MX-CORNET-SYSTEM-MIB
This MIB contains CorNet system configuration objects for CorNet units.
- Source file
MX-CORNET-SYSTEM-MIB- Last revised
- Identity
corNetSystemMIB- Base OID
1.3.6.1.4.1.4935.20.40.1
Imported Objects
| MX-CORNET-MIB | corNet ipAddressConfigCorNet ipAddressConfigCorNetStatic ipAddressStatusCorNet |
| MX-SMI | ipAddressConfig ipAddressStatus mediatrixMgmt |
| MX-TC | MxAdvancedIpPort MxEnableState MxIpHostName MxIpPort |
| RFC1213-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32 |
Net-SNMP examples using the media5 MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'MX-CORNET-SYSTEM-MIB' -M '/opt/observium/mibs/media5:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'MX-CORNET-SYSTEM-MIB::corNetSystemMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MX-CORNET-SYSTEM-MIB' -M '/opt/observium/mibs/media5:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MX-CORNET-SYSTEM-MIB::corNetSystemMIB'
Objects (65)
Showing 65 of 65 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.4935.10.1.130.10 |
||
.1.3.6.1.4.1.4935.10.1.130.10.1 |
||
.1.3.6.1.4.1.4935.10.1.130.10.1.10 |
||
.1.3.6.1.4.1.4935.10.1.130.10.1.20 |
||
.1.3.6.1.4.1.4935.10.1.130.20 |
||
.1.3.6.1.4.1.4935.10.1.130.30 |
||
.1.3.6.1.4.1.4935.10.80 |
||
|
Enumeration
|
.1.3.6.1.4.1.4935.10.80.10 |
|
|
Enumeration
|
.1.3.6.1.4.1.4935.10.80.5 |
|
.1.3.6.1.4.1.4935.15.1.130.10.10 |
||
.1.3.6.1.4.1.4935.15.1.130.10.10.1 |
||
.1.3.6.1.4.1.4935.15.1.130.10.10.1.10 |
||
.1.3.6.1.4.1.4935.15.1.130.10.10.1.20 |
||
.1.3.6.1.4.1.4935.15.1.130.10.20 |
||
.1.3.6.1.4.1.4935.15.1.130.10.30 |
||
.1.3.6.1.4.1.4935.20.40.1 |
||
.1.3.6.1.4.1.4935.20.40.1.1 |
||
.1.3.6.1.4.1.4935.20.40.1.1.10 |
||
.1.3.6.1.4.1.4935.20.40.1.1.10.10 |
||
.1.3.6.1.4.1.4935.20.40.1.1.10.10.1 |
||
|
OctetString
|
.1.3.6.1.4.1.4935.20.40.1.1.10.10.1.10 |
|
|
OctetString
|
.1.3.6.1.4.1.4935.20.40.1.1.10.10.1.20 |
|
.1.3.6.1.4.1.4935.20.40.1.1.100 |
||
.1.3.6.1.4.1.4935.20.40.1.1.100.100 |
||
.1.3.6.1.4.1.4935.20.40.1.1.100.100.1 |
||
|
OctetString
|
.1.3.6.1.4.1.4935.20.40.1.1.100.100.1.10 |
|
.1.3.6.1.4.1.4935.20.40.1.1.100.100.1.15 |
||
|
Unsigned32
|
.1.3.6.1.4.1.4935.20.40.1.1.100.100.1.20 |
|
|
OctetString
|
.1.3.6.1.4.1.4935.20.40.1.1.100.100.1.25 |
|
|
Enumeration
|
.1.3.6.1.4.1.4935.20.40.1.1.100.100.1.30 |
|
|
Unsigned32
|
.1.3.6.1.4.1.4935.20.40.1.1.100.100.1.35 |
|
|
Unsigned32
|
.1.3.6.1.4.1.4935.20.40.1.1.100.100.1.5 |
|
.1.3.6.1.4.1.4935.20.40.1.1.100.150 |
||
|
Enumeration
|
.1.3.6.1.4.1.4935.20.40.1.1.100.200 |
|
|
Unsigned32
|
.1.3.6.1.4.1.4935.20.40.1.1.100.250 |
|
|
OctetString
|
.1.3.6.1.4.1.4935.20.40.1.1.100.300 |
|
|
Unsigned32
|
.1.3.6.1.4.1.4935.20.40.1.1.100.350 |
|
.1.3.6.1.4.1.4935.20.40.1.1.20 |
||
.1.3.6.1.4.1.4935.20.40.1.1.20.10 |
||
.1.3.6.1.4.1.4935.20.40.1.1.20.10.1 |
||
|
OctetString
|
.1.3.6.1.4.1.4935.20.40.1.1.20.10.1.10 |
|
.1.3.6.1.4.1.4935.20.40.1.1.25 |
||
.1.3.6.1.4.1.4935.20.40.1.1.25.10 |
||
.1.3.6.1.4.1.4935.20.40.1.1.25.10.1 |
||
|
OctetString
|
.1.3.6.1.4.1.4935.20.40.1.1.25.10.1.10 |
|
|
Enumeration
|
.1.3.6.1.4.1.4935.20.40.1.1.25.10.1.50 |
|
.1.3.6.1.4.1.4935.20.40.1.1.30 |
||
.1.3.6.1.4.1.4935.20.40.1.1.30.10 |
||
|
Unsigned32
|
.1.3.6.1.4.1.4935.20.40.1.1.30.20 |
|
|
Unsigned32
|
.1.3.6.1.4.1.4935.20.40.1.1.30.30 |
|
|
Unsigned32
|
.1.3.6.1.4.1.4935.20.40.1.1.30.40 |
|
|
Unsigned32
|
.1.3.6.1.4.1.4935.20.40.1.1.30.50 |
|
|
Unsigned32
|
.1.3.6.1.4.1.4935.20.40.1.1.30.60 |
|
.1.3.6.1.4.1.4935.20.40.1.1.50 |
||
.1.3.6.1.4.1.4935.20.40.1.1.50.10 |
||
.1.3.6.1.4.1.4935.20.40.1.1.50.10.1 |
||
.1.3.6.1.4.1.4935.20.40.1.1.50.10.1.150 |
||
|
Unsigned32
|
.1.3.6.1.4.1.4935.20.40.1.1.50.10.1.50 |
|
|
Unsigned32
|
.1.3.6.1.4.1.4935.20.40.1.1.50.10.1.70 |
|
|
Unsigned32
|
.1.3.6.1.4.1.4935.20.40.1.1.50.10.1.90 |
