MRV-IR-CHAR-MIB Table View

A list of character port entries.

irCharPortEntry row .1.3.6.1.4.1.33.100.2.2.1

A character port entry.

Indexes

irCharPortIndex

Column	Syntax	OID
irCharPortIndex An index value that uniquely identifies a port.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.33.100.2.2.1.1
irCharPortAccessType The access type value for the port.	PortAccessTyper/w Type Values: 1 local 2 remote 3 dynamic 4 power 5 sensor 6 apd 7 dataBuffer 8 tcpPipe 9 control 10 master 11 slave 12 ppp 13 notify 14 none 16 hdam 17 ldam 18 lpd 19 ups	.1.3.6.1.4.1.33.100.2.2.1.2
irCharPortFlowControl The flow control mechanism configured for the port.	Enumerationr/w Enumerated Values: 1 none 2 xon 3 cts	.1.3.6.1.4.1.33.100.2.2.1.3
irCharPortStopBits The number of stop bits configured for the port.	Integer32r/w Constraints: range: 1-2	.1.3.6.1.4.1.33.100.2.2.1.4
irCharPortParity The parity configured for the port.	Enumerationr/w Enumerated Values: 1 none 2 odd 3 even 4 mark 5 space	.1.3.6.1.4.1.33.100.2.2.1.5
irCharPortBitsPerChar The number of bits per character.	Integer32r/w Constraints: range: 7-8	.1.3.6.1.4.1.33.100.2.2.1.6
irCharPortAutoDialdeprecated The auto dial setting for the port. This object has been deprecated and will be removed in the next release.	Enumeration Enumerated Values: 1 disabled 2 enabled	.1.3.6.1.4.1.33.100.2.2.1.7
irCharPortAutoHangup The auto hangup setting for the port.	Enumerationr/w Enumerated Values: 1 disabled 2 enabled	.1.3.6.1.4.1.33.100.2.2.1.8
irCharPortAutobaud The autobaud status for the port.	Enumerationr/w Enumerated Values: 1 disabled 2 enabled	.1.3.6.1.4.1.33.100.2.2.1.9
irCharPortAutobaudRetry The autobaud retry interval (in secods).	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.33.100.2.2.1.10
irCharPortInSignalCts The current value of the input CTS signal.	SignalStatus Type Values: 1 up 2 down	.1.3.6.1.4.1.33.100.2.2.1.11
irCharPortInSignalDsr The current value of the input DSR signal.	SignalStatus Type Values: 1 up 2 down	.1.3.6.1.4.1.33.100.2.2.1.12
irCharPortInSignalDcd The current value of the input DCD signal.	SignalStatus Type Values: 1 up 2 down	.1.3.6.1.4.1.33.100.2.2.1.13
irCharPortOutSignalRts The current value of the output RTS signal.	SignalStatusr/w Type Values: 1 up 2 down	.1.3.6.1.4.1.33.100.2.2.1.14
irCharPortOutSignalDtr The current value of the output DTR signal.	SignalStatusr/w Type Values: 1 up 2 down	.1.3.6.1.4.1.33.100.2.2.1.15
irCharPortSpeed The port speed in bits per second.	PortSpeedr/w Type Values: 1 sp134 2 sp200 3 sp300 4 sp600 5 sp1200 6 sp2400 7 sp4800 8 sp9600 9 sp19200 10 sp38400 11 sp57600 12 sp115200 13 sp230400 14 sp460800 15 sp921600	.1.3.6.1.4.1.33.100.2.2.1.16
irCharPortPrompt An administratively assigned prompt for the port.	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.33.100.2.2.1.17
irCharPortBreak The break status for the port.	Enumerationr/w Enumerated Values: 1 disabled 2 enabled	.1.3.6.1.4.1.33.100.2.2.1.18
irCharPortSpecialBreakString An administratively assigned special break string for the port.	OctetStringr/w Constraints: range: 0-7	.1.3.6.1.4.1.33.100.2.2.1.19
irCharPortSpecialBreak The special break status for the port.	Enumerationr/w Enumerated Values: 1 disabled 2 enabled	.1.3.6.1.4.1.33.100.2.2.1.20
irCharPortInboundAuth The inbound authentication status for the port.	PortAuthTyper/w Type Values: 1 none 2 securid 3 radius 4 tacacs 5 ldap 6 local	.1.3.6.1.4.1.33.100.2.2.1.21
irCharPortOutboundAuth The outbound authentication status for the port.	PortAuthTyper/w Type Values: 1 none 2 securid 3 radius 4 tacacs 5 ldap 6 local	.1.3.6.1.4.1.33.100.2.2.1.22
irCharPortAuthFallback The Authentication fallback attempts for the port.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.33.100.2.2.1.23
irCharPortRadiusAcct The Radius accounting status for the port.	Enumerationr/w Enumerated Values: 1 disabled 2 enabled	.1.3.6.1.4.1.33.100.2.2.1.24
irCharPortTacacsAcct The Tacacs accounting status for the port.	Enumerationr/w Enumerated Values: 1 disabled 2 enabled	.1.3.6.1.4.1.33.100.2.2.1.25
irCharPortTransparent The transparent status for the port.	Enumerationr/w Enumerated Values: 1 disabled 2 enabled	.1.3.6.1.4.1.33.100.2.2.1.26
irCharPortDataBufferSize An administratively assigned data buffer log size	Integer32r/w Constraints: range: 1024-65535	.1.3.6.1.4.1.33.100.2.2.1.27
irCharPortDataBufferSyslog The data buffer syslog status for the port.	Enumerationr/w Enumerated Values: 1 disabled 2 enabled	.1.3.6.1.4.1.33.100.2.2.1.28
irCharPortDataBufferDisplay The data buffer display status for the port.	Enumerationr/w Enumerated Values: 1 disabled 2 enabled 3 prompt	.1.3.6.1.4.1.33.100.2.2.1.29
irCharPortDataBufferTimeStamp The data buffer time stamp status for the port.	Enumerationr/w Enumerated Values: 1 disabled 2 enabled	.1.3.6.1.4.1.33.100.2.2.1.30
irCharPortTelnetPort The configured port used to telnet to the device attached to this port.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.33.100.2.2.1.31
irCharPortSshPort The configured port used to SSH to the device attached to this port.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.33.100.2.2.1.32

