NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB Table View

A table of Auxiliary Multi-field Classifier filter entries that a
system may use to identify IP traffic.

agentDiffServAuxMfClfrEntry row .1.3.6.1.4.1.4526.10.6.1.1.2.1

An IP Multi-field Classifier entry describes a single filter.

Indexes

agentDiffServAuxMfClfrId

Column	Syntax	OID
agentDiffServAuxMfClfrId An index that enumerates the Auxiliary MultiField Classifier filter entries. Managers obtain new values for row creation in this table by reading agentDiffServAuxMfClfrNextFree.	DIFFSERV-MIBIndexInteger Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.4526.10.6.1.1.2.1.1
agentDiffServAuxMfClfrDstAddr The IP address to match against the packet's destination IP address.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.4526.10.6.1.1.2.1.2
agentDiffServAuxMfClfrDstMask This mask value identifies the portion of agentDiffServAuxMfClfrDstAddr that is compared against a packet. A non-contiguous mask value is permitted. A mask of 0 indicates a match of any address.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.4526.10.6.1.1.2.1.3
agentDiffServAuxMfClfrSrcAddr The IP address to match against the packet's source IP address.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.4526.10.6.1.1.2.1.4
agentDiffServAuxMfClfrSrcMask This mask value identifies the portion of agentDiffServAuxMfClfrSrcAddr that is compared against a packet. A non-contiguous mask value is permitted. A mask of 0 indicates a match of any address.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.4526.10.6.1.1.2.1.5
agentDiffServAuxMfClfrProtocol The IP protocol to match against the IPv4 protocol number. A value of 255 means match all.	Unsigned32r/w Constraints: range: 0-255	.1.3.6.1.4.1.4526.10.6.1.1.2.1.6
agentDiffServAuxMfClfrDstL4PortMin The minimum value that the layer-4 destination port number in the packet must have in order to match this classifier entry.	INET-ADDRESS-MIBInetPortNumberr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.4526.10.6.1.1.2.1.7
agentDiffServAuxMfClfrDstL4PortMax The maximum value that the layer-4 destination port number in the packet must have in order to match this classifier entry. This value must be equal to or greater than the value specified for this entry in agentDiffSe…	INET-ADDRESS-MIBInetPortNumberr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.4526.10.6.1.1.2.1.8
agentDiffServAuxMfClfrSrcL4PortMin The minimum value that the layer-4 source port number in the packet must have in order to match this classifier entry.	INET-ADDRESS-MIBInetPortNumberr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.4526.10.6.1.1.2.1.9
agentDiffServAuxMfClfrSrcL4PortMax The maximum value that the layer-4 source port number in the packet must have in order to match this classifier entry. This value must be equal to or greater than the value specified for this entry in diffServMultiField…	INET-ADDRESS-MIBInetPortNumberr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.4526.10.6.1.1.2.1.10
agentDiffServAuxMfClfrCos Three-bit user priority field in the 802.1Q tag header of a tagged Ethernet frame used as a class-match parameter. For frames containing a double VLAN tag, this field is located in the first/outer tag. A value of -1…	CosOrAnyr/w Type Constraints: range: -1..7	.1.3.6.1.4.1.4526.10.6.1.1.2.1.11
agentDiffServAuxMfClfrTos IP TOS bits value, defined as all eight bits of the Service Type octet in the IPv4 header. There are multiple, overlapping, meanings of the TOS octet in use today: Precedence (bits 7-5): IP Precedenc…	OctetStringr/w Constraints: range: 1-1	.1.3.6.1.4.1.4526.10.6.1.1.2.1.12
agentDiffServAuxMfClfrTosMask IP TOS bits mask value. It identifies the portion of agentDiffServAuxMfClfrTos that is compared against a packet. A non-contiguous mask value is permitted. A mask of 0 indicates a match of any TOS value. …	OctetStringr/w Constraints: range: 1-1	.1.3.6.1.4.1.4526.10.6.1.1.2.1.13
agentDiffServAuxMfClfrDstMac Destination MAC address.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.4526.10.6.1.1.2.1.14
