NETGEAR-RADLAN-COPY-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
6
Rows
6
Columns
90

rlCopyTable

table
.1.3.6.1.4.1.4526.17.87.2 · 1 row entry · 18 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk rlCopyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-COPY-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-COPY-MIB::rlCopyTable' 
The (conceptual) table listing only one entry at a time
with parameters needed for configuration
of the file copy action.
rlCopyEntry row .1.3.6.1.4.1.4526.17.87.2.1
An entry (conceptual row) in the CopyTable.
Indexes
Column Syntax OID
rlCopyIndex
The row index in the table.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.87.2.1.1
rlCopyApplicationId
The applicatione activated this comand
RlCopyApplicationType
Type Values:
1mcli
2cli
3ewb
4nms
5initerm
6serial
 .1.3.6.1.4.1.4526.17.87.2.1.2
rlCopySourceLocation
Source File Location
RlCopyLocationTyper/w
Type Values:
1local
2anotherUnit
3tftp
4xmodem
5scp
6serial
7http
8https
9http-xml
10https-xml
 .1.3.6.1.4.1.4526.17.87.2.1.3
rlCopySourceIpAddress
The Ip address of the source remote host
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.4526.17.87.2.1.4
rlCopySourceUnitNumber
The unit number of the source unit
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.87.2.1.5
rlCopySourceFileName
The name of the source file.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4526.17.87.2.1.6
rlCopySourceFileType
The type of the source file.
RlCopyFileTyper/w
Type Values:
1other
2runningConfig
3startupConfig
4backupConfig
5runningMibConfig
6startupMibConfig
7backupMibConfig
8image
9boot
10null
11logging
12mirrorConfig
13usb
 .1.3.6.1.4.1.4526.17.87.2.1.7
rlCopyDestinationLocation
Destination File Location
RlCopyLocationTyper/w
Type Values:
1local
2anotherUnit
3tftp
4xmodem
5scp
6serial
7http
8https
9http-xml
10https-xml
 .1.3.6.1.4.1.4526.17.87.2.1.8
rlCopyDestinationIpAddress
The Ip address of the destination remote host
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.4526.17.87.2.1.9
rlCopyDestinationUnitNumber
The unit number of the destination unit,
value 257 means all units
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.87.2.1.10
rlCopyDestinationFileName
The name of the destination file.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4526.17.87.2.1.11
rlCopyDestinationFileType
The type of the destination file.
RlCopyFileTyper/w
Type Values:
1other
2runningConfig
3startupConfig
4backupConfig
5runningMibConfig
6startupMibConfig
7backupMibConfig
8image
9boot
10null
11logging
12mirrorConfig
13usb
 .1.3.6.1.4.1.4526.17.87.2.1.12
rlCopyUpTime
The time elapsed since this entry was created.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.17.87.2.1.13
rlCopyOperationState
The state of the copy operation.
Enumeration
Enumerated Values:
1uploadInProgress
2downloadInProgress
3copyFailed
4copyTimedout
5copyFinished
 .1.3.6.1.4.1.4526.17.87.2.1.14
rlCopyBytesTransferred
The number of bytes that were transferred by the copy operation.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.87.2.1.15
rlCopyInBackground
When enabled the copy operation is done in the background.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.4526.17.87.2.1.16
rlCopyRowStatus
It is used to insert or delete an entry
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.4526.17.87.2.1.17
rlCopyHistoryIndex
The index of the entry corresponding to this one in the
rlCopyHistoryTable (equals rlCopyHistoryHistoryIndex).
A value of 0 indicates that no history entry should be kept
for this copy operation.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.87.2.1.18