|
.1.3.6.1.4.1.4935.20.40.1.2 |
||
.1.3.6.1.4.1.4935.20.40.1.2.1 |
||
.1.3.6.1.4.1.4935.20.40.1.2.2 |
||
.1.3.6.1.4.1.4935.20.40.1.3 |
||
.1.3.6.1.4.1.4935.20.40.1.3.5 |
Dependencies (10) 6 direct · 4 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- MX-SMImedia5
- SNMPv2-TCrfc
- IANAifType-MIBrfc
- RFC-1212rfc
- RFC1155-SMIrfc
- RFC1213-MIBrfc
- SNMPv2-CONFrfc
- MX-CORNET-MIBmedia5
- MX-TCmedia5
- MX-CORNET-SYSTEM-MIBmedia5selected
Conformance Groups (7)
Compliance Statements (1)
OID
.1.3.6.1.4.1.4935.20.40.1.2.1.5This is a list of conformance groups. These conformance groups contain the name
of objects necessary to adequately configure a CorNet unit.
of objects necessary to adequately configure a CorNet unit.
Required groups
| mandatory | corNetSystemRegistrationGroupVer1 | |
| mandatory | corNetSystemInitializationGroupVer1 | |
| mandatory | corNetSystemSecurityGroupVer1 | |
| mandatory | corNetSystemFaultManagementGroupVer1 | |
| mandatory | corNetSystemDataGroupVer1 | |
| mandatory | corNetSystemServicesGroupVer1 |
Notifications / Traps (5)
| Name | OID | Description |
|---|---|---|
|
sysObjectID (unresolved reference) sysMacAddress (unresolved reference)
|
.1.3.6.1.4.1.4935.20.40.1.3.5.1050 |
Indicates to the Fault Management Host that the unit has rebooted
This trap includes the sysObjectID and sysMacAddress. |
|
sysObjectID (unresolved reference) sysMacAddress (unresolved reference)
|
.1.3.6.1.4.1.4935.20.40.1.3.5.1150 |
Indicates to the Fault Management Host that an SNMP authentication failure
occurred. This trap includes the sysObjectID and sysMacAddress. |
|
sysObjectID (unresolved reference) sysMacAddress (unresolved reference)
|
.1.3.6.1.4.1.4935.20.40.1.3.5.1250 |
Indicates to the Fault Management Host that the LAN error was detected.
This trap includes the sysObjectID and the sysMacAddress. |
|
sysObjectID (unresolved reference) sysMacAddress (unresolved reference) corNetFaultManagementPacketsLostStatus
|
.1.3.6.1.4.1.4935.20.40.1.3.5.1350 |
Indicates to the Fault Management Host that:
1) the corNetSystemFaultManagementTrapsMaximumPacketsLostRatio has been exceeded. OR 2) the RTP packets lost ratio returns within the normal limit (i.e. under the value of corNetSystemFaultManagementTrapsMaximumPacketsLostRatio). A packet lost trap indicating condition #2 is sent only if a packet lost trap indicating condition #1 has been previously sent. condition #1 is indicated by: corNetFaultManagementPacketsLostStatus = error (1) condition #2 is indicated by: corNetFaultManagementPacketsLostStatus = normal (0) This trap includes the sysObjectID, the sysMacAddress and the corNetFaultManagementPacketsLostStatus. |
|
sysObjectID (unresolved reference) sysMacAddress (unresolved reference) corNetFaultManagementJitterBufferStatus
|
.1.3.6.1.4.1.4935.20.40.1.3.5.1450 |
Indicates to the Fault Management Host that:
1) the corNetSystemFaultManagementTrapsMaximumJitterBufferOverrunRatio has been exceeded. OR 2) the corNetSystemFaultManagementTrapsMaximumJitterBufferUnderrunRatio has been exceeded. OR 3) the overrun/underrun ratios return within the normal limit (i.e. under the value of corNetSystemFaultManagementTrapsMaximumJitterBufferOverrunRatio and corNetSystemFaultManagementTrapsMaximumJitterBufferUnderrunRatio). A jitter buffer trap indicating condition #3 is sent only if a jitter buffer trap indicating condition #1 or #2 has been previously sent. condition #1 is indicated by: corNetFaultManagementJitterBufferStatus = overrun (1) condition #2 is indicated by: corNetFaultManagementJitterBufferStatus = underrun (2) condition #3 is indicated by: corNetFaultManagementJitterBufferStatus = normal (0) This trap includes the sysObjectID, the sysMacAddress and the corNetFaultManagementJitterBufferStatus. |