MPRTMPLS Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
9
Rows
9
Columns
69

mplsIfConfigTable

table
.1.3.6.1.4.1.5651.6.2.1.1.2 · 1 row entry · 2 columns
Open in standard view
Uses the maipu variant from /opt/observium/mibs/maipu.
Command help
Walk mplsIfConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MPRTMPLS' -M '/opt/observium/mibs/maipu:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MPRTMPLS::mplsIfConfigTable'
mplsIfConfigEntry row .1.3.6.1.4.1.5651.6.2.1.1.2.1
Indexes
Column Syntax OID
ifConfigTableIfIndex
interface index
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.5651.6.2.1.1.2.1.1
ifConfigTableRowStatus
 SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.5651.6.2.1.1.2.1.3

mplsL2VpnInfoTable

table
.1.3.6.1.4.1.5651.6.2.1.2.1 · 1 row entry · 3 columns
Open in standard view
Uses the maipu variant from /opt/observium/mibs/maipu.
Command help
Walk mplsL2VpnInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MPRTMPLS' -M '/opt/observium/mibs/maipu:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MPRTMPLS::mplsL2VpnInfoTable'
mplsL2VpnInfoEntry row .1.3.6.1.4.1.5651.6.2.1.2.1.1
Indexes
Column Syntax OID
l2VpnInfoTableVpnId
??PE???ֹ????õ?VPN??ʶ??????Martini??˵??VC-ID??????VPLS??˵??VPN-ID??
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5651.6.2.1.2.1.1.1
l2VpnInfoTableAcIfIndex
AC?ӿ??????š?
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.5651.6.2.1.2.1.1.3
l2VpnInfoTableAcIfName
AC?ӿ????ơ?
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.5651.6.2.1.2.1.1.4

mplsL2VpnPWTable

table
.1.3.6.1.4.1.5651.6.2.1.2.2 · 1 row entry · 7 columns
Open in standard view
Uses the maipu variant from /opt/observium/mibs/maipu.
Command help
Walk mplsL2VpnPWTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MPRTMPLS' -M '/opt/observium/mibs/maipu:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MPRTMPLS::mplsL2VpnPWTable'
mplsL2VpnPWEntry row .1.3.6.1.4.1.5651.6.2.1.2.2.1
Indexes
Column Syntax OID
l2VpnPWTableVpnId
??PE???ֹ????õ?VPN??ʶ??????Martini??˵??VC-ID??????VPLS??˵??VPN-ID??
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5651.6.2.1.2.2.1.1
l2VpnPWTablePeerAddress
?Զ?PE??IP??ַ??
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.5651.6.2.1.2.2.1.3
l2VpnPWTableIfIndex
????PE????PW?Ľӿڡ?
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.5651.6.2.1.2.2.1.4
l2VpnPWTableFlowInKBytes
?????ֽ?????
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5651.6.2.1.2.2.1.7
l2VpnPWTableFlowOutBytes
?????ֽ?????
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5651.6.2.1.2.2.1.8
l2VpnPWTableFlowInPackets
???뱨??????
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5651.6.2.1.2.2.1.9
l2VpnPWTableFlowOutPackets
????????????
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5651.6.2.1.2.2.1.10

mplsL3VpnVrfFlowInfoTable

table
.1.3.6.1.4.1.5651.6.2.1.3.1 · 1 row entry · 6 columns
Open in standard view
Uses the maipu variant from /opt/observium/mibs/maipu.
Command help
Walk mplsL3VpnVrfFlowInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MPRTMPLS' -M '/opt/observium/mibs/maipu:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MPRTMPLS::mplsL3VpnVrfFlowInfoTable' 
Flow statistics of VPN Routing/Forwarding instance
mplsL3VpnVrfFlowInfoEntry row .1.3.6.1.4.1.5651.6.2.1.3.1.1
Flow statistics of VPN Routing/Forwarding instance
Indexes
Column Syntax OID
l3VpnVrfFlowInfoTableVrfName
name of VPN Routing/Forwarding instance
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.5651.6.2.1.3.1.1.1
l3VpnVrfFlowInfoTablePeerAddress
IP address of remote PE.(this is reserved for the statistics of out-flow to specific destination PE,it should be set to 0.0.0.0 when it is not used)
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.5651.6.2.1.3.1.1.2
l3VpnVrfFlowInfoTableFlowInBytes
The total number of bytes that the specific VRF received from MPLS network
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5651.6.2.1.3.1.1.3
l3VpnVrfFlowInfoTableFlowInPackets
The total number of packets that the specific VRF received from MPLS network
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5651.6.2.1.3.1.1.4
l3VpnVrfFlowInfoTableFlowOutBytes
The total number of bytes transmitted out of the specific VRF to MPLS network
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5651.6.2.1.3.1.1.5
l3VpnVrfFlowInfoTableFlowOutPackets
The total number of packets transmitted out of the specific VRF to MPLS network
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5651.6.2.1.3.1.1.6

