NETGEAR-RADLAN-MNGINF-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
18

rlMngInfListTable

table
.1.3.6.1.4.1.4526.17.89.4 · 1 row entry · 8 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk rlMngInfListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-MNGINF-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-MNGINF-MIB::rlMngInfListTable' 
The table specifies all defined Access Lists definitions for IPv4 addresses.
Provide backward compatibility for previous versions.
rlMngInfListEntry row .1.3.6.1.4.1.4526.17.89.4.1
Row definition for this table.
Indexes
Column Syntax OID
rlMngInfListName
The Name of the Access List.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.4526.17.89.4.1.1
rlMngInfListPriority
The Priority value.
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.4526.17.89.4.1.2
rlMngInfListIfIndex
The IfIndex value. The IfIndex can be configured to be 0, which means don't care value.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.17.89.4.1.3
rlMngInfListIpAddr
The IP address. The IP address can be configured to be 0, which means don't care value.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.4526.17.89.4.1.4
rlMngInfListIpNetMask
The subnet mask associated with the IP address of this entry. The value of the mask is
an IP address with all the network bits set to 1 and all the hosts bits set to 0.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.4526.17.89.4.1.5
rlMngInfListService
Service type. The Service type address can be configured to be 0,
which means any of Telnet, SNMP, HTTP, HTTPS, SSH.
RlMngInfServiceTyper/w
Type Values:
0dontCare
1telnet
2snmp
3http
4https
5ssh
 .1.3.6.1.4.1.4526.17.89.4.1.6
rlMngInfListAction
Action type. Can be permit or deny.
RlMngInfActionTyper/w
Type Values:
0permit
1deny
 .1.3.6.1.4.1.4526.17.89.4.1.7
rlMngInfListRowStatus
The row status variable, used according to
row installation and removal conventions.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.4526.17.89.4.1.8

rlMngInfListInetTable

table
.1.3.6.1.4.1.4526.17.89.6 · 1 row entry · 10 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk rlMngInfListInetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-MNGINF-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-MNGINF-MIB::rlMngInfListInetTable' 
The table specifies all defined Access Lists definitions  definitions
for both IPv4 and IPv6 addresses.
rlMngInfListInetEntry row .1.3.6.1.4.1.4526.17.89.6.1
Row definition for this table.
Indexes
Column Syntax OID
rlMngInfListInetName
The Name of the Access List.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.4526.17.89.6.1.1
rlMngInfListInetPriority
The Priority value.
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.4526.17.89.6.1.2
rlMngInfListInetIfIndex
The IfIndex value. The IfIndex can be configured to be 0, which means don't care value.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.17.89.6.1.3
rlMngInfListInetIpAddrType
The Inet address type.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.4526.17.89.6.1.4
rlMngInfListInetIpAddr
The Inet address.Used for both IPv4 and IPv6 addresses.
The InetIpAddress can be configured to be 0.0.0.0 and address type IPv4 ,
which means ignored value.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.4526.17.89.6.1.5
rlMngInfListInetIpNetMask
This field will used in case of IPv4 addresses . For IPv6 this field ignored.
Default value 255.255.255.255.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.4526.17.89.6.1.6
rlMngInfListInetService
Service type. The Service type address can be configured to be 0,
which means any of Telnet, SNMP, HTTP, HTTPS, SSH.
RlMngInfServiceTyper/w
Type Values:
0dontCare
1telnet
2snmp
3http
4https
5ssh
 .1.3.6.1.4.1.4526.17.89.6.1.7
rlMngInfListInetAction
Action type. Can be permit or deny.
RlMngInfActionTyper/w
Type Values:
0permit
1deny
 .1.3.6.1.4.1.4526.17.89.6.1.8
rlMngInfListInetRowStatus
The row status variable, used according to
row installation and removal conventions.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.4526.17.89.6.1.9
rlMngInfListInetIPv6PrefixLength
IPv6 prefix length.This field provide IPv6 prefix length (mask)
for IPv6 only.In case of IPv4 this field will ignored
Integer32r/w
Constraints:
range: 0-128
 .1.3.6.1.4.1.4526.17.89.6.1.10