MWRM-UNIT-MIB Table View

This table shows the status of the NTP (Network Time Protocol).

genEquipUnitInfoNtpStatusEntry row .1.3.6.1.4.1.2281.10.1.1.11.6.6.1

Entry containing the data of the NTP status.

Indexes

genEquipUnitInfoNtpStatusIndex

Column	Syntax	OID
genEquipUnitInfoNtpStatusIndex Index of the table.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.1.1.11.6.6.1.1
genEquipUnitInfoNtpStatusPollInterval Indicates the time interval in minutes in which the NTP client polls the server it is locked to.	Integer32 Constraints: range: 0-1024	.1.3.6.1.4.1.2281.10.1.1.11.6.6.1.2
genEquipUnitInfoNtpStatusSyncServerIP he IPv4 address of the NTP server that the client is currently locked on.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2281.10.1.1.11.6.6.1.3
genEquipUnitInfoNtpStatusLockState Indicates the NTP client lock status.	Enumeration Enumerated Values: 0 none 1 local 2 locked	.1.3.6.1.4.1.2281.10.1.1.11.6.6.1.4

This table allows the configuration of the NTP (Network Time Protocol).

genEquipUnitInfoNtpConfigEntry row .1.3.6.1.4.1.2281.10.1.1.11.6.7.1

Entry containing the data of the NTP configuration.

Indexes

genEquipUnitInfoNtpConfigIndex

Column	Syntax	OID
genEquipUnitInfoNtpConfigIndex Index of the table.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.1.1.11.6.7.1.1
genEquipUnitInfoNtpConfigAdmin The administrative state of the NTP (Network Time Protocol) feature.	EnableDisabler/w Type Values: 2 enable 3 disable	.1.3.6.1.4.1.2281.10.1.1.11.6.7.1.2
genEquipUnitInfoNtpConfigVersion The NTP (Network Time Protocol) version that is being used.	Enumerationr/w Enumerated Values: 1 ntpv3 2 ntpv4	.1.3.6.1.4.1.2281.10.1.1.11.6.7.1.3
genEquipUnitInfoNtpConfigServerIPaddress1 NTP server IPv4 address that is required in first priority.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2281.10.1.1.11.6.7.1.4
genEquipUnitInfoNtpConfigServerIPaddress2 NTP server IPv4 address that is required in second priority.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2281.10.1.1.11.6.7.1.5

This table contains the time services properties.

genEquipUnitInfoTimeServicesEntry row .1.3.6.1.4.1.2281.10.1.1.11.12.1

This table entry contains the time services properties.

Indexes

genEquipUnitInfoTimeServicesIndex

Column	Syntax	OID
genEquipUnitInfoTimeServicesIndex The index of the table.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.1.1.11.12.1.1
genEquipUnitInfoTimeServicesUtcHours The required hours offset relative to the UTC (Universal Time Coordinated).	Integer32r/w Constraints: range: -12-13	.1.3.6.1.4.1.2281.10.1.1.11.12.1.2
genEquipUnitInfoTimeServicesUtcMinutes The required minutes offset relative to the UTC (Universal Time Coordinated).	Integer32r/w Constraints: range: 0-59	.1.3.6.1.4.1.2281.10.1.1.11.12.1.3
genEquipUnitInfoTimeServicesDstStartMonth The month when the DST (Daylight Saving Time) is required to start.	Integer32r/w Constraints: range: 1-12	.1.3.6.1.4.1.2281.10.1.1.11.12.1.4
genEquipUnitInfoTimeServicesDstStartDay The day when the DST (Daylight Saving Time) is required to start.	Integer32r/w Constraints: range: 1-31	.1.3.6.1.4.1.2281.10.1.1.11.12.1.5
genEquipUnitInfoTimeServicesDstEndMonth The month when the DST (Daylight Saving Time) is required to end.	Integer32r/w Constraints: range: 1-12	.1.3.6.1.4.1.2281.10.1.1.11.12.1.6
genEquipUnitInfoTimeServicesDstEndDay The day when the DST (Daylight Saving Time) is required to end.	Integer32r/w Constraints: range: 1-31	.1.3.6.1.4.1.2281.10.1.1.11.12.1.7
genEquipUnitInfoTimeServicesDstOffset The required offset for DST (Daylight Saving Time) in hours.	Integer32r/w Constraints: range: 0-23	.1.3.6.1.4.1.2281.10.1.1.11.12.1.8
genEquipUnitInfoTimeServicesUtcDateAndTime UTC (Universal Time Coordinated) date and time.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.1.1.11.12.1.9
genEquipUnitInfoTimeServicesUtcCurrentDateAndTime The calculated current local date & time based on the local clock, UTC and DST (Daylight Saving Time) configurations.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.1.1.11.12.1.10

inventory common table.

genEquipInventoryEntry row .1.3.6.1.4.1.2281.10.1.2.10.1.1

inventory common table Entry.

Indexes

genEquipInventorySlotIndex

Column	Syntax	OID
genEquipInventorySlotIndex slot index.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.1.2.10.1.1.1
genEquipInventoryCardName Card name.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.2281.10.1.2.10.1.1.2
genEquipInventoryCardType Card type.	InventoryCardType Type Values: 0 cleared 10 nexusSc 11 nexusScLp 12 nexusDc 13 nexusQc 19 tccR 20 tccA 21 tccB 22 rmcA 23 rmcB 24 rmcNDc 25 nativeTdm16xE1T1 26 pwe3-16xE1T1 27 tdm1xStm1 28 tdm1xOc3 29 eLicEth4x1GEA 30 chassis1U2U 31 capacityBooster 32 pwe3-1xSTM1 33 pdc48v2uSingleFeed 34 pdc48v1uSingleFeed 35 pdc48v1uDualFeed 36 fan2U 37 fan1U 38 test-card 39 pdc24v2uSingleFeed 40 pdc24v1uSingleFeed 41 pdc24v1uDualFeed 42 unknownCard 43 ricE 44 trafficFpga 45 essFpga 46 tressFpga 47 ip20g 48 licXe4opt 49 tccBmc 50 rmcE 51 licStm1oc3rst 52 tccAmc 53 ip20cEband 54 tccA2 55 tccA2mc 56 tccB2	.1.3.6.1.4.1.2281.10.1.2.10.1.1.3
genEquipInventoryCardSubType Card sub type.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.1.2.10.1.1.4
genEquipInventoryPartNumber Part number.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.2281.10.1.2.10.1.1.5
genEquipInventorySerialNumber Serial number.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.2281.10.1.2.10.1.1.6
genEquipInventoryNumberWorkingDays Number of working days.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.1.2.10.1.1.7

This table shows for each feature what is its valid license and whether the license has been violated or not.

genEquipUnitLicenseFeatureEntry row .1.3.6.1.4.1.2281.10.1.3.16.1

This table entry shows for each feature what is its valid license and whether the license has been violated or not.

