MWRM-NETWORK-MIB Table View

This table keeps the information about the neighbour attributes, such as IP address, MAC address, slot,
port number and description. It can be used by the NMS for topology discovery.

genEquipNetworkManagmentIpAddrCfgEntry row .1.3.6.1.4.1.2281.10.2.4.20.1

This table keeps the information about the neighbour attributes, such as IP address, MAC address, slot,
port number and description. It can be used by the NMS for topology discovery.

Indexes

genEquipNetworkManagmentIpAddrCfgMngId

Column	Syntax	OID
genEquipNetworkManagmentIpAddrCfgMngId Management Ifindex.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.2.4.20.1.1
genEquipNetworkManagmentIpAddrCfgIpv4Address This value indicates the local IP address	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2281.10.2.4.20.1.2
genEquipNetworkManagmentIpAddrCfgIpv4SubnetMask This value indicates the local subnet mask. (for example 255.255.255.0)	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2281.10.2.4.20.1.3
genEquipNetworkManagmentIpAddrCfgDefaultGateway This value indicates the local default gateway.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2281.10.2.4.20.1.4
genEquipNetworkManagmentIpAddrCfgIpv6Address This value indicates the Local IPv6. y is a 16-bit hexadecimal field of the form xxxx, where x takes values from 0 to F.	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.2281.10.2.4.20.1.5
genEquipNetworkManagmentIpAddrCfgIpv6PrefixLength IPv6 Prefix-Length specifies the IPv6 subnet.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.2.4.20.1.6
genEquipNetworkManagmentIpAddrCfgDefaultGatewayIPv6 This value indicates the local IPv6 default gateway.	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.2281.10.2.4.20.1.7

This table keeps the information about the neighbour attributes, such as IP address, MAC address, slot,
port number and description. It can be used by the NMS for topology discovery.

genEquipNetworkIPEntry row .1.3.6.1.4.1.2281.10.2.5.1.1

This table keeps the information about the neighbour attributes, such as IP address, MAC address, slot,
port number and description. It can be used by the NMS for topology discovery.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
genEquipNetworkIPEthernetPort Ethernet port (local port) is the index of the table, to be taken from ifIndex.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.2.5.1.1.1
genEquipNetworkIPPeerMacAddr The Peer (far-end) Mac address of the managed NE (CPU) connected on the local Ethernet port	OctetStringr/w	.1.3.6.1.4.1.2281.10.2.5.1.1.2
genEquipNetworkIPPeerIPAddr The Peer (far-end) IP address of the managed NE (CPU) connected on the local Ethernet port	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2281.10.2.5.1.1.3
genEquipNetworkIPPeerSlotID The Peer (far-end) slot-id of the managed NE connected on the local Ethernet port.	Integer32r/w Constraints: range: 0-31	.1.3.6.1.4.1.2281.10.2.5.1.1.4
genEquipNetworkIPPeerPortNumber The Peer (far-end) port number of the managed NE connected on the local Ethernet port. The port number is sequential starting with 1	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2281.10.2.5.1.1.5
genEquipNetworkIPPeerDescr User defined description for the peer port	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.2281.10.2.5.1.1.6
genEquipNetworkIPPeerNodeToNodeConnection Node To Node Connection. This column is relevant only for STM-1/OC-3 connections. if this parameter is enabled, it means that the STM-1/OC-3 port is connected with another microwave-radio NE, the STM-1/OC-3 port is not …	MWRM-UNIT-MIBEnableDisabler/w Type Values: 2 enable 3 disable	.1.3.6.1.4.1.2281.10.2.5.1.1.7

The switch VLAN table.

genEquipEthernetSwitchCfgVIDEntry row .1.3.6.1.4.1.2281.10.8.1.1.2.1

The switch VLAN table.

Indexes

genEquipEthernetSwitchCfgVIDIndex

Column	Syntax	OID
genEquipEthernetSwitchCfgVIDIndex VLAN number, the index of the table.	Integer32r/w Constraints: range: 0-4095	.1.3.6.1.4.1.2281.10.8.1.1.2.1.1
genEquipEthernetSwitchCfgVIDName VLAN name.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.2281.10.8.1.1.2.1.2
genEquipEthernetSwitchCfgVIDState VLAN state.	Enumerationr/w Enumerated Values: 1 suspend 2 active	.1.3.6.1.4.1.2281.10.8.1.1.2.1.3
genEquipEthernetSwitchCfgVIDMemberPorts A string that indicates in which ports this VLAN is allowed. Port numbers are separated by spaces	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.2281.10.8.1.1.2.1.4
genEquipEthernetSwitchCfgVIDEVCID This parameter defines a name for the Ethernet service running over this VLAN. This information is used by the NMS as a service identifier	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.2281.10.8.1.1.2.1.5
genEquipEthernetSwitchCfgVIDEVCDescription This parameter allows adding a description for the Ethernet service running over this VLAN. This information is informational only for users purposes	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.2281.10.8.1.1.2.1.6
genEquipEthernetSwitchCfgVIDRowStatus The raw status of the vlan table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2281.10.8.1.1.2.1.30

RSTP port status table.

genEquipEthernetSwitchXSTPParamsEthernetPortsEntry row .1.3.6.1.4.1.2281.10.8.1.2.2.6.1

RSTP port status table.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
genEquipEthernetSwitchXSTPParamsEthernetPortsState RSTP port state.	Enumeration Enumerated Values: 0 discarding 1 listening 2 learning 3 forwarding 4 blocking	.1.3.6.1.4.1.2281.10.8.1.2.2.6.1.1
genEquipEthernetSwitchXSTPParamsEthernetPortsRole RSTP port role.	Enumeration Enumerated Values: 0 masterport 1 alternate 2 rootport 3 designated 4 disabled 5 backup	.1.3.6.1.4.1.2281.10.8.1.2.2.6.1.2
genEquipEthernetSwitchXSTPParamsEthernetPortsPathCost RSTP configured path cost.	Integer32r/w Constraints: range: 1-200000000	.1.3.6.1.4.1.2281.10.8.1.2.2.6.1.3
genEquipEthernetSwitchXSTPParamsEthernetPortsPriority RSTP configured port priority.	Integer32r/w Constraints: range: 0-240	.1.3.6.1.4.1.2281.10.8.1.2.2.6.1.4
genEquipEthernetSwitchXSTPParamsEthernetDesPathCost RSTP designated path cost. This is the path cost to the root port from this local port.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.2.2.6.1.5
genEquipEthernetSwitchXSTPParamsEthernetEdgePort This parameter indicates if the port is an Edge port or not.	MWRM-UNIT-MIBNoYesr/w Type Values: 0 no 1 yes	.1.3.6.1.4.1.2281.10.8.1.2.2.6.1.6

The switch application, QoS Table.

genEquipEthernetSwitchQoSEntry row .1.3.6.1.4.1.2281.10.8.1.3.1.1

The switch application, QoS Table, per Ethernet port based on ifIndex.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
genEquipEthernetSwitchQoSFirstCrit First classification criteria. This is the first criteria which will be evaluated for incoming frames. queueDecision causes classification by defined static MAC address. pbitOverride causes classification by pbits. queu…	Enumerationr/w Enumerated Values: 0 disable 1 queueDecision 2 pbitOverride 3 queueAndPbitOverride	.1.3.6.1.4.1.2281.10.8.1.3.1.1.1
genEquipEthernetSwitchQoSSecondCrit Second classification criteria. Applicable if match with first criteria is not found. queueDecision causes classification by defined VLAN to queue mapping. pbitOverride causes classification by pbits. queueAndPbitOverri…	Enumerationr/w Enumerated Values: 0 disable 1 queueDecision 2 pbitOverride 3 queueAndPbitOverride	.1.3.6.1.4.1.2281.10.8.1.3.1.1.2
genEquipEthernetSwitchQoSThirdCrit Third classification criteria. Applicable if match with first or second criteria is not found. ipTosPriority causes classification by defined IP TOS to queue mapping only. vlanPbitspriority causes classification by pbit…	Enumerationr/w Enumerated Values: 0 ipTosPriority 1 vlanPbitspriority 2 ipTosOverVlanPbitsPriority 3 vlanPbitsOverIpTosPriority 4 portPriority	.1.3.6.1.4.1.2281.10.8.1.3.1.1.3
genEquipEthernetSwitchQoSDefClassification Default classification for frame that does suit to the previous classifications. Choosing first will classify this frame as the first criteria for example.	Enumerationr/w Enumerated Values: 0 first 1 second 2 third 3 fourth	.1.3.6.1.4.1.2281.10.8.1.3.1.1.4
genEquipEthernetSwitchQoSEgressSched Egress scheduler options.	Enumerationr/w Enumerated Values: 0 allQueuesStrict 1 fourthQueueStrict 2 fourthThirdQueuesStrict 3 allQueuesHrr	.1.3.6.1.4.1.2281.10.8.1.3.1.1.5
genEquipEthernetSwitchQoSEgressShaper Enable/Disable egress shaping.	MWRM-UNIT-MIBOffOnr/w Type Values: 0 off 1 on	.1.3.6.1.4.1.2281.10.8.1.3.1.1.6
genEquipEthernetSwitchQoSEgressShaperRate Egress shaper rate.	Integer32r/w Constraints: range: 64-1000000	.1.3.6.1.4.1.2281.10.8.1.3.1.1.7
genEquipEthernetSwitchQoSIngressPolicer Ingress policer (rate limiting) name assiciated with this port. The policer Name is defined in genEquipEthernetSwitchQoSPolicerNameName (in a table)	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.2281.10.8.1.3.1.1.8