rlCopyHistoryTable

table
.1.3.6.1.4.1.4526.17.87.4 · 1 row entry · 18 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk rlCopyHistoryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-COPY-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-COPY-MIB::rlCopyHistoryTable' 
The (conceptual) table listing only one entry at a time
with parameters needed for configuration
of the file copy action.
rlCopyHistoryEntry row .1.3.6.1.4.1.4526.17.87.4.1
An entry (conceptual row) in the rlCopyHistoryTable.
Indexes
Column Syntax OID
rlCopyHistoryHistoryIndex
The row index in the table.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.87.4.1.1
rlCopyHistoryApplicationId
The application that activated this comand
RlCopyApplicationType
Type Values:
1mcli
2cli
3ewb
4nms
5initerm
6serial
 .1.3.6.1.4.1.4526.17.87.4.1.2
rlCopyHistorySourceLocation
Source File Location
RlCopyLocationTyper/w
Type Values:
1local
2anotherUnit
3tftp
4xmodem
5scp
6serial
7http
8https
9http-xml
10https-xml
 .1.3.6.1.4.1.4526.17.87.4.1.3
rlCopyHistorySourceIpAddress
The IP address of the source remote host
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.4526.17.87.4.1.4
rlCopyHistorySourceUnitNumber
The unit number of the source unit
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.87.4.1.5
rlCopyHistorySourceFileName
The name of the source file.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4526.17.87.4.1.6
rlCopyHistorySourceFileType
The type of the source file.
RlCopyFileTyper/w
Type Values:
1other
2runningConfig
3startupConfig
4backupConfig
5runningMibConfig
6startupMibConfig
7backupMibConfig
8image
9boot
10null
11logging
12mirrorConfig
13usb
 .1.3.6.1.4.1.4526.17.87.4.1.7
rlCopyHistoryDestinationLocation
Destination File Location
RlCopyLocationTyper/w
Type Values:
1local
2anotherUnit
3tftp
4xmodem
5scp
6serial
7http
8https
9http-xml
10https-xml
 .1.3.6.1.4.1.4526.17.87.4.1.8
rlCopyHistoryDestinationIpAddress
The IP address of the destination remote host
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.4526.17.87.4.1.9
rlCopyHistoryDestinationUnitNumber
The unit number of the destination unit
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.87.4.1.10
rlCopyHistoryDestinationFileName
The name of the destination file.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4526.17.87.4.1.11
rlCopyHistoryDestinationFileType
The type of the destination file.
RlCopyFileTyper/w
Type Values:
1other
2runningConfig
3startupConfig
4backupConfig
5runningMibConfig
6startupMibConfig
7backupMibConfig
8image
9boot
10null
11logging
12mirrorConfig
13usb
 .1.3.6.1.4.1.4526.17.87.4.1.12
rlCopyHistoryUpTime
The time elapsed since this entry was created.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.17.87.4.1.13
rlCopyHistoryOperationState
The state of the copy operation.
Enumeration
Enumerated Values:
1uploadInProgress
2downloadInProgress
3copyFailed
4copyTimedout
5copyFinished
 .1.3.6.1.4.1.4526.17.87.4.1.14
rlCopyHistoryBytesTransferred
The number of bytes that were transferred by the copy operation.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.87.4.1.15
rlCopyHistoryInBackground
When enabled the copy operation is done in the background.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.4526.17.87.4.1.16
rlCopyHistoryRowStatus
It is used delete an entry. No other operations are permitted since
the history table is populated and updated through the copy table only.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.4526.17.87.4.1.17
rlCopyHistoryErrorMessage
Error message as a result of failed copy action.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4526.17.87.4.1.18

rlCopyMessagesTable

table
.1.3.6.1.4.1.4526.17.87.6 · 1 row entry · 4 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk rlCopyMessagesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-COPY-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-COPY-MIB::rlCopyMessagesTable' 
The table listing the messages issued during a COPY operation.
rlCopyMessagesEntry row .1.3.6.1.4.1.4526.17.87.6.1
An entry (conceptual row) in the rlCopyMessagesTable.
Indexes
Column Syntax OID
rlCopyMessagesCopyIndex
The index of the copy operation whose messages are displayed.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.4526.17.87.6.1.1
rlCopyMessagesMessageIndex
The index of the displayed message.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.4526.17.87.6.1.2
rlCopyMessagesMessageText
The text of the message occurred in the copy operation.
OctetString
Constraints:
range: 0-80
 .1.3.6.1.4.1.4526.17.87.6.1.3
rlCopyMessagesStatus
Only destroy is supported.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.4526.17.87.6.1.4

