NBASE-G1-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
17
Rows
17
Columns
73

nbsSysTrapTable

table mandatory
.1.3.6.1.4.1.629.1.3.12 · 1 row entry · 4 columns
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk nbsSysTrapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NBASE-G1-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NBASE-G1-MIB::nbsSysTrapTable'
A table of managers to whom will the traps generated by the
SNMP agent will be sent.
It represents the current operational table as well as the
NVRAM saved table. The entries in the table are saved over
system resets and power up cycles
nbsSysTrapEntry row .1.3.6.1.4.1.629.1.3.12.1
Contains the information necessary to generate a trap to be
sent to a particular manager.

The object nbsSysTrapTblEntStatus, when written is used to
create or delete an entry/row in nbsSysTrapTable. To crea…
Column Syntax OID
The index of the entry/row in the trap table in the range
1 to the value of nbsSysTrapTblMaxSize.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.629.1.3.12.1.1
This object is used to get/set the validity of the
information contained by nbsSysTrapEntry row.

Setting this object to the value invalid(1) has the effect of
deleting the corresponding entry in the nbsSy…
Enumerationr/w
Enumerated Values:
1invalid
2active
.1.3.6.1.4.1.629.1.3.12.1.2
IP Address of a manager that is to receive the SNMP agent
generated traps
RFC1155-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.629.1.3.12.1.3
Community string used by the SNMP agent in the traps
generated
RFC1213-MIBDisplayStringr/w .1.3.6.1.4.1.629.1.3.12.1.4

nbsPortCfgTable

table mandatory
.1.3.6.1.4.1.629.1.4.1 · 1 row entry · 11 columns
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk nbsPortCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NBASE-G1-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NBASE-G1-MIB::nbsPortCfgTable'
A list of the port configurations entries. The number of
entries is given by nbsSysPortsNumber
nbsPortCfgEntry row .1.3.6.1.4.1.629.1.4.1.1
Contains the information necessary to configure/describe a
port configuration. The number of rows/entries is fixed. A
row/entry may not be created or deleted
Indexes
Column Syntax OID
A unique value for each switched port. Its value ranges from
1 to the value of nbsSysPortsNumber.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.629.1.4.1.1.1
The port LAN type that is installed (if exists).
Enumeration
Enumerated Values:
1none
2eth10
3eth100
4eth10or100
5eth100B
6eth1000B
7atmLane
8eth100Grp
9eth10or100Grp
10fddi
11eth100or1000
12eth10hpna
13eth100or1000amp
14eth10or100overVDSL
15ethSFP
16eth10or100or1000
30ethSFP100
40ethXFP
50ethComboDualMode
51ethComboTriMode
.1.3.6.1.4.1.629.1.4.1.1.2
The port physical interface that is installed (if any).
Enumeration
Enumerated Values:
1aui
2tp
3auiTp
4tpfd
5coax
6foMm
7foSm
8none
9foSxM
10foLxM
11foLxS1
12foLxS2
13foLxS3
14foM
15foMX
16foS1
17foS2
18foS3
19foLxS4
20foLxS5
21foS4
22foS5
23foM10
24foGMX
25foS1A
26foPAL
.1.3.6.1.4.1.629.1.4.1.1.3
The port physical interface type selection.
For regular 10 Mbps Ethernet Ports, the default value
is Auto Select.
100 Base-Tx ports do not support more than one type of
physical interface.
Setting a not supported type o…
Enumerationr/w
Enumerated Values:
1other
2aui
3tp
4asel
.1.3.6.1.4.1.629.1.4.1.1.4
The link integrity status. This object is rellevant
for a port of type Twisted Pair or Fiber Optic,
10 or 100 Mbps
Enumeration
Enumerated Values:
1other
2enable
3disable
.1.3.6.1.4.1.629.1.4.1.1.5
The port flow control mode selection: enable (default )
or disable
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.629.1.4.1.1.6
The port dplex mode selection: halfDuplex(1) - default
or fullDuplex(2)
Enumerationr/w
Enumerated Values:
1halfDuplex
2fullDuplex
.1.3.6.1.4.1.629.1.4.1.1.7
The port forwarding delay expressed in bytes, with an
acceptable range of 6..64 bytes. The default is 64 bytes.
This object is supported only by the NH204-AT device
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.629.1.4.1.1.8
The Ethernet Port speed selection in the case of a
different 'nbsPortCfgLanType' Ethernet ports.
Enumerationr/w
Enumerated Values:
1autoSense
2force10
3force100
4force1000
5force10000
.1.3.6.1.4.1.629.1.4.1.1.9
Port Enable/Disable
Enumerationr/w
Enumerated Values:
1portDisable
2portEnable
.1.3.6.1.4.1.629.1.4.1.1.10
The Inter-Switch Virtual Mode of this port. nonIsvp(3)
means the port does not support this mode of operation.
Access(1) means the port is in Access mode. Trunk(2) means
the port is in Trunk mode.
Enumerationr/w
Enumerated Values:
1access
2trunk
3nonIsvp
.1.3.6.1.4.1.629.1.4.1.1.11