VLAN priority bits remapping table.

genEquipEthernetSwitchVlanPbitRemapEntry row .1.3.6.1.4.1.2281.10.8.1.3.2.1

VLAN priority bits remap table.

Indexes

RFC1213-MIBifIndex genEquipEthernetSwitchVlanPbitRemapPbit

Column	Syntax	OID
genEquipEthernetSwitchVlanPbitRemapPbit The ingress Pbit.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.3.2.1.1
genEquipEthernetSwitchVlanPbitRemapRemappedPbit The remapped Pbit.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.3.2.1.2

VLAN Id to Queue mapping table.

genEquipEthernetSwitchQoSVLANIdToQueueEntry row .1.3.6.1.4.1.2281.10.8.1.3.3.1

VLAN Id to Queue mapping table.

Indexes

genEquipEthernetSwitchCfgVIDIndex

Column	Syntax	OID
genEquipEthernetSwitchQoSVLANIdToQueueQueue Queue for the vlan.	MWRM-UNIT-MIBQueueNamer/w Type Values: 0 first-queue 1 second-queue 2 third-queue 3 fourth-queue 4 none	.1.3.6.1.4.1.2281.10.8.1.3.3.1.1

Mapping of IP pbits to Queue.

genEquipEthernetSwitchQoSIPPbitsEntry row .1.3.6.1.4.1.2281.10.8.1.3.4.2.1

Mapping of IP pbits to Queue.

Indexes

genEquipEthernetSwitchQoSIPPbitsId

Column	Syntax	OID
genEquipEthernetSwitchQoSIPPbitsId The pbit number.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.3.4.2.1.1
genEquipEthernetSwitchQoSIPPbitsQueue the queue for that pbit.	MWRM-UNIT-MIBQueueNamer/w Type Values: 0 first-queue 1 second-queue 2 third-queue 3 fourth-queue 4 none	.1.3.6.1.4.1.2281.10.8.1.3.4.2.1.2

VLAN pbit to queue mapping table.

genEquipEthernetSwitchQoSVLANPbitsEntry row .1.3.6.1.4.1.2281.10.8.1.3.5.1

VLAN pbit to queue mapping table.

Indexes

genEquipEthernetSwitchQoSVLANPbitsId

Column	Syntax	OID
genEquipEthernetSwitchQoSVLANPbitsId The VLAN'S pbit (index of the table)	Integer32 Constraints: range: 1-8	.1.3.6.1.4.1.2281.10.8.1.3.5.1.1
genEquipEthernetSwitchQoSVLANPbitsQueue The mapped queue for the corresponding VLAN .	MWRM-UNIT-MIBQueueNamer/w Type Values: 0 first-queue 1 second-queue 2 third-queue 3 fourth-queue 4 none	.1.3.6.1.4.1.2281.10.8.1.3.5.1.2

Queue weights mapping table.

genEquipEthernetSwitchQoSQueueWeightsEntry row .1.3.6.1.4.1.2281.10.8.1.3.6.1

Queue weights mapping table.

Indexes

genEquipEthernetSwitchQoSQueueWeightsId

Column	Syntax	OID
genEquipEthernetSwitchQoSQueueWeightsId Index for this table.	Integer32 Constraints: range: 1-4	.1.3.6.1.4.1.2281.10.8.1.3.6.1.1
genEquipEthernetSwitchQoSQueueWeightsQueue The queue number.	MWRM-UNIT-MIBQueueName Type Values: 0 first-queue 1 second-queue 2 third-queue 3 fourth-queue 4 none	.1.3.6.1.4.1.2281.10.8.1.3.6.1.2
genEquipEthernetSwitchQoSQueueWeightsWeight The weight for the queue	Integer32r/w Constraints: range: 1-32	.1.3.6.1.4.1.2281.10.8.1.3.6.1.3

Table of configured policers.

genEquipEthernetSwitchQoSPolicerNameEntry row .1.3.6.1.4.1.2281.10.8.1.3.7.1

Table of configured policers.

Indexes

genEquipEthernetSwitchQoSPolicerNameId

Column	Syntax	OID
genEquipEthernetSwitchQoSPolicerNameId Policer ID	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.3.7.1.1
genEquipEthernetSwitchQoSPolicerNameName Policer name.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.2281.10.8.1.3.7.1.2
genEquipEthernetSwitchQoSPolicerNameRowStatus Policer row status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2281.10.8.1.3.7.1.30

The policer class table list.

genEquipEthernetSwitchQoSPolicerListEntry row .1.3.6.1.4.1.2281.10.8.1.3.8.1

The policer class table list.

Indexes

genEquipEthernetSwitchQoSPolicerNameId genEquipEthernetSwitchQoSPolicerListId

Column	Syntax	OID
genEquipEthernetSwitchQoSPolicerListId The policer ID.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.3.8.1.1
genEquipEthernetSwitchQoSPolicerListName The policer class name	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.2281.10.8.1.3.8.1.2
genEquipEthernetSwitchQoSPolicerListClassName The policer class name	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.2281.10.8.1.3.8.1.3
genEquipEthernetSwitchQoSPolicerListTrafficType The traffic type that the policer applies to.	Enumerationr/w Enumerated Values: 1 unknownUcast 2 unknowMulticast 3 broadcast 5 multicast 6 unicast 8 arp 9 tcpData 10 tcpControl 11 udp 12 noTcpUdp 13 firstPriority 14 secondPriority 15 thirdPriority 16 forthPriority 17 allTraffic	.1.3.6.1.4.1.2281.10.8.1.3.8.1.4
genEquipEthernetSwitchQoSPolicerListCIR The CIR (Critical Information Rate) value (in Kbps)	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.3.8.1.5
genEquipEthernetSwitchQoSPolicerListCBS The CBS (Critical Burst Size) value (in Bytes)	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.3.8.1.6
genEquipEthernetSwitchQoSPolicerListRowStatus Row status of the table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2281.10.8.1.3.8.1.30

Static MAC forwarding table.

genEquipEthernetSwitchQoSStaticMacEntry row .1.3.6.1.4.1.2281.10.8.1.3.9.1

Static MAC forwarding table.

Indexes

genEquipEthernetSwitchQoSStaticMacId

Column	Syntax	OID
genEquipEthernetSwitchQoSStaticMacId The index of the table	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.3.9.1.1
genEquipEthernetSwitchQoSStaticMacAddr Static MAC Address.	OctetStringr/w	.1.3.6.1.4.1.2281.10.8.1.3.9.1.2
genEquipEthernetSwitchQoSStaticMacVlanId VLAN ID for this MAC.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.3.9.1.3
genEquipEthernetSwitchQoSStaticMacForwardTo The port number to be forwarded to, starting from 1.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.3.9.1.4
genEquipEthernetSwitchQoSStaticMacPriority The priority to be given to this MAC address.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.3.9.1.5
genEquipEthernetSwitchQoSStaticMacRowStatus The row status of the operation.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2281.10.8.1.3.9.1.30

Table for CoS and color classification by destination MAC address.

genEquipEthernetSwitchEtmClassifierByMacEntry row .1.3.6.1.4.1.2281.10.8.1.5.6.1.2.1

Table for CoS and color classification by destination MAC address.