rlCopyInetTable

table
.1.3.6.1.4.1.4526.17.87.8 · 1 row entry · 23 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk rlCopyInetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-COPY-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-COPY-MIB::rlCopyInetTable' 
The (conceptual) table listing only one entry at a time
with parameters needed for configuration
of the file copy action.
rlCopyInetEntry row .1.3.6.1.4.1.4526.17.87.8.1
An entry (conceptual row) in the CopyTable.
Indexes
Column Syntax OID
rlCopyInetIndex
The row index in the table.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.87.8.1.1
rlCopyInetApplicationId
The applicatione activated this comand
RlCopyApplicationType
Type Values:
1mcli
2cli
3ewb
4nms
5initerm
6serial
 .1.3.6.1.4.1.4526.17.87.8.1.2
rlCopyInetSourceLocation
Source File Location
RlCopyLocationTyper/w
Type Values:
1local
2anotherUnit
3tftp
4xmodem
5scp
6serial
7http
8https
9http-xml
10https-xml
 .1.3.6.1.4.1.4526.17.87.8.1.3
rlCopyInetSourceIpAddressType
The Inet address type of the source remote host
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.4526.17.87.8.1.4
rlCopyInetSourceIpAddress
The Inet address of the source remote host
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.4526.17.87.8.1.5
rlCopyInetSourceUnitNumber
The unit number of the source unit
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.87.8.1.6
rlCopyInetSourceFileName
The name of the source file.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4526.17.87.8.1.7
rlCopyInetSourceFileType
The type of the source file.
RlCopyFileTyper/w
Type Values:
1other
2runningConfig
3startupConfig
4backupConfig
5runningMibConfig
6startupMibConfig
7backupMibConfig
8image
9boot
10null
11logging
12mirrorConfig
13usb
 .1.3.6.1.4.1.4526.17.87.8.1.8
rlCopyInetDestinationLocation
Destination File Location
RlCopyLocationTyper/w
Type Values:
1local
2anotherUnit
3tftp
4xmodem
5scp
6serial
7http
8https
9http-xml
10https-xml
 .1.3.6.1.4.1.4526.17.87.8.1.9
rlCopyInetDestinationIpAddressType
The Inet address type of the destination remote host
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.4526.17.87.8.1.10
rlCopyInetDestinationIpAddress
The Inet address of the destination remote host
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.4526.17.87.8.1.11
rlCopyInetDestinationUnitNumber
The unit number of the destination unit,
value 257 means all units
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.87.8.1.12
rlCopyInetDestinationFileName
The name of the destination file.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4526.17.87.8.1.13
rlCopyInetDestinationFileType
The type of the destination file.
RlCopyFileTyper/w
Type Values:
1other
2runningConfig
3startupConfig
4backupConfig
5runningMibConfig
6startupMibConfig
7backupMibConfig
8image
9boot
10null
11logging
12mirrorConfig
13usb
 .1.3.6.1.4.1.4526.17.87.8.1.14
rlCopyInetUpTime
The time elapsed since this entry was created.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.17.87.8.1.15
rlCopyInetOperationState
The state of the copy operation.
Enumeration
Enumerated Values:
1uploadInProgress
2downloadInProgress
3copyFailed
4copyTimedout
5copyFinished
 .1.3.6.1.4.1.4526.17.87.8.1.16
rlCopyInetBytesTransferred
The number of bytes that were transferred by the copy operation.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.87.8.1.17
rlCopyInetInBackground
When enabled the copy operation is done in the background.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.4526.17.87.8.1.18
rlCopyInetRowStatus
It is used to insert or delete an entry
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.4526.17.87.8.1.19
rlCopyInetHistoryIndex
The index of the entry corresponding to this one in the
rlCopyHistoryTable (equals rlCopyHistoryHistoryIndex).
A value of 0 indicates that no history entry should be kept
for this copy operation.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.87.8.1.20
rlCopyInetDestinationUnitList
A bitmap of destination units for copy operation.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.87.8.1.21
rlCopyInetUnitStatusList
A bitmap of copy operation status for each unit.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.87.8.1.22
rlCopyInetSpecificCopyInfo
Copy application specific information. For example: for SCP copy this
field can be used to pass username and password information.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4526.17.87.8.1.23

