MX-MIPT-MIB Table View

Endpoint Specific Voice Codec Configuration
          
Endpoint specific configuration.

epSpecificCodecEntry row .0.1600.1.100.200.1

A row in table Endpoint Specific Voice Codec Configuration .

Indexes

epSpecificCodecEpId

Column	Syntax	OID
epSpecificCodecEpId Endpoint Identifier String that identifies an endpoint in other tables.	OctetString	.0.1600.1.100.200.1.100
epSpecificCodecEnableConfig Enable Configuration Defines the configuration to use for a specific endpoint. * Disable: The endpoint uses the default configuration as defined in the DefaultCodecGenericVoiceActivit…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1600.1.100.200.1.200
epSpecificCodecGenericVoiceActivityDetection Endpoint Specific G.711 VAD Configuraion If Voice Activity Detection (VAD) is enabled, then speech frames are only sent during talkspurts (periods of audio activity). During silence periods…	Enumerationr/w Enumerated Values: 100 disable 200 transparent 300 conservative	.0.1600.1.100.200.1.300

Endpoint Specific Voice Codec Configuration
          
Endpoint specific configuration.

epSpecificCodecG711MulawEntry row .0.1600.1.100.300.100.700.1

A row in table Endpoint Specific Voice Codec Configuration .

Indexes

epSpecificCodecG711MulawEpId

Column	Syntax	OID
epSpecificCodecG711MulawEpId Endpoint Identifier String that identifies an endpoint in other tables.	OctetString	.0.1600.1.100.300.100.700.1.100
epSpecificCodecG711MulawEnableConfig Enable Configuration Defines the configuration to use for a specific endpoint. * Disable: The endpoint uses the default configuration as defined in the DefaultCodecG711MulawVoiceEnabl…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1600.1.100.300.100.700.1.200
epSpecificCodecG711MulawVoiceEnable Endpoint Specific G.711 Mu-Law Enable/Disable Configuration for Voice Indicates if the codec can be selected for voice transmission. If enabled, this codec is listed as supported for this specific endpoin…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1600.1.100.300.100.700.1.300
epSpecificCodecG711MulawVoicePriority Endpoint Specific G.711 Mu-Law Priority Configuration for Voice Indicates the priority of this voice codec versus the other voice codecs. The voice codec with the highest priority will be offered first wh…	Unsigned32r/w Constraints: range: 0-10	.0.1600.1.100.300.100.700.1.400
epSpecificCodecG711MulawDataEnable Endpoint Specific G.711 Mu-Law Enable/Disable Configuration for Data Indicates if the codec can be selected for data transmission. If enabled, this codec is listed as supported for this specific endpoint.…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1600.1.100.300.100.700.1.500
epSpecificCodecG711MulawDataPriority Endpoint Specific G.711 Mu-Law Priority Configuration for Data Indicates the priority of this data codec versus the other data codecs. The data codec with the highest priority will be offered first when a…	Unsigned32r/w Constraints: range: 0-10	.0.1600.1.100.300.100.700.1.600
epSpecificCodecG711MulawMinPTime Endpoint Specific G.711 Mu-Law Minimum Packetization Period Configuration Lower boundary for the packetization period of the given codec. PCMU -> (10 ms..30 ms) This value is…	Unsigned32r/w Constraints: range: 10-30	.0.1600.1.100.300.100.700.1.700
epSpecificCodecG711MulawMaxPTime Endpoint Specific G.711 Mu-Law Maximum Packetization Period Configuration Upper boundary for the packetization period of the given codec. PCMU -> (10 ms..30 ms) This value is…	Unsigned32r/w Constraints: range: 10-30	.0.1600.1.100.300.100.700.1.800

Endpoint Specific Voice Codec Configuration
          
Endpoint specific configuration.

epSpecificCodecG711AlawEntry row .0.1600.1.100.300.200.700.1

A row in table Endpoint Specific Voice Codec Configuration .

Indexes

epSpecificCodecG711AlawEpId

Column	Syntax	OID
epSpecificCodecG711AlawEpId Endpoint Identifier String that identifies an endpoint in other tables.	OctetString	.0.1600.1.100.300.200.700.1.100
epSpecificCodecG711AlawEnableConfig Enable Configuration Defines the configuration to use for a specific endpoint. * Disable: The endpoint uses the default configuration as defined in the DefaultCodecG711AlawVoiceEnable…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1600.1.100.300.200.700.1.200
epSpecificCodecG711AlawVoiceEnable Endpoint Specific G.711 A-Law Enable/Disable Configuration for Voice Indicates if the codec can be selected for voice transmission. If enabled, this codec is listed as supported for this specific endpoint…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1600.1.100.300.200.700.1.300
epSpecificCodecG711AlawVoicePriority Endpoint Specific G.711 A-Law Priority Configuration for Voice Indicates the priority of this voice codec versus the other voice codecs. The voice codec with the highest priority will be offered first whe…	Unsigned32r/w Constraints: range: 0-10	.0.1600.1.100.300.200.700.1.400
epSpecificCodecG711AlawDataEnable Endpoint Specific G.711 A-Law Enable/Disable Configuration for Data Indicates if the codec can be selected for data transmission. If enabled, this codec is listed as supported for this specific endpoint. …	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1600.1.100.300.200.700.1.500
epSpecificCodecG711AlawDataPriority Endpoint Specific G.711 A-Law Priority Configuration for Data Indicates the priority of this data codec versus the other data codecs. The data codec with the highest priority will be offered first when an…	Unsigned32r/w Constraints: range: 0-10	.0.1600.1.100.300.200.700.1.600
epSpecificCodecG711AlawMinPTime Endpoint Specific G.711 A-Law Minimum Packetization Period Configuration Lower boundary for the packetization period of the given codec. PCMA -> (10 ms..30 ms) This value is …	Unsigned32r/w Constraints: range: 10-30	.0.1600.1.100.300.200.700.1.700
epSpecificCodecG711AlawMaxPTime Endpoint Specific G.711 A-Law Maximum Packetization Period Configuration Upper boundary for the packetization period of the given codec. PCMA -> (10 ms..30 ms) This value is …	Unsigned32r/w Constraints: range: 10-30	.0.1600.1.100.300.200.700.1.800

Endpoint Specific Voice Codec Configuration
          
Endpoint specific configuration.

epSpecificCodecG722Entry row .0.1600.1.100.350.500.1

A row in table Endpoint Specific Voice Codec Configuration .

