-LogInput

.1.3.6.1.4.1.4526.17.88.31.1.3

rlQosAceTidxType

ACE Type

AceObjectTyper/w

Type Values:

1	ip
2	ip-TCP
3	ip-UDP
4	ip-Offset
5	mac
6	mac-Offset
7	ip-ICMP
8	ip-IGMP
9	ipv6
10	ipv6-TCP
11	ipv6-UDP
12	ipv6-Offset
13	ipv6-ICMP

.1.3.6.1.4.1.4526.17.88.31.1.4

rlQosAceTidxTuple1

ACE Tuple pointer.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.31.1.5

rlQosAceTidxTuple2

ACE Tuple pointer.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.31.1.6

rlQosAceTidxTuple3

ACE Tuple pointer.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.31.1.7

rlQosAceTidxTuple4

ACE Tuple pointer.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.31.1.8

rlQosAceTidxTuple5

ACE Tuple pointer.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.31.1.9

rlQosAceTidxTuple6

ACE Tuple pointer.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.31.1.10

rlQosAceTidxTuple7

ACE Tuple pointer.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.31.1.11

rlQosAceTidxTuple8

ACE Tuple pointer.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.31.1.12

rlQosAceTidxAccount

ACE Accounting state.
When set to 'enabled' than appropriate statistic's
counter is provided for an ACE.

BinaryStatusr/w

Type Values:

1	disable
2	enable

.1.3.6.1.4.1.4526.17.88.31.1.13

rlQosAceTidxStatus

The status of a table entry.
It is used to delete/Add an entry from this table.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.4526.17.88.31.1.14

rlQosAceTidxTimeRange

ACE time range name.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.4526.17.88.31.1.15

rlQosAceTidxTimeRangeIsActive

ACE time range is rule active state shows is ACE currently active or not.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.4526.17.88.31.1.16

rlQosAceTidxTuple9

ACE Tuple pointer.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.31.1.17

rlQosAceTidxTuple10

ACE Tuple pointer.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.31.1.18

rlQosAceTidxTuple11

ACE Tuple pointer.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.31.1.19

rlQosAceTidxActionDropType

This field is valid only if AceActionType is
deny or deny-DisablePort.

RlQosAceTidxActionDropTyper/w

Type Values:

1	hardDrop
2	softDrop

.1.3.6.1.4.1.4526.17.88.31.1.20

rlQosDscpQueueDefaultMapTable

table

.1.3.6.1.4.1.4526.17.88.33 · 1 row entry · 2 columns

Open in standard view

Uses the netgear variant from /opt/observium/mibs/netgear.

Command help

Walk rlQosDscpQueueDefaultMapTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-QOS-CLI-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-QOS-CLI-MIB::rlQosDscpQueueDefaultMapTable'

The table is used to set default dscp to queue map

rlQosDscpQueueDefaultMapEntry row .1.3.6.1.4.1.4526.17.88.33.1

The entry is used to get index form particular name and table type.

Indexes

rlQosDscpQueueDefaultMapDscp

Column	Syntax	OID
rlQosDscpQueueDefaultMapDscp dscp , 6 bits of priority which determine the service class.	Integer32 Constraints: `range: 0-63`	`.1.3.6.1.4.1.4526.17.88.33.1.1`
rlQosDscpQueueDefaultMapQueueId the queue id vary from the first queue id to Max Number of queues supported	Integer32 Constraints: `range: 1-8`	`.1.3.6.1.4.1.4526.17.88.33.1.2`

rlQosDscpToDpTable

table

.1.3.6.1.4.1.4526.17.88.34 · 1 row entry · 2 columns

Open in standard view

Uses the netgear variant from /opt/observium/mibs/netgear.

Command help

Walk rlQosDscpToDpTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-QOS-CLI-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-QOS-CLI-MIB::rlQosDscpToDpTable'

This table specifies The DSCP
To Dp table

rlQosDscpToDpEntry row .1.3.6.1.4.1.4526.17.88.34.1

Each entry in this table describes the new
DP for the packet.
The index is DSCP represent by rlQosDscp

Indexes

rlQosDscp

Column	Syntax	OID
rlQosDscp Packet DSCP.	Integer32 Constraints: `range: 0-63`	`.1.3.6.1.4.1.4526.17.88.34.1.1`
rlQosDp New DP.	Integer32r/w Constraints: `range: 0-2`	`.1.3.6.1.4.1.4526.17.88.34.1.2`

rlQosPortPolicyStatisticsTable

table

.1.3.6.1.4.1.4526.17.88.35.1 · 1 row entry · 4 columns

Open in standard view

Uses the netgear variant from /opt/observium/mibs/netgear.

