MPLS-TE-MIB

This MIB module contains managed object definitions
for MPLS Traffic Engineering (TE) as defined in:
Extensions to RSVP for LSP Tunnels, Awduche et al,
Internet Draft ,
March 1999; Constraint-Based LSP Setup using LDP, B.
Jamoussi, Internet Draft , Feb. 1999; Requirements for Traffic
Engineering Over MPLS, Awduche, D., J. Malcolm, J.,
Agogbua, J., O'Dell, M., J. McManus, ,
September 1999.

Imported Objects

InterfaceIndexOrZeroIF-MIB
InetAddressIPv6, InetAddressIPv4INET-ADDRESS-MIB
NOTIFICATION-GROUP, OBJECT-GROUP, MODULE-COMPLIANCESNMPv2-CONF
Unsigned32, Integer32, experimental, MODULE-IDENTITY, IpAddress, NOTIFICATION-TYPE, OBJECT-TYPESNMPv2-SMI
TEXTUAL-CONVENTION, TruthValue, RowStatus, RowPointer, StorageType, DisplayStringSNMPv2-TC

Type Definitions (4)

Name Base Type Values/Constraints
MplsBitRateInteger32range: 1..2147483647
MplsBurstSizeInteger32range: 1..2147483647
MplsLSPIDOctetStringrange: 0..31
MplsTunnelIndexInteger32range: 0..65535