A list of character port stats entries.

irCharPortStatsEntry row .1.3.6.1.4.1.33.100.2.3.1

A character port stats entry.

Indexes

No indexes recorded

Column	Syntax	OID
irCharPortTransmitBytes The number of bytes transmitted on the port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.33.100.2.3.1.1
irCharPortReceiveBytes The number of bytes received on the port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.33.100.2.3.1.2
irCharPortFrameErrors The number of frame errors on the port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.33.100.2.3.1.3
irCharPortOverrunErrors The number of overrun errors on the port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.33.100.2.3.1.4
irCharPortParityErrors The number of parity errors on the port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.33.100.2.3.1.5

List of temperature sensor entries.

irTempSensorEntry row .1.3.6.1.4.1.33.100.2.4.1

A temp sensor entry.

Indexes

irTempPortIndex irTempSensorIndex

Column	Syntax	OID
irTempPortIndex The port on which the temp sensor is configured.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.33.100.2.4.1.1
irTempSensorIndex A unique value that identifies a specific configured temp sensor.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.33.100.2.4.1.2
irTempValue The current temperature value.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.33.100.2.4.1.3
irTempValueUnits This object indicates the units for the temperature value.	Enumerationr/w Enumerated Values: 1 celsius 2 fahrenheit	.1.3.6.1.4.1.33.100.2.4.1.4
irTempThresholdHigh The high temperature threhsold value.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.33.100.2.4.1.5
irTempThresholdLow The low temperature threhsold value.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.33.100.2.4.1.6
irTempTrapSeverity The severity value to be sent in the threshold trap.	MRV-IR-SYSTEM-MIBTrapSeverityr/w Type Values: 1 cleared 2 informational 3 warning 4 minor 5 major 6 critical	.1.3.6.1.4.1.33.100.2.4.1.7
irTempHysteresis After crossing a threshold, the delta by which the caliberated value must drop within the normal range before the alarm condition is cleared (i.e. a cleared alarm is generated).	Integer32r/w Constraints: range: 0-10	.1.3.6.1.4.1.33.100.2.4.1.8

A list of humidity sensor entries.

irHumiditySensorEntry row .1.3.6.1.4.1.33.100.2.5.1

A humidity sensor entry.