nbsPortGrpCfgTable

table mandatory
.1.3.6.1.4.1.629.1.4.3 · 1 row entry · 5 columns
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk nbsPortGrpCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NBASE-G1-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NBASE-G1-MIB::nbsPortGrpCfgTable'
A list of the port configurations entries. The number of
entries is given by nbsSysPortsNumber
nbsPortGrpCfgEntry row .1.3.6.1.4.1.629.1.4.3.1
Contains the information necessary to configure/describe a
port configuration. The number of rows/entries is fixed. A
row/entry may not be created or deleted
Column Syntax OID
A unique value for each switched port. Its value ranges from
1 to 32.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.629.1.4.3.1.1
number of groups
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.629.1.4.3.1.2
number of ports in group
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.629.1.4.3.1.3
The link status of the port
Enumeration
Enumerated Values:
1linkOff
2linkOn
.1.3.6.1.4.1.629.1.4.3.1.4
The port activity
Enumeration
Enumerated Values:
1nonActivity
2activity
.1.3.6.1.4.1.629.1.4.3.1.5

nbsEthInfoTable

table mandatory
.1.3.6.1.4.1.629.1.5.1 · 1 row entry · 3 columns
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk nbsEthInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NBASE-G1-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NBASE-G1-MIB::nbsEthInfoTable'
A list of the port NBase specific Ethernet Statistics.
Number of entries is given by nbsSysPortsNumber
nbsEthInfoEntry row .1.3.6.1.4.1.629.1.5.1.1
Contains the NBase specific Ethernet Statistics for a port.
The number of rows/entries is fixed. A row/entry may not be
created or deleted
Indexes
Column Syntax OID
A unique value for each switched port. Its value ranges from
1 to the value of nbsSysPortsNumber.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.629.1.5.1.1.1
Number of times the flow control mechanism was activated
on the specified input port, due to a full buffer on the
output port. The number is correct if the flow control
mechanism is enabled
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.629.1.5.1.1.2
Number of times the flow control mechanism was activated
unsuccessfull 15 times. The number is correct if the
flow control mechanism is enabled
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.629.1.5.1.1.3

nbsSwitchPerfTable

table mandatory
.1.3.6.1.4.1.629.1.6.1 · 1 row entry · 3 columns
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk nbsSwitchPerfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NBASE-G1-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NBASE-G1-MIB::nbsSwitchPerfTable'
A list of NBase port specific performance statistics.
Number of entries is given by nbsSysPortsNumber
nbsSwitchPerfEntry row .1.3.6.1.4.1.629.1.6.1.1
Contains the NBase specific Ethernet Statistics for a port.
The number of rows/entries is fixed. A row/entry may not be
created or deleted
Column Syntax OID
A unique value for each switched port. Its value ranges from
1 to the value of nbsSysPortsNumber.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.629.1.6.1.1.1
Number of Multicast packets received by the switching entity
on this port
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.629.1.6.1.1.2
Number of packets received by the switching entity
on this port with unknown destination port. As a result
these packets were forwarded to all the switch other
ports - flooding
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.629.1.6.1.1.3

