MX-TELIF-MIB Table View

Specific User Gain
          
This table allows to configure the user gain for a specific
interface. All interfaces have the default configuration
unless the EnableConfig parameter is enabled.

specificCountryCustomizationUserGainEntry row .0.1775.1.200.100.300.1

A row in table Specific User Gain.

Indexes

specificCountryCustomizationUserGainInterfaceId

Column	Syntax	OID
specificCountryCustomizationUserGainInterfaceId Interface Identifier String that identifies a interface in other tables.	OctetString	.0.1775.1.200.100.300.1.100
specificCountryCustomizationUserGainEnableConfig Enable Configuration Defines the configuration to use for a specific interface. * Disable: The interface uses the default configuration as defined in the DefaultCountryCustomizati…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1775.1.200.100.300.1.200
specificCountryCustomizationUserGainInputOffset Specific User Input Gain Offset The user input gain offset is added to the base input gain to compute the total input gain on this specific telephony interface. The user input gain is in dB. …	Integer32r/w Constraints: range: -12-12	.0.1775.1.200.100.300.1.300
specificCountryCustomizationUserGainOutputOffset Specific User Output Gain Offset The user output gain offset is added to the base output gain to compute the total output gain on this specific telephony interface. The user output gain is in dB. …	Integer32r/w Constraints: range: -12-12	.0.1775.1.200.100.300.1.400

Specific Country Override Dialing.
          
This table allows to override the default country dialing
configuration for a specific interface. All interfaces have
the default configuration unless the EnableConfig parameter is
enabled.

specificCountryCustomizationDialingEntry row .0.1775.1.200.400.400.1

A row in table Specific Country Override Dialing..

Indexes

specificCountryCustomizationDialingInterfaceId

Column	Syntax	OID
specificCountryCustomizationDialingInterfaceId Interface Identifier String that identifies a Interface in other tables.	OctetString	.0.1775.1.200.400.400.1.100
specificCountryCustomizationDialingEnableConfig Enable Configuration Defines the configuration to use for a specific interface. * Disable: The interface uses the default configuration as defined in the DefaultCountryCustomizationDi…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1775.1.200.400.400.1.200
specificCountryCustomizationDialingOverride Specific Override Dialing Country Configuration Allows to override the default country dialing setting. * Disable: The interface uses the default country dialing setting. * Enable: …	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1775.1.200.400.400.1.300
specificCountryCustomizationDialingInterDtmfDialDelay Specific Delay Between Dialed DTMF The delay between two DTMFs when dialing on the interface. This value is expressed in milliseconds (ms). This configuration is used only if…	Unsigned32r/w Constraints: range: 50-600	.0.1775.1.200.400.400.1.400
specificCountryCustomizationDialingDtmfDuration Specific Dialed DTMF Duration The duration of a DTMF when dialing on the interface. This value is expressed in milliseconds (ms). This configuration is used only if the Overr…	Unsigned32r/w Constraints: range: 50-600	.0.1775.1.200.400.400.1.500
specificCountryCustomizationDialingInterMfR1DialDelay Specific Delay Between Dialed MFR1 The delay between two MFR1s when dialing on the interface. This value is expressed in milliseconds (ms). This configuration is used only if…	Unsigned32r/w Constraints: range: 50-600	.0.1775.1.200.400.400.1.600
specificCountryCustomizationDialingMfR1Duration Specific Dialed MFR1 Duration The duration of a MFR1 when dialing on the interface. This value is expressed in milliseconds (ms). This configuration is used only if the Overr…	Unsigned32r/w Constraints: range: 50-600	.0.1775.1.200.400.400.1.700

Country Tone Status
          
This table displays the current tone pattern used (depends on
the CountrySelection parameter and the
CountryCustomizationTone table). The configuration applies to
all interfaces.

countryToneStatusEntry row .0.1775.1.200.500.100.1

A row in table Country Tone Status.

Indexes

countryToneStatusTone

Column	Syntax	OID
countryToneStatusTone Tone Tone.	Enumeration Enumerated Values: 100 busy 150 callWaiting 200 confirmation 300 congestion 400 dial 500 hold 600 intercept 700 messageWaiting 800 preemption 900 reorder 1000 ringback 1100 roh 1200 sit 1300 stutter	.0.1775.1.200.500.100.1.100
countryToneStatusPattern Pattern Pattern description of the currently used tone. See the CountryCustomizationTone.Pattern parameter for a description of the syntax.	OctetString Constraints: range: 0-512	.0.1775.1.200.500.100.1.300

Country Customisation Tone
          
This table allows to override the default country tone
configuration. The configuration applies to all interfaces.

countryCustomizationToneEntry row .0.1775.1.200.500.200.1

A row in table Country Customisation Tone.

Indexes

countryCustomizationToneTone

Column	Syntax	OID
countryCustomizationToneTone Tone Tone to customise.	Enumeration Enumerated Values: 100 busy 150 callWaiting 200 confirmation 300 congestion 400 dial 500 hold 600 intercept 700 messageWaiting 800 preemption 900 reorder 1000 ringback 1100 roh 1200 sit 1300 stutter	.0.1775.1.200.500.200.1.100
countryCustomizationToneOverride Override Tone Country Configuration Allows to override the default country tone setting. * Disable: The unit uses the default country dialing setting. * Enable: The unit uses the to…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1775.1.200.500.200.1.200
countryCustomizationTonePattern Pattern Describes a tone pattern. A tone description contains frequencies, states and loops. Up to 4 frequencies (f1 to f4) each with a power level can be defined. At least one frequency/po…	OctetStringr/w Constraints: range: 0-512	.0.1775.1.200.500.200.1.300

Specific Voice Codec Configuration
          
specific configuration.

specificMachineDetectionEntry row .0.1775.1.300.200.1

A row in table Specific Voice Codec Configuration .