Indexes

irHumidityPortIndex irHumiditySensorIndex

Column	Syntax	OID
irHumidityPortIndex The port on which the humidity sensor is configured.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.33.100.2.5.1.1
irHumiditySensorIndex A unique value that identifies a specific configured humidity sensor.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.33.100.2.5.1.2
irHumidityValue The current humidity value (as a percentage).	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.33.100.2.5.1.3
irHumidityThresholdHigh The high humidity threhsold value.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.33.100.2.5.1.4
irHumidityThresholdLow The low humidity threhsold value.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.33.100.2.5.1.5
irHumidityTrapSeverity The severity value to be sent in the threshold trap.	MRV-IR-SYSTEM-MIBTrapSeverityr/w Type Values: 1 cleared 2 informational 3 warning 4 minor 5 major 6 critical	.1.3.6.1.4.1.33.100.2.5.1.6
irHumidityHysteresis After crossing a threshold, the delta by which the caliberated value must drop within the normal range before the alarm condition is cleared (i.e. a cleared alarm is generated).	Integer32r/w Constraints: range: 0-10	.1.3.6.1.4.1.33.100.2.5.1.7

A list of power port entries.

irPowerEntry row .1.3.6.1.4.1.33.100.2.6.1

A power port config entry.

Indexes

No indexes recorded

Column	Syntax	OID
irPowerModuleType The type of power module attached to the power port.	Enumeration Enumerated Values: 1 module5150 2 module4800 3 module5250 4 moduleOther 5 module5210	.1.3.6.1.4.1.33.100.2.6.1.1
irPowerCurrentLoad An Ascii string indicating the total unit current load, in Amps.	OctetString Constraints: range: 0-8	.1.3.6.1.4.1.33.100.2.6.1.2
irPowerOutletCount The number of power outlets on the module.	Integer32 Constraints: range: 0-32	.1.3.6.1.4.1.33.100.2.6.1.4
irPowerCurrentLoadA An Ascii string indicating the current load, in Amps, of input feed A. Note that this info is available only on certain models. A value of 'N/A' indicates that this information is not available.	OctetString Constraints: range: 0-8	.1.3.6.1.4.1.33.100.2.6.1.5
irPowerCurrentLoadB An Ascii string indicating the current load, in Amps, of input feed B. Note that this info is available only on certain models. A value of 'N/A' indicates that this information is not available.	OctetString Constraints: range: 0-8	.1.3.6.1.4.1.33.100.2.6.1.6
irPowerCurrentLoadC An Ascii string indicating the current load, in Amps, of input feed C. Note that this info is available only on certain models. A value of 'N/A' indicates that this information is not available.	OctetString Constraints: range: 0-8	.1.3.6.1.4.1.33.100.2.6.1.7

A list of Power Outlet entries.

irPowerOutletEntry row .1.3.6.1.4.1.33.100.2.7.1

A power outlet entry.

Indexes

irPowerPortIndex irPowerOutletIndex

Column	Syntax	OID
irPowerPortIndex An index which uniquely identifies a physical power port.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.33.100.2.7.1.1
irPowerOutletIndex An index which uniquely identifies an outlet on a power outlet port.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.33.100.2.7.1.2
irPowerOutletName A name used to identify this power outlet.	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.33.100.2.7.1.3
irPowerOutletStatus The status of the power outlet.	Enumeration Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.33.100.2.7.1.4
irPowerOutletAction A read of this object always returns the value other(1). Setting it to one of the other values causes the corresponding action to take place.	Enumerationr/w Enumerated Values: 1 other 2 on 3 off 4 reboot	.1.3.6.1.4.1.33.100.2.7.1.5
irPowerOutletCurrentLoad An Ascii string indicating the current load, in Amps, for this outlet. A value of 'N/A' indicates that this information is not available.	OctetString Constraints: range: 0-8	.1.3.6.1.4.1.33.100.2.7.1.6

A list of TcpPipe port entries.

irTcpPipeEntry row .1.3.6.1.4.1.33.100.2.8.1

A TcpPipe port config entry.