Indexes

genEquipEthernetSwitchEtmClassifierByMacIndex

Column	Syntax	OID
genEquipEthernetSwitchEtmClassifierByMacIndex The index is pointing to a table entry. Each entry contains different MAC address.	Integer32 Constraints: range: 1-16	.1.3.6.1.4.1.2281.10.8.1.5.6.1.2.1.1
genEquipEthernetSwitchEtmClassifierByMacValue MAC Address value for CoS Classification by MAC Table Entry.	OctetStringr/w Constraints: range: 0-6	.1.3.6.1.4.1.2281.10.8.1.5.6.1.2.1.2
genEquipEthernetSwitchEtmClassifierByMacCos CoS value for CoS Classification by MAC Table Entry.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.2281.10.8.1.5.6.1.2.1.3
genEquipEthernetSwitchEtmClassifierByMacColor Color value for CoS Classification by MAC Table Entry.	MWRM-UNIT-MIBGreenYellowr/w Type Values: 0 green 1 yellow	.1.3.6.1.4.1.2281.10.8.1.5.6.1.2.1.4
genEquipEthernetSwitchEtmClassifierByMacRowStatus Row Status for this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2281.10.8.1.5.6.1.2.1.30

Table for CoS and color classification by UDP ports. Classification may be based on source port,
dest port ,or both - use validity parameter.

genEquipEthernetSwitchEtmClassifierByUdpPortEntry row .1.3.6.1.4.1.2281.10.8.1.5.6.2.2.1

Entry for CoS and color classification by UDP ports. Classification may be based on source port,
dest port ,or both - use validity parameter.

Indexes

genEquipEthernetSwitchEtmClassifierByUdpPortIndex

Column	Syntax	OID
genEquipEthernetSwitchEtmClassifierByUdpPortIndex The index is pointing to a table entry. Each entry contains different UDP source and destination ports.	Integer32 Constraints: range: 1-8	.1.3.6.1.4.1.2281.10.8.1.5.6.2.2.1.1
genEquipEthernetSwitchEtmClassifierByUdpPortSrcPort UDP source port value for CoS Classification by UDP ports Table Entry.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.5.6.2.2.1.2
genEquipEthernetSwitchEtmClassifierByUdpPortDestPort UDP dest. port value for CoS Classification by UDP ports Table Entry.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.5.6.2.2.1.3
genEquipEthernetSwitchEtmClassifierByUdpPortCos CoS value for CoS Classification by UDP Ports Table Entry.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.2281.10.8.1.5.6.2.2.1.4
genEquipEthernetSwitchEtmClassifierByUdpPortColor Color value for CoS Classification by UDP ports Table Entry.	MWRM-UNIT-MIBGreenYellowr/w Type Values: 0 green 1 yellow	.1.3.6.1.4.1.2281.10.8.1.5.6.2.2.1.5
genEquipEthernetSwitchEtmClassifierByUdpPortValidity Validity value for CoS Classification by UDP ports Table Entry.	Enumerationr/w Enumerated Values: 0 unused 1 src 2 dest 3 both	.1.3.6.1.4.1.2281.10.8.1.5.6.2.2.1.6
genEquipEthernetSwitchEtmClassifierByUdpPortRowStatus Row Status for this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2281.10.8.1.5.6.2.2.1.30

Table for CoS and color classification by known PDU MAC addresses.

genEquipEthernetSwitchEtmClassifierByKnownPduMacEntry row .1.3.6.1.4.1.2281.10.8.1.5.6.4.2.1

Table entry for CoS and color classification by known PDU MAC addresses.

Indexes

genEquipEthernetSwitchEtmClassifierByKnownPduMacIndex

Column	Syntax	OID
genEquipEthernetSwitchEtmClassifierByKnownPduMacIndex The index is pointing to a table entry. Each entry contains different PDU MAC address value.	Integer32 Constraints: range: 1-66	.1.3.6.1.4.1.2281.10.8.1.5.6.4.2.1.1
genEquipEthernetSwitchEtmClassifierByKnownPduMacAddress CoS value for MAC address Classification by known PDU Table Entry.	OctetString Constraints: range: 6-6	.1.3.6.1.4.1.2281.10.8.1.5.6.4.2.1.2
genEquipEthernetSwitchEtmClassifierByKnownPduMacCos CoS value for CoS Classification by known PDU Table Entry.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.2281.10.8.1.5.6.4.2.1.3
genEquipEthernetSwitchEtmClassifierByKnownPduMacColor Color value for CoS Classification by known PDU Table Entry.	MWRM-UNIT-MIBGreenYellowr/w Type Values: 0 green 1 yellow	.1.3.6.1.4.1.2281.10.8.1.5.6.4.2.1.4
genEquipEthernetSwitchEtmClassifierByKnownPduMacValidity Validity value for Cos Classification by known PDU Table Entry.	MWRM-UNIT-MIBEnableDisabler/w Type Values: 2 enable 3 disable	.1.3.6.1.4.1.2281.10.8.1.5.6.4.2.1.5

Table for CoS and color classification by service-ids.

genEquipEthernetSwitchEtmClassifierByServiceEntry row .1.3.6.1.4.1.2281.10.8.1.5.6.5.2.1

Table entry for CoS and color classification by service-ids.

Indexes

genEquipEthernetSwitchEtmClassifierByServiceIndex

Column	Syntax	OID
genEquipEthernetSwitchEtmClassifierByServiceIndex The index is pointing to a table entry. Each entry contains a mapping of service-id to CoS.	Integer32 Constraints: range: 1-256	.1.3.6.1.4.1.2281.10.8.1.5.6.5.2.1.1
genEquipEthernetSwitchEtmClassifierByServiceCos CoS value for CoS serviceID Mapping Table Entry.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.2281.10.8.1.5.6.5.2.1.2
genEquipEthernetSwitchEtmClassifierByServiceColor Color value for CoS serviceId Mapping Table Entry.	MWRM-UNIT-MIBGreenYellowr/w Type Values: 0 green 1 yellow	.1.3.6.1.4.1.2281.10.8.1.5.6.5.2.1.3
genEquipEthernetSwitchEtmClassifierByServiceUsage Validity value for CoS serviceID Mapping Table Entry.	MWRM-UNIT-MIBEnableDisabler/w Type Values: 2 enable 3 disable	.1.3.6.1.4.1.2281.10.8.1.5.6.5.2.1.4

Table for CoS and color classification by VLAN S-tag P-bits and DEI bit.

genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanEntry row .1.3.6.1.4.1.2281.10.8.1.5.6.6.2.1

Table entry for CoS and color classification by VLAN S-tag P-bits and DEI bit.

Indexes

genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanIndex

Column	Syntax	OID
genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanIndex Pbit vlan index to table.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.5.6.6.2.1.1
genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanPriority Pbit value for regular classification prioritization.	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.2281.10.8.1.5.6.6.2.1.2
genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanDei DEI value for regular classification prioritization by S-tag vlan.	Integer32 Constraints: range: 0-1	.1.3.6.1.4.1.2281.10.8.1.5.6.6.2.1.3
genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanCos CoS value for regular classification prioritization by S-tag VLAN.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.2281.10.8.1.5.6.6.2.1.4
genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanColor Color value for regular classification prioritization by S-tag VLAN.	MWRM-UNIT-MIBGreenYellowr/w Type Values: 0 green 1 yellow	.1.3.6.1.4.1.2281.10.8.1.5.6.6.2.1.5

Table for CoS and color classification by DSCP/TOS bits.

genEquipEthernetSwitchEtmClassifierByDscpEntry row .1.3.6.1.4.1.2281.10.8.1.5.6.7.2.1

Table entry for CoS and color classification by DSCP/TOS bits.