nbsPortFwdPerfTable

table mandatory
.1.3.6.1.4.1.629.1.6.2 · 1 row entry · 4 columns
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk nbsPortFwdPerfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NBASE-G1-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NBASE-G1-MIB::nbsPortFwdPerfTable'
A list of the NBase port specific switching performance
statistics. Contains the number of packets and bytes
forwarded from nbsPortFwdPerfInPort to all other
nbsPortFwdPerfOutPort, including itself.
Number of entries is given by nbsSysPortsNumber
nbsPortFwdPerfEntry row .1.3.6.1.4.1.629.1.6.2.1
Contains the NBase specific Switching Performance statistics
for a port. Contains the number of packets and bytes
forwarded from nbsPortFwdPerfInPort to all other
nbsPortFwdPerfOutPort, including itself.
The number of r…
Column Syntax OID
A unique value for each switched port. Its value ranges from
1 to the value of nbsSysPortsNumber.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.629.1.6.2.1.1
A unique value for each switched port. Its value ranges from
1 to the value of nbsSysPortsNumber.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.629.1.6.2.1.2
Number of packets forwarded by the switching entity
from nbsPortFwdPerfInPort to nbsPortFwdPerfoutPort
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.629.1.6.2.1.3
Number of packets forwarded by the switching entity
from nbsPortFwdPerfInPort to nbsPortFwdPerfoutPort
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.629.1.6.2.1.4

nbsMgmtRcvPerfTable

table mandatory
.1.3.6.1.4.1.629.1.6.4 · 1 row entry · 3 columns
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk nbsMgmtRcvPerfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NBASE-G1-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NBASE-G1-MIB::nbsMgmtRcvPerfTable'
A list of the NBase port specific switching performance
statistics. Contains the number of packets and bytes
forwarded to the Management Port from all the
nbsMgmtRcvPerfOutPort ports.
Number of entries is given by nbsSysPortsNumber
nbsMgmtRcvPerfEntry row .1.3.6.1.4.1.629.1.6.4.1
Contains the NBase specific Switching Performance statistics
for a port. Contains the number of packets and bytes
forwarded to the Management Port from all the
nbsMgmtRcvPerfOutPort ports.
The number of rows/entries is …
Column Syntax OID
A unique value for each switched port. Its value ranges from
1 to the value of nbsSysPortsNumber.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.629.1.6.4.1.2
Number of packets forwarded by the switching entity
to the Managemnt Port from nbsMgmtRcvPerfOutPort.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.629.1.6.4.1.3
Number of bytes forwarded by the switching entity
to the Managemnt Port from nbsMgmtRcvPerfOutPort.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.629.1.6.4.1.4

nbsMgmtXmtPerfTable

table mandatory
.1.3.6.1.4.1.629.1.6.5 · 1 row entry · 3 columns
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk nbsMgmtXmtPerfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NBASE-G1-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NBASE-G1-MIB::nbsMgmtXmtPerfTable'
A list of the NBase port specific switching performance
statistics. Contains the number of packets and bytes
forwarded from the Management Port to all the
nbsMgmtXmtPerfOutPort ports.
Number of entries is given by nbsSysPortsNumber
nbsMgmtXmtPerfEntry row .1.3.6.1.4.1.629.1.6.5.1
Contains the NBase specific Switching Performance statistics
for a port. Contains the number of packets and bytes
forwarded from the Management Port to all the
nbsMgmtXmtPerfOutPort ports.
The number of rows/entries is …
Column Syntax OID
A unique value for each switched port. Its value ranges from
1 to the value of nbsSysPortsNumber.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.629.1.6.5.1.2
Number of packets forwarded by the switching entity
from the Managemnt Port to nbsMgmtXmtPerfOutPort.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.629.1.6.5.1.3
Number of bytes forwarded by the switching entity
from the Managemnt Port to nbsMgmtXmtPerfOutPort.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.629.1.6.5.1.4