Indexes

No indexes recorded

Column	Syntax	OID
irTcpPipeRemoteIpAddress The IP address of the remote end of the TCP connection.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.33.100.2.8.1.1
irTcpPipeRemoteTcpPort The TCP port number for the remote end of the TCP connection.	Integer32r/w Constraints: range: 2001-9999	.1.3.6.1.4.1.33.100.2.8.1.2
irTcpPipeWindowSize The TCP window size to use for the TCP connection.	Integer32r/w Constraints: range: 128-1400	.1.3.6.1.4.1.33.100.2.8.1.3
irTcpPipeConnRetryCount The TCP connection retry count to use for the TCP connection.	Integer32r/w Constraints: range: 0-60	.1.3.6.1.4.1.33.100.2.8.1.4
irTcpPipeConnStatus The TCP connection status.	Enumeration Enumerated Values: 0 idle 1 connecting 2 connected 3 suspended	.1.3.6.1.4.1.33.100.2.8.1.5

A list of modem config entries.

irModemCfgEntry row .1.3.6.1.4.1.33.100.2.9.1.1

A modem config entry.

Indexes

irModemIndex

Column	Syntax	OID
irModemIndex An index value that uniquely identifies a modem.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.33.100.2.9.1.1.1
irModemTimeout The number of seconds to wait to detect remote end setting DSR signal high before giving up trying to establish a call.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.33.100.2.9.1.1.2
irModemRetry The number of times to try establishing a call.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.33.100.2.9.1.1.3
irModemState This indicates whether the modem is enabled or disabled on a port.	Enumerationr/w Enumerated Values: 1 disabled 2 enabled	.1.3.6.1.4.1.33.100.2.9.1.1.4
irModemPooling This indicates whether modem pooling is enabled or disabled.	Enumerationr/w Enumerated Values: 1 disabled 2 enabled	.1.3.6.1.4.1.33.100.2.9.1.1.5
irModemDialNumber The phone number to dial when setting up a call.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.33.100.2.9.1.1.6
irModemInitString The modem initialisation string.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.33.100.2.9.1.1.7

A list of ldam alarm port config entries.

irLdAlarmConfigEntry row .1.3.6.1.4.1.33.100.2.10.1

An ldam alarm port config entry.

Indexes

irLdAlarmPortIndex irLdAlarmPointIndex

Column	Syntax	OID
irLdAlarmPortIndex The alarm port index.	Integer32 Constraints: range: 1-48	.1.3.6.1.4.1.33.100.2.10.1.1
irLdAlarmPointIndex An integer which uniquely identifies an alarm point on this port.	Integer32 Constraints: range: 1-2	.1.3.6.1.4.1.33.100.2.10.1.2
irLdAlarmName The name assigned to the alarm point.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.33.100.2.10.1.3
irLdAlarmDescription A user configurable alarm point description string.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.33.100.2.10.1.4
irLdAlarmContactState The current state of the alarm point contacts.	IrContactState Type Values: 1 open 2 closed	.1.3.6.1.4.1.33.100.2.10.1.5
irLdAlarmContactFaultState The contact state (open or closed) which indicates the fault condition. If the value of this object and irLdAlarmContactState is the same, then the alarm point has been triggered.	IrContactStater/w Type Values: 1 open 2 closed	.1.3.6.1.4.1.33.100.2.10.1.6
irLdAlarmTrapStatus This indicates whether an snmp trap will be generated when this alarm point is generated.	Enumerationr/w Enumerated Values: 1 disabled 2 enabled	.1.3.6.1.4.1.33.100.2.10.1.7
irLdAlarmTrapSeverity The trap severity assigned to this alarm point. This value will be sent when an alarm fires and an snmp trap is generated.	MRV-IR-SYSTEM-MIBTrapSeverityr/w Type Values: 1 cleared 2 informational 3 warning 4 minor 5 major 6 critical	.1.3.6.1.4.1.33.100.2.10.1.8
irLdAlarmCount The number of times the alarm point has been generated since the LX was started.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.33.100.2.10.1.9
irLdAlarmTimestamp A timestamp string indicating the time the last alarm was generated. A null string indicates that the alarm point has not been triggered.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.33.100.2.10.1.10

A list of ldam control port config entries.

irLdControlConfigEntry row .1.3.6.1.4.1.33.100.2.11.1

An ldam control port config entry.