Command help

Walk rlQosPortPolicyStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-QOS-CLI-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-QOS-CLI-MIB::rlQosPortPolicyStatisticsTable'

This table specifies statistics counter for policies with specific actions

rlQosPortPolicyStatisticsEntry row .1.3.6.1.4.1.4526.17.88.35.1.1

Each entry in this table describes counter per port.
The index is port represent by rlIfIndex.
In each entry represents counter, it's type , it's size and whether it's enabled.

Indexes

rlIfIndex rlIfType rlQosPortPolicyStatisticsCntrType

Column Syntax OID

rlQosPortPolicyStatisticsCntrType

Counter type.

StatisticsCntrTyper/w

Type Values:

1	statisticsCntrTypeSetDSCP
2	statisticsCntrTypeDeny

.1.3.6.1.4.1.4526.17.88.35.1.1.1

rlQosPortPolicyStatisticsCntrNumOfBits

Counter size in bits.

StatisticsCntrNumOfBitsType

Type Values:

32	uint32
48	uint48
64	uint64

.1.3.6.1.4.1.4526.17.88.35.1.1.2

rlQosPortPolicyStatisticsEnableCounting

Indication whether the counter is enabled.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.4526.17.88.35.1.1.3

rlQosPortPolicyStatisticsCounterValue

Counter value.

SNMPv2-SMICounter64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.4526.17.88.35.1.1.4

rlQosSinglePolicerStatisticsTable

table

.1.3.6.1.4.1.4526.17.88.35.2 · 1 row entry · 5 columns

Open in standard view

Uses the netgear variant from /opt/observium/mibs/netgear.

Command help

Walk rlQosSinglePolicerStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-QOS-CLI-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-QOS-CLI-MIB::rlQosSinglePolicerStatisticsTable'

This table specifies statistics counters per QoS meter

rlQosSinglePolicerStatisticsEntry row .1.3.6.1.4.1.4526.17.88.35.2.1

Each entry in this table describes counter per meter. The index is port represent by RlQosMeterStatisticsPort and RlQosMeterStatisticsPolicerPointer. In each entry there are fields representing whether t…

Indexes

rlIfIndex rlQosPolicerIndex

Column Syntax OID

rlQosSinglePolicerStatisticsInProfileCounterValue

Counter value of in profile traffic.

SNMPv2-SMICounter64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.4526.17.88.35.2.1.1

rlQosSinglePolicerStatisticsInProfileCntrNumOfBits

Counter size in bits for in profile counter.

StatisticsCntrNumOfBitsType

Type Values:

32	uint32
48	uint48
64	uint64

.1.3.6.1.4.1.4526.17.88.35.2.1.2

rlQosSinglePolicerStatisticsOutProfileCounterValue

Counter value of Out Profile traffic.

SNMPv2-SMICounter64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.4526.17.88.35.2.1.3

rlQosSinglePolicerStatisticsOutProfileCntrNumOfBits

Counter size in bits for out profile counter.

StatisticsCntrNumOfBitsType

Type Values:

32	uint32
48	uint48
64	uint64

.1.3.6.1.4.1.4526.17.88.35.2.1.4

rlQosSinglePolicerStatisticsStatus

The status of a table entry.
It is used to delete an entry from this table.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.4526.17.88.35.2.1.5

rlQosAggregatePolicerStatisticsTable

table

.1.3.6.1.4.1.4526.17.88.35.3 · 1 row entry · 5 columns

Open in standard view

Uses the netgear variant from /opt/observium/mibs/netgear.

Command help

Walk rlQosAggregatePolicerStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-QOS-CLI-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-QOS-CLI-MIB::rlQosAggregatePolicerStatisticsTable'

This table specifies statistics counters per QoS aggregate meter

rlQosAggregatePolicerStatisticsEntry row .1.3.6.1.4.1.4526.17.88.35.3.1

Each entry in this table describes counter per aggregate meter.
The index is rlQosPolicerIndex.
In each entry there are fields representing whether the counter for the
meter is enabled and three counters values - for gr…

Indexes

rlQosPolicerIndex

Column Syntax OID

rlQosAggregatePolicerStatisticsInProfileCounterValue

Counter value of In Profile amount of bytes.