nbsMegaSwRunDbTable

table mandatory
.1.3.6.1.4.1.629.1.9.1.1 · 1 row entry · 5 columns
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk nbsMegaSwRunDbTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NBASE-G1-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NBASE-G1-MIB::nbsMegaSwRunDbTable'
A list of the current running Learn Table entries.
Number of entries is given by nbsSysSwitchDBSize
nbsMegaSwRunDbEntry row .1.3.6.1.4.1.629.1.9.1.1.1
Contains the NBase specific Learn Table entry information.
The information is specific to a MAC Address.
The number of rows/entries is fixed. A row/entry may not be
created or deleted
Column Syntax OID
A unique value for each Current Switching Data Base Entry.
Its value ranges from 1 to the value of nbsSysSwitchDBSize
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.629.1.9.1.1.1.1
This object indicates the status of this entry.
The default value is deleteOnTimeout(4).

invalid(1) - this value indicates a inactive entry.
The entry may receive this value either
through a manag…
Enumeration
Enumerated Values:
1invalid
2system
3permanent
4deleteOnReset
5deleteOnTimeout
.1.3.6.1.4.1.629.1.9.1.1.1.2
The destination MAC Address in a frame to which this entry
forwarding information applies. This object can take the
value of a unicast address, a group address or the
broadcast address.
MacAddress
Type Constraints:
range: 6
.1.3.6.1.4.1.629.1.9.1.1.1.3
This object indicates the type of the entry and its adjacent
filter.
The default value is VirtualFilter(1).

virtualFilter(1) - this entry was either learned by the
switch or was manually added t…
Enumeration
Enumerated Values:
1virtualFilter
2customFilter
.1.3.6.1.4.1.629.1.9.1.1.1.4
The port to which a frame containing the entry Mac Address
should be forwarded, if it is not overwritten by a Virtual
Filter. This object is rellevant for virtualFilter(1) type
of entries only
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.629.1.9.1.1.1.5

nbsMegaSwRunFilterTable

table mandatory
.1.3.6.1.4.1.629.1.9.1.2 · 1 row entry · 6 columns
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk nbsMegaSwRunFilterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NBASE-G1-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NBASE-G1-MIB::nbsMegaSwRunFilterTable'
The Switching Data Base :
a list of destination filters associated with each
MAC Address in the Switching Data Base. A destination
filter exists for every possible input port.
Number of entries is given by nbsSysPortsNumber plus
one for the management port. Legal number of entries
are 9 for NH208-AT , 16 for NH215-AT and 8 for NH2007
nbsMegaSwRunFilterEntry row .1.3.6.1.4.1.629.1.9.1.2.1
Contains the destination filter associated with a MAC Address
in the Switching Data Base, when the packet was inputed
through nbsMegaSwRunFilterSport port.
Column Syntax OID
This object indicates the status of this entry.
The default value is deleteOnTimeout(4).

invalid(1) - this value indicates a inactive entry.
The entry may receive this value either
through a manag…
Enumerationr/w
Enumerated Values:
1invalid
2system
3permanent
4deleteOnReset
5deleteOnTimeout
.1.3.6.1.4.1.629.1.9.1.2.1.1
The destination MAC Address in a frame to which this entry
forwarding information applies. This object can take the
value of a unicast address, a group address or the
broadcast address. This is the same as the nbsMegaSw…
MacAddressr/w
Type Constraints:
range: 6
.1.3.6.1.4.1.629.1.9.1.2.1.2
This object indicates the type of the entry and its adjacent
filter.
The default value is VirtualFilter(1).