Indexes

genEquipUnitLicenseFeatureId

Column	Syntax	OID
genEquipUnitLicenseFeatureId A unique number which indicates the Id of the feature	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.1.3.16.1.1
genEquipUnitLicenseFeatureName The name of the feature.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.2281.10.1.3.16.1.2
genEquipUnitLicenseFeatureDescription A short description of the feature.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.2281.10.1.3.16.1.3
genEquipUnitLicenseFeatureIsUsed Indicates whether the licensed feature is actually in used or its quantity that currently is in use.	LicenseGeneric Type Values: 100000 not-allowed 100001 allowed 100010 disable 100011 enable 100020 only-management 100021 smart-pipe 100022 enhanced-pipe 100023 edge-cet 100024 access-cet 100025 aggregation-cet	.1.3.6.1.4.1.2281.10.1.3.16.1.4
genEquipUnitLicenseFeatureIsAllowed Indicates whether a licensed feature is allowed.	LicenseGeneric Type Values: 100000 not-allowed 100001 allowed 100010 disable 100011 enable 100020 only-management 100021 smart-pipe 100022 enhanced-pipe 100023 edge-cet 100024 access-cet 100025 aggregation-cet	.1.3.6.1.4.1.2281.10.1.3.16.1.5
genEquipUnitLicenseViolationStatus Indicates whether the actual configuration violates the feature license.	Enumeration Enumerated Values: 0 ok 1 violated	.1.3.6.1.4.1.2281.10.1.3.16.1.6

External input alarm table.
Using the table to manage the admin state of the external input alarm (Enable or Disable it).
 Set a description and severity.

genEquipUnitAlarmInputEntry row .1.3.6.1.4.1.2281.10.1.4.1.1.1

External input alarm table.
Using the table to manage the admin state of the external input alarm (Enable or Disable it).
Set a description and severity.

Indexes

genEquipUnitAlarmInputCounter

Column	Syntax	OID
genEquipUnitAlarmInputCounter External input alarm table index.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.1.4.1.1.1.1
genEquipUnitAlarmInputAdmin The Admin state of the External input alarm table.	EnableDisableSMI2r/w Type Values: 0 disable 1 enable	.1.3.6.1.4.1.2281.10.1.4.1.1.1.2
genEquipUnitAlarmInputText External input alarm description.	OctetStringr/w Constraints: range: 0-99	.1.3.6.1.4.1.2281.10.1.4.1.1.1.3
genEquipUnitAlarmInputSeverity External input alarm severity.	InputSeverityr/w Type Values: 0 indeterminate 1 critical 2 major 3 minor 4 warning	.1.3.6.1.4.1.2281.10.1.4.1.1.1.4
genEquipUnitAlarmInputState The state, raised or cleared, of the external alarm input.	OffOn Type Values: 0 off 1 on	.1.3.6.1.4.1.2281.10.1.4.1.1.1.5

External output alarm table. using the table to manage the admin state of the external input alarm
, read the status and set an output group.

genEquipUnitAlarmOutputEntry row .1.3.6.1.4.1.2281.10.1.4.2.1.1

External output alarm table. using the table to manage the admin state of the external input alarm
, read the status and set an output group.

Indexes

genEquipUnitAlarmOutputCounter

Column	Syntax	OID
genEquipUnitAlarmOutputCounter External output alarm table index.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.1.4.2.1.1.1
genEquipUnitAlarmOutputAdmin The Admin state of the External output alarm. When 'Enabled', the functionality will be: (i) If no alarms are raised, the N.O. (normally open) contact will be opened, while the N.C. (normally closed) contact will be…	Enumerationr/w Enumerated Values: 0 disable 1 enable 2 test	.1.3.6.1.4.1.2281.10.1.4.2.1.1.2
genEquipUnitAlarmOutputStatus The current stauts of the External output alarm table.	Enumeration Enumerated Values: 0 off 1 on 2 on-test	.1.3.6.1.4.1.2281.10.1.4.2.1.1.3
genEquipUnitAlarmOutputGroup The description of the group to which the external output alarm belongs.	Enumerationr/w Enumerated Values: 1 communication 2 quality-of-service 3 processing 4 equipment 5 environmental 6 all-groups	.1.3.6.1.4.1.2281.10.1.4.2.1.1.4

This table contains information about the IDUs that may be in the shelf (population, communication status, most severe alarm) and
provides the ability to backup/restore SW for each IDU.
	    Relevant only for main units.

genEquipUnitShelfManagmentEntry row .1.3.6.1.4.1.2281.10.1.5.5.1

This table keeps the shelf information on all the modules in the shelf (population, status, most severe alarm) and
provides the ability for backup/restore command or SW download.
Relevant only for main units.

Indexes

genEquipUnitShelfManagmentSlot

Column	Syntax	OID
genEquipUnitShelfManagmentSlot This value is the slot number used as an index for this table.	SlotId Type Values: 0 standalone 1 slot1 2 slot2 3 slot3 4 slot4 5 slot5 6 slot6 7 slot7 8 slot8 9 slot9 10 slot10 11 slot11 12 slot12	.1.3.6.1.4.1.2281.10.1.5.5.1.1
genEquipUnitShelfManagmentSlotPopulation Slot population state, which indicates if the slot is occupied or not. Relevant only for main units.	Enumeration Enumerated Values: 0 not-present 1 present	.1.3.6.1.4.1.2281.10.1.5.5.1.2
genEquipUnitShelfManagmentCommunicationStatus This value indicates if the slot can be reached or not. Relevant only for main units.	Enumeration Enumerated Values: 0 communicationDown 1 communicationUp	.1.3.6.1.4.1.2281.10.1.5.5.1.3
genEquipUnitShelfManagmentSlotMostSevereAlarm This value is the most severe alarm for the module on this slot. Relevant only for main unit.	Severity Type Values: 0 indeterminate 1 critical 2 major 3 minor 4 warning 5 cleared	.1.3.6.1.4.1.2281.10.1.5.5.1.4
genEquipUnitShelfManagmentMngSwCommand The command to be executed to manage SW versions. Relevant only for main units. Possible values are: - noOperation(0) - downloadUpgradeVersion(1) - upgrade(2) - rollback(3) - downgrade(4) - downloadDowngradeVersio…	SwCommandr/w Type Values: 0 noOperation 1 downloadUpgradeVersion 2 upgrade 3 rollback 4 downgrade 5 downloadDowngradeVersion	.1.3.6.1.4.1.2281.10.1.5.5.1.5
genEquipUnitShelfManagmentSlotReset This parameter Allows resetting specific unit according to genEquipUnitShelfManagmentSlot table index.	OffOnr/w Type Values: 0 off 1 on	.1.3.6.1.4.1.2281.10.1.5.5.1.6
genEquipUnitShelfManagmentSlotIp Slot SNMP Management IP address.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2281.10.1.5.5.1.7

Slot configuration table.

genEquipUnitShelfSlotConfigEntry row .1.3.6.1.4.1.2281.10.1.5.8.1

This table allows configuration of card population parameters.

Indexes

genEquipUnitShelfSlotConfigSlotID

Column	Syntax	OID
genEquipUnitShelfSlotConfigSlotID This value is the slot number used as an index for this table.	SlotId Type Values: 0 standalone 1 slot1 2 slot2 3 slot3 4 slot4 5 slot5 6 slot6 7 slot7 8 slot8 9 slot9 10 slot10 11 slot11 12 slot12	.1.3.6.1.4.1.2281.10.1.5.8.1.1
genEquipUnitShelfSlotConfigExpectedCardType Expected card type in current slot.	InventoryCardTyper/w Type Values: 0 cleared 10 nexusSc 11 nexusScLp 12 nexusDc 13 nexusQc 19 tccR 20 tccA 21 tccB 22 rmcA 23 rmcB 24 rmcNDc 25 nativeTdm16xE1T1 26 pwe3-16xE1T1 27 tdm1xStm1 28 tdm1xOc3 29 eLicEth4x1GEA 30 chassis1U2U 31 capacityBooster 32 pwe3-1xSTM1 33 pdc48v2uSingleFeed 34 pdc48v1uSingleFeed 35 pdc48v1uDualFeed 36 fan2U 37 fan1U 38 test-card 39 pdc24v2uSingleFeed 40 pdc24v1uSingleFeed 41 pdc24v1uDualFeed 42 unknownCard 43 ricE 44 trafficFpga 45 essFpga 46 tressFpga 47 ip20g 48 licXe4opt 49 tccBmc 50 rmcE 51 licStm1oc3rst 52 tccAmc 53 ip20cEband 54 tccA2 55 tccA2mc 56 tccB2	.1.3.6.1.4.1.2281.10.1.5.8.1.2
genEquipUnitShelfSlotConfigLabel Slot label.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.2281.10.1.5.8.1.3
genEquipUnitShelfSlotConfigAdmin Slot admin state.	EnableDisabler/w Type Values: 2 enable 3 disable	.1.3.6.1.4.1.2281.10.1.5.8.1.4
genEquipUnitShelfSlotConfigSlotReset This parameter Allows resetting specific unit according to genEquipUnitShelfManagmentSlot table index.	OffOnr/w Type Values: 0 off 1 on	.1.3.6.1.4.1.2281.10.1.5.8.1.5