SNMPv2-SMICounter64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.4526.17.88.35.3.1.1

rlQosAggregatePolicerStatisticsInProfileCntrNumOfBits

Counter size in bits for In Profile .

StatisticsCntrNumOfBitsType

Type Values:

32	uint32
48	uint48
64	uint64

.1.3.6.1.4.1.4526.17.88.35.3.1.2

rlQosAggregatePolicerStatisticsOutProfileCounterValue

Counter value of Out Profile amount of bytes.

SNMPv2-SMICounter64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.4526.17.88.35.3.1.3

rlQosAggregatePolicerStatisticsOutProfileCntrNumOfBits

Counter size in bits for Out Profile.

StatisticsCntrNumOfBitsType

Type Values:

32	uint32
48	uint48
64	uint64

.1.3.6.1.4.1.4526.17.88.35.3.1.4

rlQosAggregatePolicerStatisticsStatus

The status of a table entry.
It is used to delete an entry from this table.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.4526.17.88.35.3.1.5

rlQosOutQueueStatisticsTable

table

.1.3.6.1.4.1.4526.17.88.35.4 · 1 row entry · 13 columns

Open in standard view

Uses the netgear variant from /opt/observium/mibs/netgear.

Command help

Walk rlQosOutQueueStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-QOS-CLI-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-QOS-CLI-MIB::rlQosOutQueueStatisticsTable'

This table specifies statistics counters per VLAN/Port/Queue/Drop Precedence

rlQosOutQueueStatisticsEntry row .1.3.6.1.4.1.4526.17.88.35.4.1

Each entry in this table describes counter per any permutation of
Port/VLAN/Queue/Drop Precedence. Each of the above can a group off 'All'.
The index is port represent by rlQosOutQueueStatisticsCountrID.
In each entry t…

Indexes

rlQosOutQueueStatisticsCountrID

Column Syntax OID

rlQosOutQueueStatisticsCountrID

Counter id, the key of the table.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.35.4.1.1

rlQosOutQueueStatisticsIfIndexList

Port for which the flow is counted.

Q-BRIDGE-MIBPortListr/w

.1.3.6.1.4.1.4526.17.88.35.4.1.2

rlQosOutQueueStatisticsPortAll

Indication for whether the port is configured as range of all the ports

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.4526.17.88.35.4.1.3

rlQosOutQueueStatisticsVlan

VLAN for which the flow is counted.

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.35.4.1.4

rlQosOutQueueStatisticsVlanAll

Indication for whether the VLAN is configured as range of all the VLANS

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.4526.17.88.35.4.1.5

rlQosOutQueueStatisticsQueue

Queue for which the flow is counted.

Integer32r/w

Constraints:
range: 1-8

.1.3.6.1.4.1.4526.17.88.35.4.1.6

rlQosOutQueueStatisticsQueueAll

Indication for whether the queue is configured as range of all the Queues

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.4526.17.88.35.4.1.7

rlQosOutQueueStatisticsDP

Drop Precedence for which the flow is counted.

NETGEAR-RADLAN-POLICY-MIBStatisticsDPTyper/w

Type Values:

1	green
2	yellow
3	red

.1.3.6.1.4.1.4526.17.88.35.4.1.8

rlQosOutQueueStatisticsDPAll

Indication for whether the DP is configured as range of all the DPs

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.4526.17.88.35.4.1.9

rlQosOutQueueStatisticsCounterTailDropValue

The counter for tail dropped value.

SNMPv2-SMICounter64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.4526.17.88.35.4.1.10

rlQosOutQueueStatisticsCounterAllValue

The counter for all traffic value.

SNMPv2-SMICounter64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.4526.17.88.35.4.1.11

rlQosOutQueueStatisticsCntrNumOfBits

Counter size in bits for the counter.

StatisticsCntrNumOfBitsType

Type Values:

32	uint32
48	uint48
64	uint64

.1.3.6.1.4.1.4526.17.88.35.4.1.12

rlQosOutQueueStatisticsStatus

The status of a table entry.
It is used to delete an entry from this table.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.4526.17.88.35.4.1.13

rlQosGlobalStatisticsCntrsTable

table

.1.3.6.1.4.1.4526.17.88.35.5 · 1 row entry · 4 columns

Open in standard view

Uses the netgear variant from /opt/observium/mibs/netgear.