virtualFilter(1) - this entry was either learned by the
switch or was manually added t…
Enumerationr/w
Enumerated Values:
1virtualFilter
2customFilter
.1.3.6.1.4.1.629.1.9.1.2.1.3
The port to which a frame containing the entry Mac Address
would be forwarded, if it is not overwritten by a Virtual
Filter. This object is rellevant for virtualFilter(1) type
of entries only
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.629.1.9.1.2.1.4
A unique value that shows for which input/source port
the adjacent filter/dport map should be used.
At creation time this object should not be given the
value 0. It's range should be 1 to the number of ports
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.629.1.9.1.2.1.5
The Destination Port Bit Map = the set of ports
to which the incoming packet is to be forwarded.
Each octet within the value of this object specifies
a set of eight ports, with the first octet specifying
ports 0 through…
OctetStringr/w .1.3.6.1.4.1.629.1.9.1.2.1.6

nbsMegaSwSvlanConnectTable

table mandatory
.1.3.6.1.4.1.629.1.9.1.3 · 1 row entry · 2 columns
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk nbsMegaSwSvlanConnectTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NBASE-G1-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NBASE-G1-MIB::nbsMegaSwSvlanConnectTable'
A set of octet strings/filters showing the
Virtual LANs Connectivity Matrix.
A filter exists for every possible input port.
Number of entries is given by nbsSysPortsNumber plus
one for the management port. Legal number of entries
are 9 for NH208-AT, 16 for NH215-AT and 8 for NH2007
nbsMegaSwSvlanConnectEntry row .1.3.6.1.4.1.629.1.9.1.3.1
Contains the destination filter associated with
the input port nbsMegaSwSvlanConnectSport.
Column Syntax OID
A unique value that shows for which input/source port
the adjacent filter/dport map should be used.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.629.1.9.1.3.1.1
The Destination Port Bit Map = the set of ports
to which the incoming packet is to be forwarded.
Each octet within the value of this object specifies
a set of eight ports, with the first octet specifying
ports 1 through…
OctetString .1.3.6.1.4.1.629.1.9.1.3.1.2

nbsMegaSwRunSvlanTable

table mandatory
.1.3.6.1.4.1.629.1.9.1.4.2 · 1 row entry · 4 columns
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk nbsMegaSwRunSvlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NBASE-G1-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NBASE-G1-MIB::nbsMegaSwRunSvlanTable'
A list of the current Security Virtual LANs defined.
Number of entries is given by nbsMegaSwRunSvlanMaxNum
nbsMegaSwRunSvlanEntry row .1.3.6.1.4.1.629.1.9.1.4.2.1
Contains the descriptor of a Security Virtual LAN.
Column Syntax OID
The serial number of this entry in the nbsMegaSwRunSvlanTbl.
It may range from 1 to the value of nbsMegaSwRunSvlanMaxNum.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.629.1.9.1.4.2.1.1
The object is used to create/delete entries in the
nbsMegaSwRunSvlanTable table.

Setting this value to invalid(2) for a certain
nbsMegaSwRunSvlanIndex, deletes this entry.

To create a new e…
Enumerationr/w
Enumerated Values:
1valid
2invalid
.1.3.6.1.4.1.629.1.9.1.4.2.1.2
Contains the list of the ports grouped together in this
Security Virtual LAN. The representation is a bit map.
Each octet within the value of this object specifies
a set of eight ports, with the first octet specifying
p…
OctetStringr/w .1.3.6.1.4.1.629.1.9.1.4.2.1.3
This object indicates if this 'intra-switch' VLAN
entry was added by defining an inter-switch VLAN.
The entries that have this flag TRUE may not be
edited using this access.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.629.1.9.1.4.2.1.4

