MX-ETH-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
6
Rows
6
Columns
21
.0.2400.1.25 · 1 row entry · 3 columns
Uses the media5 variant from /opt/observium/mibs/media5.
Command help
Walk linkStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MX-ETH-MIB' -M '/opt/observium/mibs/media5:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MX-ETH-MIB::linkStatusTable'
Ethernet Links Status
          
This table displays the status of all Ethernet links available
on the mainboard.
linkStatusEntry row .0.2400.1.25.1
A row in table Ethernet Links Status.
Column Syntax OID
Link Interface

Name of the link interface.
OctetString .0.2400.1.25.1.100
Link Type

Type of link interface.
OctetString .0.2400.1.25.1.200
Interface Status

Indicates the status of the Ethernet link interface.

* Disconnected: The link interface is physically
disconnected.
* Up: The link interface is physically connected…
Enumeration
Enumerated Values:
100disconnected
200up
.0.2400.1.25.1.300

linksTable

table
.0.2400.1.50 · 1 row entry · 4 columns
Uses the media5 variant from /opt/observium/mibs/media5.
Command help
Walk linksTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MX-ETH-MIB' -M '/opt/observium/mibs/media5:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MX-ETH-MIB::linksTable'
Ethernet Links Settings
          
This table configures the Ethernet links of the mainboard.
linksEntry row .0.2400.1.50.1
A row in table Ethernet Links Settings.
Indexes
Column Syntax OID
Link Name

The name of the Ethernet link.
OctetString .0.2400.1.50.1.100
MTU

Configures the MTU (Maximum Transmission Unit) of a specific
Ethernet link. The range is from 576 to 1500 bytes. All VLAN
connections use the MTU size configured on their related
Ethernet link.
Unsigned32r/w
Constraints:
range: 576-1500
.0.2400.1.50.1.200
IEEE 802.1x Authentication

Configures the IEEE 802.1x authentication protocol activation
on the Ethernet link interface.

* Disable: The IEEE 802.1x authentication protocol is
disabled…
Enumerationr/w
Enumerated Values:
100disable
200enable
.0.2400.1.50.1.300
Virtual Switch

Configures the link as a virtual switch.

* Disable: The link cannot be used to provide network access
to virtual machines.
* Enable: The link can be used to provide n…
MX-TCMxEnableStater/w
Type Values:
0disable
1enable
.0.2400.1.50.1.400
.0.2400.1.100 · 1 row entry · 3 columns
Uses the media5 variant from /opt/observium/mibs/media5.
Command help
Walk portsStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MX-ETH-MIB' -M '/opt/observium/mibs/media5:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MX-ETH-MIB::portsStatusTable'
Ethernet Ports Status
          
This table displays the status of all Ethernet connectors of the
mainboard.
portsStatusEntry row .0.2400.1.100.1
A row in table Ethernet Ports Status.
Indexes
Column Syntax OID
Port Name

The name of the Ethernet port.
OctetString .0.2400.1.100.1.100
Link Name

The link interface associated with this port.
OctetString .0.2400.1.100.1.200
Speed

Indicates the speed, duplex, and state of the connection.

* Disconnected: This port is physically disconnected.
* Half10: This port is connected at 10 Mbit/s Half-duplex.
* Full…
Enumeration
Enumerated Values:
0disconnected
100half10
200full10
300half100
400full100
500full1000
.0.2400.1.100.1.300

portsTable

table
.0.2400.1.200 · 1 row entry · 2 columns
Uses the media5 variant from /opt/observium/mibs/media5.
Command help
Walk portsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MX-ETH-MIB' -M '/opt/observium/mibs/media5:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MX-ETH-MIB::portsTable'
Ethernet Ports Settings
          
This table configures the Ethernet ports of the mainboard.
portsEntry row .0.2400.1.200.1
A row in table Ethernet Ports Settings.
Indexes
Column Syntax OID
Port Name

The name of the Ethernet port.
OctetString .0.2400.1.200.1.100
Speed

Configures the speed and duplex of the connection.

* Auto: Automatic negociation of speed and duplex.
* Half10: 10 Mbit/s Half-duplex.
* Full10: 10 Mbit/s Full-duplex.
* Half1…
Enumerationr/w
Enumerated Values:
100auto
200half10
300full10
400half100
500full100
600full1000
.0.2400.1.200.1.200

vlanTable

table
.0.2400.1.300 · 1 row entry · 6 columns
Uses the media5 variant from /opt/observium/mibs/media5.
Command help
Walk vlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MX-ETH-MIB' -M '/opt/observium/mibs/media5:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MX-ETH-MIB::vlanTable'
Ethernet VLAN Settings
          
This table configures the Ethernet Virtual LAN interfaces of the
system.
vlanEntry row .0.2400.1.300.1
A row in table Ethernet VLAN Settings.
Indexes
Column Syntax OID
Idx

Unique identifier of the row in the table.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.0.2400.1.300.1.50
Link Name

Name of the Ethernet link used by the VLAN interface.
OctetStringr/w
Constraints:
range: 0-10
.0.2400.1.300.1.100
Vlan ID

VLAN ID used by the VLAN interface.
Unsigned32r/w
Constraints:
range: 0-4094
.0.2400.1.300.1.200
Default User Priority

Default User Priority value the interface uses when tagging
packets. Specific service class values may be set in the Local
Quality of Service (LQos) ServiceClasses table.
Unsigned32r/w
Constraints:
range: 0-7
.0.2400.1.300.1.300
Config Status

Configuration status of the row.

It indicates whether the configuration of the row is valid or
not.

* ValidConfig: This entry is valid.
* InvalidLinkName: T…
Enumeration
Enumerated Values:
100validConfig
200invalidLinkName
300invalidVlanId
400duplicateLinkVlanId
.0.2400.1.300.1.350
Delete

Deletes the VLAN interface and removes it from the system.
Enumerationr/w
Enumerated Values:
0noOp
10delete
.0.2400.1.300.1.400

eapTable

table
.0.2400.1.10000.100 · 1 row entry · 3 columns
Uses the media5 variant from /opt/observium/mibs/media5.
Command help
Walk eapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MX-ETH-MIB' -M '/opt/observium/mibs/media5:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MX-ETH-MIB::eapTable'
Extensible Authentication Protocol (EAP)
          
This table configures the EAP settings.
eapEntry row .0.2400.1.10000.100.1
A row in table Extensible Authentication Protocol (EAP).
Indexes
Column Syntax OID
Link Name

The name of the Ethernet link.
OctetString .0.2400.1.10000.100.1.100
EAP Username

Username used to authenticate each Ethernet link interfaces
during the IEEE 802.1x EAP-TLS authentication process. This
parameter is used only when the IEEE 802.1x authentication is
enabled (…
OctetStringr/w
Constraints:
range: 0-64
.0.2400.1.10000.100.1.200
EAP Certificate Validation

Level of validation used by the device to authenticate the
IEEE 802.1x EAP-TLS peer's certificate. This parameter
controls also the criteria used to select the host
certificate …
Enumerationr/w
Enumerated Values:
100noValidation
200trustedAndValid
.0.2400.1.10000.100.1.300