Command help

Walk rlQosGlobalStatisticsCntrsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-QOS-CLI-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-QOS-CLI-MIB::rlQosGlobalStatisticsCntrsTable'

This table specifies statistics global counters  for specific rules for all ports
that they are connected to

rlQosGlobalStatisticsCntrsEntry row .1.3.6.1.4.1.4526.17.88.35.5.1

Each entry represents global counter.

Indexes

rlQosGlobalStatisticsCntrsType

Column Syntax OID

rlQosGlobalStatisticsCntrsType

Counter type.

StatisticsCntrType

Type Values:

1	statisticsCntrTypeSetDSCP
2	statisticsCntrTypeDeny

.1.3.6.1.4.1.4526.17.88.35.5.1.1

rlQosGlobalStatisticsCntrsNumOfBits

Counter size in bits.

StatisticsCntrNumOfBitsType

Type Values:

32	uint32
48	uint48
64	uint64

.1.3.6.1.4.1.4526.17.88.35.5.1.2

rlQosGlobalStatisticsCntrsCounterValue

Counter value.

SNMPv2-SMICounter64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.4526.17.88.35.5.1.3

rlQosGlobalStatisticsStatus

The status of a table entry.
It is used to delete an entry from this table.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.4526.17.88.35.5.1.4

rlQosClassifierUtilizationTable

table

.1.3.6.1.4.1.4526.17.88.36.1 · 1 row entry · 4 columns

Open in standard view

Uses the netgear variant from /opt/observium/mibs/netgear.

Command help

Walk rlQosClassifierUtilizationTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-QOS-CLI-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-QOS-CLI-MIB::rlQosClassifierUtilizationTable'

A table containing Classifier utilization information.
Each row represents objects for a particular Unit
present in this system.

rlQosClassifierUtilizationEntry row .1.3.6.1.4.1.4526.17.88.36.1.1

A Single entry containing Classifier utilization information.

Indexes

rlQosClassifierUtilizationUnitId

Column	Syntax	OID
rlQosClassifierUtilizationUnitId The Unit ID of this Classifier. must be unique per entry. This is an index into the table.	Unsigned32 Constraints: `range: 1-4294967295`	`.1.3.6.1.4.1.4526.17.88.36.1.1.1`
rlQosClassifierUtilizationPercent The classifier utilization percentage.	Unsigned32 Constraints: `range: 0-100`	`.1.3.6.1.4.1.4526.17.88.36.1.1.2`
rlQosClassifierUtilizationRulesNumber The classifier utilization number of used rules, in short rules resolution.	Unsigned32 Constraints: `range: 0-4294967295`	`.1.3.6.1.4.1.4526.17.88.36.1.1.3`
rlQosClassifierUtilizationFreeRulesNumber The classifier utilization number of not used yet rules on the unit, in short rules resolution.	Unsigned32 Constraints: `range: 0-4294967295`	`.1.3.6.1.4.1.4526.17.88.36.1.1.4`

rlQosPortToProfileMappingTable

table

.1.3.6.1.4.1.4526.17.88.37 · 1 row entry · 2 columns

Open in standard view

Uses the netgear variant from /opt/observium/mibs/netgear.

Command help

Walk rlQosPortToProfileMappingTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-QOS-CLI-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-QOS-CLI-MIB::rlQosPortToProfileMappingTable'

This table maps between port and profile

rlQosPortToProfileMappingEntry row .1.3.6.1.4.1.4526.17.88.37.1

Each entry in this table describes
mapping between port and profile

Indexes

rlQosPort

Column	Syntax	OID
rlQosPort Port number	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.4526.17.88.37.1.1`
rlQosProfileName profile	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.4526.17.88.37.1.2`

rlQosPolicyClassPriorityRefTable

table

.1.3.6.1.4.1.4526.17.88.39 · 1 row entry · 4 columns

Open in standard view

Uses the netgear variant from /opt/observium/mibs/netgear.