agentDiffServAuxMfClfrDstMacMask Destination MAC address mask value. This mask value identifies the portion of agentDiffServAuxMfClfrDstMac that is compared against a packet. A non-contiguous mask value is permitted. A mask of 0 indicates a match of …	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.4526.10.6.1.1.2.1.15
agentDiffServAuxMfClfrSrcMac Source MAC address.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.4526.10.6.1.1.2.1.16
agentDiffServAuxMfClfrSrcMacMask Source MAC address mask value. This mask value identifies the portion of agentDiffServAuxMfClfrSrcMac that is compared against a packet. A non-contiguous mask value is permitted. A mask of 0 indicates a match of any M…	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.4526.10.6.1.1.2.1.17
agentDiffServAuxMfClfrVlanIdobsolete VLAN ID value for the classifier. A value of -1 indicates that a specific VLAN ID value has not been defined and thus all VLAN ID values are considered a match.	VlanIdOrAnyr/w Type Constraints: range: -1 range: 1..4094	.1.3.6.1.4.1.4526.10.6.1.1.2.1.18
agentDiffServAuxMfClfrStorage The storage type for this conceptual row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.4526.10.6.1.1.2.1.19
agentDiffServAuxMfClfrStatus The status of this conceptual row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4526.10.6.1.1.2.1.20
agentDiffServAuxMfClfrCos2 Three-bit user priority field in the second/inner 802.1Q tag header of a double VLAN tagged Ethernet frame used as a class-match parameter A value of -1 indicates that a specific Secondary COS value has not been defi…	CosOrAnyr/w Type Constraints: range: -1..7	.1.3.6.1.4.1.4526.10.6.1.1.2.1.21
agentDiffServAuxMfClfrEtypeVal1 Ethertype value to be compared in order to match this classifier entry. The allowed value for this object is 0x0600 to 0xFFFF, with a value of 0 used to indicate this object is not involved in the classifier entry.	EtypeOrAnyr/w Type Constraints: range: 0 range: 1536..65535	.1.3.6.1.4.1.4526.10.6.1.1.2.1.22
agentDiffServAuxMfClfrEtypeVal2 A second Ethertype value to be compared in order to match this classifier entry. This value is considered in addition to the value specified by agentDiffServAuxMfClfrEtypeVal1 and serves as a second possible match va…	EtypeOrAnyr/w Type Constraints: range: 0 range: 1536..65535	.1.3.6.1.4.1.4526.10.6.1.1.2.1.23
agentDiffServAuxMfClfrVlanIdMin The minimum value that the VLAN ID in the packet must have in order to match this classifier entry. This field is defined as the 12-bit VLAN identifier in the 802.1Q tag header of a tagged Ethernet frame. For a doubl…	Unsigned32r/w Constraints: range: 1-4094	.1.3.6.1.4.1.4526.10.6.1.1.2.1.24
agentDiffServAuxMfClfrVlanIdMax The maximum value that the VLAN ID in the packet must have in order to match this classifier entry. This field is defined as the 12-bit VLAN identifier in the 802.1Q tag header of a tagged Ethernet frame. For a doubl…	Unsigned32r/w Constraints: range: 1-4094	.1.3.6.1.4.1.4526.10.6.1.1.2.1.25
agentDiffServAuxMfClfrVlanId2Min The minimum value that the Secondary VLAN ID in the packet must have in order to match this classifier entry. This field is defined as the 12-bit VLAN identifier in the second/inner 802.1Q tag header of a double VLAN …	Unsigned32r/w Constraints: range: 1-4094	.1.3.6.1.4.1.4526.10.6.1.1.2.1.26
agentDiffServAuxMfClfrVlanId2Max The maximum value that the Secondary VLAN ID in the packet must have in order to match this classifier entry. This field is defined as the 12-bit VLAN identifier in the second/inner 802.1Q tag header of a double VLAN t…	Unsigned32r/w Constraints: range: 1-4094	.1.3.6.1.4.1.4526.10.6.1.1.2.1.27

This table enumerates specific Class of Service values used for marking
or remarking the priority bits in the 802.1p header. The entries of this 
table may be referenced by a diffServActionSpecific attribute.

agentDiffServCosMarkActEntry row .1.3.6.1.4.1.4526.10.6.1.2.2.1

An entry in the COS mark action table that describes a
single Class of Service value used for marking.