Indexes

genEquipEthernetSwitchEtmClassifierByDscpValue

Column	Syntax	OID
genEquipEthernetSwitchEtmClassifierByDscpValue The index is pointing to a table entry. Each entry contains different DSCP/TOS bits mapping.	Integer32 Constraints: range: 0-63	.1.3.6.1.4.1.2281.10.8.1.5.6.7.2.1.1
genEquipEthernetSwitchEtmClassifierByDscpCos CoS value for regular classification prioritization by DSCP-tag.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.2281.10.8.1.5.6.7.2.1.2
genEquipEthernetSwitchEtmClassifierByDscpColor Color value for regular classification prioritization by MPLS.	MWRM-UNIT-MIBGreenYellowr/w Type Values: 0 green 1 yellow	.1.3.6.1.4.1.2281.10.8.1.5.6.7.2.1.3

Table for CoS and color classification by MPLS experimental bits.

genEquipEthernetSwitchEtmClassifierByMplsExpEntry row .1.3.6.1.4.1.2281.10.8.1.5.6.8.2.1

Table entry for CoS and color classification by MPLS experimental bits.

Indexes

genEquipEthernetSwitchEtmClassifierByMplsExpValue

Column	Syntax	OID
genEquipEthernetSwitchEtmClassifierByMplsExpValue The index is pointing to a table entry. Each entry contains different MPLS experimantal bits mapping.	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.2281.10.8.1.5.6.8.2.1.1
genEquipEthernetSwitchEtmClassifierByMplsExpCos value for regular classification prioritization by MPLS.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.2281.10.8.1.5.6.8.2.1.2
genEquipEthernetSwitchEtmClassifierByMplsExpColor Color value for regular classification prioritization by MPLS.	MWRM-UNIT-MIBGreenYellowr/w Type Values: 0 green 1 yellow	.1.3.6.1.4.1.2281.10.8.1.5.6.8.2.1.3

Table for VLAN to FlowId mapping .

genEquipEthernetSwitchEtmClassifierByCosToQueueEntry row .1.3.6.1.4.1.2281.10.8.1.5.6.10.1.1

Table for VLAN to FlowId mapping .

Indexes

genEquipEthernetSwitchEtmClassifierByCosToQueueIndex

Column	Syntax	OID
genEquipEthernetSwitchEtmClassifierByCosToQueueIndex The index is pointing to a table entry. Each entry contains a mapping of a different CoS to a queue.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.5.6.10.1.1.1
genEquipEthernetSwitchEtmClassifierByCosToQueueValue Queue index for CoS to Queue Mapping Table Entry.	Integer32r/w Constraints: range: 1-8	.1.3.6.1.4.1.2281.10.8.1.5.6.10.1.1.2

Table for VLAN to Vlan To Servies mapping .

genEquipEthernetSwitchEtmClassifierVlanidToServiceEntry row .1.3.6.1.4.1.2281.10.8.1.5.6.11.1.1

Table for VLAN to Vlan To Servies mapping .

Indexes

genEquipEthernetSwitchEtmClassifierByServiceVlanidToServiceIndex

Column	Syntax	OID
genEquipEthernetSwitchEtmClassifierByServiceVlanidToServiceIndex The index is pointing to a table entry. Each entry contains a mapping of a different CoS to a queue.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.5.6.11.1.1.1
genEquipEthernetSwitchEtmClassifierByFlowsVlanidToServiceValue Service ID.	Integer32r/w Constraints: range: 1-256	.1.3.6.1.4.1.2281.10.8.1.5.6.11.1.1.2

Table of Service to Policeer mapping.

genEquipEthernetSwitchEtmServiceToPolicerEntry row .1.3.6.1.4.1.2281.10.8.1.5.8.2.1

Table of Service to Policeer mapping.

Indexes

genEquipEthernetSwitchEtmServiceToPolicerIndex

Column	Syntax	OID
genEquipEthernetSwitchEtmServiceToPolicerIndex Service Index.	Integer32 Constraints: range: 1-256	.1.3.6.1.4.1.2281.10.8.1.5.8.2.1.1
genEquipEthernetSwitchEtmServiceToPolicerValue Policer to be used for the specific Service.	Integer32r/w Constraints: range: 1-256	.1.3.6.1.4.1.2281.10.8.1.5.8.2.1.2
genEquipEthernetSwitchEtmServiceToPolicerPerCosOption Policer per CoS option. If enabled, each Service will be mapped to 8 policers while each policer will be used for a different CoS value. This option can be used only for the pilicers with indeces of multiple of 8. i.e 8…	MWRM-UNIT-MIBEnableDisabler/w Type Values: 2 enable 3 disable	.1.3.6.1.4.1.2281.10.8.1.5.8.2.1.3

Table of Policers configuration.

genEquipEthernetSwitchEtmPolicerConfigEntry row .1.3.6.1.4.1.2281.10.8.1.5.8.3.1

Table of Policers configuration.

Indexes

genEquipEthernetSwitchEtmPolicerConfigIndex

Column	Syntax	OID
genEquipEthernetSwitchEtmPolicerConfigIndex Service Index.	Integer32 Constraints: range: 1-256	.1.3.6.1.4.1.2281.10.8.1.5.8.3.1.1
genEquipEthernetSwitchEtmPolicerConfigAdmin Egress policer admin disables/enables the policing feature per policer. If not enabled, the policer is in bypass mode (no rate limiting).	MWRM-UNIT-MIBEnableDisabler/w Type Values: 2 enable 3 disable	.1.3.6.1.4.1.2281.10.8.1.5.8.3.1.2
genEquipEthernetSwitchEtmPolicerConfigColorAware Whether policer is color aware.	MWRM-UNIT-MIBEnableDisabler/w Type Values: 2 enable 3 disable	.1.3.6.1.4.1.2281.10.8.1.5.8.3.1.3
genEquipEthernetSwitchEtmPolicerConfigCir Egress policer CIR value - the committed rate user requests.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.5.8.3.1.4
genEquipEthernetSwitchEtmPolicerConfigCbs Egress policer committed burst size value.	Integer32r/w Constraints: range: 1-128	.1.3.6.1.4.1.2281.10.8.1.5.8.3.1.5
genEquipEthernetSwitchEtmPolicerConfigEir Egress policer EIR value - the excess rate user requests.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.5.8.3.1.6
genEquipEthernetSwitchEtmPolicerConfigEbs Egress policer excess burst size value (bytes).	Integer32r/w Constraints: range: 1-128	.1.3.6.1.4.1.2281.10.8.1.5.8.3.1.7
genEquipEthernetSwitchEtmPolicerConfigCoupling Egress policer coupling mode.	MWRM-UNIT-MIBEnableDisabler/w Type Values: 2 enable 3 disable	.1.3.6.1.4.1.2281.10.8.1.5.8.3.1.8
genEquipEthernetSwitchEtmPolicerConfigLineComp Egress policer line compensation value (bytes).	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2281.10.8.1.5.8.3.1.9

Table of queue sizes.

genEquipEthernetSwitchEtmQueuesEntry row .1.3.6.1.4.1.2281.10.8.1.5.9.1.1

Table entry of queue sizes.

Indexes

genEquipEthernetSwitchEtmQueuesIndex

Column	Syntax	OID
genEquipEthernetSwitchEtmQueuesIndex The Index to a queue.	Integer32 Constraints: range: 1-8	.1.3.6.1.4.1.2281.10.8.1.5.9.1.1.1
genEquipEthernetSwitchEtmQueuesSize Size of queue[i]	Enumerationr/w Enumerated Values: 0 kbit-0 1 kbit-500 2 kbit-1000 3 kbit-2000 4 kbit-4000 5 kbit-250 6 kbit-3000 7 kbit-3500	.1.3.6.1.4.1.2281.10.8.1.5.9.1.1.2

WRED thresholds per queue.

genEquipEthernetSwitchEtmWredThresholdsEntry row .1.3.6.1.4.1.2281.10.8.1.5.10.2.1

WRED entry thresholds per queue.