rlCopyHistoryInetTable

table
.1.3.6.1.4.1.4526.17.87.9 · 1 row entry · 23 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk rlCopyHistoryInetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-COPY-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-COPY-MIB::rlCopyHistoryInetTable' 
The (conceptual) table listing only one entry at a time
with parameters needed for configuration
of the file copy action.
rlCopyHistoryInetEntry row .1.3.6.1.4.1.4526.17.87.9.1
An entry (conceptual row) in the rlCopyHistoryTable.
Indexes
Column Syntax OID
rlCopyHistoryInetHistoryIndex
The row index in the table.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.87.9.1.1
rlCopyHistoryInetApplicationId
The application that activated this comand
RlCopyApplicationType
Type Values:
1mcli
2cli
3ewb
4nms
5initerm
6serial
 .1.3.6.1.4.1.4526.17.87.9.1.2
rlCopyHistoryInetSourceLocation
Source File Location
RlCopyLocationTyper/w
Type Values:
1local
2anotherUnit
3tftp
4xmodem
5scp
6serial
7http
8https
9http-xml
10https-xml
 .1.3.6.1.4.1.4526.17.87.9.1.3
rlCopyHistoryInetSourceIpAddressType
The Inet address type of the source remote host
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.4526.17.87.9.1.4
rlCopyHistoryInetSourceIpAddress
The Inet address of the source remote host
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.4526.17.87.9.1.5
rlCopyHistoryInetSourceUnitNumber
The unit number of the source unit
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.87.9.1.6
rlCopyHistoryInetSourceFileName
The name of the source file.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4526.17.87.9.1.7
rlCopyHistoryInetSourceFileType
The type of the source file.
RlCopyFileTyper/w
Type Values:
1other
2runningConfig
3startupConfig
4backupConfig
5runningMibConfig
6startupMibConfig
7backupMibConfig
8image
9boot
10null
11logging
12mirrorConfig
13usb
 .1.3.6.1.4.1.4526.17.87.9.1.8
rlCopyHistoryInetDestinationLocation
Destination File Location
RlCopyLocationTyper/w
Type Values:
1local
2anotherUnit
3tftp
4xmodem
5scp
6serial
7http
8https
9http-xml
10https-xml
 .1.3.6.1.4.1.4526.17.87.9.1.9
rlCopyHistoryInetDestinationIpAddressType
The Inet address type of the destination remote host
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.4526.17.87.9.1.10
rlCopyHistoryInetDestinationIpAddress
The Inet address of the destination remote host
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.4526.17.87.9.1.11
rlCopyHistoryInetDestinationUnitNumber
The unit number of the destination unit
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.87.9.1.12
rlCopyHistoryInetDestinationFileName
The name of the destination file.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4526.17.87.9.1.13
rlCopyHistoryInetDestinationFileType
The type of the destination file.
RlCopyFileTyper/w
Type Values:
1other
2runningConfig
3startupConfig
4backupConfig
5runningMibConfig
6startupMibConfig
7backupMibConfig
8image
9boot
10null
11logging
12mirrorConfig
13usb
 .1.3.6.1.4.1.4526.17.87.9.1.14
rlCopyHistoryInetUpTime
The time elapsed since this entry was created.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.17.87.9.1.15
rlCopyHistoryInetOperationState
The state of the copy operation.
Enumeration
Enumerated Values:
1uploadInProgress
2downloadInProgress
3copyFailed
4copyTimedout
5copyFinished
 .1.3.6.1.4.1.4526.17.87.9.1.16
rlCopyHistoryInetBytesTransferred
The number of bytes that were transferred by the copy operation.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.87.9.1.17
rlCopyHistoryInetInBackground
When enabled the copy operation is done in the background.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.4526.17.87.9.1.18
rlCopyHistoryInetRowStatus
It is used delete an entry. No other operations are permitted since
the history table is populated and updated through the copy table only.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.4526.17.87.9.1.19
rlCopyHistoryInetErrorMessage
Error message as a result of failed copy action.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4526.17.87.9.1.20
rlCopyHistoryInetDestinationUnitList
A bitmap of destination units for copy operation.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.87.9.1.21
rlCopyHistoryInetUnitStatusList
A bitmap of copy operation status for each unit.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.87.9.1.22
rlCopyHistoryInetTotalFileSize
The total length of image/static file
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.87.9.1.23

rlCopyOptionsTable

table
.1.3.6.1.4.1.4526.17.87.12 · 1 row entry · 4 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk rlCopyOptionsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-COPY-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-COPY-MIB::rlCopyOptionsTable' 
The table includes more field options for the copy operation.
rlCopyOptionsEntry row .1.3.6.1.4.1.4526.17.87.12.1
An entry (conceptual row) in the rlCopyOptionsTable.
Indexes
Column Syntax OID
rlCopyOptionsIndex
The index should be equal to the value of rlCopyInetIndex of the relevant rlCopyInetEntry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.17.87.12.1.1
rlCopyOptionsRequestedSsdAccess
The requested format for sensitive data in the copy. Relevant only for configuration file upload
RlCopySecSdAccessTyper/w
Type Values:
1exclude
2include-encrypted
3include-decrypted
4default
 .1.3.6.1.4.1.4526.17.87.12.1.2
rlCopyOptionsCheckFilePermission
Controls whether to check file permissions during copy.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.4526.17.87.12.1.3
rlCopyOptionsCheckSystemReservedStorage
Controls whether to check system reserved storage during copy.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.4526.17.87.12.1.4