Indexes

epSpecificCodecG722EpId

Column	Syntax	OID
epSpecificCodecG722EpId Endpoint Identifier String that identifies an endpoint in other tables.	OctetString	.0.1600.1.100.350.500.1.100
epSpecificCodecG722EnableConfig Enable Configuration Defines the configuration to use for a specific endpoint. * Disable: The endpoint uses the default configuration as defined in the DefaultCodecG722VoiceEnable, …	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1600.1.100.350.500.1.200
epSpecificCodecG722VoiceEnable Endpoint Specific G.722 Enable/Disable Configuration for Voice Indicates if the codec can be selected for voice transmission. If enabled, this codec is listed as supported for this specific endpoint. Othe…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1600.1.100.350.500.1.300
epSpecificCodecG722VoicePriority Endpoint Specific G.722 Priority Configuration for Voice Indicates the priority of this voice codec versus the other voice codecs. The voice codec with the highest priority will be offered first when an o…	Unsigned32r/w Constraints: range: 0-10	.0.1600.1.100.350.500.1.400
epSpecificCodecG722MinPTime Endpoint Specific G.722 Minimum Packetization Period Configuration Lower boundary for the packetization period of the given codec. G.722 -> (20 ms) This configuration overrid…	Unsigned32r/w Constraints: range: 20-20	.0.1600.1.100.350.500.1.500
epSpecificCodecG722MaxPTime Endpoint Specific G.722 Maximum Packetization Period Configuration Upper boundary for the packetization period of the given codec. G.722 -> (20 ms) This configuration overrid…	Unsigned32r/w Constraints: range: 20-20	.0.1600.1.100.350.500.1.600

Endpoint Specific Voice Codec Configuration
          
Endpoint specific configuration.

epSpecificCodecG723Entry row .0.1600.1.100.400.700.1

A row in table Endpoint Specific Voice Codec Configuration .

Indexes

epSpecificCodecG723EpId

Column	Syntax	OID
epSpecificCodecG723EpId Endpoint Identifier String that identifies an endpoint in other tables.	OctetString	.0.1600.1.100.400.700.1.100
epSpecificCodecG723EnableConfig Enable Configuration Defines the configuration to use for a specific endpoint. * Disable: The endpoint uses the default configuration as defined in the DefaultCodecG723VoiceEnable, …	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1600.1.100.400.700.1.200
epSpecificCodecG723VoiceEnable Endpoint Specific G.723.1 Enable/Disable Configuration for Voice Indicates if the codec can be selected for voice transmission. If enabled, this codec is listed as supported for this specific endpoint. Ot…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1600.1.100.400.700.1.300
epSpecificCodecG723VoicePriority Endpoint Specific G.723.1 Priority Configuration for Voice Indicates the priority of this voice codec versus the other voice codecs. The voice codec with the highest priority will be offered first when an…	Unsigned32r/w Constraints: range: 0-10	.0.1600.1.100.400.700.1.400
epSpecificCodecG723Bitrate Endpoint Specific G.723.1 Bit Rate Indicates the G.723.1 bit rate to use. This configuration overrides the default configuration set in the DefaultCodecG723Bitrate parameter if the EpSpecif…	Enumerationr/w Enumerated Values: 100 rate53kbps 200 rate63kbps	.0.1600.1.100.400.700.1.500
epSpecificCodecG723MinPTime Endpoint Specific G.723.1 Minimum Packetization Period Configuration Lower boundary for the packetization period of the given codec. G.723.1 -> (30 ms|60 ms) For reception, t…	Unsigned32r/w Constraints: range: 30-30 range: 60-60	.0.1600.1.100.400.700.1.600
epSpecificCodecG723MaxPTime Endpoint Specific G.723.1 Maximum Packetization Period Configuration Upper boundary for the packetization period of the given codec. G.723.1 -> (30 ms|60 ms) For reception, t…	Unsigned32r/w Constraints: range: 30-30 range: 60-60	.0.1600.1.100.400.700.1.700

Endpoint Specific Voice Codec Configuration
          
Endpoint specific configuration.

epSpecificCodecG726r16kbpsEntry row .0.1600.1.100.500.100.600.1

A row in table Endpoint Specific Voice Codec Configuration .

Indexes

epSpecificCodecG726r16kbpsEpId

Column	Syntax	OID
epSpecificCodecG726r16kbpsEpId Endpoint Identifier String that identifies an endpoint in other tables.	OctetString	.0.1600.1.100.500.100.600.1.100
epSpecificCodecG726r16kbpsEnableConfig Enable Configuration Defines the configuration to use for a specific endpoint. * Disable: The endpoint uses the default configuration as defined in the DefaultCodecG726r16kbpsVoiceEna…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1600.1.100.500.100.600.1.200
epSpecificCodecG726r16kbpsVoiceEnable Endpoint Specific G.726 16 Kbit/s Enable/Disable Configuration for Voice Indicates if the codec can be selected for voice transmission. If enabled, this codec is listed as supported for this specific endp…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1600.1.100.500.100.600.1.300
epSpecificCodecG726r16kbpsVoicePriority Endpoint Specific G.726 16 Kbit/s Priority Configuration for Voice Indicates the priority of this voice codec versus the other voice codecs. The voice codec with the highest priority will be offered first…	Unsigned32r/w Constraints: range: 0-10	.0.1600.1.100.500.100.600.1.400
epSpecificCodecG726r16kbpsPayloadType Endpoint Specific G.726 16 Kbit/s Payload Type Determines the actual RTP dynamic payload type used in an initial offer when enabling G.726 at 16 kbps for voice and data transmission. The pa…	Unsigned32r/w Constraints: range: 96-127	.0.1600.1.100.500.100.600.1.500
epSpecificCodecG726r16kbpsMinPTime Endpoint Specific G.726 16 Kbit/s Minimum Packetization Period Configuration Lower boundary for the packetization period of the given codec. G.726 at 16 kbps -> (10 ms..30 ms) …	Unsigned32r/w Constraints: range: 10-30	.0.1600.1.100.500.100.600.1.600
epSpecificCodecG726r16kbpsMaxPTime Endpoint Specific G.726 16 Kbit/s Maximum Packetization Period Configuration Upper boundary for the packetization period of the given codec. G.726 at 16 kbps -> (10 ms..30 ms) …	Unsigned32r/w Constraints: range: 10-30	.0.1600.1.100.500.100.600.1.700

Endpoint Specific Voice Codec Configuration
          
Endpoint specific configuration.

epSpecificCodecG726r24kbpsEntry row .0.1600.1.100.500.200.600.1

A row in table Endpoint Specific Voice Codec Configuration .