Indexes

genEquipEthernetSwitchEtmWredQueuesIndex

Column	Syntax	OID
genEquipEthernetSwitchEtmWredQueuesIndex WRED thresholds per queue.	Integer32 Constraints: range: 1-8	.1.3.6.1.4.1.2281.10.8.1.5.10.2.1.1
genEquipEthernetSwitchEtmWredThresholdsGreenThLow WRED green low threshold defines the queue level (in Kbits) point that the mechanism should start checking if to drop the green frames.	Integer32r/w Constraints: range: 0-4000	.1.3.6.1.4.1.2281.10.8.1.5.10.2.1.2
genEquipEthernetSwitchEtmWredThresholdsGreenThHigh WRED green high threshold defines the queue level of occupancy (in Kbits) point that the WRED must drop all arriving green colored frames.	Integer32r/w Constraints: range: 0-4000	.1.3.6.1.4.1.2281.10.8.1.5.10.2.1.3
genEquipEthernetSwitchEtmWredThresholdsYellowThLow WRED yellow low threshold defines the queue level (in Kbits) point that the mechanism should start checking if to drop the yellow frames.	Integer32r/w Constraints: range: 0-4000	.1.3.6.1.4.1.2281.10.8.1.5.10.2.1.4
genEquipEthernetSwitchEtmWredThresholdsYellowThHigh WRED yellow high threshold defines the queue level of occupancy (in Kbits) point that the WRED must drop all arriving yellow colored frames.	Integer32r/w Constraints: range: 0-4000	.1.3.6.1.4.1.2281.10.8.1.5.10.2.1.5
genEquipEthernetSwitchEtmWredThresholdsGreenMaxDrop WRED green max drop threshold the probability to drop frame at the green high threshold (in percent based units).	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.2281.10.8.1.5.10.2.1.6
genEquipEthernetSwitchEtmWredThresholdsYellowMaxDrop WRED yellow max drop threshold the probability to drop frame at the yellow high threshold (in percent based units).	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.2281.10.8.1.5.10.2.1.7

Table of CoS and color to Pbits and DEI marking for S-VALNS.

genEquipEthernetSwitchEtmMarkerEntry row .1.3.6.1.4.1.2281.10.8.1.5.11.2.1

Table of CoS and color to Pbits and DEI marking for S-VALNS.

Indexes

genEquipEthernetSwitchEtmMarkerCoS genEquipEthernetSwitchEtmMarkerColor

Column	Syntax	OID
genEquipEthernetSwitchEtmMarkerCoS CoS value as was mapped by the TM calssifier.	Integer32 Constraints: range: 1-8	.1.3.6.1.4.1.2281.10.8.1.5.11.2.1.1
genEquipEthernetSwitchEtmMarkerColor Color value as was mapped by the TM calssifier.	Integer32 Constraints: range: 1-2	.1.3.6.1.4.1.2281.10.8.1.5.11.2.1.2
genEquipEthernetSwitchEtmMarkerPbit VLAN 802.1p P-bit value to be modified.	Integer32r/w Constraints: range: 1-8	.1.3.6.1.4.1.2281.10.8.1.5.11.2.1.3
genEquipEthernetSwitchEtmMarkerCfi VLAN CFI/DEI value to be modified.	Integer32r/w Constraints: range: 1-2	.1.3.6.1.4.1.2281.10.8.1.5.11.2.1.4

Table for scheduler configuration: priority and weight for each queue.

genEquipEthernetSwitchEtmSchedulerConfigEntry row .1.3.6.1.4.1.2281.10.8.1.5.12.2.1

Table entry for scheduler configuration: priority and weight for each queue.

Indexes

genEquipEthernetSwitchEtmSchedulerConfigQueueIndex

Column	Syntax	OID
genEquipEthernetSwitchEtmSchedulerConfigQueueIndex queue index.	Integer32 Constraints: range: 1-8	.1.3.6.1.4.1.2281.10.8.1.5.12.2.1.1
genEquipEthernetSwitchEtmSchedulerConfigPriority Strict priority of each queue. 4=highest , 1=lowest.	Integer32r/w Constraints: range: 1-4	.1.3.6.1.4.1.2281.10.8.1.5.12.2.1.2
genEquipEthernetSwitchEtmSchedulerConfigWeight WFQ Weights for each queue	Integer32r/w Constraints: range: 0-15	.1.3.6.1.4.1.2281.10.8.1.5.12.2.1.3

Table of shapers' configurations. Each shaper is on the egress of a queue..

genEquipEthernetSwitchEtmShaperConfigEntry row .1.3.6.1.4.1.2281.10.8.1.5.13.2.1

Table entry of shapers' configurations. Each shaper is on the egress of a queue..

Indexes

genEquipEthernetSwitchEtmShaperConfigIndex

Column	Syntax	OID
genEquipEthernetSwitchEtmShaperConfigIndex queue index.	Integer32 Constraints: range: 1-8	.1.3.6.1.4.1.2281.10.8.1.5.13.2.1.1
genEquipEthernetSwitchEtmShaperConfigAdmin Egress Shaper admin disables/enables the shaping feature per queue.	MWRM-UNIT-MIBEnableDisabler/w Type Values: 2 enable 3 disable	.1.3.6.1.4.1.2281.10.8.1.5.13.2.1.2
genEquipEthernetSwitchEtmShaperConfigCir Egress shaper CIR value - the committed rate as given by the user.	Integer32r/w Constraints: range: 0-1000000	.1.3.6.1.4.1.2281.10.8.1.5.13.2.1.3
genEquipEthernetSwitchEtmShaperConfigCbs Egress shaper committed burst size value.	Integer32r/w Constraints: range: 0-128000	.1.3.6.1.4.1.2281.10.8.1.5.13.2.1.4
genEquipEthernetSwitchEtmShaperConfigLineComp Egress shaper line compensation value transmitted IFG + Preamble. The shaper adds this value to each arriving frame size.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2281.10.8.1.5.13.2.1.5

A table containing NE configuration and maintenance attributes which are not part of the standard MIB.

genEquipProtocolsMstpGeneralAttributesEntry row .1.3.6.1.4.1.2281.10.8.1.6.1.1.1

A table containing NE configuration and maintenance attributes which are not part of the standard MIB.

Indexes

genEquipProtocolsMstpGeneralAttributesComponentId

Column	Syntax	OID
genEquipProtocolsMstpGeneralAttributesComponentId Distinguished between multiple virtual bridge instances within a PB or PBB. In simple situations, i.e. single component the default is 1	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.1.1.1.1
genEquipProtocolsMstpGeneralAttributesMstpEnabled When set, MSTP protocol is enabled on NE	TrueFalser/w Type Values: 0 false 1 true	.1.3.6.1.4.1.2281.10.8.1.6.1.1.1.2
genEquipProtocolsMstpGeneralAttributesNumberOfinstances Specifies number of instances supported. Value ranges from 2 to 16.	Integer32r/w Constraints: range: 2-16	.1.3.6.1.4.1.2281.10.8.1.6.1.1.1.3
genEquipProtocolsMstpGeneralAttributesMigrateTime When MSTP bridge detects the presence of STP data on one of its ports, it migrates after 'MigrateTime' has elapsed, if migrate is enabled.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.1.1.1.4
genEquipProtocolsMstpGeneralAttributesBpduDestinationMAC When set to 'customer', BPDU Dest MAC address should be set to 0x0180-C200-0000. Otherwise, BPDU Dest MAC address should be set to 0x0180-C200-0008	Enumerationr/w Enumerated Values: 0 customer 1 provider	.1.3.6.1.4.1.2281.10.8.1.6.1.1.1.5
genEquipProtocolsMstpGeneralAttributesFrozen When set, MSTP protocol stops running in NE., i.e. BPDU are neither processed nor transmitted. All ports states are maintained.	TrueFalser/w Type Values: 0 false 1 true	.1.3.6.1.4.1.2281.10.8.1.6.1.1.1.6
genEquipProtocolsMstpGeneralAttributesSdHandling When set to 'ignored', SD (Signal Degrade) failures are ignored in MSTP. Otherwise, SD failures are treated same as SF.	Enumerationr/w Enumerated Values: 0 ignored 1 sameAsSF	.1.3.6.1.4.1.2281.10.8.1.6.1.1.1.7
genEquipProtocolsMstpGeneralAttributesReset When set to reset, MSTP Protocol suit is reset	Enumerationr/w Enumerated Values: 0 noAction 1 reset	.1.3.6.1.4.1.2281.10.8.1.6.1.1.1.8
genEquipProtocolsMstpGeneralAttributesResetCounters When set to reset, MSTP counters are reset	Enumerationr/w Enumerated Values: 0 noAction 1 reset	.1.3.6.1.4.1.2281.10.8.1.6.1.1.1.9

A table containing MSTP counters per instance per port.

genEquipProtocolsMstpCountersEntry row .1.3.6.1.4.1.2281.10.8.1.6.1.2.1

A table containing MSTP counters per instance per port.