mplsL2VpnOAMTable

table
.1.3.6.1.4.1.5651.6.2.1.5.2 · 1 row entry · 6 columns
Open in standard view
Uses the maipu variant from /opt/observium/mibs/maipu.
Command help
Walk mplsL2VpnOAMTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MPRTMPLS' -M '/opt/observium/mibs/maipu:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MPRTMPLS::mplsL2VpnOAMTable'
mplsL2VpnOAMEntry row .1.3.6.1.4.1.5651.6.2.1.5.2.1
Indexes
Column Syntax OID
l2VpnOAMTableEntityId
Index
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5651.6.2.1.5.2.1.1
l2VpnOAMTableVpnId
VPN ID
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.5651.6.2.1.5.2.1.2
l2VpnOAMTablePeerAddress
IP address of remote PE.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.5651.6.2.1.5.2.1.4
l2VpnOAMTableDelay
Time delay:negative indicates the failue of detecting,and positive indicates the value of time delay.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.5651.6.2.1.5.2.1.5
l2VpnOAMTableLose
The total number of loss packet:negative indicates the failue of detecting,and positive indicates the number of loss packet.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.5651.6.2.1.5.2.1.6
l2VpnOAMTableStatus
The cause of the detecting failue,meaningful only when failue is occured.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.5651.6.2.1.5.2.1.7

mplsL3VpnOAMTable

table
.1.3.6.1.4.1.5651.6.2.1.5.3 · 1 row entry · 15 columns
Open in standard view
Uses the maipu variant from /opt/observium/mibs/maipu.
Command help
Walk mplsL3VpnOAMTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MPRTMPLS' -M '/opt/observium/mibs/maipu:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MPRTMPLS::mplsL3VpnOAMTable'
mplsL3VpnOAMEntry row .1.3.6.1.4.1.5651.6.2.1.5.3.1
Indexes
Column Syntax OID
l3VpnOAMTableEntityId
Index
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5651.6.2.1.5.3.1.1
l3VpnOAMTableVrfName
Name of VRF
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.5651.6.2.1.5.3.1.2
l3VpnOAMTablePeerDetectAddress
IP address of targeted PE.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.5651.6.2.1.5.3.1.3
l3VpnOAMTablePeerDetectAddressMask
IP address mask of targeted PE.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.5651.6.2.1.5.3.1.4
l3VpnOAMTableCount
The specified count of MPLS echo request packets which will be sent at once.(default:5)
Integer32r/w
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.5651.6.2.1.5.3.1.5
l3VpnOAMTableSize
The specified size of MPLS echo request packet.(unit:byte,default:120)
Integer32r/w
Constraints:
range: 120-18024
 .1.3.6.1.4.1.5651.6.2.1.5.3.1.6
l3VpnOAMTableInterval
The specified interval of sending MPLS echo request.(unit:ms,default:0)
Integer32r/w
Constraints:
range: 0-1000
 .1.3.6.1.4.1.5651.6.2.1.5.3.1.7
l3VpnOAMTableTimeout
MPLS echo reply timeout in seconds.(default:2)
Integer32r/w
Constraints:
range: 1-3600
 .1.3.6.1.4.1.5651.6.2.1.5.3.1.8
l3VpnOAMTableTtl
The specified TTL of MPLS echo request.(default:255)
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.5651.6.2.1.5.3.1.9
l3VpnOAMTableExp
The specified MPLS experimental field value in the MPLS header for an MPLS echo reply.(default:0)
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.5651.6.2.1.5.3.1.10
l3VpnOAMTableSentCount
The total number of MPLS echo request packets which have been sent.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.5651.6.2.1.5.3.1.11
l3VpnOAMTableSuccessCount
The total number of MPLS echo request packets which have been response by echo reply successfully.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.5651.6.2.1.5.3.1.12
l3VpnOAMTableDelay
The average time delay.(unit:ms)
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.5651.6.2.1.5.3.1.13
l3VpnOAMTableStatus
Status of each MPLS ping entity:
1:detecting;
2:detectSuccess;(The definition of success:one of the MPLS echo request packets has been response by echo reply successfully)
3:detectFailure;(The definition of failure:all …
Enumeration
Enumerated Values:
1detecting
2detectSuccess
3detectFailure
 .1.3.6.1.4.1.5651.6.2.1.5.3.1.14
l3VpnOAMTableRowStatus
Status of this row.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.5651.6.2.1.5.3.1.15

