MPRIP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
5
Rows
5
Columns
27

ripNetworkTable

table
.1.3.6.1.4.1.5651.3.11.2.1 · 1 row entry · 2 columns
Open in standard view
Uses the maipu variant from /opt/observium/mibs/maipu.
Command help
Walk ripNetworkTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MPRIP-MIB' -M '/opt/observium/mibs/maipu:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MPRIP-MIB::ripNetworkTable' 
The valid RIP Networks.
ripNetworkEntry row .1.3.6.1.4.1.5651.3.11.2.1.1
Single Network in the Rip Global Configuration.
Indexes
Column Syntax OID
ripNetworkNum
The network-number corresponding with rip at the Router interfaces.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.5651.3.11.2.1.1.1
ripNetworkStatus
Writing invalid has the effect of deleting
this interface.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.5651.3.11.2.1.1.2

ripNeighborTable

table
.1.3.6.1.4.1.5651.3.11.2.2 · 1 row entry · 2 columns
Open in standard view
Uses the maipu variant from /opt/observium/mibs/maipu.
Command help
Walk ripNeighborTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MPRIP-MIB' -M '/opt/observium/mibs/maipu:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MPRIP-MIB::ripNeighborTable' 
Specify the list of neighbor routers.
ripNeighborEntry row .1.3.6.1.4.1.5651.3.11.2.2.1
Single neighbor router in the list.
Indexes
Column Syntax OID
ripNeighborAddr
Address of neighbor router of this router.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.5651.3.11.2.2.1.1
ripNeighborStatus
Writing invalid has the effect of deleting
this interface.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.5651.3.11.2.2.1.2

ripRedisIrmpTable

table
.1.3.6.1.4.1.5651.3.11.2.3 · 1 row entry · 3 columns
Open in standard view
Uses the maipu variant from /opt/observium/mibs/maipu.
Command help
Walk ripRedisIrmpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MPRIP-MIB' -M '/opt/observium/mibs/maipu:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MPRIP-MIB::ripRedisIrmpTable' 
RIP?طַ?IRMP??.
ripRedisIrmpEntry row .1.3.6.1.4.1.5651.3.11.2.3.1
Single neighbor router in the list.
Indexes
Column Syntax OID
ripRedisIrmpAutoNo
RIP?طַ?IRMP???κ?.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.5651.3.11.2.3.1.1
ripRedisIrmpMetric
RIP?طַ?IRMP????ֵ.
Integer32r/w
Constraints:
range: 1-15
 .1.3.6.1.4.1.5651.3.11.2.3.1.2
ripRedisIrmpStatus
RIP?طַ?IRMP????״̬.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.5651.3.11.2.3.1.3

ripIfStatTable

table
.1.3.6.1.4.1.5651.3.11.3.1 · 1 row entry · 11 columns
Open in standard view
Uses the maipu variant from /opt/observium/mibs/maipu.
Command help
Walk ripIfStatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MPRIP-MIB' -M '/opt/observium/mibs/maipu:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MPRIP-MIB::ripIfStatTable' 
A list of subnets which require separate
status monitoring in rip.
ripIfStatEntry row .1.3.6.1.4.1.5651.3.11.3.1.1
A single Routing Domain in a single Subnet.
Indexes
Column Syntax OID
ripIfStatIndex
The Index of the router interfaces, to index the list of
ripIfStatTable.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5651.3.11.3.1.1.1
ripIfStatType
The Type of the router interfaces.
Enumeration
Enumerated Values:
1point-to-point
2lookback
3broadcast
 .1.3.6.1.4.1.5651.3.11.3.1.1.2
ripIfStatStatus
The status of the router interfaces.
Enumeration
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.5651.3.11.3.1.1.3
ripIfStatLocalAddr
The local IP address of the router interfaces.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.5651.3.11.3.1.1.4
ripIfStatRemoteAddr
The local IP address of the router interfaces.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.5651.3.11.3.1.1.5
ripIfStatUniqueAddr
The local IP address of the router interfaces.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.5651.3.11.3.1.1.6
ripIfStatRecvBadPkts
The number of rip response packets received by
the rip process which were subsequently discarded
for any reason (e.g. a version 0 packet, or an
unknown command type).
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5651.3.11.3.1.1.7
ripIfStatRecvBadRoutes
The number of routes, in valid rip packets,
which were ignored for any reason (e.g. unknown
address family, or invalid metric).
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5651.3.11.3.1.1.8
ripIfStatRecvPkts
The number of rip response packets received by
the rip process.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5651.3.11.3.1.1.9
ripIfStatSendPkts
The number of routes, in valid rip packets.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5651.3.11.3.1.1.10
ripIfStatSendErrors
The error number of rip response packets send by
the rip process.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5651.3.11.3.1.1.11

ripIfConfTable

table
.1.3.6.1.4.1.5651.3.11.3.2 · 1 row entry · 9 columns
Open in standard view
Uses the maipu variant from /opt/observium/mibs/maipu.
Command help
Walk ripIfConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MPRIP-MIB' -M '/opt/observium/mibs/maipu:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MPRIP-MIB::ripIfConfTable' 
A list of subnets which require separate
configuration in rip.
ripIfConfEntry row .1.3.6.1.4.1.5651.3.11.3.2.1
A Single Routing Domain in a single Subnet.
Indexes
Column Syntax OID
ripIfConfIndex
The index of the router interfaces, to index the list of
ripIfConfTable.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5651.3.11.3.2.1.1
ripIfConfIp
The IP address of the interface.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.5651.3.11.3.2.1.2
ripIfConfPassive
Boolean Value to Suppress routing updates on the
indecated interface
Enumerationr/w
Enumerated Values:
1suppress
2noSuppress
 .1.3.6.1.4.1.5651.3.11.3.2.1.3
ripIfConfAuthMode
The type of Authentication used on this
interface.
Enumerationr/w
Enumerated Values:
1noAuthentication
2simplePassword
3md5
 .1.3.6.1.4.1.5651.3.11.3.2.1.4
ripIfConfAuthKey
The type of Authentication used on this
interface.
Enumerationr/w
Enumerated Values:
1noEncrypt
2encrypt
 .1.3.6.1.4.1.5651.3.11.3.2.1.5
ripIfConfAuthPwd
The value to be used as the Authentication Key
whenever the corresponding instance of
rip2IfConfAuthType has a value other than
noAuthentication. A modification of the corresponding
instance of ripIfConfAuthMode does n…
OctetStringr/w .1.3.6.1.4.1.5651.3.11.3.2.1.6
ripIfConfRecvVer
This indicates which version of rip updates
are to be accepted. Note that rip2 and
rip1Orrip2 implies reception of multicast
packets.
Enumerationr/w
Enumerated Values:
1rip1
2rip2
3rip1Orrip2
 .1.3.6.1.4.1.5651.3.11.3.2.1.7
ripIfConfSendVer
What the router sends on this interface.
ripVersion1 implies sending rip updates compliant
with RFC 1058. ripVersion2 implies
multicasting rip-2 updates.
Enumerationr/w
Enumerated Values:
1rip1
2rip2
3rip1Orrip2
4ripNoSend
 .1.3.6.1.4.1.5651.3.11.3.2.1.8
ripIfConfStatus
RIP?ӿ???????״̬.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.5651.3.11.3.2.1.9