Indexes

epSpecificCodecG726r24kbpsEpId

Column	Syntax	OID
epSpecificCodecG726r24kbpsEpId Endpoint Identifier String that identifies an endpoint in other tables.	OctetString	.0.1600.1.100.500.200.600.1.100
epSpecificCodecG726r24kbpsEnableConfig Enable Configuration Defines the configuration to use for a specific endpoint. * Disable: The endpoint uses the default configuration as defined in the DefaultCodecG726r24kbpsVoiceEna…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1600.1.100.500.200.600.1.200
epSpecificCodecG726r24kbpsVoiceEnable Endpoint Specific G.726 24 Kbit/s Enable/Disable Configuration for Voice Indicates if the codec can be selected for voice transmission. If enabled, this codec is listed as supported for this specific endp…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1600.1.100.500.200.600.1.300
epSpecificCodecG726r24kbpsVoicePriority Endpoint Specific G.726 24 Kbit/s Priority Configuration for Voice Indicates the priority of this voice codec versus the other voice codecs. The voice codec with the highest priority will be offered first…	Unsigned32r/w Constraints: range: 0-10	.0.1600.1.100.500.200.600.1.400
epSpecificCodecG726r24kbpsPayloadType Endpoint Specific G.726 24 Kbit/s Payload Type Determines the actual RTP dynamic payload type used in an initial offer when enabling G.726 at 24 kbps for voice and data transmission. The pa…	Unsigned32r/w Constraints: range: 96-127	.0.1600.1.100.500.200.600.1.500
epSpecificCodecG726r24kbpsMinPTime Endpoint Specific G.726 24 Kbit/s Minimum Packetization Period Configuration Lower boundary for the packetization period of the given codec. G.726 at 24 kbps -> (10 ms..30 ms) …	Unsigned32r/w Constraints: range: 10-30	.0.1600.1.100.500.200.600.1.600
epSpecificCodecG726r24kbpsMaxPTime Endpoint Specific G.726 24 Kbit/s Maximum Packetization Period Configuration Upper boundary for the packetization period of the given codec. G.726 at 24 kbps -> (10 ms..30 ms) …	Unsigned32r/w Constraints: range: 10-30	.0.1600.1.100.500.200.600.1.700

Endpoint Specific Voice Codec Configuration
          
Endpoint specific configuration.

epSpecificCodecG726r32kbpsEntry row .0.1600.1.100.500.300.800.1

A row in table Endpoint Specific Voice Codec Configuration .

Indexes

epSpecificCodecG726r32kbpsEpId

Column	Syntax	OID
epSpecificCodecG726r32kbpsEpId Endpoint Identifier String that identifies an endpoint in other tables.	OctetString	.0.1600.1.100.500.300.800.1.100
epSpecificCodecG726r32kbpsEnableConfig Enable Configuration Defines the configuration to use for a specific endpoint. * Disable: The endpoint uses the default configuration as defined in the DefaultCodecG726r32kbpsVoiceEna…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1600.1.100.500.300.800.1.200
epSpecificCodecG726r32kbpsVoiceEnable Endpoint Specific G.726 32 Kbit/s Enable/Disable Configuration for Voice Indicates if the codec can be selected for voice transmission. If enabled, this codec is listed as supported for this specific endp…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1600.1.100.500.300.800.1.300
epSpecificCodecG726r32kbpsVoicePriority Endpoint Specific G.726 32 Kbit/s Priority Configuration for Voice Indicates the priority of this voice codec versus the other voice codecs. The voice codec with the highest priority will be offered first…	Unsigned32r/w Constraints: range: 0-10	.0.1600.1.100.500.300.800.1.400
epSpecificCodecG726r32kbpsDataEnable Endpoint Specific G.726 32 Kbit/s Enable/Disable Configuration for Data Indicates if the codec can be selected for data transmission. If enabled, this codec is listed as supported for this specific endpoi…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1600.1.100.500.300.800.1.500
epSpecificCodecG726r32kbpsDataPriority Endpoint Specific G.726 32 Kbit/s Priority Configuration for Data Indicates the priority of this data codec versus the other data codecs. The data codec with the highest priority will be offered first whe…	Unsigned32r/w Constraints: range: 0-10	.0.1600.1.100.500.300.800.1.600
epSpecificCodecG726r32kbpsPayloadType Endpoint Specific G.726 32 Kbit/s Payload Type Determines the actual RTP dynamic payload type used in an initial offer when enabling G.726 at 32 kbps for voice and data transmission. The pa…	Unsigned32r/w Constraints: range: 96-127	.0.1600.1.100.500.300.800.1.700
epSpecificCodecG726r32kbpsMinPTime Endpoint Specific G.726 32 Kbit/s Minimum Packetization Period Configuration Lower boundary for the packetization period of the given codec. G.726 at 32 kbps -> (10 ms..30 ms) …	Unsigned32r/w Constraints: range: 10-30	.0.1600.1.100.500.300.800.1.800
epSpecificCodecG726r32kbpsMaxPTime Endpoint Specific G.726 32 Kbit/s Maximum Packetization Period Configuration Upper boundary for the packetization period of the given codec. G.726 at 32 kbps -> (10 ms..30 ms) …	Unsigned32r/w Constraints: range: 10-30	.0.1600.1.100.500.300.800.1.900

Endpoint Specific Voice Codec Configuration
          
Endpoint specific configuration.

epSpecificCodecG726r40kbpsEntry row .0.1600.1.100.500.400.800.1

A row in table Endpoint Specific Voice Codec Configuration .