Indexes

agentDiffServCosMarkActCos

Column	Syntax	OID
agentDiffServCosMarkActCos The Class of Service value that this Action will store into the priority bits of the 802.1p header. It is quite possible that the only packets subject to this Action are already marked with this COS value.	Cos Type Constraints: range: 0..7	.1.3.6.1.4.1.4526.10.6.1.2.2.1.1

This table enumerates specific IP Precedence values used for marking
or remarking the Precedence field of IP packets. The entries of this 
table may be referenced by a diffServActionSpecific attribute.

agentDiffServIpPrecMarkActEntry row .1.3.6.1.4.1.4526.10.6.1.2.4.1

An entry in the IP Precedence mark action table that describes a
single IP Precedence value used for marking.

Indexes

agentDiffServIpPrecMarkActPrecedence

Column	Syntax	OID
agentDiffServIpPrecMarkActPrecedence The IP Precedence that this Action will store into the Precedence field of the IP packet. It is quite possible that the only packets subject to this Action are already marked with this IP Precedence. Note also that Di…	IpPrecedence Type Constraints: range: 0..7	.1.3.6.1.4.1.4526.10.6.1.2.4.1.1

This table enumerates specific Secondary Class of Service values used for marking
or remarking the priority bits in the second/inner 802.1Q tag header of a double VLAN
tagged Ethernet packet.  The entries of this table may be referenced by 
a diffServActionSpecific attribute.

agentDiffServCos2MarkActEntry row .1.3.6.1.4.1.4526.10.6.1.2.5.1

An entry in the Secondary COS mark action table that describes a
single Class of Service value used for marking.

Indexes

agentDiffServCos2MarkActCos

Column	Syntax	OID
agentDiffServCos2MarkActCos The Secondary Class of Service value that this Action will store into the priority bits of the second/inner 802.1p tag header. It is quite possible that the only packets subject to this Action are already marked with th…	Cos Type Constraints: range: 0..7	.1.3.6.1.4.1.4526.10.6.1.2.5.1.1

A table used for assigning a stream of Differentiated Services
traffic to a specific quality of service (QoS) queue. 
The traffic stream is identified by the upstream Functional 
Data Path Element(s), i.e. by the object(s) that point
to each entry in this table.  This may include all traffic on an
interface or just a portion thereof.

agentDiffServAssignQueueEntry row .1.3.6.1.4.1.4526.10.6.1.2.7.1

An entry in the assign queue table describes a specific (egress)
QoS queue identifier for a traffic stream.

Indexes

agentDiffServAssignQueueIndex

Column	Syntax	OID
agentDiffServAssignQueueIndex An index that enumerates the Assign Queue entries. Managers obtain new values for row creation in this table by reading agentDiffServAssignQueueNextFree.	DIFFSERV-MIBIndexInteger Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.4526.10.6.1.2.7.1.1
agentDiffServAssignQueueQnum The queue identifier value. This value indicates the QoS queue number to which the traffic stream for this data path is directed for egress from the device.	Unsigned32r/w Constraints: range: 0-7	.1.3.6.1.4.1.4526.10.6.1.2.7.1.2
agentDiffServAssignQueueStorage The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.4526.10.6.1.2.7.1.3
agentDiffServAssignQueueStatus The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one or more RowPointers pointing to it results in destruction bei…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4526.10.6.1.2.7.1.4

A table used for redirecting a stream of Differentiated Services
traffic to a specific egress interface, bypassing any normal
device forwarding decision.  The traffic stream is identified by 
the upstream Functional Data Path Element(s), i.e. by the object(s) 
that point to each entry in this table.  This may include all traffic
on an interface or just a portion thereof.

agentDiffServRedirectEntry row .1.3.6.1.4.1.4526.10.6.1.2.9.1

An entry in the redirect table describes a specific external
interface number used as the egress point of a traffic stream.