Objects

mplsTeMIB .1.3.6.1.3.95
mplsTeObjects .1.3.6.1.3.95.1
mplsTunnelIndexNext .1.3.6.1.3.95.1.1
mplsTunnelTable .1.3.6.1.3.95.1.2
mplsTunnelEntry .1.3.6.1.3.95.1.2.1
mplsTunnelIndex .1.3.6.1.3.95.1.2.1.1
mplsTunnelSetupPrio .1.3.6.1.3.95.1.2.1.10
mplsTunnelHoldingPrio .1.3.6.1.3.95.1.2.1.11
mplsTunnelSessionAttributes .1.3.6.1.3.95.1.2.1.12
mplsTunnelOwner .1.3.6.1.3.95.1.2.1.13
mplsTunnelLocalProtectInUse
.1.3.6.1.3.95.1.2.1.14
mplsTunnelResourcePointer
.1.3.6.1.3.95.1.2.1.15
mplsTunnelInstancePriority .1.3.6.1.3.95.1.2.1.16
mplsTunnelHopTableIndex .1.3.6.1.3.95.1.2.1.17
mplsTunnelARHopTableIndex .1.3.6.1.3.95.1.2.1.18
mplsTunnelAdminStatus .1.3.6.1.3.95.1.2.1.19
mplsTunnelInstance .1.3.6.1.3.95.1.2.1.2
mplsTunnelOperStatus .1.3.6.1.3.95.1.2.1.20
mplsTunnelRowStatus
.1.3.6.1.3.95.1.2.1.21
mplsTunnelStorageType
.1.3.6.1.3.95.1.2.1.22
mplsTunnelIngressLSRId .1.3.6.1.3.95.1.2.1.3
mplsTunnelName
.1.3.6.1.3.95.1.2.1.4
mplsTunnelDescr
.1.3.6.1.3.95.1.2.1.5
mplsTunnelIsIf
.1.3.6.1.3.95.1.2.1.6
mplsTunnelIfIndex
.1.3.6.1.3.95.1.2.1.7
mplsTunnelXCPointer
.1.3.6.1.3.95.1.2.1.8
mplsTunnelSignallingProto .1.3.6.1.3.95.1.2.1.9
mplsTunnelMaxHops .1.3.6.1.3.95.1.3
mplsTunnelHopIndexNext .1.3.6.1.3.95.1.4
mplsTunnelHopTable .1.3.6.1.3.95.1.5
mplsTunnelHopEntry .1.3.6.1.3.95.1.5.1
mplsTunnelHopListIndex .1.3.6.1.3.95.1.5.1.1
mplsTunnelHopStrictOrLoose .1.3.6.1.3.95.1.5.1.10
mplsTunnelHopRowStatus
.1.3.6.1.3.95.1.5.1.11
mplsTunnelHopStorageType
.1.3.6.1.3.95.1.5.1.12
mplsTunnelHopIndex .1.3.6.1.3.95.1.5.1.2
mplsTunnelHopAddrType .1.3.6.1.3.95.1.5.1.3
mplsTunnelHopIpv4Addr
.1.3.6.1.3.95.1.5.1.4
mplsTunnelHopIpv4PrefixLen .1.3.6.1.3.95.1.5.1.5
mplsTunnelHopIpv6Addr
.1.3.6.1.3.95.1.5.1.6
mplsTunnelHopIpv6PrefixLen .1.3.6.1.3.95.1.5.1.7
mplsTunnelHopAsNumber .1.3.6.1.3.95.1.5.1.8
mplsTunnelHopLspId .1.3.6.1.3.95.1.5.1.9
mplsTunnelResourceIndexNext .1.3.6.1.3.95.1.6
mplsTunnelResourceTable .1.3.6.1.3.95.1.7
mplsTunnelResourceEntry .1.3.6.1.3.95.1.7.1
mplsTunnelResourceIndex .1.3.6.1.3.95.1.7.1.1
mplsTunnelResourceMaxRate .1.3.6.1.3.95.1.7.1.2
mplsTunnelResourceMeanRate .1.3.6.1.3.95.1.7.1.3
mplsTunnelResourceMaxBurstSize .1.3.6.1.3.95.1.7.1.4
mplsTunnelResourceRowStatus
.1.3.6.1.3.95.1.7.1.5
mplsTunnelResourceStorageType
.1.3.6.1.3.95.1.7.1.6
mplsTunnelARHopTable .1.3.6.1.3.95.1.8
mplsTunnelARHopEntry .1.3.6.1.3.95.1.8.1
mplsTunnelARHopListIndex .1.3.6.1.3.95.1.8.1.1
mplsTunnelARHopIndex .1.3.6.1.3.95.1.8.1.2
mplsTunnelARHopAddrType .1.3.6.1.3.95.1.8.1.3
mplsTunnelARHopIpv4Addr
.1.3.6.1.3.95.1.8.1.4
mplsTunnelARHopIpv4PrefixLen .1.3.6.1.3.95.1.8.1.5
mplsTunnelARHopIpv6Addr
.1.3.6.1.3.95.1.8.1.6
mplsTunnelARHopIpv6PrefixLen .1.3.6.1.3.95.1.8.1.7
mplsTunnelARHopAsNumber .1.3.6.1.3.95.1.8.1.8
mplsTunnelARHopStrictOrLoose .1.3.6.1.3.95.1.8.1.9
mplsTunnelTrapEnable
.1.3.6.1.3.95.1.9
mplsTeNotifications .1.3.6.1.3.95.2
mplsTeNotifyPrefix .1.3.6.1.3.95.2.0
mplsTeConformance .1.3.6.1.3.95.3
mplsTeGroups .1.3.6.1.3.95.3.1
mplsTeCompliances .1.3.6.1.3.95.3.2

Notifications/Traps

NameOIDDescription
mplsTunnelUp




.1.3.6.1.3.95.2.0.1
ication is generated when a
mplsTunnelOperStatus object for one of the
configured tunnels is about to leave the down state
and transition into some other state (but not into
the notPresent state).  This other state is
indicated by the included value of
mplsTunnelOperStatus.
mplsTunnelDown




.1.3.6.1.3.95.2.0.2
ication is generated when a
mplsTunnelOperStatus object for one of the
configured tunnels is about to enter the down state
from some other state (but not from the notPresent
state).  This other state is indicated by the
included value of mplsTunnelOperStatus.
mplsTunnelRerouted




.1.3.6.1.3.95.2.0.3
ication is generated when a tunnel is
rerouted or re-optimized. If the Actual Path is
used, then this object MAY contain the new path for
this tunnel some time after this trap is issued by
the agent.
mplsTunnelReoptimized





.1.3.6.1.3.95.2.0.4
ication is generated when a tunnel is
reoptimized. If the actual path is used, then this
object MAY contain the new path for this tunnel
some time after this trap is issued by the agent.