TCC configuration table.

genEquipUnitShelfTccConfigEntry row .1.3.6.1.4.1.2281.10.1.5.9.1

This table allows configuration of TCC population parameters.

Indexes

genEquipUnitShelfTccConfigSlotID

Column	Syntax	OID
genEquipUnitShelfTccConfigSlotID This value is the TCC slot number used as an index for this table.	SlotId Type Values: 0 standalone 1 slot1 2 slot2 3 slot3 4 slot4 5 slot5 6 slot6 7 slot7 8 slot8 9 slot9 10 slot10 11 slot11 12 slot12	.1.3.6.1.4.1.2281.10.1.5.9.1.1
genEquipUnitShelfTccConfigExpectedCardType Expected card type in current TCC slot.	InventoryCardTyper/w Type Values: 0 cleared 10 nexusSc 11 nexusScLp 12 nexusDc 13 nexusQc 19 tccR 20 tccA 21 tccB 22 rmcA 23 rmcB 24 rmcNDc 25 nativeTdm16xE1T1 26 pwe3-16xE1T1 27 tdm1xStm1 28 tdm1xOc3 29 eLicEth4x1GEA 30 chassis1U2U 31 capacityBooster 32 pwe3-1xSTM1 33 pdc48v2uSingleFeed 34 pdc48v1uSingleFeed 35 pdc48v1uDualFeed 36 fan2U 37 fan1U 38 test-card 39 pdc24v2uSingleFeed 40 pdc24v1uSingleFeed 41 pdc24v1uDualFeed 42 unknownCard 43 ricE 44 trafficFpga 45 essFpga 46 tressFpga 47 ip20g 48 licXe4opt 49 tccBmc 50 rmcE 51 licStm1oc3rst 52 tccAmc 53 ip20cEband 54 tccA2 55 tccA2mc 56 tccB2	.1.3.6.1.4.1.2281.10.1.5.9.1.2
genEquipUnitShelfTccConfigLabel TCC label.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.2281.10.1.5.9.1.3
genEquipUnitShelfTccConfigAdmin TCC admin state.	EnableDisabler/w Type Values: 2 enable 3 disable	.1.3.6.1.4.1.2281.10.1.5.9.1.4
genEquipUnitShelfTccConfigReset This parameter Allows resetting specific unit according to genEquipUnitShelfManagmentSlot table index.	OffOnr/w Type Values: 0 off 1 on	.1.3.6.1.4.1.2281.10.1.5.9.1.5

This table contains information about the status of the cards currently inserted in the system.

genEquipUnitShelfSlotStatusEntry row .1.3.6.1.4.1.2281.10.1.5.10.1

This table entry contains information about the status of the cards currently inserted in the system.

Indexes

genEquipUnitShelfSlotStatusSlotID

Column	Syntax	OID
genEquipUnitShelfSlotStatusSlotID Slot where PW-LIC is inserted.	SlotId Type Values: 0 standalone 1 slot1 2 slot2 3 slot3 4 slot4 5 slot5 6 slot6 7 slot7 8 slot8 9 slot9 10 slot10 11 slot11 12 slot12	.1.3.6.1.4.1.2281.10.1.5.10.1.1
genEquipUnitShelfSlotStatusOccupancy Slot Occupancy.	CardOccupancy Type Values: 1 empty 2 equipped 3 not-operational	.1.3.6.1.4.1.2281.10.1.5.10.1.2
genEquipUnitShelfSlotStatusAllowedCardTypes shelf slot allowed card types.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2281.10.1.5.10.1.3
genEquipUnitShelfSlotStatusCardType Shelf Slot card type.	InventoryCardType Type Values: 0 cleared 10 nexusSc 11 nexusScLp 12 nexusDc 13 nexusQc 19 tccR 20 tccA 21 tccB 22 rmcA 23 rmcB 24 rmcNDc 25 nativeTdm16xE1T1 26 pwe3-16xE1T1 27 tdm1xStm1 28 tdm1xOc3 29 eLicEth4x1GEA 30 chassis1U2U 31 capacityBooster 32 pwe3-1xSTM1 33 pdc48v2uSingleFeed 34 pdc48v1uSingleFeed 35 pdc48v1uDualFeed 36 fan2U 37 fan1U 38 test-card 39 pdc24v2uSingleFeed 40 pdc24v1uSingleFeed 41 pdc24v1uDualFeed 42 unknownCard 43 ricE 44 trafficFpga 45 essFpga 46 tressFpga 47 ip20g 48 licXe4opt 49 tccBmc 50 rmcE 51 licStm1oc3rst 52 tccAmc 53 ip20cEband 54 tccA2 55 tccA2mc 56 tccB2	.1.3.6.1.4.1.2281.10.1.5.10.1.4
genEquipUnitShelfSlotStatusOperationalState Operational State.	OperState Type Values: 1 down 2 init 3 loading 4 loaded 5 up 6 up-with-alarms	.1.3.6.1.4.1.2281.10.1.5.10.1.5
genEquipUnitShelfSlotStatusCommunication Slot Operational State.	DownUp Type Values: 0 down 1 up	.1.3.6.1.4.1.2281.10.1.5.10.1.6

This table contains information about the status of the TCC currently inserted in the system.

genEquipUnitShelfTccStatusEntry row .1.3.6.1.4.1.2281.10.1.5.11.1

This table entry contains information about the status of the TCC currently inserted in the system.