Command help

Walk rlQosPolicyClassPriorityRefTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-QOS-CLI-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-QOS-CLI-MIB::rlQosPolicyClassPriorityRefTable'

This table specifies The relationship
between policy map to class map

rlQosPolicyClassPriorityRefEntry row .1.3.6.1.4.1.4526.17.88.39.1

Each entry in this table describes the connection
between class-map entry to policy map by using pointers.
The index is Class map pointer
represent by rlQosPolicyClassRefClassPointer.
It is also specifies the class-map …

Indexes

rlQosPolicyClassPriorityRefPriority rlQosPolicyClassPriorityRefClassPointer

Column Syntax OID

rlQosPolicyClassPriorityRefPriority

The class-map priority within the policy-map

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.39.1.1

rlQosPolicyClassPriorityRefClassPointer

Class-map index Pointer

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.39.1.2

rlQosPolicyClassPriorityRefPolicyPointer

Policy map index Pointer

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.39.1.3

rlQosPolicyClassPriorityRefStatus

The status of a table entry.
It is used to delete/Add an entry from this table.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.4526.17.88.39.1.4

rlQosDenyAceStatisticsTable

table

.1.3.6.1.4.1.4526.17.88.42 · 1 row entry · 2 columns

Open in standard view

Uses the netgear variant from /opt/observium/mibs/netgear.

Command help

Walk rlQosDenyAceStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-QOS-CLI-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-QOS-CLI-MIB::rlQosDenyAceStatisticsTable'

This table holds statistics for deny ACEs.

rlQosDenyAceStatisticsEntry row .1.3.6.1.4.1.4526.17.88.42.1

Each entry in this table holds number of hits for deny ACEs
attached to specific Interface.

Indexes

rlQosDenyAceStatisticsIfIndex

Column	Syntax	OID
rlQosDenyAceStatisticsIfIndex Interface Index.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.4526.17.88.42.1.1`
rlQosDenyAceStatisticsIfCounter Number of hits on deny ACEs for this interface.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.4526.17.88.42.1.2`

rlQosModeGlobalCfgTable

table

.1.3.6.1.4.1.4526.17.88.46 · 1 row entry · 7 columns

Open in standard view

Uses the netgear variant from /opt/observium/mibs/netgear.

Command help

Walk rlQosModeGlobalCfgTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-QOS-CLI-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-QOS-CLI-MIB::rlQosModeGlobalCfgTable'

This table responsible to set the global qos mode configuration:
qos mode, qos trust mode, and if port are trusted by default in qos advanced
mode.

rlQosModeGlobalCfgEntry row .1.3.6.1.4.1.4526.17.88.46.1

This table responsible to set the global qos mode configuration:
qos mode, qos trust mode, and if port are trusted by default in qos advanced
mode.
Current implemnetaion assumes only one entry exist.

Indexes

rlQosGlobalIndex

Column Syntax OID

rlQosGlobalIndex

Entry index - currenly only one entry can exist, indexes hard coded with value '1'.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.17.88.46.1.1

rlQosGlobalQoSMode

This field replaces deprecated scalar rlQosCliQosMode.
Defines the global qos operation mode: disable, basic or advnaced.

QosGlobalModer/w

Type Values:

1	disable
2	basic
3	advance

.1.3.6.1.4.1.4526.17.88.46.1.2

rlQosBasicGlobalTrustMode

This field replaces deprecated scalar rlQosCliBasicModeCfg.
Defines the global qos trust operation mode relevant for qos basic mode.

QosTrustModer/w

Type Values:

1	cos
2	dscp
3	cos-dscp

.1.3.6.1.4.1.4526.17.88.46.1.3

rlQosAdvcGlobalTrustMode

This field replaces deprecated scalar rlQosCliBasicModeCfg.
Defines the global qos trust operation mode relevant for qos advanced mode.

QosTrustModer/w

Type Values:

1	cos
2	dscp
3	cos-dscp

.1.3.6.1.4.1.4526.17.88.46.1.4

rlQoSPortTrustAdvancedMode

This field specified whether ports are set to trused or not-trusted by
default when switching to qos advanced mode.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.4526.17.88.46.1.5

rlQosDscpMutationEnable

This field indicates if dscp to dscp mutation mode is enable.
It can be set to true in the following terms:
1.rlQosGlobalTrustMode is in {dscp, vpt-dscp} ( rlQosGlobalQoSMode must be basic or advanced)
2.if rlQosGlobalQ…

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.4526.17.88.46.1.6

rlQosModeGlobalCfgStatus

This status of entry action.
In current implementation only one entry exist, therefor only status = active is
acceptable.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.4526.17.88.46.1.7

rlQosClassMapCounterTable

table

.1.3.6.1.4.1.4526.17.88.47 · 1 row entry · 1 columns

Open in standard view

Uses the netgear variant from /opt/observium/mibs/netgear.

