MY-INTERFACE-MIB Table View

list of interface basic configuration objects.

myIfEntry row .1.3.6.1.4.1.4881.1.1.10.2.10.1.1.1

Entry contains interface basic configurations.

Indexes

No indexes recorded

Column	Syntax	OID
myIfIndex	MY-TCIfIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.4881.1.1.10.2.10.1.1.1.1
myIfPortType Port type of this port, list as above. port100MBASEFX indicates that port is port100MBASEFXL or port100MBASEFXS, and system doesn't distinguish. port1000MBASEFX indicates that port is port1000MBASEFLX or port1000MBASEFS…	Enumeration	.1.3.6.1.4.1.4881.1.1.10.2.10.1.1.1.2
myIfFlowControlAdminStatus Flow control of a port management status. This attribute apply physical port and aggreate port	Enumerationr/w	.1.3.6.1.4.1.4881.1.1.10.2.10.1.1.1.3
myIfFlowControlOperStatus Oper status: after the negotiation between two ports connetted the flow contrl status. This attribute apply physical port and aggreate port	P-BRIDGE-MIBEnabledStatus Enumerated Values: 1 fiber 2 copper	.1.3.6.1.4.1.4881.1.1.10.2.10.1.1.1.4
myIfAdminSpeed port speed settings. This attribute apply physical port and aggreate port	Enumerationr/w	.1.3.6.1.4.1.4881.1.1.10.2.10.1.1.1.5
myIfAdminDuplex port duplex settings. This attribute apply physical port and aggreate port	Enumerationr/w	.1.3.6.1.4.1.4881.1.1.10.2.10.1.1.1.6
myIfOperSpeed After two port have negotiated the speed status,and this object is the working speed status. while the port link status is down , then the speed status is unknown(4). This attribute apply physical port a…	Enumeration	.1.3.6.1.4.1.4881.1.1.10.2.10.1.1.1.7
myIfOperDuplex After two port have negotiated the duplex status, and this object is the working duplex status. while the port link status is down , then the speed status is unknown(3). This attribute apply physical por…	Enumeration	.1.3.6.1.4.1.4881.1.1.10.2.10.1.1.1.8
myIfManageStatus Management status of the interface.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.4881.1.1.10.2.10.1.1.1.9
myIfIpBroadcast Broadcast address of the interface. if broadcast address not configured on interface, return 0.0.0.0	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.4881.1.1.10.2.10.1.1.1.10
myIfLayer	Enumerationr/w	.1.3.6.1.4.1.4881.1.1.10.2.10.1.1.1.11
myIfMode This value is meaning for only physical port and aggreate port	Enumerationr/w	.1.3.6.1.4.1.4881.1.1.10.2.10.1.1.1.12
myIfCounterClear Setting its to any value but 0, will clear counters of this interface. Setting its value to 0 will cause no action of the agent. and when query will always return 0.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4881.1.1.10.2.10.1.1.1.13
myIfEntryStatus Status of this entry, set this object to valid will create a interface, and set its value to invalid will delete the interface of this entry.	MY-TCConfigStatusr/w Enumerated Values: 1 ok 2 open 3 short	.1.3.6.1.4.1.4881.1.1.10.2.10.1.1.1.14
myIfMediumType Port medium type of this port,fiber or copper.	Enumerationr/w	.1.3.6.1.4.1.4881.1.1.10.2.10.1.1.1.15

A list of interface ip configuration entries.

myIfIpEntry row .1.3.6.1.4.1.4881.1.1.10.2.10.1.2.1

An entry containing configuration information applicable
to a Layer3 interface.

Indexes

No indexes recorded

Column	Syntax	OID
myIfIpIfIndex A unique value, for each Layer3 interface.	MY-TCIfIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.4881.1.1.10.2.10.1.2.1.1
myIfIpId Type of interface ip address.	Enumeration	.1.3.6.1.4.1.4881.1.1.10.2.10.1.2.1.2
myIfIp Ip address of the interface myIfIndex refer to.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.4881.1.1.10.2.10.1.2.1.3
myIfIpMask Ip mask of the interface ip address.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.4881.1.1.10.2.10.1.2.1.4
myIfIpEntryStatus entry status of this entry. and the means in this enviraments can reffer to the text-convention definition of the RowStatus.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4881.1.1.10.2.10.1.2.1.5

list of interface status. Status information include some error state and
result of examining to the interface,etc.

myIfStatusEntry row .1.3.6.1.4.1.4881.1.1.10.2.10.1.3.1

Entry contains interface status information.

Indexes

No indexes recorded

Column	Syntax	OID
myIfStatusIndex	MY-TCIfIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.4881.1.1.10.2.10.1.3.1.1
myIfStatusLoopBackExamine Setting its to any value but 0, will Checking whether this port or aggreate can receive and send packets normally, It indicates that port or aggreate is normal if opertion is success. Setting its value to 0 will ca…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4881.1.1.10.2.10.1.3.1.2
myIfErrorStatus Port's error status information	Enumeration	.1.3.6.1.4.1.4881.1.1.10.2.10.1.3.1.3
myIfLineDetect When reading this object, system detects the quality of line connecting the port. Detect whether the line is broken or short circuit or not. The meaning of the obtained value: Return value=N*10000000+M N…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4881.1.1.10.2.10.1.3.1.4

Table of entrance to choose port type.

myPortTypeChooseEntry row .1.3.6.1.4.1.4881.1.1.10.2.10.1.5.1

Entrance to choose port type.

Indexes

No indexes recorded

Column	Syntax	OID
myPortTypeChooseIndex The logic port number.	MY-TCIfIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.4881.1.1.10.2.10.1.5.1.1
myPortTypeChooseType The chosen port type. This object is used to choose one of the multiple physical ports of different types, when the same logical port is correspondent with them. Apply this attribute to the physical port only.	Enumeration	.1.3.6.1.4.1.4881.1.1.10.2.10.1.5.1.2

Access table of MTU on interface.

myIfMTUEntry row .1.3.6.1.4.1.4881.1.1.10.2.10.1.6.1

Interfac MTU access.

Indexes

No indexes recorded

Column	Syntax	OID
myIfMTUIndex Interface number	MY-TCIfIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.4881.1.1.10.2.10.1.6.1.1
myIfMTU Interface MTU.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4881.1.1.10.2.10.1.6.1.2

Access table of Available Bandwidth on interface.

myIfAvailableBWEntry row .1.3.6.1.4.1.4881.1.1.10.2.10.1.7.1

Interfac available bandwidth access.

Indexes

No indexes recorded

Column	Syntax	OID
myIfAvailableBWIfIndex Interface number	MY-TCIfIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.4881.1.1.10.2.10.1.7.1.1
myIfAvailableBWIfBW Interface available bandwidth(bit).		.1.3.6.1.4.1.4881.1.1.10.2.10.1.7.1.2