Indexes

specificMachineDetectionInterfaceId

Column	Syntax	OID
specificMachineDetectionInterfaceId Interface Identifier String that identifies a interface in other tables.	OctetString	.0.1775.1.300.200.1.100
specificMachineDetectionEnableConfig Enable Configuration Defines the configuration to use for a specific interface. * Disable: The interface uses the default configuration as defined in the DefaultMachineDetectionCngTon…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1775.1.300.200.1.200
specificMachineDetectionCngToneDetection Specific Enable/Disable CNG Tone Detection Enables fax calling tone (CNG tone) detection. * Enable: Upon recognition of the CNG tone, the unit switches the communication from voice mo…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1775.1.300.200.1.300
specificMachineDetectionCedToneDetection Specific Enable/Disable CED Tone Detection Enables CED tone detection. * Enable: Upon recognition of the CED tone, the unit behaves as defined in DefaultMachineDetectionBehaviorOn…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1775.1.300.200.1.310
specificMachineDetectionV21ModulationDetection Specific Enable/Disable V.21 Modulation Detection Enables fax V.21 modulation detection. * Enable: Upon recognition of the V.21 modulation tone, the unit switches the communication fr…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1775.1.300.200.1.320
specificMachineDetectionBehaviorOnCedToneDetection Specific CED Tone Detection Behavior Defines the behavior of the unit upon detection of a CED tone. * Passthrough: In passthrough mode the CED tone does not trigger a transition from …	Enumerationr/w Enumerated Values: 100 passthrough 200 faxmode	.0.1775.1.300.200.1.400

Distinctive Call Waiting Tone
          
This table allows to override the default country call waiting
tone configuration. The configuration applies to all
interfaces.

distinctiveCallWaitingToneEntry row .0.1775.1.500.100.1

A row in table Distinctive Call Waiting Tone.

Indexes

distinctiveCallWaitingToneIndex

Column	Syntax	OID
distinctiveCallWaitingToneIndex Row Index Unique identifier of the row in the table.	Unsigned32 Constraints: range: 1-4	.0.1775.1.500.100.1.100
distinctiveCallWaitingToneToneId Tone ID Identification of the distinctive call waiting tone. When the ToneId parameter is defined and the incoming call property 'distinctive-ring' matches with it, the corresponding tone pattern is used.…	OctetStringr/w Constraints: range: 0-512	.0.1775.1.500.100.1.200
distinctiveCallWaitingTonePattern Pattern Pattern description of the custom tone. See the CountryCustomizationTone.Pattern parameter for syntax description. Note that only two frequencies can be used by the C…	OctetStringr/w Constraints: range: 0-512	.0.1775.1.500.100.1.300

DTMF Detection Configuration
          
DTMF Detection Configuration

interopDtmfDetectionEntry row .0.1775.1.50000.100.1

A row in table DTMF Detection Configuration.

Indexes

interopDtmfDetectionInterfaceId

Column	Syntax	OID
interopDtmfDetectionInterfaceId Interface Identifier String that identifies an interface in other tables.	OctetString	.0.1775.1.50000.100.1.100
interopDtmfDetectionRiseTimeCriteria Rise Time Criteria Defines how the Rise Time criteria should be configured for DTMF detection. * CheckSr: Enable the Step Rise criteria and disable the Confirm DTMF SNR criteria. * …	Enumerationr/w Enumerated Values: 100 checkSr 200 confirmSnr	.0.1775.1.50000.100.1.200
interopDtmfDetectionPositiveTwist Malformed DTMF Detection Method Defines the value for the Positive Twist DTMF detection parameter. When the high-group frequency of a DTMF is more powerful than the low-group frequency, the…	Unsigned32r/w Constraints: range: 1-14	.0.1775.1.50000.100.1.300
interopDtmfDetectionNegativeTwist Malformed DTMF Detection Method Defines the value for the Negative Twist DTMF detection parameter. When the low-group frequency of a DTMF is more powerful than the high-group frequency, the…	Unsigned32r/w Constraints: range: 1-14	.0.1775.1.50000.100.1.350
interopDtmfDetectionMaxPowerThreshold Maximum power for dual-tone detection The average power of a DTMF must be below the value set in this parameter to be no longer detected. Raising this value increases the sensitivity of the DTMF detection…	Integer32r/w Constraints: range: -20-1	.0.1775.1.50000.100.1.400
interopDtmfDetectionMinPowerThreshold Minimum power for dual-tone detection The average power of a DTMF must be above the value set in this parameter for at least 30ms to be detected. Raising this value reduces the sensitivity to DTMF detecti…	Integer32r/w Constraints: range: -45--10	.0.1775.1.50000.100.1.450
interopDtmfDetectionBreakPowerThreshold Power threshold not to be exceeded when looking for break detection When the average power of a DTMF falls below the value set in this parameter for at least 20ms, it is considered that the DTMF ended. …	Integer32r/w Constraints: range: -45--12	.0.1775.1.50000.100.1.500

Start Call In VBD
          
Start Call In VBD

interopStartCallInVbdEntry row .0.1775.1.50000.200.1

A row in table Start Call In VBD.

Indexes

interopStartCallInVbdInterfaceId

Column	Syntax	OID
interopStartCallInVbdInterfaceId Interface Identifier String that identifies an interface in other tables.	OctetString	.0.1775.1.50000.200.1.100
interopStartCallInVbdEnable Enable Indicates whether or not a call should be started in voiceband data mode. * Disable: Call is started in voice mode. A fax/modem tone detection triggers a transition from voice …	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1775.1.50000.200.1.200