Indexes

genEquipUnitShelfTccStatusSlotID

Column	Syntax	OID
genEquipUnitShelfTccStatusSlotID Slot where PW-LIC is inserted.	SlotId Type Values: 0 standalone 1 slot1 2 slot2 3 slot3 4 slot4 5 slot5 6 slot6 7 slot7 8 slot8 9 slot9 10 slot10 11 slot11 12 slot12	.1.3.6.1.4.1.2281.10.1.5.11.1.1
genEquipUnitShelfTccStatusOccupancy Slot Occupancy.	CardOccupancy Type Values: 1 empty 2 equipped 3 not-operational	.1.3.6.1.4.1.2281.10.1.5.11.1.2
genEquipUnitShelfTccStatusAllowedCardTypes shelf slot allowed card types.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2281.10.1.5.11.1.3
genEquipUnitShelfTccStatusCardType Shelf Slot card type.	InventoryCardType Type Values: 0 cleared 10 nexusSc 11 nexusScLp 12 nexusDc 13 nexusQc 19 tccR 20 tccA 21 tccB 22 rmcA 23 rmcB 24 rmcNDc 25 nativeTdm16xE1T1 26 pwe3-16xE1T1 27 tdm1xStm1 28 tdm1xOc3 29 eLicEth4x1GEA 30 chassis1U2U 31 capacityBooster 32 pwe3-1xSTM1 33 pdc48v2uSingleFeed 34 pdc48v1uSingleFeed 35 pdc48v1uDualFeed 36 fan2U 37 fan1U 38 test-card 39 pdc24v2uSingleFeed 40 pdc24v1uSingleFeed 41 pdc24v1uDualFeed 42 unknownCard 43 ricE 44 trafficFpga 45 essFpga 46 tressFpga 47 ip20g 48 licXe4opt 49 tccBmc 50 rmcE 51 licStm1oc3rst 52 tccAmc 53 ip20cEband 54 tccA2 55 tccA2mc 56 tccB2	.1.3.6.1.4.1.2281.10.1.5.11.1.4
genEquipUnitShelfTccStatusOperationalState Operational State.	OperState Type Values: 1 down 2 init 3 loading 4 loaded 5 up 6 up-with-alarms	.1.3.6.1.4.1.2281.10.1.5.11.1.5
genEquipUnitShelfTccStatusCommunication Slot Operational State.	DownUp Type Values: 0 down 1 up	.1.3.6.1.4.1.2281.10.1.5.11.1.6

This table indicates the number of current raised alarms per slot.

genEquipUnitShelfManagmentSeverityEntry row .1.3.6.1.4.1.2281.10.1.5.12.1

This table entry indicates the number of current raised alarms per slot.

Indexes

genEquipUnitShelfManagmentSeveritySlot

Column	Syntax	OID
genEquipUnitShelfManagmentSeveritySlot The slot ID number that identifies it.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.1.5.12.1.1
genEquipUnitShelfManagmentSeverityCritical The number of alarms with 'Critical' severity.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.1.5.12.1.2
genEquipUnitShelfManagmentSeverityMajor The number of alarms with 'Major' severity.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.1.5.12.1.3
genEquipUnitShelfManagmentSeverityMinor The number of alarms with 'Minor' severity.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.1.5.12.1.4
genEquipUnitShelfManagmentSeverityWarning The number of alarms with 'Warning' severity.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.1.5.12.1.5
genEquipUnitShelfManagmentSeverityIndeterminate The number of alarms with 'Indeterminate' severity.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.1.5.12.1.6

This table shows for fun card.

genEquipUnitShelfPdcFanStatusEntry row .1.3.6.1.4.1.2281.10.1.5.13.1

This table shows for fun card.

Indexes

genEquipUnitShelfPdcFanStatusPdcFanId

Column	Syntax	OID
genEquipUnitShelfPdcFanStatusPdcFanId pdc-fan-id	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.1.5.13.1.1
genEquipUnitShelfPdcFanStatusPdcFanExMonitor pdc-fan-existent monitor.	EnableDisabler/w Type Values: 2 enable 3 disable	.1.3.6.1.4.1.2281.10.1.5.13.1.2
genEquipUnitShelfPdcFanStatusPdcFanOccupancy card_occupancy.	CardOccupancy Type Values: 1 empty 2 equipped 3 not-operational	.1.3.6.1.4.1.2281.10.1.5.13.1.3
genEquipUnitShelfPdcFanStatusPdcFanCardType Indicates whether the licensed feature is actually in used or its quantity that currently is in use.	InventoryCardType Type Values: 0 cleared 10 nexusSc 11 nexusScLp 12 nexusDc 13 nexusQc 19 tccR 20 tccA 21 tccB 22 rmcA 23 rmcB 24 rmcNDc 25 nativeTdm16xE1T1 26 pwe3-16xE1T1 27 tdm1xStm1 28 tdm1xOc3 29 eLicEth4x1GEA 30 chassis1U2U 31 capacityBooster 32 pwe3-1xSTM1 33 pdc48v2uSingleFeed 34 pdc48v1uSingleFeed 35 pdc48v1uDualFeed 36 fan2U 37 fan1U 38 test-card 39 pdc24v2uSingleFeed 40 pdc24v1uSingleFeed 41 pdc24v1uDualFeed 42 unknownCard 43 ricE 44 trafficFpga 45 essFpga 46 tressFpga 47 ip20g 48 licXe4opt 49 tccBmc 50 rmcE 51 licStm1oc3rst 52 tccAmc 53 ip20cEband 54 tccA2 55 tccA2mc 56 tccB2	.1.3.6.1.4.1.2281.10.1.5.13.1.4

This table allows enabling/disabling each ABC MUX group.
ABC groups can be defined on top of these MUX.

genEquipUnitShelfAbcMuxEntry row .1.3.6.1.4.1.2281.10.1.5.14.1

This table entry allows enabling/disabling each ABC MUX group.
ABC groups can be defined on top of these MUX.

Indexes

genEquipUnitShelfAbcMuxNumber

Column	Syntax	OID
genEquipUnitShelfAbcMuxNumber Identifier for each of the possible MUXs which choose between using the ABC trunks or the port for multi-directional radios	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.1.5.14.1.1
genEquipUnitShelfAbcMuxAdmin Enables the MUX (for ABC) or disables it (for multi-directional radios).	EnableDisabler/w Type Values: 2 enable 3 disable	.1.3.6.1.4.1.2281.10.1.5.14.1.2

This table includes the current alarm (when a RAISED trap is
sent, an alarm is added to the table, when a CLEAR trap is sent,
the alarm is removed).

genEquipCurrentAlarmEntry row .1.3.6.1.4.1.2281.10.3.1.2.1

Entry containing the info of current RAISED traps.

Indexes

genEquipCurrentAlarmCounter

Column	Syntax	OID
genEquipCurrentAlarmCounter A running counter of open alarms, incremented upon each new alarm.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.3.1.2.1.1
genEquipCurrentAlarmRaisedTimeT The rasied time of this alarm. Time in seconds since January 1, 1970 00:00 UTC.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.3.1.2.1.2
genEquipCurrentAlarmId Alarm ID. List of alarm IDs is available in the MIB Ref. Guide.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.3.1.2.1.3
genEquipCurrentAlarmName Alarm name (the parameter and entity in the CLI) for example 'radio/framer/radio-lof'	RFC1213-MIBDisplayString	.1.3.6.1.4.1.2281.10.3.1.2.1.4
genEquipCurrentAlarmInstance In the case of alarms that may have several appereances (at interfaces, channels, VCs, etc.), this parameter indicates the instance of the alarm.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.3.1.2.1.5
genEquipCurrentAlarmSeverity The current Alarm severity the values can be: - indeterminate(0) - critical(1) - major(2) - minor(3) - warning(4) - cleared(5)	Severity Type Values: 0 indeterminate 1 critical 2 major 3 minor 4 warning 5 cleared	.1.3.6.1.4.1.2281.10.3.1.2.1.6
genEquipCurrentAlarmIfIndex Interface Index where the alarm occurred, alarms that are not associated with specific interfaces will have the following value: For a non-interface alarm, the value is: 65001	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.3.1.2.1.7
genEquipCurrentAlarmModule The module of the alarm. Possible values are 'IDU' or 'RFU'.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.2281.10.3.1.2.1.8
genEquipCurrentAlarmDesc The alarm description (same as the description in the sent trap).	RFC1213-MIBDisplayString	.1.3.6.1.4.1.2281.10.3.1.2.1.9
genEquipCurrentAlarmProbableCause The alarm probable cause.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.2281.10.3.1.2.1.10
genEquipCurrentAlarmCorrectiveActions The alarm corrective actions.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.2281.10.3.1.2.1.11
genEquipCurrentAlarmState The state of the alarm (cleared or rasied).	Enumeration Enumerated Values: 0 cleared 1 raised 2 event	.1.3.6.1.4.1.2281.10.3.1.2.1.12
genEquipCurrentAlarmSlotId The ID of the slot originating the alarm.	SlotId Type Values: 0 standalone 1 slot1 2 slot2 3 slot3 4 slot4 5 slot5 6 slot6 7 slot7 8 slot8 9 slot9 10 slot10 11 slot11 12 slot12	.1.3.6.1.4.1.2281.10.3.1.2.1.13
genEquipCurrentAlarmAdditionalInfo Additional information that may further qualify the source of the alarm.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.2281.10.3.1.2.1.14
genEquipCurrentAlarmUserText An additional description of the event or fault, or any other information that user wants to attach to it.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.2281.10.3.1.2.1.15