Indexes

irLdControlPortIndex irLdControlPointIndex

Column	Syntax	OID
irLdControlPortIndex The control port index.	Integer32 Constraints: range: 1-48	.1.3.6.1.4.1.33.100.2.11.1.1
irLdControlPointIndex An integer which uniquely identifies a control point on this port.	Integer32 Constraints: range: 1-1	.1.3.6.1.4.1.33.100.2.11.1.2
irLdControlName The name assigned to the control point.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.33.100.2.11.1.3
irLdControlDescription A user configurable control point description string.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.33.100.2.11.1.4
irLdControlState The configured control state (deassert or assert).	IrControlStater/w Type Values: 1 deassert 2 assert	.1.3.6.1.4.1.33.100.2.11.1.5
irLdControlEnergizedState The configured energized state (deassert or assert). If the value of this object and irLdControlState is the same, then the operational state will be on.	IrControlStater/w Type Values: 1 deassert 2 assert	.1.3.6.1.4.1.33.100.2.11.1.6

A list of RS485 character port entries.

irRs485PortEntry row .1.3.6.1.4.1.33.100.2.12.1

An RS485 character port entry.

Indexes

irRs485PortIndex

Column	Syntax	OID
irRs485PortIndex An index value that uniquely identifies an RS485 port. This value maps to the same index in the irCharPortTable.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.33.100.2.12.1.1
irRs485PortDuplexMode The duplex mode for this RS485 port.	Enumerationr/w Enumerated Values: 1 full 2 half	.1.3.6.1.4.1.33.100.2.12.1.2
irRs485PortEchoMode The echo mode for this RS4585 port. This is used when irRs485PortDuplexMode object is set to half(2).	Enumerationr/w Enumerated Values: 1 disabled 2 enabled	.1.3.6.1.4.1.33.100.2.12.1.3
irRs485PortTransmitter The transmitter setting for this RS4585 port. This is used when irRs485PortDuplexMode object is set to full(1).	Enumerationr/w Enumerated Values: 1 always 2 rts	.1.3.6.1.4.1.33.100.2.12.1.4

A list of GSM/GPRS port entries.

irGsmPortEntry row .1.3.6.1.4.1.33.100.2.13.1

An GSM/GPRS port entry.

Indexes

irGsmPortIndex

Column	Syntax	OID
irGsmPortIndex An index value that uniquely identifies an GSM/GPRS port. This value maps to the same index in the irCharPortTable.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.33.100.2.13.1.1
irGsmPortRcvSigStrength The received signal strenth.	Integer32 Constraints: range: 0-31	.1.3.6.1.4.1.33.100.2.13.1.2
irGsmPortBitErrorRate The port bit error rate.	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.33.100.2.13.1.3

A list of ups entries.

irUpsEntry row .1.3.6.1.4.1.33.100.2.14.1

A ups entry.

Indexes

No indexes recorded

Column	Syntax	OID
irUpsType The ups type. It indicates the protocol used to communicate with the ups. A value of smart(1) means use Ascii based commands. A value of simple(2) means use RS232 signals (DTR, CTS). Note that, when irUpsType is simpl…	Enumerationr/w Enumerated Values: 1 smart 2 simple	.1.3.6.1.4.1.33.100.2.14.1.1
irUpsStatus The ups status. A value of offline(1) indicates the ups is not providing power to the attached devices. A value of online(2) indicates the ups is providing power to the attached devices.	Enumeration Enumerated Values: 1 offline 2 online	.1.3.6.1.4.1.33.100.2.14.1.2
irUpsModel The ups model.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.33.100.2.14.1.3
irUpsCharge The ups charge, as a percentage.	OctetString Constraints: range: 0-3	.1.3.6.1.4.1.33.100.2.14.1.4
irUpsLoad The current load, as a percentage.	OctetString Constraints: range: 0-3	.1.3.6.1.4.1.33.100.2.14.1.5
irUpsLife The ups life (time remaining), in minutes.	OctetString Constraints: range: 0-4	.1.3.6.1.4.1.33.100.2.14.1.6