Indexes

epSpecificCodecG726r40kbpsEpId

Column	Syntax	OID
epSpecificCodecG726r40kbpsEpId Endpoint Identifier String that identifies an endpoint in other tables.	OctetString	.0.1600.1.100.500.400.800.1.100
epSpecificCodecG726r40kbpsEnableConfig Enable Configuration Defines the configuration to use for a specific endpoint. * Disable: The endpoint uses the default configuration as defined in the DefaultCodecG726r40kbpsVoiceEna…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1600.1.100.500.400.800.1.200
epSpecificCodecG726r40kbpsVoiceEnable Endpoint Specific G.726 40 Kbit/s Enable/Disable Configuration of Voice Indicates if the codec can be selected for voice transmission. If enabled, this codec is listed as supported for this specific endpo…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1600.1.100.500.400.800.1.300
epSpecificCodecG726r40kbpsVoicePriority Endpoint Specific G.726 40 Kbit/s Priority Configuration for Voice Indicates the priority of this voice codec versus the other voice codecs. The voice codec with the highest priority will be offered first…	Unsigned32r/w Constraints: range: 0-10	.0.1600.1.100.500.400.800.1.400
epSpecificCodecG726r40kbpsDataEnable Endpoint Specific G.726 40 Kbit/s Enable/Disable Configuration of Data Indicates if the codec can be selected for data transmission. If enabled, this codec is listed as supported for this specific endpoin…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1600.1.100.500.400.800.1.500
epSpecificCodecG726r40kbpsDataPriority Default G.726 40 Kbit/s Priority Configuration for Data Indicates the priority of this data codec versus the other data codecs. The data codec with the highest priority will be offered first when an outgo…	Unsigned32r/w Constraints: range: 0-10	.0.1600.1.100.500.400.800.1.600
epSpecificCodecG726r40kbpsPayloadType Endpoint Specific G.726 40 Kbit/s Payload Type Determines the actual RTP dynamic payload type used in an initial offer when enabling G.726 at 40 kbps for voice and data transmission. The pa…	Unsigned32r/w Constraints: range: 96-127	.0.1600.1.100.500.400.800.1.700
epSpecificCodecG726r40kbpsMinPTime Endpoint Specific G.726 40 Kbit/s Minimum Packetization Period Configuration Lower boundary for the packetization period of the given codec. G.726 at 40 kbps -> (10 ms..30 ms) …	Unsigned32r/w Constraints: range: 10-30	.0.1600.1.100.500.400.800.1.800
epSpecificCodecG726r40kbpsMaxPTime Endpoint Specific G.726 40 Kbit/s Maximum Packetization Period Configuration Upper boundary for the packetization period of the given codec. G.726 at 40 kbps -> (10 ms..30 ms) …	Unsigned32r/w Constraints: range: 10-30	.0.1600.1.100.500.400.800.1.900

Endpoint Specific Voice Codec Configuration
          
Endpoint specific configuration.

epSpecificCodecG729Entry row .0.1600.1.100.600.600.1

A row in table Endpoint Specific Voice Codec Configuration .

Indexes

epSpecificCodecG729EpId

Column	Syntax	OID
epSpecificCodecG729EpId Endpoint Identifier String that identifies an endpoint in other tables.	OctetString	.0.1600.1.100.600.600.1.100
epSpecificCodecG729EnableConfig Enable Configuration Defines the configuration to use for a specific endpoint. * Disable: The endpoint uses the default configuration as defined in the DefaultCodecG729VoiceEnable, …	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1600.1.100.600.600.1.200
epSpecificCodecG729VoiceEnable Endpoint Specific G.729 Enable/Disable Configuration for Voice Indicates if the codec can be selected for voice transmission. If enabled, this codec is listed as supported for this specific endpoint. Othe…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1600.1.100.600.600.1.300
epSpecificCodecG729VoicePriority Endpoint Specific G.729 Priority Configuration for Voice Indicates the priority of this voice codec versus the other voice codecs. The voice codec with the highest priority will be offered first when an o…	Unsigned32r/w Constraints: range: 0-10	.0.1600.1.100.600.600.1.400
epSpecificCodecG729MinPTime Endpoint Specific G.729 Minimum Packetization Period Configuration Lower boundary for the packetization period of the given codec. G.729 -> (20 ms|30 ms|40 ms|50 ms|60 ms|70 ms|80 ms) …	Unsigned32r/w Constraints: range: 20-20 range: 30-30 range: 40-40 range: 50-50 range: 60-60 range: 70-70 range: 80-80	.0.1600.1.100.600.600.1.500
epSpecificCodecG729MaxPTime Endpoint Specific G.729 Maximum Packetization Period Configuration Upper boundary for the packetization period of the given codec. G.729 -> (20 ms|30 ms|40 ms|50 ms|60 ms|70 ms|80 ms) …	Unsigned32r/w Constraints: range: 20-20 range: 30-30 range: 40-40 range: 50-50 range: 60-60 range: 70-70 range: 80-80	.0.1600.1.100.600.600.1.600
epSpecificCodecG729VoiceActivityDetection Endpoint Specific G.729 VAD Configuration If Voice Activity Detection (VAD) is enabled, then speech frames are only sent during talkspurts (periods of audio activity). During silence period…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1600.1.100.600.600.1.700

Endpoint Specific Voice Codec Configuration
          
Endpoint specific configuration.

epSpecificCodecT38Entry row .0.1600.1.100.700.800.1

A row in table Endpoint Specific Voice Codec Configuration .

Indexes

epSpecificCodecT38EpId

Column	Syntax	OID
epSpecificCodecT38EpId Endpoint Identifier String that identifies an endpoint in other tables.	OctetString	.0.1600.1.100.700.800.1.100
epSpecificCodecT38EnableConfig Enable Configuration Defines the configuration to use for a specific endpoint. * Disable: The endpoint uses the default configuration as defined in the DefaultCodecT38DataEnable, …	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1600.1.100.700.800.1.200
epSpecificCodecT38DataEnable Endpoint Specific T.38 Enable/Disable Configuration for Data If enabled, the T.38 protocol is used for fax transmission. This configuration overrides the default configuration set in the De…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1600.1.100.700.800.1.300
epSpecificCodecT38DataPriority Endpoint Specific T.38 Priority Configuration for Data Indicates the priority of this data codec versus the other data codecs. The data codec with the highest priority will be offered first when an outgoi…	Unsigned32r/w Constraints: range: 10-10	.0.1600.1.100.700.800.1.400
epSpecificCodecT38RedundancyLevel Endpoint Specific T.38 Protection Level. Number of redundancy packets. This is the standard redundancy offered by T.38. Refer to the DefaultCodecT38FinalFramesRedundancy parameter for addit…	Unsigned32r/w Constraints: range: 1-5	.0.1600.1.100.700.800.1.600
epSpecificCodecT38DetectionThreshold Endpoint Specific T.38 Detection Threshold Sets the T.38 input signal detection threshold. Lowering the threshold allows detecting lower amplitude fax signals. * Default: (-26dB) * Low:…	Enumerationr/w Enumerated Values: 100 default 200 low 300 lowest	.0.1600.1.100.700.800.1.700

Endpoint Specific Voice Codec Configuration
          
Endpoint specific configuration.

epSpecificCodecClearModeEntry row .0.1600.1.100.800.800.1

A row in table Endpoint Specific Voice Codec Configuration .