Command help

Walk rlQosClassMapCounterTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-QOS-CLI-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-QOS-CLI-MIB::rlQosClassMapCounterTable'

The  table is used to show statistics for
ACL applied on an interface.

rlQosClassMapCounterEntry row .1.3.6.1.4.1.4526.17.88.47.1

This entry returns the value of the class map counter.
Entry is added/deleted to this MIB when counting is enabled/disabled
on the class map.
The counter is set to zero upon reading its value.

Indexes

rlQosClassMapIndex

Column	Syntax	OID
rlQosClassMapCounterValue This field returns the current value of the class map counter.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.4526.17.88.47.1.2`

rlQosApplicationTrapIdTable

table

.1.3.6.1.4.1.4526.17.88.48 · 1 row entry · 2 columns

Open in standard view

Uses the netgear variant from /opt/observium/mibs/netgear.

Command help

Walk rlQosApplicationTrapIdTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-QOS-CLI-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-QOS-CLI-MIB::rlQosApplicationTrapIdTable'

The  read only table is used to get the trapId
assisated to application wants to use the trap action in
the class map table

rlQosApplicationTrapIdEntry row .1.3.6.1.4.1.4526.17.88.48.1

This entry holds the trapId for application using the trap
action in the class map table.

Indexes

rlQosApplicationName

Column	Syntax	OID
rlQosApplicationName This field represents the application name and traffic type.	OctetString Constraints: `range: 1-32`	`.1.3.6.1.4.1.4526.17.88.48.1.1`
rlQosApplicationTrapId This field defines the trap id to be use in the class map entry.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.4526.17.88.48.1.2`

rlQosLogInputInterfacesAceMatchedTable

table

.1.3.6.1.4.1.4526.17.88.50 · 1 row entry · 6 columns

Open in standard view

Uses the netgear variant from /opt/observium/mibs/netgear.

Command help

Walk rlQosLogInputInterfacesAceMatchedTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-QOS-CLI-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-QOS-CLI-MIB::rlQosLogInputInterfacesAceMatchedTable'

This table holds a list and  of ACE matched log-input option interfaces.

rlQosLogInputInterfacesAceMatchedEntry row .1.3.6.1.4.1.4526.17.88.50.1

This table holds only one entry of port list and vlan list.

Indexes

rlQosLogInputInterfacesAceMatchedIndex

Column	Syntax	OID
rlQosLogInputInterfacesAceMatchedIndex An index is entrie's sequence.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.4526.17.88.50.1.1`
rlQosLogInputInterfacesAceMatchedPorts the matched log-input ACEs port list	Q-BRIDGE-MIBPortList	`.1.3.6.1.4.1.4526.17.88.50.1.2`
rlQosLogInputInterfacesAceMatchedVlanList1to1024 the matched log-input ACEs vlan list from 1 to 1024.	NETGEAR-RADLAN-BRIDGEMIBOBJECTS-MIBVlanList1 Type Constraints: `range: 0..128`	`.1.3.6.1.4.1.4526.17.88.50.1.3`
rlQosLogInputInterfacesAceMatchedVlanList1025to2048 the matched log-input ACEs vlan list from 1025 to 2048.	NETGEAR-RADLAN-BRIDGEMIBOBJECTS-MIBVlanList2 Type Constraints: `range: 0..128`	`.1.3.6.1.4.1.4526.17.88.50.1.4`
rlQosLogInputInterfacesAceMatchedVlanList2049to3072 the matched log-input ACEs vlan list from 2049 to 3072.	NETGEAR-RADLAN-BRIDGEMIBOBJECTS-MIBVlanList3 Type Constraints: `range: 0..128`	`.1.3.6.1.4.1.4526.17.88.50.1.5`
rlQosLogInputInterfacesAceMatchedVlanList3073to4094 the matched log-input ACEs vlan list from 3073 to 4094.	NETGEAR-RADLAN-BRIDGEMIBOBJECTS-MIBVlanList4 Type Constraints: `range: 0..128`	`.1.3.6.1.4.1.4526.17.88.50.1.6`