This table allows system alarms configuration.

genEquipAlarmConfigEntry row .1.3.6.1.4.1.2281.10.3.1.5.1

This table entry allows system alarms configuration.

Indexes

genEquipAlarmConfigId

Column	Syntax	OID
genEquipAlarmConfigId he alarm unique Id number that identifies it.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.3.1.5.1.1
genEquipAlarmConfigSeverity The perceived severity of the raised alarm.	Severityr/w Type Values: 0 indeterminate 1 critical 2 major 3 minor 4 warning 5 cleared	.1.3.6.1.4.1.2281.10.3.1.5.1.2
genEquipAlarmConfigDescr The description of the raised alarm.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.2281.10.3.1.5.1.3
genEquipAlarmConfigAdditionalText An additional description of the fault, or any other information that user wants to attach to it.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.2281.10.3.1.5.1.4
genEquipAlarmServiceAffect Indicates whether the raised alarm affects a service.	OffOnr/w Type Values: 0 off 1 on	.1.3.6.1.4.1.2281.10.3.1.5.1.5

This table indicates the Trap manager list.

genEquipTrapCfgMgrEntry row .1.3.6.1.4.1.2281.10.3.2.1.1

Entry containing the manager IP addresses and the trap filter options.

Indexes

genEquipTrapCfgMgrId

Column	Syntax	OID
genEquipTrapCfgMgrId This value indicates an index of a specific manager	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.3.2.1.1.1
genEquipTrapCfgMgrAdmin This value indicates an administrative state of a specific manager. disable - will not send traps to this trap manager.	EnableDisabler/w Type Values: 2 enable 3 disable	.1.3.6.1.4.1.2281.10.3.2.1.1.2
genEquipTrapCfgMgrIP This value indicates the manager's IP address.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2281.10.3.2.1.1.3
genEquipTrapCfgMgrPort The Port for sending the trap for each manager (possible values: 70-65535)	Integer32r/w Constraints: range: 70-65535	.1.3.6.1.4.1.2281.10.3.2.1.1.4
genEquipTrapCfgMgrName The name of the manager configured to receive the traps	OctetStringr/w Constraints: range: 0-30	.1.3.6.1.4.1.2281.10.3.2.1.1.5
genEquipTrapCfgMgrCommunity The manager trap community configured.	OctetStringr/w Constraints: range: 0-30	.1.3.6.1.4.1.2281.10.3.2.1.1.6
genEquipTrapCfgMgrSeverityFilter This is a bit mask value for masking traps according to its severity. There is a bit for each severity. If the relevant bit is on (1), the Agent will send traps with this severity. It won't send traps if the bit is off …	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.3.2.1.1.7
genEquipTrapCfgMgrStatusChangeFilter This value represents the mode in which the traps are sent: If the filter is set to ON - only traps that change the severity of the system are sent. If the filter is set to OFF - all traps (that are not screened by othe…	OffOnr/w Type Values: 0 off 1 on	.1.3.6.1.4.1.2281.10.3.2.1.1.8
genEquipTrapCfgMgrCLLI Common Language Location Identifier (maximum length: 100 chars)	OctetStringr/w Constraints: range: 0-100	.1.3.6.1.4.1.2281.10.3.2.1.1.9
genEquipTrapCfgMgrHeartbeatPeriod This item defines the interval (in minutes) between each heartbeat trap. A value of '0' disables this feature.	Integer32r/w Constraints: range: 0-1440	.1.3.6.1.4.1.2281.10.3.2.1.1.10
genEquipTrapCfgMgrIPv6 The IP-v6 address of the trap manage)	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.2281.10.3.2.1.1.11
genEquipTrapCfgMgrV3User The manager trap V3 user name configured	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.2281.10.3.2.1.1.12

This table includes the event log.

genEquipEventLogEntry row .1.3.6.1.4.1.2281.10.3.3.1.1

Entry containing the info of the event log table.

Indexes

genEquipEventLogCounter

Column	Syntax	OID
genEquipEventLogCounter The event counter.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.3.3.1.1.1
genEquipEventLogRaisedTimeT The rasied time of this event. Time in seconds since January 1, 1970 00:00 UTC. (time_t format)	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.3.3.1.1.2
genEquipEventLogSeverity The event severity, possible values are: - indeterminate(0), - critical(1) - major(2) - minor(3) - warning(4) - cleared(5)	Severity Type Values: 0 indeterminate 1 critical 2 major 3 minor 4 warning 5 cleared	.1.3.6.1.4.1.2281.10.3.3.1.1.3
genEquipEventLogModule The module of the event. ('IDU' or 'RFU')	RFC1213-MIBDisplayString	.1.3.6.1.4.1.2281.10.3.3.1.1.4
genEquipEventLogDesc The event description (same as the description in the sent trap).	RFC1213-MIBDisplayString	.1.3.6.1.4.1.2281.10.3.3.1.1.5
genEquipEventLogState The state of the event or alarm. In case of alarm, 'cleard' or 'raised'. In case of event, 'event'.	Enumeration Enumerated Values: 0 cleared 1 raised 2 event	.1.3.6.1.4.1.2281.10.3.3.1.1.6
genEquipEventLogProbableCause The probable cause that may be the reason for the event.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.2281.10.3.3.1.1.7
genEquipEventLogCorrectiveActions Some possible suggested corrective actions in order to eliminate the raised alarm.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.2281.10.3.3.1.1.8
genEquipEventLogAdditionalInfo Additional information that may further qualify the source of the event.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.2281.10.3.3.1.1.9
genEquipEventLogUserText An additional description of the event or fault, or any other information that user wants to attach to it.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.2281.10.3.3.1.1.10
genEquipEventLogIfIndex If Index of the originated source.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.3.3.1.1.11
genEquipEventLogId The Id of the event.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.3.3.1.1.12

This table contains all IDU running versions.

genEquipMngSwIDUVersionsEntry row .1.3.6.1.4.1.2281.10.4.1.13.1.1

Entry containing the info of the IDU Versions table.