Indexes

epSpecificCodecClearModeEpId

Column	Syntax	OID
epSpecificCodecClearModeEpId Endpoint Identifier String that identifies an endpoint in other tables.	OctetString	.0.1600.1.100.800.800.1.100
epSpecificCodecClearModeEnableConfig Enable Configuration Defines the configuration to use for a specific endpoint. * Disable: The endpoint uses the default configuration as defined in the DefaultCodecClearModeVoiceEnabl…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1600.1.100.800.800.1.200
epSpecificCodecClearModeVoiceEnable Endpoint Specific Clear Mode Enable/Disable Configuration for Voice Indicates if the codec can be selected for voice transmission. If enabled, this codec is listed as supported for this specific endpoint.…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1600.1.100.800.800.1.300
epSpecificCodecClearModeVoicePriority Endpoint Specific Clear Mode Priority Configuration for Voice Indicates the priority of this voice codec versus the other voice codecs. The voice codec with the highest priority will be offered first when…	Unsigned32r/w Constraints: range: 0-10	.0.1600.1.100.800.800.1.400
epSpecificCodecClearModeDataEnable Endpoint Specific Clear Mode Enable/Disable Configuration for Data If enabled, the Clear Mode protocol is used for fax transmission. This configuration overrides the default configuration s…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1600.1.100.800.800.1.500
epSpecificCodecClearModeDataPriority Endpoint Specific Clear Mode Priority Configuration for Data Indicates the priority of this data codec versus the other data codecs. The data codec with the highest priority will be offered first when an …	Unsigned32r/w Constraints: range: 0-10	.0.1600.1.100.800.800.1.600
epSpecificCodecClearModePayloadType Endpoint Specific Clear Mode Payload Type When enabling Clear Mode for voice and data transmission, this parameter determines the actual RTP dynamic payload type used in an initial offer. T…	Unsigned32r/w Constraints: range: 96-127	.0.1600.1.100.800.800.1.700
epSpecificCodecClearModeMinPTime Endpoint Specific Clear Mode Minimum Packetization Period Configuration Lower boundary for the packetization period of the given codec. Clear Mode -> (10 ms..30 ms) This valu…	Unsigned32r/w Constraints: range: 10-30	.0.1600.1.100.800.800.1.800
epSpecificCodecClearModeMaxPTime Endpoint Specific Clear Mode Maximum Packetization Period Configuration Upper boundary for the packetization period of the given codec. Clear Mode -> (10 ms..30 ms) This valu…	Unsigned32r/w Constraints: range: 10-30	.0.1600.1.100.800.800.1.900

Endpoint Specific Voice Codec Configuration
          
Endpoint specific configuration.

epSpecificCodecClearChannelEntry row .0.1600.1.100.900.800.1

A row in table Endpoint Specific Voice Codec Configuration .

Indexes

epSpecificCodecClearChannelEpId

Column	Syntax	OID
epSpecificCodecClearChannelEpId Endpoint Identifier String that identifies an endpoint in other tables.	OctetString	.0.1600.1.100.900.800.1.100
epSpecificCodecClearChannelEnableConfig Enable Configuration Defines the configuration to use for a specific endpoint. * Disable: The endpoint uses the default configuration as defined in the DefaultCodecClearChannelVoiceEn…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1600.1.100.900.800.1.200
epSpecificCodecClearChannelVoiceEnable Endpoint Specific Clear Channel Enable/Disable Configuration for Voice Indicates if the codec can be selected for voice transmission. If enabled, this codec is listed as supported for this specific endpoi…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1600.1.100.900.800.1.300
epSpecificCodecClearChannelVoicePriority Endpoint Specific Clear Channel Priority Configuration for Voice Indicates the priority of this voice codec versus the other voice codecs. The voice codec with the highest priority will be offered first w…	Unsigned32r/w Constraints: range: 0-10	.0.1600.1.100.900.800.1.400
epSpecificCodecClearChannelDataEnable Endpoint Specific Clear Channel Enable/Disable Configuration for Data If enabled, the Clear Channel protocol is used for fax transmission. Clear Channel is a method to carry 64 kbit/s chann…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1600.1.100.900.800.1.500
epSpecificCodecClearChannelDataPriority Endpoint Specific Clear Channel Priority Configuration for Data Indicates the priority of this data codec versus the other data codecs. The data codec with the highest priority will be offered first when …	Unsigned32r/w Constraints: range: 0-10	.0.1600.1.100.900.800.1.600
epSpecificCodecClearChannelPayloadType Endpoint Specific Clear Channel Payload Type When enabling Clear Channel for voice and data transmission, this parameter determines the actual RTP dynamic payload type used in an initial offer. …	Unsigned32r/w Constraints: range: 96-127	.0.1600.1.100.900.800.1.700
epSpecificCodecClearChannelMinPTime Endpoint Specific Clear Channel Minimum Packetization Period Configuration Lower boundary for the packetization period of the given codec. Clear Channel -> (10 ms..30 ms) Thi…	Unsigned32r/w Constraints: range: 10-30	.0.1600.1.100.900.800.1.800
epSpecificCodecClearChannelMaxPTime Endpoint Specific Clear Channel Maximum Packetization Period Configuration Upper boundary for the packetization period of the given codec. Clear Channel -> (10 ms..30 ms) Thi…	Unsigned32r/w Constraints: range: 10-30	.0.1600.1.100.900.800.1.900

Endpoint Specific Voice Codec Configuration
          
Endpoint specific configuration.

epSpecificCodecXCCDEntry row .0.1600.1.100.1000.800.1

A row in table Endpoint Specific Voice Codec Configuration .