Indexes

genEquipProtocolsMstpCountersPortId

Column	Syntax	OID
genEquipProtocolsMstpCountersPortId Port ID (ifIndex)	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.1.2.1.1
genEquipProtocolsMstpCountersNumberOfReceivedTCN Number of received TCN	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.1.2.1.2
genEquipProtocolsMstpCountersNumberOfReceivedConfigurationBpdu Number of received Configuration BPDU.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.1.2.1.3
genEquipProtocolsMstpCountersNumberOfReceivedRstBpdu Number of received RST BPDU.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.1.2.1.4
genEquipProtocolsMstpCountersNumberOfReceivedMstBpdu Number of received MST BPDU	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.1.2.1.5
genEquipProtocolsMstpCountersNumberOfTransmittedTcnBpdu Number Of Transmitted TCN BPDU.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.1.2.1.6
genEquipProtocolsMstpCountersNumberOfTransmittedConfigurationBpdu Number of transmitted Configuration BPDU.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.1.2.1.7
genEquipProtocolsMstpCountersNumberOfTransmittedRstBpdu Number of transmitted RST BPDU	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.1.2.1.8
genEquipProtocolsMstpCountersNumberOfTransmittedMstBpdu Number of transmitted MST BPDU	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.1.2.1.9

A Table containing Ethernet OAM Configuration and Status.

genEquipProtocolsEoamBwVsmEntry row .1.3.6.1.4.1.2281.10.8.1.6.2.1.1

A Table entry containing Ethernet OAM Configuration and Status.

Indexes

genEquipProtocolsEoamBwVsmName

Column	Syntax	OID
genEquipProtocolsEoamBwVsmName Name of EOAM entity	RFC1213-MIBDisplayString	.1.3.6.1.4.1.2281.10.8.1.6.2.1.1.1
genEquipProtocolsEoamBwVsmAdmin Eoam Admin. Possible valuew: Up, Down	Dot1CfmInterfaceStatusr/w Type Values: 0 no-interface 1 up 2 down 3 testing 4 unknown 5 dormant 6 not-present 7 lower-layer-down	.1.3.6.1.4.1.2281.10.8.1.6.2.1.1.2
genEquipProtocolsEoamBwVsmPeriod The interval of transmitting messages, when current nominal.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.2.1.1.3
genEquipProtocolsEoamBwVsmCurrentBw The Current BW measure by 4 samples (with 250msec interval)	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.2.1.1.4
genEquipProtocolsEoamBwVsmControlIfindex Control Interface of the eoam entity	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.2.1.1.5
genEquipProtocolsEoamBwVsmId EOAM index.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.2.1.1.6
genEquipProtocolsEoamBwVsmMonitoredIfindex Monitored Interface of the eoam entity	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.2.1.1.7
genEquipProtocolsEoamBwVsmHoldoff The holdoff time in which, if BW below nominal, a message is sent	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.2.1.1.8
genEquipProtocolsEoamBwVsmHoldoffStartTime The holdoff start counting time	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.2.1.1.9
genEquipProtocolsEoamBwVsmHoldoffState The holdoff state of the EOAM entity	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.2.1.1.10
genEquipProtocolsEoamBwVsmLastSentMsg The last EOAM message transmitted	OctetString	.1.3.6.1.4.1.2281.10.8.1.6.2.1.1.11
genEquipProtocolsEoamBwVsmMel The MEL to be set in the bw-vsm messages	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.2.1.1.12
genEquipProtocolsEoamBwVsmMonitoringInterval The monitoring interval of the average BE calculation	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.2.1.1.13
genEquipProtocolsEoamBwVsmNominalBw The nominal BW of the monitored interface, to be set in the bw-vsm messages	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.2.1.1.14
genEquipProtocolsEoamBwVsmTxMsgCounter The number of transmitted messages	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.2.1.1.15
genEquipProtocolsEoamBwVsmVersion EOAM version used	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.2.1.1.16
genEquipProtocolsEoamBwVsmVlan The VLAN to be set in the bw-vsm messages	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.2.1.1.17
genEquipProtocolsEoamBwVsmResetMsgCounter Reset Messages Counter	MWRM-UNIT-MIBOffOnr/w Type Values: 0 off 1 on	.1.3.6.1.4.1.2281.10.8.1.6.2.1.1.18
genEquipProtocolsEoamBwVsmRowStatus Table Mib Row Status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2281.10.8.1.6.2.1.1.30

A table containing ERPI attributes.

genEquipProtocolsG8032ErpiAttributesEntry row .1.3.6.1.4.1.2281.10.8.1.6.3.10.1

A table entry containing ERPI attributes.

Indexes

genEquipProtocolsG8032ErpiAttributesErpiId

Column	Syntax	OID
genEquipProtocolsG8032ErpiAttributesErpiId ERPI ID	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.3.10.1.1
genEquipProtocolsG8032ErpiAttributesErpiName ERPI Name	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.2281.10.8.1.6.3.10.1.2
genEquipProtocolsG8032ErpiAttributesGuardTime Indicates the ERPI Guard Time; units are msec, steps are 10msec.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.3.10.1.3
genEquipProtocolsG8032ErpiAttributesHoldoffTime The ERPI holdoff Time; units are msec, steps are 100msec. Controls the time from failure detection to responding to failure	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.3.10.1.4
genEquipProtocolsG8032ErpiAttributesLastChangeTs Denotes the Timestamp of the last ring state machine transition	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.3.10.1.5
genEquipProtocolsG8032ErpiAttributesLastHpRequest Describes the last high-priority request.	G8032LastState Type Values: 0 nr 1 raps-nr 2 raps-rb-nr 3 running-wtb 4 expired-wtb 5 running-wtr 6 expired-wtr 7 ms 8 raps-ms 9 raps-sd 10 clear-sd 11 local-sd 12 raps-sf 13 clear-sf 14 local-sf 15 raps-fs 16 fs 17 clear	.1.3.6.1.4.1.2281.10.8.1.6.3.10.1.6
genEquipProtocolsG8032ErpiAttributesLastLocalState Describes the current local state that is input to the ERPI state machine	G8032LastState Type Values: 0 nr 1 raps-nr 2 raps-rb-nr 3 running-wtb 4 expired-wtb 5 running-wtr 6 expired-wtr 7 ms 8 raps-ms 9 raps-sd 10 clear-sd 11 local-sd 12 raps-sf 13 clear-sf 14 local-sf 15 raps-fs 16 fs 17 clear	.1.3.6.1.4.1.2281.10.8.1.6.3.10.1.7
genEquipProtocolsG8032ErpiAttributesLastRemoteState Describes the last event received from the far end	G8032LastState Type Values: 0 nr 1 raps-nr 2 raps-rb-nr 3 running-wtb 4 expired-wtb 5 running-wtr 6 expired-wtr 7 ms 8 raps-ms 9 raps-sd 10 clear-sd 11 local-sd 12 raps-sf 13 clear-sf 14 local-sf 15 raps-fs 16 fs 17 clear	.1.3.6.1.4.1.2281.10.8.1.6.3.10.1.8
genEquipProtocolsG8032ErpiAttributesMegLevel Indicates MEG LEVEL, when interoperating with SOAM	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.3.10.1.9
genEquipProtocolsG8032ErpiAttributesDownMep Indicates if the ERPI is related to a down MEP and if to which one	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.3.10.1.10
genEquipProtocolsG8032ErpiAttributesRevertive Indicates whether the ERPI is revertive	IfMgrTrueFalse Type Values: 1 true 2 false	.1.3.6.1.4.1.2281.10.8.1.6.3.10.1.11
genEquipProtocolsG8032ErpiAttributesRingState Describes the state in which id ERPI is assumed. Possible states are: Initializing, Idle, Pending, Protecting, FS, MS)	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.3.10.1.12
genEquipProtocolsG8032ErpiAttributesRplOwner Indicates whether the ERPI is RPL owner and if such, which ERPI Port is the owner	Enumerationr/w Enumerated Values: 0 none 1 west 2 east 3 sub-ring	.1.3.6.1.4.1.2281.10.8.1.6.3.10.1.13
genEquipProtocolsG8032ErpiAttributesSdHandling Indicates the ERPI takes into account SD (Signal Degraded) events (BER, capacity degradation)	IfMgrTrueFalser/w Type Values: 1 true 2 false	.1.3.6.1.4.1.2281.10.8.1.6.3.10.1.14
genEquipProtocolsG8032ErpiAttributesServiceId Indicates Service ID of the ERPI	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.3.10.1.15
genEquipProtocolsG8032ErpiAttributesErpiType ERPI Type ( ring / sub-ring / ring with sub-ring port)	Enumerationr/w Enumerated Values: 0 ring 1 sub-ring 2 ring-with-sub-ring	.1.3.6.1.4.1.2281.10.8.1.6.3.10.1.16
genEquipProtocolsG8032ErpiAttributesVersion Indicates the ERPI version number used in the ERPI protocol	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.3.10.1.17
genEquipProtocolsG8032ErpiAttributesVirtualChannel VLAN of virtual channel; 0 denotes no virtual channel	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.3.10.1.18
genEquipProtocolsG8032ErpiAttributesWtr Indicates the ERPI WTR; units are minutes	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.3.10.1.19
genEquipProtocolsG8032ErpiAttributesRowStatus Table Mib Row Status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2281.10.8.1.6.3.10.1.30

A table containing ERP port attributes.

genEquipProtocolsG8032ErpiPortAttributesEntry row .1.3.6.1.4.1.2281.10.8.1.6.3.11.1

A table entry containing ERP port attributes.