Indexes

genEquipMngSwIDUVersionsCounter

Column	Syntax	OID
genEquipMngSwIDUVersionsCounter This is the index of this table.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.4.1.13.1.1.1
genEquipMngSwIDUVersionsPackageName The package name	RFC1213-MIBDisplayString	.1.3.6.1.4.1.2281.10.4.1.13.1.1.2
genEquipMngSwIDUVersionsTargetDevice The Target device within the NE (i.e. Modem, FPGA, IDU)	RFC1213-MIBDisplayString	.1.3.6.1.4.1.2281.10.4.1.13.1.1.3
genEquipMngSwIDUVersionsRunningVersion The running version.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.2281.10.4.1.13.1.1.4
genEquipMngSwIDUVersionsInstalledVersion The installed version is similar to the running version, besides packages that are not currently running. Those packages will have in the running version 'N/A' while in the installed version there is a version number. F…	RFC1213-MIBDisplayString	.1.3.6.1.4.1.2281.10.4.1.13.1.1.5
genEquipMngSwIDUVersionsUpgradePackage In case the user performs an upgrade, this version will be the running/installed version	RFC1213-MIBDisplayString	.1.3.6.1.4.1.2281.10.4.1.13.1.1.6
genEquipMngSwIDUVersionsDowngradePackage In case the user performs downgrade, this version will be the running/installed version.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.2281.10.4.1.13.1.1.7
genEquipMngSwIDUVersionsResetType Minimum level of reset required to update the software in the relevant module.	Enumeration Enumerated Values: 0 noReset 1 appWarmReset 2 tccColdReset 3 mainBoardColdReset 4 mainBoardWarmReset 5 applicationRestart 6 cardReset 7 notApplicable	.1.3.6.1.4.1.2281.10.4.1.13.1.1.8

This table contains all IDU running versions.

genEquipMngSwTimerEntry row .1.3.6.1.4.1.2281.10.4.1.13.2.1

Entry containing the info of the IDU Versions table.

Indexes

genEquipMngSwTimerSlotNumber

Column	Syntax	OID
genEquipMngSwTimerSlotNumber The slot ID of the unit for this timer; 0 is for stand-alone units.	Integer32 Constraints: range: 1-6	.1.3.6.1.4.1.2281.10.4.1.13.2.1.1
genEquipMngSwTimerInstallationTimer The timer (in minutes) for software installation operations to this unit.	Integer32r/w Constraints: range: 1-1440	.1.3.6.1.4.1.2281.10.4.1.13.2.1.2
genEquipMngSwTimerTimeToInstall The amount of time (in seconds) from now for the unit to perform software installation. Zero denotes that no operation has been requested.	Integer32 Constraints: range: 1-86400	.1.3.6.1.4.1.2281.10.4.1.13.2.1.3
genEquipMngSwTimerTimerAbort This parameter is used to stop the count-down to the software update action.	Enumerationr/w Enumerated Values: 0 proceed 1 abort	.1.3.6.1.4.1.2281.10.4.1.13.2.1.4

This table allows configuring the details of the external server where software versions should be located.

genEquipMngSwFileTransferEntry row .1.3.6.1.4.1.2281.10.4.1.18.1

Entry containing the info of software management file transfer.

Indexes

genEquipMngSwFileTransferIndex

Column	Syntax	OID
genEquipMngSwFileTransferIndex The index of the table.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.4.1.18.1.1
genEquipMngSwFileTransferProtocol The protocol to use to transfer the files between the system and an external computer.	FtpProtocolTyper/w Type Values: 0 ftp 1 sftp	.1.3.6.1.4.1.2281.10.4.1.18.1.2
genEquipMngSwFileTransferUserName User name for access to the configuration files location.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.2281.10.4.1.18.1.3
genEquipMngSwFileTransferPassword Password for access to the software version files location.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.2281.10.4.1.18.1.4
genEquipMngSwFileTransferAddress IP address of the computer where software version files are to be taken from.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2281.10.4.1.18.1.5
genEquipMngSwFileTransferPath Location of the files in the external server.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.2281.10.4.1.18.1.6
genEquipMngSwFileTransferIpv6Address IPv6 Server Address.	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.2281.10.4.1.18.1.7

This table shows the status of the current software version file transfer operation.

genEquipMngSwFileTransferStatusEntry row .1.3.6.1.4.1.2281.10.4.1.19.1

Entry containing the info of software management file transfer status.

Indexes

genEquipMngSwFileTransferStatusIndex

Column	Syntax	OID
genEquipMngSwFileTransferStatusIndex The index of the table..	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.4.1.19.1.1
genEquipMngSwFileTransferStatusResult Status of the current file transfer operation.	Enumeration Enumerated Values: 0 ready 1 downloadStarted 2 verifyingDownloadFiles 3 downloadInProgress 4 downloadSuccess 5 downloadFailure 6 allComponentsExist 7 versionIncompatibleWithSystem 8 incompleteFileSet 9 componentUnsupportedByHw 10 corruptSwFiles 11 missingDependencies 12 downloadCancelled	.1.3.6.1.4.1.2281.10.4.1.19.1.2
genEquipMngSwFileTransferPercentageDone An indication of the progress of the process of the current file transfer operation.	Integer32 Constraints: range: 0-100	.1.3.6.1.4.1.2281.10.4.1.19.1.3
genEquipMngSwFileTransferPercentageDoneStandBy An indication of the progress of the process of the current internal file transfer operation.	Integer32 Constraints: range: 0-100	.1.3.6.1.4.1.2281.10.4.1.19.1.4
genEquipMngSwFileTransferStatusResultStandBy Status of the current internal file transfer operation.	Enumeration Enumerated Values: 0 ready 1 download-started 2 verifying-download-files	.1.3.6.1.4.1.2281.10.4.1.19.1.5

This table shows the status of the current software version installation operation.

genEquipMngSwInstallStatusEntry row .1.3.6.1.4.1.2281.10.4.1.20.1

Entry containing the info of software installation status.

Indexes

genEquipMngSwInstallStatusIndex

Column	Syntax	OID
genEquipMngSwInstallStatusIndex The index of the table..	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.4.1.20.1.1
genEquipMngSwInstallStatusResult Status of the current installation operation.	Enumeration Enumerated Values: 0 ready 1 installationStarted 2 verifyingInstallationFiles 3 installationInProgress 4 installationSuccess 5 installationPartialSuccess 6 installationFailure 7 incompleteSwVersion 8 installationCancelled	.1.3.6.1.4.1.2281.10.4.1.20.1.2
genEquipMngSwInstallPercentageDone An indication of the progress of the process of the current installation operation.	Integer32 Constraints: range: 0-100	.1.3.6.1.4.1.2281.10.4.1.20.1.3
genEquipMngSwInstallStatusResultStandBy Status of the current file transfer operation.	Enumeration Enumerated Values: 0 ready 1 installationStarted 2 verifyingInstallationFiles 3 installationInProgress 4 installationSuccess 5 installationPartialSuccess 6 installationFailure 7 incompleteSwVersion 8 installationCancelled	.1.3.6.1.4.1.2281.10.4.1.20.1.4
genEquipMngSwInstallPercentageDoneStandBy An indication of the progress of the process of the current installation operation.	Integer32 Constraints: range: 0-100	.1.3.6.1.4.1.2281.10.4.1.20.1.5

This table allows downloading and installing SW versions.

genEquipMngSwOperationEntry row .1.3.6.1.4.1.2281.10.4.1.21.1

Entry containing the info of software management operation table.

Indexes

genEquipMngSwOperationIndex

Column	Syntax	OID
genEquipMngSwOperationIndex The index of the table..	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.4.1.21.1.1
genEquipMngSwOperationOperation The operation to be performed: download, install, update backup, swap boot section, abort installation timer.	Enumerationr/w Enumerated Values: 0 noAction 1 download 2 install 3 updateBackup 4 swapBootSection 5 abortTimer	.1.3.6.1.4.1.2281.10.4.1.21.1.2
genEquipMngSwOperationTimedInstallation Whether to perform the installation after a configurable timer expires.	NoYesr/w Type Values: 0 no 1 yes	.1.3.6.1.4.1.2281.10.4.1.21.1.3

This table shows the versions currently running in cards installed in the system.

genEquipMngSwSlotRunningVersionEntry row .1.3.6.1.4.1.2281.10.4.1.22.1

This table entry shows the versions currently running in cards installed in the system.