nbsMegaSwRunIsvlanTable

table mandatory
.1.3.6.1.4.1.629.1.9.1.4.4 · 1 row entry · 6 columns
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk nbsMegaSwRunIsvlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NBASE-G1-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NBASE-G1-MIB::nbsMegaSwRunIsvlanTable'
A list of the current InetrSwitch Security Virtual LANs
defined. Number of entries is given by nbsMegaSwRunSvlanMaxNum
nbsMegaSwRunIsvlanEntry row .1.3.6.1.4.1.629.1.9.1.4.4.1
Contains the descriptor of a InterSwitch Security Virtual LAN.
Column Syntax OID
The serial number of this entry in the nbsMegaSwRunIsvlanTbl.
It may range from 1 to the value of nbsMegaSwRunIsvlanMaxNum.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.629.1.9.1.4.4.1.1
The object is used to create/delete entries in the
nbsMegaSwRunIsvlanTable table.

Setting this value to invalid(2) for a certain
nbsMegaSwRunIsvlanIndex, deletes this entry.

To create a new…
Enumerationr/w
Enumerated Values:
1valid
2invalid
3mcast
.1.3.6.1.4.1.629.1.9.1.4.4.1.2
Contains the list of the ports grouped together in this
Security Virtual LAN. The representation is a bit map.
Each octet within the value of this object specifies
a set of eight ports, with the first octet specifying
p…
OctetStringr/w .1.3.6.1.4.1.629.1.9.1.4.4.1.3
Contains an optional name for the VLAN.
OctetStringr/w
Constraints:
range: 0-15
.1.3.6.1.4.1.629.1.9.1.4.4.1.4
A 12 bit Port VLAN Identifier for this Port.
0 - The Null VLAN ID.used when the Tag Header contains
only user_priority information; No VLAN
identifier is present in the frame. This number is
not allowed her…
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.629.1.9.1.4.4.1.5
Contains an index in the nbsMegaSwRunSvlanTable for this
InterSwitch VLAN.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.629.1.9.1.4.4.1.6

nbsMegaSwRunVbcTable

table mandatory
.1.3.6.1.4.1.629.1.9.1.5.2 · 1 row entry · 3 columns
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk nbsMegaSwRunVbcTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NBASE-G1-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NBASE-G1-MIB::nbsMegaSwRunVbcTable'
A list of the current Virtual Broadcast Domains defined.
Number of entries is given by nbsMegaSwRunVbcMaxNum
nbsMegaSwRunVbcEntry row .1.3.6.1.4.1.629.1.9.1.5.2.1
Contains the list of ports included in a Virtual Broadcast
Domain.
Column Syntax OID
The serial number of this entry in the nbsMegaSwRunVbcTbl.
It may range from 1 to the value of nbsMegaSwRunVbcMaxNum.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.629.1.9.1.5.2.1.1
The object is used to create/delete entries in the
nbsMegaSwRunVbcTable table.

Setting this value to invalid(2) for a certain
nbsMegaSwRunVbcIndex, deletes this entry.

To create a new entry…
Enumerationr/w
Enumerated Values:
1valid
2invalid
.1.3.6.1.4.1.629.1.9.1.5.2.1.2
Contains the list of the ports grouped together in this
Virtual Broadcast Domain. The representation is a bit map.
Each octet within the value of this object specifies
a set of eight ports, with the first octet specifyi…
OctetStringr/w .1.3.6.1.4.1.629.1.9.1.5.2.1.3

nbsMegaSwPermSvlanTable

table mandatory
.1.3.6.1.4.1.629.1.9.2.1.2 · 1 row entry · 3 columns
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk nbsMegaSwPermSvlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NBASE-G1-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NBASE-G1-MIB::nbsMegaSwPermSvlanTable'
A list of the current Security Virtual LANs defined.
Number of entries is given by nbsMegaSwPermSvlanMaxNum
nbsMegaSwPermSvlanEntry row .1.3.6.1.4.1.629.1.9.2.1.2.1
Contains the list of ports included in a Virtual LAN.
Column Syntax OID
The serial number of this entry in the nbsMegaSwPermSvlanTbl.
It may range from 1 to the value of nbsMegaSwPermSvlanMaxNum
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.629.1.9.2.1.2.1.1
The object is used to create/delete entries in the
nbsMegaSwPermSvlanTable table.