mplsL3VpnTraceCtlTable

table
.1.3.6.1.4.1.5651.6.2.1.5.4 · 1 row entry · 9 columns
Open in standard view
Uses the maipu variant from /opt/observium/mibs/maipu.
Command help
Walk mplsL3VpnTraceCtlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MPRTMPLS' -M '/opt/observium/mibs/maipu:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MPRTMPLS::mplsL3VpnTraceCtlTable' 
The control table of MPLS L3VPN traceroute,for the use of setting arguments of MPLS traceroute.
mplsL3VpnTraceCtlEntry row .1.3.6.1.4.1.5651.6.2.1.5.4.1
The control table of MPLS L3VPN traceroute,for the use of setting arguments of MPLS traceroute.
Indexes
Column Syntax OID
l3VpnTraceCtlEntityId
The entity ID of MPLS traceroute,which is the index of table.The entity ID should be taken before start MPLS traceroute.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5651.6.2.1.5.4.1.1
l3VpnTraceCtlVrfName
VRF name.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 1-255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.5651.6.2.1.5.4.1.2
l3VpnTraceCtlDestinationPeAddress
IP address of destination PE.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.5651.6.2.1.5.4.1.3
l3VpnTraceCtlDestinationPeAddressMaskLen
The IP address mask length of destination PE.
Integer32r/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.5651.6.2.1.5.4.1.4
l3VpnTraceCtlTimeOut
MPLS traceroute echo reply timeout in seconds.(default:2)
Integer32r/w
Constraints:
range: 1-3600
 .1.3.6.1.4.1.5651.6.2.1.5.4.1.5
l3VpnTraceCtlMaxTtl
The specified maximum hop count.(default:30)
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.5651.6.2.1.5.4.1.6
l3VpnTraceCtlExp
The specified MPLS experimental field value in the MPLS header for an MPLS echo reply.(default:0)
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.5651.6.2.1.5.4.1.7
l3VpnTraceCtlErrorCode
error code of LSP traceroute:
1: wrong entity ID;
2: entity ID is up to max;
3: entity ID is used;
4: memory short;
5: wrong vrf name;
6: wrong mask length;
7: wrong timeout value;
8: wrong ttl value;
9: wrong exp value…
Enumeration
Enumerated Values:
1wrong_entity_ID
2entity_ID_is_up_to_max
3entity_ID_is_used
4memory_short
5wrong_vrf_name
6wrong_mask_length
7wrong_timeout_value
8wrong_ttl_value
9wrong_exp_value
10parameters_missed
 .1.3.6.1.4.1.5651.6.2.1.5.4.1.8
l3VpnTraceCtlRowStatus
MPLS traceroute row status.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.5651.6.2.1.5.4.1.9