Indexes

genEquipMngSwSlotRunningVersionSlotId

Column	Syntax	OID
genEquipMngSwSlotRunningVersionSlotId The index of the table..	Integer32 Constraints: range: 1-12	.1.3.6.1.4.1.2281.10.4.1.22.1.1
genEquipMngSwSlotRunningVersionCardType Type of card inserted in slot.	InventoryCardType Type Values: 0 cleared 10 nexusSc 11 nexusScLp 12 nexusDc 13 nexusQc 19 tccR 20 tccA 21 tccB 22 rmcA 23 rmcB 24 rmcNDc 25 nativeTdm16xE1T1 26 pwe3-16xE1T1 27 tdm1xStm1 28 tdm1xOc3 29 eLicEth4x1GEA 30 chassis1U2U 31 capacityBooster 32 pwe3-1xSTM1 33 pdc48v2uSingleFeed 34 pdc48v1uSingleFeed 35 pdc48v1uDualFeed 36 fan2U 37 fan1U 38 test-card 39 pdc24v2uSingleFeed 40 pdc24v1uSingleFeed 41 pdc24v1uDualFeed 42 unknownCard 43 ricE 44 trafficFpga 45 essFpga 46 tressFpga 47 ip20g 48 licXe4opt 49 tccBmc 50 rmcE 51 licStm1oc3rst 52 tccAmc 53 ip20cEband 54 tccA2 55 tccA2mc 56 tccB2	.1.3.6.1.4.1.2281.10.4.1.22.1.2
genEquipMngSwSlotRunningVersionComponent Name of SW functional component.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.2281.10.4.1.22.1.3
genEquipMngSwSlotRunningVersionActualVersion Version of running SW.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.2281.10.4.1.22.1.4

This table shows the software versions residing in the standby unit.

genEquipMngSwIDUVersionsStandByEntry row .1.3.6.1.4.1.2281.10.4.1.23.1

This table entry shows the software versions residing in the standby unit.

Indexes

genEquipMngSwIDUVersionsStandByIndex

Column	Syntax	OID
genEquipMngSwIDUVersionsStandByIndex mate rpm index.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.4.1.23.1.1
genEquipMngSwIDUVersionsStandByPackageName Name of the module which the software package belongs to.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.2281.10.4.1.23.1.2
genEquipMngSwIDUVersionsStandByRunningVersion Version currently running.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.2281.10.4.1.23.1.3
genEquipMngSwIDUVersionsStandByInstalledVersion Currently installed version; upon the appropriate reset this will become the running version.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.2281.10.4.1.23.1.4
genEquipMngSwIDUVersionsStandByTargetDevice The HW board in which the SW module from the mate is running.	InventoryCardType Type Values: 0 cleared 10 nexusSc 11 nexusScLp 12 nexusDc 13 nexusQc 19 tccR 20 tccA 21 tccB 22 rmcA 23 rmcB 24 rmcNDc 25 nativeTdm16xE1T1 26 pwe3-16xE1T1 27 tdm1xStm1 28 tdm1xOc3 29 eLicEth4x1GEA 30 chassis1U2U 31 capacityBooster 32 pwe3-1xSTM1 33 pdc48v2uSingleFeed 34 pdc48v1uSingleFeed 35 pdc48v1uDualFeed 36 fan2U 37 fan1U 38 test-card 39 pdc24v2uSingleFeed 40 pdc24v1uSingleFeed 41 pdc24v1uDualFeed 42 unknownCard 43 ricE 44 trafficFpga 45 essFpga 46 tressFpga 47 ip20g 48 licXe4opt 49 tccBmc 50 rmcE 51 licStm1oc3rst 52 tccAmc 53 ip20cEband 54 tccA2 55 tccA2mc 56 tccB2	.1.3.6.1.4.1.2281.10.4.1.23.1.5
genEquipMngSwIDUVersionsStandByDownloadedPackage Version that was downloaded from server upon installation, it will become the installed version.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.2281.10.4.1.23.1.6
genEquipMngSwIDUVersionsStandByResetType Minimum level of reset required to update the software in the relevant module.	VmResetType Type Values: 0 no-reset 1 main-board-warm-reset 2 tcc-cold-reset 3 main-board-cold-reset 4 card-warm-reset 5 card-cold-reset 6 not-applicable-reset	.1.3.6.1.4.1.2281.10.4.1.23.1.7

This table allows configuring the details of the external server where configuration should be located.

genEquipMngCfgFileTransferEntry row .1.3.6.1.4.1.2281.10.4.2.11.1

This table entry allows configuring the details of the external server where configuration should be located.

Indexes

genEquipMngCfgFileTransferIndex

Column	Syntax	OID
genEquipMngCfgFileTransferIndex Index of the table.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.4.2.11.1.1
genEquipMngCfgFileTransferProtocol The protocol to use to transfer the files between the system and an external computer.	FtpProtocolTyper/w Type Values: 0 ftp 1 sftp	.1.3.6.1.4.1.2281.10.4.2.11.1.2
genEquipMngCfgFileTransferUserName User name for access to the configuration files location.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.2281.10.4.2.11.1.3
genEquipMngCfgFileTransferPassword Password for access to the configuration files location.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.2281.10.4.2.11.1.4
genEquipMngCfgFileTransferAddress IP address of the computer where configuration files are to be transferred to/from.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2281.10.4.2.11.1.5
genEquipMngCfgFileTransferPath Location of the files in the external server.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.2281.10.4.2.11.1.6
genEquipMngCfgFileTransferFileName Name of the file in server.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.2281.10.4.2.11.1.7
genEquipMngCfgFileTransferIpv6Address IPv6 Server's address where files will be transferred to/from.	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.2281.10.4.2.11.1.8

This table shows the status of the current configuration file transfer operation.

genEquipMngCfgFileTransferStatusEntry row .1.3.6.1.4.1.2281.10.4.2.12.1

This table entry shows the status of the current configuration file transfer operation.

Indexes

genEquipMngCfgFileTransferStatusIndex

Column	Syntax	OID
genEquipMngCfgFileTransferStatusIndex Index of the table.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.4.2.12.1.1
genEquipMngCfgFileTransferStatusPercentageDone An indication of the progress of the process of the current file transfer operation.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.4.2.12.1.2
genEquipMngCfgFileTransferStatusResult Status of the current file transfer operation.	FileTransferStatusr/w Type Values: 0 ready 1 inTransfer 2 failure 3 success	.1.3.6.1.4.1.2281.10.4.2.12.1.3

This table allows creating, restoring, transferring and deleting configuration files.

genEquipMngCfgOperationEntry row .1.3.6.1.4.1.2281.10.4.2.13.1

This table entry allows creating, restoring, transferring and deleting configuration files.