Indexes

agentDiffServRedirectId

Column	Syntax	OID
agentDiffServRedirectId An index that enumerates the Redirect entries. Managers obtain new values for row creation in this table by reading agentDiffServRedirectNextFree.	DIFFSERV-MIBIndexInteger Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.4526.10.6.1.2.9.1.1
agentDiffServRedirectIntf The external interface number identifier value. This value indicates the egress interface to which the traffic stream for this data path is directed. Normal traffic forwarding decisions are bypassed.	IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.4526.10.6.1.2.9.1.2
agentDiffServRedirectStorage The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.4526.10.6.1.2.9.1.3
agentDiffServRedirectStatus The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one or more RowPointers pointing to it results in destruction bei…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4526.10.6.1.2.9.1.4

A table used for mirroring a stream of Differentiated Services
traffic to a specific egress interface, in addition to any normal
device forwarding decision.  The traffic stream is identified by 
the upstream Functional Data Path Element(s), i.e. by the object(s) 
that point to each entry in this table.  This may include all traffic
on an interface or just a portion thereof.

agentDiffServMirrorEntry row .1.3.6.1.4.1.4526.10.6.1.2.11.1

An entry in the mirror table describes a specific external
interface number used as the egress point of a copied traffic
stream.

Indexes

agentDiffServMirrorId

Column	Syntax	OID
agentDiffServMirrorId An index that enumerates the Mirror entries. Managers obtain new values for row creation in this table by reading agentDiffServMirrorNextFree.	DIFFSERV-MIBIndexInteger Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.4526.10.6.1.2.11.1.1
agentDiffServMirrorIntf The external interface number identifier value. This value indicates the egress interface to which the traffic stream for this data path is copied. Normal traffic forwarding decisions are still performed on the traff…	IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.4526.10.6.1.2.11.1.2
agentDiffServMirrorStorage The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.4526.10.6.1.2.11.1.3
agentDiffServMirrorStatus The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one or more RowPointers pointing to it results in destruction bei…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4526.10.6.1.2.11.1.4

A table used for augmenting the Differentiated Services
meter information with information describing the packet coloration
characteristics for a color-aware mode of policing.  The 
diffServMeterId is used as the index to this table,
which logically extends the Meter table row with the columnar
objects defined in this Color Aware table row.

agentDiffServColorAwareEntry row .1.3.6.1.4.1.4526.10.6.1.3.1.1

An entry in the color aware table describes a single color conformance
level of a meter.

Indexes

No indexes recorded

Column	Syntax	OID
agentDiffServColorAwareLevel The metering conformance level of this table entry. A policing meter represents either a conforming or an exceeding level of traffic in the traffic stream for this data path. The color characteristics used by the mete…	Enumerationr/w Enumerated Values: 1 conform 2 exceed 3 unused	.1.3.6.1.4.1.4526.10.6.1.3.1.1.1
agentDiffServColorAwareMode The color mode indicator for the meter. When set to blind(1), metering is performed in a color-blind manner such that any packet markings are ignored by the meter. The other values listed for this object indicate t…	Enumerationr/w Enumerated Values: 1 blind 2 awarecos 3 awarecos2 4 awareipdscp 5 awareipprec 6 awareunused	.1.3.6.1.4.1.4526.10.6.1.3.1.1.2
agentDiffServColorAwareValue The value of the color aware table entry. This value is used to compare the field indicated in agentDiffServColorAwareMode against packets in a traffic stream along the data path supplying the meter for a given confor…	Unsigned32r/w Constraints: range: 0-63	.1.3.6.1.4.1.4526.10.6.1.3.1.1.3