Indexes

epSpecificCodecXCCDEpId

Column	Syntax	OID
epSpecificCodecXCCDEpId Endpoint Identifier String that identifies an endpoint in other tables.	OctetString	.0.1600.1.100.1000.800.1.100
epSpecificCodecXCCDEnableConfig Enable Configuration Defines the configuration to use for a specific endpoint. * Disable: The endpoint uses the default configuration as defined in the DefaultCodecXCCDVoiceEnable, …	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1600.1.100.1000.800.1.200
epSpecificCodecXCCDVoiceEnable Endpoint Specific X-CCD Clear Channel Enable/Disable Configuration for Voice Indicates if the codec can be selected for voice transmission. If enabled, this codec is listed as supported for this specific …	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1600.1.100.1000.800.1.300
epSpecificCodecXCCDVoicePriority Endpoint Specific X-CCD Clear Channel Priority Configuration for Voice Indicates the priority of this voice codec versus the other voice codecs. The voice codec with the highest priority will be offered f…	Unsigned32r/w Constraints: range: 0-10	.0.1600.1.100.1000.800.1.400
epSpecificCodecXCCDDataEnable Endpoint Specific X-CCD Clear Channel Enable/Disable Configuration for Data If enabled, the X-CCD Clear Channel protocol is used for fax transmission. This configuration overrides the defau…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1600.1.100.1000.800.1.500
epSpecificCodecXCCDDataPriority Endpoint Specific X-CCD Clear Channel Priority Configuration for Data Indicates the priority of this data codec versus the other data codecs. The data codec with the highest priority will be offered first…	Unsigned32r/w Constraints: range: 0-10	.0.1600.1.100.1000.800.1.600
epSpecificCodecXCCDPayloadType Endpoint Specific X-CCD Clear Channel Payload Type When enabling X-CCD Clear Channel for voice and data transmission, this parameter determines the actual RTP dynamic payload type used in an initial offer…	Unsigned32r/w Constraints: range: 96-127	.0.1600.1.100.1000.800.1.700
epSpecificCodecXCCDMinPTime Endpoint Specific X-CCD Clear Channel Minimum Packetization Period Configuration Lower boundary for the packetization period of the given codec. X-CCD Clear Channel -> (10 ms..30 ms) …	Unsigned32r/w Constraints: range: 10-30	.0.1600.1.100.1000.800.1.800
epSpecificCodecXCCDMaxPTime Endpoint Specific X-CCD Clear Channel Maximum Packetization Period Configuration Upper boundary for the packetization period of the given codec. X-CCD Clear Channel -> (10 ms..30 ms) …	Unsigned32r/w Constraints: range: 10-30	.0.1600.1.100.1000.800.1.900

Endpoint Specific Jitter Buffer Configuration
          
Endpoint specific configuration.

epSpecificJitterBufferEntry row .0.1600.1.200.400.1

A row in table Endpoint Specific Jitter Buffer Configuration
.

Indexes

epSpecificJitterBufferEpId

Column	Syntax	OID
epSpecificJitterBufferEpId Endpoint Identifier String that identifies an endpoint in other tables.	OctetString	.0.1600.1.200.400.1.100
epSpecificJitterBufferEnableConfig Enable Configuration Defines the configuration to use for a specific endpoint. * Disable: The endpoint uses the default configuration as defined in the DefaultJitterBufferLevel, D…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1600.1.200.400.1.200
epSpecificJitterBufferLevel Endpoint Specific Jitter Buffer Level Jitter is an abrupt and unwanted variation of one or more signal characteristics, such as the interval between successive pulses or the frequency or phase of successi…	Enumerationr/w Enumerated Values: 100 optimizeLatency 200 normal 300 optimizeQuality 400 faxModem 500 custom	.0.1600.1.200.400.1.300
epSpecificJitterBufferCustomMinLength Endpoint Specific Custom Jitter Buffer Minimal Length The jitter buffer minimal length (in milliseconds) is the delay the jitter buffer tries to maintain. The minimal jitter buffer MUST be …	Unsigned32r/w Constraints: range: 0-900	.0.1600.1.200.400.1.400
epSpecificJitterBufferCustomNomLength Endpoint Specific Custom Jitter Buffer Nominal Length The jitter buffer nominal length (in milliseconds) is the delay the jitter buffer uses when a call begins. The delay then varies according to network …	Unsigned32r/w Constraints: range: 0-900	.0.1600.1.200.400.1.410
epSpecificJitterBufferCustomMaxLength Endpoint Specific Custom Jitter Buffer Maximal Length The jitter buffer maximal length (in milliseconds) is the highest delay the jitter buffer is allowed to introduce. The maximal jitter b…	Unsigned32r/w Constraints: range: 0-900	.0.1600.1.200.400.1.500
epSpecificJitterBufferCustomVbdMinLength Endpoint Specific Custom Voiceband Data Jitter Buffer Minimal Length The jitter buffer minimal length (in milliseconds) is the delay the jitter buffer tries to maintain. See the CustomVbdJi…	Unsigned32r/w Constraints: range: 0-900	.0.1600.1.200.400.1.600
epSpecificJitterBufferCustomVbdNomLength Endpoint Specific Custom Voiceband Data Jitter Buffer Nominal Length The jitter buffer nominal length (in milliseconds) is the delay the jitter buffer uses when a call begins. The delay then varies depend…	Unsigned32r/w Constraints: range: 0-900	.0.1600.1.200.400.1.700
epSpecificJitterBufferCustomVbdMaxLength Endpoint Specific Custom Voiceband Data Jitter Buffer Maximal Length The jitter buffer maximal length (in milliseconds) is the highest delay the jitter buffer is allowed to introduce. The m…	Unsigned32r/w Constraints: range: 0-900	.0.1600.1.200.400.1.800
epSpecificJitterBufferCustomVbdJitterBufferType Endpoint Specific Custom Voiceband Data Jitter Buffer Type Algorithm to use for managing the jitter buffer during a call. CustomVbdNomLength serves as the delay at the beginning of the call and might be a…	Enumerationr/w Enumerated Values: 100 adaptiveImmediately 200 adaptiveSilence 300 fixed	.0.1600.1.200.400.1.900

Endpoint Specific Voice Codec Configuration
          
Endpoint specific configuration.

epSpecificDtmfTransportEntry row .0.1600.1.300.300.1

A row in table Endpoint Specific Voice Codec Configuration .