Indexes

genEquipMngCfgOperationIndex

Column	Syntax	OID
genEquipMngCfgOperationIndex Index of the table.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.4.2.13.1.1
genEquipMngCfgOperationOperation The operation to be performed: backup, restore, delete, import, export.	CfgOperr/w Type Values: 0 invalid-operation 1 backup 2 restore 3 delete 4 import 5 export	.1.3.6.1.4.1.2281.10.4.2.13.1.2
genEquipMngCfgOperationFileNumber A number from 1 to 3 to identify different restoration files.	Integer32r/w Constraints: range: 1-3	.1.3.6.1.4.1.2281.10.4.2.13.1.3
genEquipMngCfgOperationTimedInstallation Whether to install immediately or following a countdown from a defined counter.	NoYesr/w Type Values: 0 no 1 yes	.1.3.6.1.4.1.2281.10.4.2.13.1.4
genEquipMngCfgOperationTimer A timer which determines the time to installation.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.2281.10.4.2.13.1.5
genEquipMngCfgOperationSlotNumber Slot number.	Integer32 Constraints: range: 0-12	.1.3.6.1.4.1.2281.10.4.2.13.1.6

This table shows the status of the current configuration management operation.

genEquipMngCfgConfigurationFilesEntry row .1.3.6.1.4.1.2281.10.4.2.14.1

This table entry shows the status of the current configuration file transfer operation.

Indexes

genEquipMngCfgConfigurationFilesIndex

Column	Syntax	OID
genEquipMngCfgConfigurationFilesIndex Index of the table.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.4.2.14.1.1
genEquipMngCfgConfigurationFilesFileNumber A number from 1 to 3 to identify different restoration files.	Integer32 Constraints: range: 1-3	.1.3.6.1.4.1.2281.10.4.2.14.1.2
genEquipMngCfgConfigurationFilesSystemType Type of product from which the backup file was created.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.2281.10.4.2.14.1.3
genEquipMngCfgConfigurationFilesSWVersion Software version of the system from which the backup file was created.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.2281.10.4.2.14.1.4
genEquipMngCfgConfigurationFilesTimeDate Time and date of creation of the file.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.4.2.14.1.5
genEquipMngCfgConfigurationFilesSystemIP IP address of the unit from which the backup file was created.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2281.10.4.2.14.1.6
genEquipMngCfgConfigurationFilesCardsConfigured Types of cards for which configuration values exist in the file; when restoring other card types will get default values.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.2281.10.4.2.14.1.7
genEquipMngCfgConfigurationFilesSystemID System ID of the unit from which the backup file was created.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.2281.10.4.2.14.1.8

This table allows configuring the details of the external server which the unit info file will be expoted to.

genEquipMngUnitInfoFileTransferEntry row .1.3.6.1.4.1.2281.10.4.4.2.1

This table entry allows configuring the details of the external server which the unit info file will be expoted to.

Indexes

genEquipMngUnitInfoFileTransferIndex

Column	Syntax	OID
genEquipMngUnitInfoFileTransferIndex Index of the table.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.4.4.2.1.1
genEquipMngUnitInfoFileTransferProtocol The protocol to use to transfer the files between the system and an external computer.	FtpProtocolTyper/w Type Values: 0 ftp 1 sftp	.1.3.6.1.4.1.2281.10.4.4.2.1.2
genEquipMngUnitInfoFileTransferUserName User name for access to the files location.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.2281.10.4.4.2.1.3
genEquipMngUnitInfoFileTransferPassword Password for access to the files location.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.2281.10.4.4.2.1.4
genEquipMngUnitInfoFileTransferAddress IP address of the computer where the files are to be transferred to/from.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2281.10.4.4.2.1.5
genEquipMngUnitInfoFileTransferPath Desired location of the unit info file in external server.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.2281.10.4.4.2.1.6
genEquipMngUnitInfoFileTransferFileName Name of the file in server.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.2281.10.4.4.2.1.7
genEquipMngUnitInfoFileTransferIpv6Address IPv6 Server's Address to which he file will be transferred.	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.2281.10.4.4.2.1.8

This table shows the status of the current configuration file transfer operation.

genEquipMngUnitInfoFileTransferStatusEntry row .1.3.6.1.4.1.2281.10.4.4.3.1

This table entry shows the status of the current configuration file transfer operation.

Indexes

genEquipMngUnitInfoFileTransferStatusIndex

Column	Syntax	OID
genEquipMngUnitInfoFileTransferStatusIndex Index of the table.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.4.4.3.1.1
genEquipMngUnitInfoFileTransferStatusPercentageDone An indication of the progress of the process of the current file transfer operation.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.4.4.3.1.2
genEquipMngUnitInfoFileTransferStatusResult Status of the current file transfer operation.	ProgressStatusr/w Type Values: 0 ready 1 inProgress 2 success 3 failure	.1.3.6.1.4.1.2281.10.4.4.3.1.3

User table.

genEquipSecurityUsersEntry row .1.3.6.1.4.1.2281.10.11.2.1.1

User table.

Indexes

genEquipSecurityUsersName

Column	Syntax	OID
genEquipSecurityUsersName This value is the user name.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.2281.10.11.2.1.1.1
genEquipSecurityUsersPasswd This value is the user's password. It is used only in the creation phase. To change the password, you need to use the genEquipSecurityUsersAndGroupsChangePasswd command	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.2281.10.11.2.1.1.2
genEquipSecurityUsersPriviledge This value is the users privilege.	Enumerationr/w Enumerated Values: -1 no-privilege-lvl 0 viewer-user-lvl 1 operator-user-lvl 2 admin-user-lvl 3 tech-user-lvl	.1.3.6.1.4.1.2281.10.11.2.1.1.3
genEquipSecurityUsersPasswdAging This value is the user's password aging time (in days). When response is 99999 the meaning is No Aging.	Integer32r/w Constraints: range: 0-90	.1.3.6.1.4.1.2281.10.11.2.1.1.4
genEquipSecurityUsersExprDate This value is the user's password expiration date. The value is presented in time_t format. When response is -1 the meaning is Never Expired.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.11.2.1.1.5
genEquipSecurityUsersLastLogin This value is the user last login date. Time in seconds since January 1, 1970 00:00 UTC.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.11.2.1.1.6
genEquipSecurityUsersRowStatus This value is the status of the entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2281.10.11.2.1.1.30

Security General File Transfer Configuration Table.

genEquipSecuritySNMPV3AuthEntry row .1.3.6.1.4.1.2281.10.11.3.10.1.1

Security General File Transfer Configuration Table

Indexes

genEquipSecuritySNMPV3AuthUserName

Column	Syntax	OID
genEquipSecuritySNMPV3AuthUserName This value is the V3 user name and the index of file v3 Authentication table.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.2281.10.11.3.10.1.1.1
genEquipSecuritySNMPV3AuthPassword This value is file V3 user authentication password.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.2281.10.11.3.10.1.1.2
genEquipSecuritySNMPV3AuthSecurityMode This is the user's security mode	Enumerationr/w Enumerated Values: 1 noAuthNoPriv 2 authNoPriv 3 authPriv	.1.3.6.1.4.1.2281.10.11.3.10.1.1.3
genEquipSecuritySNMPV3AuthEncryptionMode This is the V3 encryption mode.	Enumerationr/w Enumerated Values: 1 none 2 des 3 aes	.1.3.6.1.4.1.2281.10.11.3.10.1.1.4
genEquipSecuritySNMPV3AuthAuthenticationAlgorithm This is the V3 authentication algorithm.	Enumerationr/w Enumerated Values: 1 none 2 sha 3 md5	.1.3.6.1.4.1.2281.10.11.3.10.1.1.5
genEquipSecuritySNMPV3AuthAccessMode This is the V3 user access mode.	Enumerationr/w Enumerated Values: 1 readWrite 2 readOnly	.1.3.6.1.4.1.2281.10.11.3.10.1.1.6
genEquipSecuritySNMPV3AuthRowStatus This is the row status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2281.10.11.3.10.1.1.30