NETGEAR-RADLAN-BONJOUR-MIB Table View

The table listing the service bonjour status per service and IP interface.
In order to keep the table sorted according to the customary lexicographical
order of the rlBonjourStatusServiceName strings, rlBonjourStatusServiceName
will be padded with blanks. Bonjour will truncate the padded blanks when advertising this service name.
          
Using this MIB user can monitor actual state of a service on an IP interface

rlBonjourStatusEntry row .1.3.6.1.4.1.4526.17.114.2.1

An entry in the rlBonjourStatusEntry.

Indexes

rlBonjourStatusServiceName rlBonjourStatusIPInterfaceType rlBonjourStatusIPInterfaceAddr

Column	Syntax	OID
rlBonjourStatusServiceName This variable identifies the service name.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4526.17.114.2.1.1
rlBonjourStatusIPInterfaceType This variable indicates the type of the IP interface on which the Bonjour service should be published.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.4526.17.114.2.1.2
rlBonjourStatusIPInterfaceAddr This variable indicates the address of the IP interface on which the Bonjour service should be published.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.4526.17.114.2.1.3
rlBonjourStatusState This variable identifies the service state on IP interface of the device.	RlBonjourServiceState Type Values: 0 rlBonjourNotPublished 1 rlBonjourInactive 2 rlBonjourRegistering 3 rlBonjourRunning	.1.3.6.1.4.1.4526.17.114.2.1.4

The table listing the service bonjour state per service and L2 interface.
The services that are displayed here are only those who are supported per project.
The L2 interfaces that are displayed  here are either:
     L2 interfaces with an IP on it
            OR
     L2 interfaces listed in the table below
Per each pair (service and L2 interface) table displays:
    state :
        UP   - Bonjour published the service on this L2 interface
            Not-exclude - the L2 interface has IP address (L2 interface is in UP state)
                            AND rlBonjourL2Table is empty
                            AND rlBonjourL2Mode is disable
            include - the L2 interfaces are listed in the table rlBonjourL2Table
                        AND rlBonjourL2Mode is enabled
        Down - Bonjour sent goodbye packets regarding this service on this L2 interface
            exclude - the L2 interface is a member of the rlBonjourL2Table
                      AND rlBonjourL2Mode is disable
            Not-Include - rlBonjourL2Table is empty
                          AND rlBonjourL2Mode is enable
            service disabled - service was removed due to specific request from L1 manager
            No IP address    - the L2 interfaces is listed in the table rlBonjourL2EnableTable
                               BUT don't have an IP on it
            Not-present      - the L2 interfaces is listed in the table rlBonjourL2EnableTable
                               BUT not yet defined (like vlan not created or port in an unconnected slave)
            Bonjour disabled - rlBonjourPublish scalar is off
Using this MIB user can monitor actual state of a service on an L2 interface

rlBonjourStateEntry row .1.3.6.1.4.1.4526.17.114.3.1

An entry in the rlBonjourStatusEntry.

Indexes

rlBonjourStateServiceName rlBonjourStateL2Interface

Column	Syntax	OID
rlBonjourStateServiceName This variable identifies the service name.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4526.17.114.3.1.1
rlBonjourStateL2Interface This variable indicates the L2 interface on which the Bonjour service should be published.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.4526.17.114.3.1.2
rlBonjourStateOperationMode This variable indicates whether Bonjour over IPv4 is operational on the pair (service + L2 interface).	RlBonjourOperationState Type Values: 1 up 2 down	.1.3.6.1.4.1.4526.17.114.3.1.3
rlBonjourStateOperationReason This variable specifies the reason for the value of rlBonjourStateOperationMode.	RlBonjourOperationReason Type Values: 0 notExclude 1 include 2 notInclude 3 exclude 4 bonjourDisabled 5 serviceDisabled 6 noIPaddress 7 l2InterfaceDown 8 notPresent 9 unknown	.1.3.6.1.4.1.4526.17.114.3.1.4
rlBonjourStateIPv6OperationMode This variable indicates whether Bonjour over IPv4 is operational on the pair (service + L2 interface).	RlBonjourOperationState Type Values: 1 up 2 down	.1.3.6.1.4.1.4526.17.114.3.1.5
rlBonjourStateIPv6OperationReason This variable specifies the reason for the value of rlBonjourStateIPv6OperationMode	RlBonjourOperationReason Type Values: 0 notExclude 1 include 2 notInclude 3 exclude 4 bonjourDisabled 5 serviceDisabled 6 noIPaddress 7 l2InterfaceDown 8 notPresent 9 unknown	.1.3.6.1.4.1.4526.17.114.3.1.6

The table listing the L2 interfaces on which the user wishes to
enable OR disable Bonjour with respect to rlBonjourL2Mode.
If rlBonjourL2Mode is set to include AND L2 interface is in this table
it does not ensure Bonjour WILL publish services on it.
Publication is also dependent on these fundemental conditions:
    rlBonjourPublish must be on
    at least one service should be enabled
    L2 must be present and UP
    have at least one IP on it
If this table is empty AND rlBonjourL2Mode is set to include
Bonjour won't operate at all.
If rlBonjourL2Mode is set to exclude, and rlBonjourL2Table is empty
Bonjour will be published on ALL L2 interfaces answering to the
fundemental conditions specified above.
If rlBonjourL2Table is NOT empty then Bonjour will operate on
ALL L2 interfaces answering to the fundemental conditions specified
above BUT NOT members of this list.

rlBonjourL2Entry row .1.3.6.1.4.1.4526.17.114.4.1

An entry in the rlBonjourL2Entry.

Indexes

rlBonjourL2Ifindex

Column	Syntax	OID
rlBonjourL2Ifindex This variable identifies the L2 interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.4526.17.114.4.1.1
rlBonjourL2RowStatus This variable identifies the L2 interface status manager.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4526.17.114.4.1.2