Indexes

genEquipProtocolsG8032ErpiPortAttributesErpiId genEquipProtocolsG8032ErpiPortAttributesErpiIfindex

Column	Syntax	OID
genEquipProtocolsG8032ErpiPortAttributesErpiId Denotes the ERPI ID	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.3.11.1.1
genEquipProtocolsG8032ErpiPortAttributesErpiIfindex g8032_erp_port_sp_index	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.3.11.1.2
genEquipProtocolsG8032ErpiPortAttributesActiveState Denotes if G8032 port (SP) is active for traffic forwarding or not	IfMgrTrueFalse Type Values: 1 true 2 false	.1.3.6.1.4.1.2281.10.8.1.6.3.11.1.3
genEquipProtocolsG8032ErpiPortAttributesDataFwdState Specifies whether the port is forwarding or blocking data	IfMgrTrueFalse Type Values: 1 true 2 false	.1.3.6.1.4.1.2281.10.8.1.6.3.11.1.4
genEquipProtocolsG8032ErpiPortAttributesDefectState Defines the ERPI Port Oper-state derived from port. It is updates when Oper-state is changed.	Enumeration Enumerated Values: 0 no-defect 1 sd-defect 2 sf-defect	.1.3.6.1.4.1.2281.10.8.1.6.3.11.1.5
genEquipProtocolsG8032ErpiPortAttributesRapsChannelFwdState Specifies whether the port is forwarding or blocking raps frames	IfMgrTrueFalse Type Values: 1 true 2 false	.1.3.6.1.4.1.2281.10.8.1.6.3.11.1.6
genEquipProtocolsG8032ErpiPortAttributesRplLinkBlockState Specifies whether the RPL is in blocking state. relevant only for RPL owner	IfMgrTrueFalse Type Values: 1 true 2 false	.1.3.6.1.4.1.2281.10.8.1.6.3.11.1.7
genEquipProtocolsG8032ErpiPortAttributesRxInvalidRapsFrames Number of invalid R-APS PDU received	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.3.11.1.8
genEquipProtocolsG8032ErpiPortAttributesRxRapsEvents Number of events R-APS PDU received	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.3.11.1.9
genEquipProtocolsG8032ErpiPortAttributesRxRapsFrames Number of R-APS PDU received	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.3.11.1.10
genEquipProtocolsG8032ErpiPortAttributesFs Number of FS PDU received	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.3.11.1.11
genEquipProtocolsG8032ErpiPortAttributesMs Number of MS PDU received	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.3.11.1.12
genEquipProtocolsG8032ErpiPortAttributesNr Number of NR R-APS PDU received	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.3.11.1.13
genEquipProtocolsG8032ErpiPortAttributesRb Number of RB R-APS PDU received	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.3.11.1.14
genEquipProtocolsG8032ErpiPortAttributesSd Number of SD R-APS PDU received	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.3.11.1.15
genEquipProtocolsG8032ErpiPortAttributesSf Number of SF R-APS PDU received	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.3.11.1.17
genEquipProtocolsG8032ErpiPortAttributesCapacityDegRatioThreshold The capacity degradation threshold, in percentage, from which SD is indicated from this ERPI Port	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.3.11.1.18
genEquipProtocolsG8032ErpiPortAttributesSpId Service Point ID	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.3.11.1.19
genEquipProtocolsG8032ErpiPortAttributesTxRapsCntrol When value is False, R-APS are not transmitted by ERPI Port	IfMgrTrueFalse Type Values: 1 true 2 false	.1.3.6.1.4.1.2281.10.8.1.6.3.11.1.20
genEquipProtocolsG8032ErpiPortAttributesTxRapsEvents Number of events R-APS PDU transmitted	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.3.11.1.21
genEquipProtocolsG8032ErpiPortAttributesTxRapsFrames Number of Total R-APS PDU transmitted	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.3.11.1.22
genEquipProtocolsG8032ErpiPortAttributesTxRapsFs Number of FS R-APS PDU transmitted	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.3.11.1.23
genEquipProtocolsG8032ErpiPortAttributesTxRapsMs Number of MS R-APS PDU transmitted	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.3.11.1.24
genEquipProtocolsG8032ErpiPortAttributesTxRapsNr Number of NR R-APS PDU transmitted	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.3.11.1.25
genEquipProtocolsG8032ErpiPortAttributesTxRapsRb Number of RB R-APS PDU transmitted	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.3.11.1.26
genEquipProtocolsG8032ErpiPortAttributesTxRapsSd Number of SD R-APS PDU transmitted	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.3.11.1.27
genEquipProtocolsG8032ErpiPortAttributesTxRapsSf Number of SF R-APS PDU transmitted	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.3.11.1.28
genEquipProtocolsG8032ErpiPortAttributesClearCommand Clear Command	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.3.11.1.29
genEquipProtocolsG8032ErpiPortAttributesRowStatus Table Mib Row Status	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2281.10.8.1.6.3.11.1.30
genEquipProtocolsG8032ErpiPortAttributesFsCommand Force Switch (FS)	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.3.11.1.31
genEquipProtocolsG8032ErpiPortAttributesMsCommand Manual Switch (MS)	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.3.11.1.32

A table containg MEP attributes.

genEquipProtocolsSoamMepEntry row .1.3.6.1.4.1.2281.10.8.1.6.4.10.1

A table entry containg MEP attributes.

Indexes

genEquipProtocolsSoamMepMdIndex genEquipProtocolsSoamMepMaIndex genEquipProtocolsSoamMepMepIndentifier

Column	Syntax	OID
genEquipProtocolsSoamMepMdIndex MD Index	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.4.10.1.1
genEquipProtocolsSoamMepMaIndex MA/MEG Index	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.4.10.1.2
genEquipProtocolsSoamMepMepIndentifier MEP ID	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.4.10.1.3
genEquipProtocolsSoamMepSpId Service Point ID	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.4.10.1.4
genEquipProtocolsSoamMepLastSessionLbmOut Number of LBM frames transmitted during the current/last session	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.4.10.1.5
genEquipProtocolsSoamMepLastSessionlbmToSend Number of LBM frames left to send in the session	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.4.10.1.6
genEquipProtocolsSoamMepLastSessionLbrIn Number of LBR messages received during the current/last session	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.4.10.1.7
genEquipProtocolsSoamMepLastSessionlbState Specifies the loopback session State	LBState Type Values: 0 soamLbInactive 1 soamLbActive 2 soamLbStopped 3 soamLbCompleted 4 soamLbFailed	.1.3.6.1.4.1.2281.10.8.1.6.4.10.1.8
genEquipProtocolsSoamMepLbmOut Specifies the mumber of the LBM frames transmitted	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.4.10.1.9

A table containing SOAM MA/MEG network identical attributes common to 802.1ag.

genEquipProtocolsSoamMegEntry row .1.3.6.1.4.1.2281.10.8.1.6.4.11.1

A table entry containing SOAM MA/MEG network identical attributes common to 802.1ag.