Setting this value to invalid(2) for a certain
nbsMegaSwPermSvlanIndex, deletes this entry.

To create a new…
Enumerationr/w
Enumerated Values:
1valid
2invalid
.1.3.6.1.4.1.629.1.9.2.1.2.1.2
Contains the list of the ports grouped together in this
Security Virtual LAN. The representation is a bit map.
Each octet within the value of this object specifies
a set of eight ports, with the first octet specifying
p…
OctetStringr/w .1.3.6.1.4.1.629.1.9.2.1.2.1.3

nbsMegaSwPermIsvlanTable

table mandatory
.1.3.6.1.4.1.629.1.9.2.1.4 · 1 row entry · 5 columns
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk nbsMegaSwPermIsvlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NBASE-G1-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NBASE-G1-MIB::nbsMegaSwPermIsvlanTable'
A list of the current InetrSwitch Security Virtual LANs
defined. Number of entries is given by nbsMegaSwPermSvlanMaxNum
nbsMegaSwPermIsvlanEntry row .1.3.6.1.4.1.629.1.9.2.1.4.1
Contains the descriptor of a InterSwitch Security Virtual LAN.
Column Syntax OID
The serial number of this entry in the nbsMegaSwPermIsvlanTbl.
It may range from 1 to the value of nbsMegaSwPermIsvlanMaxNum.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.629.1.9.2.1.4.1.1
The object is used to create/delete entries in the
nbsMegaSwPermIsvlanTable table.

Setting this value to invalid(2) for a certain
nbsMegaSwPermIsvlanIndex, deletes this entry.

To create a n…
Enumerationr/w
Enumerated Values:
1valid
2invalid
3mcast
.1.3.6.1.4.1.629.1.9.2.1.4.1.2
Contains the list of the ports grouped together in this
Security Virtual LAN. The representation is a bit map.
Each octet within the value of this object specifies
a set of eight ports, with the first octet specifying
p…
OctetStringr/w .1.3.6.1.4.1.629.1.9.2.1.4.1.3
Contains an optional name for the VLAN.
OctetStringr/w
Constraints:
range: 0-15
.1.3.6.1.4.1.629.1.9.2.1.4.1.4
A 12 bit Port VLAN Identifier for this Port.
0 - The Null VLAN ID.used when the Tag Header contains
only user_priority information; No VLAN
identifier is present in the frame. This number is
not allowed her…
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.629.1.9.2.1.4.1.5

nbsMegaSwPermVbcTable

table mandatory
.1.3.6.1.4.1.629.1.9.2.2.2 · 1 row entry · 3 columns
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk nbsMegaSwPermVbcTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NBASE-G1-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NBASE-G1-MIB::nbsMegaSwPermVbcTable'
A list of the current Virtual Broadcast Domains defined.
Number of entries is given by nbsMegaSwPermVbcMaxNum
nbsMegaSwPermVbcEntry row .1.3.6.1.4.1.629.1.9.2.2.2.1
Contains the list of ports included in a Virtual Broadcast
Domain.
Column Syntax OID
The serial number of this entry in the nbsMegaSwPermVbcTbl.
It may range from 1 to the value of nbsMegaSwPermVbcMaxNum.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.629.1.9.2.2.2.1.1
The object is used to create/delete entries in the
nbsMegaSwPermVbcTable table.

Setting this value to invalid(2) for a certain
nbsMegaSwPermVbcIndex, deletes this entry.

To create a new ent…
Enumerationr/w
Enumerated Values:
1valid
2invalid
.1.3.6.1.4.1.629.1.9.2.2.2.1.2
Contains the list of the ports grouped together in this
Virtual Broadcast Domain. The representation is a bit map.
Each octet within the value of this object specifies
a set of eight ports, with the first octet specifyi…
OctetStringr/w .1.3.6.1.4.1.629.1.9.2.2.2.1.3