NETGEAR-RADLAN-PHY-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
7

rlPhyTestSetTable

table
.1.3.6.1.4.1.4526.17.90.1.1 · 1 row entry · 1 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk rlPhyTestSetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-PHY-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-PHY-MIB::rlPhyTestSetTable'
rlPhyTestSetEntry row .1.3.6.1.4.1.4526.17.90.1.1.1
An entry containing objects for invoking tests on an interface.
Indexes
Column Syntax OID
rlPhyTestSetType
A control variable used to start operator initiated interface
tests.1 indicates that no test has been initiated. Only
operator initiated interface tests can be set to this variable.
RlPhyTestTyper/w
Type Values:
1rlPhyTestTableNoTest
2rlPhyTestTableCableStatus
3rlPhyTestTableCableFault
4rlPhyTestTableCableLength
5rlPhyTestTableTransceiverTemp
6rlPhyTestTableTransceiverSupply
7rlPhyTestTableTxBias
8rlPhyTestTableTxOutput
9rlPhyTestTableRxOpticalPower
10rlPhyTestTableDataReady
11rlPhyTestTableLOS
12rlPhyTestTableTxFault
13rlPhyTestTableCableChannel1
14rlPhyTestTableCableChannel2
15rlPhyTestTableCableChannel3
16rlPhyTestTableCableChannel4
17rlPhyTestTableCablePolarity1
18rlPhyTestTableCablePolarity2
19rlPhyTestTableCablePolarity3
20rlPhyTestTableCablePolarity4
21rlPhyTestTableCablePairSkew1
22rlPhyTestTableCablePairSkew2
23rlPhyTestTableCablePairSkew3
24rlPhyTestTableCablePairSkew4
25rlPhyTestTableCableStatusFast
26rlPhyTestTableSFPEepromQualified
 .1.3.6.1.4.1.4526.17.90.1.1.1.1

rlPhyTestGetTable

table
.1.3.6.1.4.1.4526.17.90.1.2 · 1 row entry · 6 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk rlPhyTestGetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-PHY-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-PHY-MIB::rlPhyTestGetTable'
rlPhyTestGetEntry row .1.3.6.1.4.1.4526.17.90.1.2.1
An entry containing results of tests on an interface.
Indexes
Column Syntax OID
rlPhyTestGetType
A control variable used to, 1 to indicate that this test can be
done on the specified port, 2 to initiate the test whenever the
user wishes
RlPhyTestType
Type Values:
1rlPhyTestTableNoTest
2rlPhyTestTableCableStatus
3rlPhyTestTableCableFault
4rlPhyTestTableCableLength
5rlPhyTestTableTransceiverTemp
6rlPhyTestTableTransceiverSupply
7rlPhyTestTableTxBias
8rlPhyTestTableTxOutput
9rlPhyTestTableRxOpticalPower
10rlPhyTestTableDataReady
11rlPhyTestTableLOS
12rlPhyTestTableTxFault
13rlPhyTestTableCableChannel1
14rlPhyTestTableCableChannel2
15rlPhyTestTableCableChannel3
16rlPhyTestTableCableChannel4
17rlPhyTestTableCablePolarity1
18rlPhyTestTableCablePolarity2
19rlPhyTestTableCablePolarity3
20rlPhyTestTableCablePolarity4
21rlPhyTestTableCablePairSkew1
22rlPhyTestTableCablePairSkew2
23rlPhyTestTableCablePairSkew3
24rlPhyTestTableCablePairSkew4
25rlPhyTestTableCableStatusFast
26rlPhyTestTableSFPEepromQualified
 .1.3.6.1.4.1.4526.17.90.1.2.1.1
rlPhyTestGetStatus
This object contains the status of the most recently
requested test for operator initiated tests or the value
none(1) if no tests have been requested since the last
reset. For non operator initiated tests the value is a…
Enumeration
Enumerated Values:
1none
2success
3inProgress
4notSupported
5unAbleToRun
6aborted
7failed
 .1.3.6.1.4.1.4526.17.90.1.2.1.2
rlPhyTestGetResult
This object holds the test result
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.90.1.2.1.3
rlPhyTestGetUnits
The test result unit of measure. The units can be standard unit or special units
that are designed for special test.

The alaskaPhyLength unit is design for the VCT diagnostic and its values are:
less_than…
Enumeration
Enumerated Values:
1integer
2boolean
3downUP
4reverseNormal
5mdiMdix
6meter
7degree
8microVolt
9microOham
10microAmper
11microWatt
12millisecond
13alaskaPhyLength
14alaskaPhyStatus
15dbm
16decidbm
17milidbm
18abcd
19nanosecond
 .1.3.6.1.4.1.4526.17.90.1.2.1.4
rlPhyTestGetAlarm
This object hold the Alarm for this Entry. only Test that have can have alarms
use this field, other holds the Value notRelevant(1)
Enumeration
Enumerated Values:
1notRelevant
2noAlarmSet
3lowWarning
4highWarning
5lowAlarm
6highAlarm
 .1.3.6.1.4.1.4526.17.90.1.2.1.5
rlPhyTestGetTimeStamp
The time in string (formated DD-MMM-YYYY HH:MM:SS e.g
14-Apr-2002 10:33:31)
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.4526.17.90.1.2.1.6