Indexes

genEquipProtocolsSoamMegMdIndex genEquipProtocolsSoamMegMaIndex

Column	Syntax	OID
genEquipProtocolsSoamMegMdIndex MD Index	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.4.11.1.1
genEquipProtocolsSoamMegMaIndex MA/MEG Index	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.4.11.1.2
genEquipProtocolsSoamMegServiceId Service ID	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.1.6.4.11.1.3

TDM Trails configuration and status table.

genEquipTdmTrailsEntry row .1.3.6.1.4.1.2281.10.8.2.1.1

TDM Trails PM table.

Indexes

genEquipTdmTrailID

Column	Syntax	OID
genEquipTdmTrailID The Trail ID. This parameter is the index of the table.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.2281.10.8.2.1.1.1
genEquipTdmTrailDescr Trail description.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.2281.10.8.2.1.1.2
genEquipTdmTrailProtected This parameter indicates whether the trail is protected or not.	Enumerationr/w Enumerated Values: 0 unProtected 1 protected 2 protectedAbr	.1.3.6.1.4.1.2281.10.8.2.1.1.3
genEquipTdmTrailAcmPrio The ACM priority of the trail. In case of High priority TDM trail, ACM is enabled on the link and there is a reduction of the link capacity, this trail will be prioritized before the low priority trails to be dropped.	Enumerationr/w Enumerated Values: 0 low 1 high	.1.3.6.1.4.1.2281.10.8.2.1.1.4
genEquipTdmTrailOperStatus The status of the TDM trail. in operational case, the trail is active/enabled and send alarms.	Enumerationr/w Enumerated Values: 0 reserved 1 operational	.1.3.6.1.4.1.2281.10.8.2.1.1.5
genEquipTdmTrailAlarmStatus The alarm status of the trail active path. The value is a Bit Map: Id-Mismatch(0x01), Excessive-Ber(0x02), Signal-Degrade-Ber(0x04), Invalid-Trail-Status(0x08), Signal-Failure(0x10), RDI-Detected(0x20).	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.2.1.1.6
genEquipTdmTrailSrcSlot Trail source slot number.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.2.1.1.7
genEquipTdmTrailSrcType The type of the source interface of the trail line(0), radio(1),stm-1-oc-3(2), sync(4).	MWRM-UNIT-MIBTrailIfTyper/w Type Values: -1 unknown 0 line 1 radio 2 stm-1-oc-3 4 sync	.1.3.6.1.4.1.2281.10.8.2.1.1.8
genEquipTdmTrailSrcNum The interface number, for example E1 number 5. in case of a line.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.2.1.1.9
genEquipTdmTrailDest1Slot The slot destination of the trail.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.2.1.1.10
genEquipTdmTrailDest1Type The interface type destination of the trail.	MWRM-UNIT-MIBTrailIfTyper/w Type Values: -1 unknown 0 line 1 radio 2 stm-1-oc-3 4 sync	.1.3.6.1.4.1.2281.10.8.2.1.1.11
genEquipTdmTrailDest1Num The destination interface number.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.2.1.1.12
genEquipTdmTrailDest2Slot A secondary slot number that is being used when protection is enabled.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.2.1.1.13
genEquipTdmTrailDest2Type A secondary interface type that is being used when protection is enabled.	MWRM-UNIT-MIBTrailIfTyper/w Type Values: -1 unknown 0 line 1 radio 2 stm-1-oc-3 4 sync	.1.3.6.1.4.1.2281.10.8.2.1.1.14
genEquipTdmTrailDest2Num A secondary interface number that is being used when protection is enabled.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.2.1.1.15
genEquipTdmTrailProtectedForceActive Force active of the primary or the secondary trails.	MWRM-UNIT-MIBTrailProtectedTyper/w Type Values: 0 none 1 primary 2 secondary	.1.3.6.1.4.1.2281.10.8.2.1.1.16
genEquipTdmTrailProtectedActiveTrail The trail current active path. That tells us Who is the active trail.	MWRM-UNIT-MIBTrailProtectedType Type Values: 0 none 1 primary 2 secondary	.1.3.6.1.4.1.2281.10.8.2.1.1.17
genEquipTdmTrailProtectedNumOfSwitches The value represent the number of switches in SNCP between the primary and secondary trails. Setting this value to 0, clears this counter	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.2.1.1.18
genEquipTdmTrailPrimaryPathAlarmStatus The alarm status of the trail primary path. The value is a Bit Map: Id-Mismatch(0x01), Excessive-Ber(0x02), Signal-Degrade-Ber(0x04), Invalid-Trail-Status(0x08), Signal-Failure(0x10), RDI-Detected(0x20).	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.2.1.1.19
genEquipTdmTrailSecondaryPathAlarmStatus The alarm status of the trail secondary path. The value is a Bit Map: Id-Mismatch(0x01), Excessive-Ber(0x02), Signal-Degrade-Ber(0x04), Invalid-Trail-Status(0x08), Signal-Failure(0x10), RDI-Detected(0x20).	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.2.1.1.20
genEquipTdmTrailRowStatus The Row status of the entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2281.10.8.2.1.1.30

Synchronization source table.

genEquipSynchronizationSrcEntry row .1.3.6.1.4.1.2281.10.8.3.1.1

Synchronization source table.

Indexes

genEquipSynchronizationSrcPriority

Column	Syntax	OID
genEquipSynchronizationSrcPriority The source for system synchronization (primary, seconday).	Integer32 Constraints: range: 1-8	.1.3.6.1.4.1.2281.10.8.3.1.1.1
genEquipSynchronizationSrcSlot The slot number of the sync source (1..6). Possible values: - standalone(0) - slot1(1) - slot2(2) - slot3(3) - slot4(4) - slot5(5) - slot6(6)	MWRM-UNIT-MIBSlotIdr/w Type Values: 0 standalone 1 slot1 2 slot2 3 slot3 4 slot4 5 slot5 6 slot6 7 slot7 8 slot8 9 slot9 10 slot10 11 slot11 12 slot12	.1.3.6.1.4.1.2281.10.8.3.1.1.2
genEquipSynchronizationSrcType The interface type (line (PDH), Radio, STM-1/OC-3), or signal coming from the PW card.	Enumerationr/w Enumerated Values: -1 unknown 0 line 1 radio-ch 2 stm-vc 3 pw 4 stm-signal 5 ether 6 pw-reference-clock	.1.3.6.1.4.1.2281.10.8.3.1.1.3
genEquipSynchronizationSrcNum The sync source number: VC in STM-1/OC-3, Radio channel in case the interface is Radio, or E1 number in case the interface is PDH (E1s).	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.3.1.1.4
genEquipSynchronizationSrcValid This paremter is the source status, if the source if valid or not. In case it is valid, it means that the clock being extracted from the source is ok and can be used. In case it is not-valid the source is not in use, ea…	Enumeration Enumerated Values: 0 not-valid 1 valid	.1.3.6.1.4.1.2281.10.8.3.1.1.5
genEquipSynchronizationSrcTrail This parameter indicates whether the synchronization source is the signal of an existing co-located TDM trail used for traffic. Enabling this parameter in an interface which does not belong to a trail will fail, as well…	MWRM-UNIT-MIBEnableDisabler/w Type Values: 2 enable 3 disable	.1.3.6.1.4.1.2281.10.8.3.1.1.6
genEquipSynchronizationSrcAdmin Admin state of the sync source (the sync source is enabled or disabled).	MWRM-UNIT-MIBEnableDisabler/w Type Values: 2 enable 3 disable	.1.3.6.1.4.1.2281.10.8.3.1.1.7
genEquipSynchronizationSrcQuality parameter configures the quality of the incoming clock signal.	Enumerationr/w Enumerated Values: 0 automatic 1 prs 2 g811 3 transit-node 4 ssu-a 5 unknown 7 stratum2 8 ssu-b 10 stratum3 11 g813-8262 12 smc 13 stratum3e 15 do-not-use	.1.3.6.1.4.1.2281.10.8.3.1.1.8
genEquipSynchronizationSrcReceivedSSM This parameter shows the current value of the received SSM messages.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2281.10.8.3.1.1.9
genEquipSynchronizationSrcQualityStatus This parameter shows the current quality level of the interface.	Enumeration Enumerated Values: 0 automatic 1 prs 2 g811 3 transit-node 4 ssu-a 5 unknown 7 stratum2 8 ssu-b 10 stratum3 11 g813-8262 12 smc 13 stratum3e 15 do-not-use 16 failure	.1.3.6.1.4.1.2281.10.8.3.1.1.10