mplsl3VpnTraceResultsTable

table
.1.3.6.1.4.1.5651.6.2.1.5.5 · 1 row entry · 18 columns
Open in standard view
Uses the maipu variant from /opt/observium/mibs/maipu.
Command help
Walk mplsl3VpnTraceResultsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MPRTMPLS' -M '/opt/observium/mibs/maipu:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MPRTMPLS::mplsl3VpnTraceResultsTable' 
The results table of MPLS L3VPN traceroute,for the use of returning results of MPLS traceroute.
mplsl3VpnTraceResultsEntry row .1.3.6.1.4.1.5651.6.2.1.5.5.1
The results table of MPLS L3VPN traceroute,for the use of returning results of MPLS traceroute.
Indexes
Column Syntax OID
l3VpnTraceResultsEntityId
The entity ID of MPLS traceroute,corresponding to the entity ID in mplsL3VpnTraceCtlTable.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5651.6.2.1.5.5.1.1
l3VpnTraceResultsTtlIndex
The TTL in outermost lable of each echo request which has been sent,it is one of the indices.(The TTL of the initial PE is 0)
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.5651.6.2.1.5.5.1.2
l3VpnTraceResultsResultCode
The result code of one MPLS traceroute process:
skip display(1)
success(2)
request not transmitted(3)
timeout(4)
unreachable(5)
downstream router but not destination(6)
malformed request(7)
malformed reply(8)
Enumeration
Enumerated Values:
-1skipDisplay
0success
1requestNotTransmitted
2timeout
3unreachable
4downstreamRouterButNotDestination
5malformedRequest
6malformedReply
 .1.3.6.1.4.1.5651.6.2.1.5.5.1.3
l3VpnTraceResultsHopAddress
IP address of one hop on the path(0.0.0.0 indicate that the IP address should not be shown)
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.5651.6.2.1.5.5.1.4
l3VpnTraceResultsHopMtu
The interface MTU of one hop on the path.(unit:byte,-1 indicate that the interface MTU should not be shown)
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.5651.6.2.1.5.5.1.5
l3VpnTraceResultsHopLableCount
The total count of lables in lablestack which a certain hop will use.(0 indicate that the label count and the following lable value&exp should not be shown)
Integer32
Constraints:
range: 0-5
 .1.3.6.1.4.1.5651.6.2.1.5.5.1.6
l3VpnTraceResultsHopLableValue1
The lable value of first lable.(outermost)
Integer32
Constraints:
range: 0-1048575
 .1.3.6.1.4.1.5651.6.2.1.5.5.1.7
l3VpnTraceResultsHopLableExp1
The lable exp of first lable.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.5651.6.2.1.5.5.1.8
l3VpnTraceResultsHopLableValue2
The lable value of second lable.
Integer32
Constraints:
range: 0-1048575
 .1.3.6.1.4.1.5651.6.2.1.5.5.1.9
l3VpnTraceResultsHopLableExp2
The lable exp of second lable.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.5651.6.2.1.5.5.1.10
l3VpnTraceResultsHopLableValue3
The lable value of third lable.
Integer32
Constraints:
range: 0-1048575
 .1.3.6.1.4.1.5651.6.2.1.5.5.1.11
l3VpnTraceResultsHopLableExp3
The lable exp of third lable.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.5651.6.2.1.5.5.1.12
l3VpnTraceResultsHopLableValue4
The lable value of fourth lable.
Integer32
Constraints:
range: 0-1048575
 .1.3.6.1.4.1.5651.6.2.1.5.5.1.13
l3VpnTraceResultsHopLableExp4
The lable exp of fourth lable.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.5651.6.2.1.5.5.1.14
l3VpnTraceResultsHopLableValue5
The lable value of fifth lable.(innermost)
Integer32
Constraints:
range: 0-1048575
 .1.3.6.1.4.1.5651.6.2.1.5.5.1.15
l3VpnTraceResultsHopLableExp5
The lable exp of fifth lable.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.5651.6.2.1.5.5.1.16
l3VpnTraceResultsHopRtt
The Round Trip Time of certain hop's echo packet.(unit:ms,-1 indicate that the RTT should not be shown)
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.5651.6.2.1.5.5.1.17
l3VpnTraceResultsStatus
Status of each MPLS traceroute entity:
traceroute is in progress(1)
traceroute has finished(2)
Enumeration
Enumerated Values:
1tracerouteIsInProgress
2tracerouteHasFinished
 .1.3.6.1.4.1.5651.6.2.1.5.5.1.18

mpLDPIfTable

table
.1.3.6.1.4.1.5651.6.2.1.6.4 · 1 row entry · 3 columns
Open in standard view
Uses the maipu variant from /opt/observium/mibs/maipu.
Command help
Walk mpLDPIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MPRTMPLS' -M '/opt/observium/mibs/maipu:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MPRTMPLS::mpLDPIfTable' 
ldp interface information table.
mpLDPIfEntry row .1.3.6.1.4.1.5651.6.2.1.6.4.1
ldp interface information table.
Indexes
Column Syntax OID
mpLDPIfIndex
ldp interface index.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.5651.6.2.1.6.4.1.1
mpLDPIfEnable
enable or disable ldp on interface.
1 enable
2 disable
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.5651.6.2.1.6.4.1.2
mpLDPIfRowstatus
ldp interface rowstatus.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.5651.6.2.1.6.4.1.3