Indexes

epSpecificDtmfTransportEpId

Column	Syntax	OID
epSpecificDtmfTransportEpId Endpoint Identifier String that identifies an endpoint in other tables.	OctetString	.0.1600.1.300.300.1.100
epSpecificDtmfTransportEnableConfig Enable Configuration Defines the configuration to use for a specific endpoint. * Disable: The endpoint uses the default configuration as defined in the DefaultDtmfTransportMethod and …	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1600.1.300.300.1.200
epSpecificDtmfTransportMethod Endpoint Specific DTMF Transport Method Configuration Type of DTMF transport. * InBand: The DTMFs and voice are transmitted together in the RTP stream. Only reliable with G.711 or G.7…	Enumerationr/w Enumerated Values: 100 inBand 200 outOfBandUsingRtp 300 outOfBandUsingSignalingProtocol 400 signalingProtocolDependent	.0.1600.1.300.300.1.300
epSpecificDtmfTransportPayloadType Endpoint Specific DTMF Transport Payload Type Determines the actual RTP dynamic payload type used for telephone-event in an initial offer when selecting the 'OutOfBandUsingRtp' DTMF transport mode (see th…	Unsigned32r/w Constraints: range: 96-127	.0.1600.1.300.300.1.400

Codec vs. Bearer Capabilities Mapping
          
Codec to prioritize in the outgoing INVITE when the incoming SETUP's
ITC matches the configured one. The ITC value to set in the outgoing
SETUP's bearer capabilities when the incoming INVITE's codec matches
the configured one.

defaultCodecVsBearerCapabilitiesMappingEntry row .0.1600.1.500.100.1

A row in table Codec vs. Bearer Capabilities Mapping .

Indexes

defaultCodecVsBearerCapabilitiesMappingIndex

Column	Syntax	OID
defaultCodecVsBearerCapabilitiesMappingIndex Codec vs. Bearer Capabilities Index Index of the current Codec vs. Bearer match.	Unsigned32 Constraints: range: 1-3	.0.1600.1.500.100.1.100
defaultCodecVsBearerCapabilitiesMappingEnableMap Default Enable Map Defines if the outgoing codecs priority or selection should reflect the incoming ITC and vice versa. * Disable: The codecs order in the outgoing INVITE follows the …	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1600.1.500.100.1.200
defaultCodecVsBearerCapabilitiesMappingCodec Default Codec Priority The codec to be prioritized or selected in an outgoing INVITE when the incoming SETUP's ITC matches DefaultCodecVsBearerCapabilitiesMapping.InformationTransferCap. This codec is als…	Enumerationr/w Enumerated Values: 100 g711alaw 200 g711ulaw 250 g722 300 g723 400 g72616kbps 500 g72624kbps 600 g72632kbps 700 g72640kbps 800 g729 900 clearMode 1000 clearChannel 1100 xCCD	.0.1600.1.500.100.1.300
defaultCodecVsBearerCapabilitiesMappingInformationTransferCap Default Information TransferCap The ITC value to be set in the outgoing SETUP when the incoming INVITE's priority codec matches DefaultCodecVsBearerCapabilitiesMapping.Codec. This value is also checked ag…	Enumerationr/w Enumerated Values: 100 audio31kHz 200 speech 300 unrestricted	.0.1600.1.500.100.1.400
defaultCodecVsBearerCapabilitiesMappingMappingType Mapping Type * Prioritize: the DefaultCodecVsBearerCapabilitiesMapping.Codec is set on top of the list in an outgoing INVITE when the incoming SETUP's ITC matches DefaultCodecVsBearerCapabilitiesMap…	Enumerationr/w Enumerated Values: 100 prioritize 200 select	.0.1600.1.500.100.1.500

Endpoint Specific Security Configuration
          
Endpoint specific configuration.

epSpecificSecurityEntry row .0.1600.1.600.400.1

A row in table Endpoint Specific Security Configuration.

Indexes

epSpecificSecurityEpId

Column	Syntax	OID
epSpecificSecurityEpId Endpoint Identifier String that identifies an endpoint in other tables.	OctetString	.0.1600.1.600.400.1.100
epSpecificSecurityEnableConfig Enable Configuration Defines the configuration to use for a specific endpoint. * Disable: The endpoint uses the default configuration as defined in the DefaultSecurity. * Enable: Th…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1600.1.600.400.1.200
epSpecificSecurityRtpMode Endpoint Specific RTP Mode Defines the RTP payload mode (secure or not secure). * Unsecure: Only RTP. * Secure: Only SRTP. * SecureWithFallback: SRTP with RTP fallback if the peer …	Enumerationr/w Enumerated Values: 100 unsecure 200 secure 300 secureWithFallback	.0.1600.1.600.400.1.300
epSpecificSecurityKeyManagement Endpoint Specific Key Management Protocol Defines the key management protocol for SRTP. * Mikey: Use MIKEY (Multimedia Internet KEYing - RFC 3830). * Sdes: Use SDES (Security DEScriptio…	Enumerationr/w Enumerated Values: 100 mikey 200 sdes	.0.1600.1.600.400.1.350
epSpecificSecurityRtpEncryption Endpoint Specific Encryption Type Defines the encryption type to be used with SRTP. * Null: No encryption. Use only for debug. This value is ignored when the KeyManagement parameter i…	Enumerationr/w Enumerated Values: 100 null 200 aesCm128	.0.1600.1.600.400.1.400

Last Connections Statistics
          
Last 10 connections statistics.

lastConnectionsStatsEntry row .0.1600.1.700.100.1

A row in table Last Connections Statistics.

Indexes

lastConnectionsStatsConnectionsIndex

Column	Syntax	OID
lastConnectionsStatsConnectionsIndex Connections Index Last 10 connections identificator.	Unsigned32 Constraints: range: 1-10	.0.1600.1.700.100.1.100
lastConnectionsStatsOctetsTransmitted Octets Transmitted Number of octets transmitted during the connection.	MX-TC2MxUInt64 Type Constraints: range: 1..20	.0.1600.1.700.100.1.200
lastConnectionsStatsOctetsReceived Octets Received Number of octets received during the connection.	MX-TC2MxUInt64 Type Constraints: range: 1..20	.0.1600.1.700.100.1.300
lastConnectionsStatsPacketsTransmitted Packets Transmitted Number of packets transmitted during the connection..	MX-TC2MxUInt64 Type Constraints: range: 1..20	.0.1600.1.700.100.1.400
lastConnectionsStatsPacketsReceived Packets Received Number of packets received during the connection.	MX-TC2MxUInt64 Type Constraints: range: 1..20	.0.1600.1.700.100.1.500
lastConnectionsStatsPacketsLost Packets Lost Number of packets lost during the connection. This value is obtained by substracting the expected number of packets based on the sequence number from the number of packets received.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.1600.1.700.100.1.600
lastConnectionsStatsMinimumInterarrivalJitter Minimum Interarrival Jitter Minimum interarrival time, in milliseconds, during the connection. All RTP packets belonging to the connection and received at the RTP level are considered in the calculation.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.1600.1.700.100.1.700
lastConnectionsStatsMaximumInterarrivalJitter Maximum Interarrival Jitter Maximum interarrival time, in milliseconds, during the connection. All RTP packets belonging to the connection and received at the RTP level are considered in the calculation.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.1600.1.700.100.1.800
lastConnectionsStatsAverageInterarrivalJitter Average Interarrival Jitter Average interarrival time, in milliseconds, during the connection. All RTP packets belonging to the connection and received at the RTP level are considered in the calculation.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.1600.1.700.100.1.900
lastConnectionsStatsMinimumLatency Minimum Latency Minimum latency, in milliseconds, during the connection. The latency value is computed as one half of the round-trip time, as measured through RTCP.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.1600.1.700.100.1.1000
lastConnectionsStatsMaximumLatency Maximum Latency Maximum latency, in milliseconds, during the connection. The latency value is computed as one half of the round-trip time, as measured through RTCP.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.1600.1.700.100.1.1100
lastConnectionsStatsAverageLatency Average Latency Average latency, in milliseconds, during the connection. The latency value is computed as one half of the round-trip time, as measured through RTCP	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.1600.1.700.100.1.1200

Last Periods Statistics
          
Last 10 periods statistics.

lastPeriodsStatsEntry row .0.1600.1.700.200.1

A row in table Last Periods Statistics.

Indexes

lastPeriodsStatsPeriodIndex

Column	Syntax	OID
lastPeriodsStatsPeriodIndex Period Index Period identificator.	Unsigned32 Constraints: range: 1-10	.0.1600.1.700.200.1.100
lastPeriodsStatsOctetsTransmitted Octets Transmitted Number of octets transmitted during the collection period. This value is obtained by cumulating the octets transmitted in all connections that were active during the collection period.	MX-TC2MxUInt64 Type Constraints: range: 1..20	.0.1600.1.700.200.1.200
lastPeriodsStatsOctetsReceived Octets Received Number of octets received during the collection period. This value is obtained by cumulating the octets received in all connections that were active during the collection period.	MX-TC2MxUInt64 Type Constraints: range: 1..20	.0.1600.1.700.200.1.300
lastPeriodsStatsPacketsTransmitted Packets Transmitted Number of packets transmitted during the collection period. This value is obtained by cumulating the packets transmitted in all connections that were active during the collection perio…	MX-TC2MxUInt64 Type Constraints: range: 1..20	.0.1600.1.700.200.1.400
lastPeriodsStatsPacketsReceived Packets Received Number of packets received during the collection period. This value is obtained by cumulating the packets received in all connections that were active during the collection period.	MX-TC2MxUInt64 Type Constraints: range: 1..20	.0.1600.1.700.200.1.500
lastPeriodsStatsPacketsLost Packets Lost Number of packets lost during the collection period. This value is obtained by cumulating the packets lost in all connections that were active during the collection period.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.1600.1.700.200.1.600
lastPeriodsStatsMinimumInterarrivalJitter Minimum Interarrival Jitter Minimum interarrival time, in milliseconds, during the collection period. This value is the lowest interarrival jitter for all connections that were active during the collectio…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.1600.1.700.200.1.700
lastPeriodsStatsMaximumInterarrivalJitter Maximum Interarrival Jitter Maximum interarrival time, in milliseconds, during the collection period. This value is the highest interarrival jitter for all connections that were active during the collecti…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.1600.1.700.200.1.800
lastPeriodsStatsAverageInterarrivalJitter Average Interarrival Jitter Average interarrival time, in milliseconds, during the collection period. This value is the weighted average of the interarrival jitter for all connections that were active dur…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.1600.1.700.200.1.900
lastPeriodsStatsMinimumLatency Minimum Latency Minimum latency, in milliseconds, during the collection period. This value is the lowest latency for all connections that were active during the collection period.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.1600.1.700.200.1.1000
lastPeriodsStatsMaximumLatency Maximum Latency Maximum latency, in milliseconds, during the collection period. This value is the highest latency for all connections that were active during the collection period.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.1600.1.700.200.1.1100
lastPeriodsStatsAverageLatency Average Latency Average latency, in milliseconds, during the collection period. This value is the weighted average of the latency for all connections that were active during the collection period. For eac…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.1600.1.700.200.1.1200
lastPeriodsStatsPeriodBeginning Period Start Date and time of the collection period beginning.	OctetString	.0.1600.1.700.200.1.1300
lastPeriodsStatsPeriodEnd Period End Date and time of the collection period end.	OctetString	.0.1600.1.700.200.1.1400

Channel Statistics
          
Statistics per endpoint/channel since last reboot or
statistics reset.

channelStatisticsEntry row .0.1600.1.700.250.1

A row in table Channel Statistics.

Indexes

channelStatisticsEpChannelId

Column	Syntax	OID
channelStatisticsEpChannelId Endpoint and channel Identifier String that identifies the combination of an endpoint and a channel. The endpoint name is the same as the EpId used to refer to endpoints in other tables. On endpoints with…	OctetString	.0.1600.1.700.250.1.100
channelStatisticsPacketsSent Packets Sent Number of packets transmitted on the channel since service start. This value is obtained by cumulating the packets transmitted in all the connections that ended during the collection period.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.1600.1.700.250.1.200
channelStatisticsPacketsReceived Packets Received Number of packets received on the channel since service start. This value is obtained by cumulating the packets received in all the connections that ended during the collection period.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.1600.1.700.250.1.300
channelStatisticsBytesSent Bytes Sent Number of bytes transmitted on the channel since service start. This value is obtained by cumulating the bytes transmitted in all the connections that ended during the collection period.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.1600.1.700.250.1.400
channelStatisticsBytesReceived Bytes Received Number of bytes received on the channel since service start. This value is obtained by cumulating the bytes received in all the connections that ended during the collection period.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.1600.1.700.250.1.500
channelStatisticsAverageReceiveInterarrivalJitter Average Receive Interarrival Jitter Average interarrival time, in microseconds, for the channel since service start. This value is based on the average interarrival jitter of each call ended during the co…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.1600.1.700.250.1.600
channelStatisticsReset Reset Sets all the values of the row to zero.	Enumerationr/w Enumerated Values: 0 noOp 10 reset	.0.1600.1.700.250.1.900