MPLS-TE-EXT-STD-MIB
This MIB module contains generic object definitions for
extending the MPLS Traffic Engineering tunnels in transport
networks.
Copyright (c) 2015 IETF Trust and the persons identified as
authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with or
without modification, is permitted pursuant to, and subject to
the license terms contained in, the Simplified BSD License set
forth in Section 4.c of the IETF Trust's Legal Provisions
Relating to IETF Documents
(http://trustee.ietf.org/license-info).
- Source file
MPLS-TE-EXT-STD-MIB- Last revised
- Identity
mplsTeExtStdMIB- Base OID
1.3.6.1.2.1.10.166.20
Imported Objects
| DIFFSERV-MIB | IndexIntegerNextFree |
| MPLS-TC-EXT-STD-MIB | MplsCcId MplsGlobalId MplsIccId MplsNodeId |
| MPLS-TC-STD-MIB | MplsExtendedTunnelId mplsStdMIB MplsTunnelIndex MplsTunnelInstanceIndex |
| MPLS-TE-STD-MIB | mplsTunnelEgressLSRId mplsTunnelIndex mplsTunnelIngressLSRId mplsTunnelInstance |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) |
| SNMPv2-TC | RowPointer RowStatus StorageType TruthValue |
Net-SNMP examples using the rfc MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'MPLS-TE-EXT-STD-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'MPLS-TE-EXT-STD-MIB::mplsTeExtStdMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MPLS-TE-EXT-STD-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MPLS-TE-EXT-STD-MIB::mplsTeExtStdMIB'
Objects (36)
Showing 36 of 36 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.2.1.10.166.20 |
||
.1.3.6.1.2.1.10.166.20.0 |
||
|
Unsigned32
|
.1.3.6.1.2.1.10.166.20.0.1 |
|
.1.3.6.1.2.1.10.166.20.0.2 |
||
.1.3.6.1.2.1.10.166.20.0.2.1 |
||
.1.3.6.1.2.1.10.166.20.0.2.1.1 |
||
.1.3.6.1.2.1.10.166.20.0.2.1.2 |
||
.1.3.6.1.2.1.10.166.20.0.2.1.3 |
||
.1.3.6.1.2.1.10.166.20.0.2.1.4 |
||
.1.3.6.1.2.1.10.166.20.0.2.1.5 |
||
.1.3.6.1.2.1.10.166.20.0.2.1.6 |
||
.1.3.6.1.2.1.10.166.20.0.2.1.7 |
||
.1.3.6.1.2.1.10.166.20.0.2.1.8 |
||
.1.3.6.1.2.1.10.166.20.0.3 |
||
.1.3.6.1.2.1.10.166.20.0.3.1 |
||
.1.3.6.1.2.1.10.166.20.0.3.1.1 |
||
.1.3.6.1.2.1.10.166.20.0.3.1.2 |
||
.1.3.6.1.2.1.10.166.20.0.3.1.3 |
||
.1.3.6.1.2.1.10.166.20.0.4 |
||
.1.3.6.1.2.1.10.166.20.0.4.1 |
||
.1.3.6.1.2.1.10.166.20.0.4.1.1 |
||
.1.3.6.1.2.1.10.166.20.0.4.1.2 |
||
.1.3.6.1.2.1.10.166.20.0.4.1.3 |
||
.1.3.6.1.2.1.10.166.20.0.4.1.4 |
||
.1.3.6.1.2.1.10.166.20.0.5 |
||
.1.3.6.1.2.1.10.166.20.0.5.1 |
||
.1.3.6.1.2.1.10.166.20.0.5.1.1 |
||
.1.3.6.1.2.1.10.166.20.0.5.1.2 |
||
.1.3.6.1.2.1.10.166.20.0.5.1.3 |
||
.1.3.6.1.2.1.10.166.20.0.5.1.4 |
||
.1.3.6.1.2.1.10.166.20.0.5.1.5 |
||
.1.3.6.1.2.1.10.166.20.0.5.1.6 |
||
.1.3.6.1.2.1.10.166.20.0.5.1.7 |
||
.1.3.6.1.2.1.10.166.20.1 |
||
.1.3.6.1.2.1.10.166.20.1.1 |
||
.1.3.6.1.2.1.10.166.20.1.2 |
Dependencies (14) 7 direct · 7 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
Conformance Groups (3)
Compliance Statements (2)
OID
.1.3.6.1.2.1.10.166.20.1.1.1Compliance statement for agents that provide full
support the MPLS-TE-EXT-STD-MIB module.
support the MPLS-TE-EXT-STD-MIB module.
Required groups
| mandatory | mplsTunnelExtGroup | |
| optional | mplsTunnelExtIpOperatorGroup |
This group is mandatory for devices that support configuration of IP-based identifier tunnels. |
| optional | mplsTunnelExtIccOperatorGroup |
This group is mandatory for devices that support configuration of ICC based tunnels. |
OID
.1.3.6.1.2.1.10.166.20.1.1.2Compliance statement for agents that only provide
read-only support for the MPLS-TE-EXT-STD-MIB module.
read-only support for the MPLS-TE-EXT-STD-MIB module.
Required groups
| mandatory | mplsTunnelExtGroup | |
| optional | mplsTunnelExtIpOperatorGroup |
This group is mandatory for devices that support configuration of IP-based identifier tunnels. |
| optional | mplsTunnelExtIccOperatorGroup |
This group is mandatory for devices that support configuration of ICC-based tunnels. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| mplsTunnelExtOppositeDirPtr | readonly | Write access is not required. | |
| mplsTunnelExtOppositeDirTnlValid | readonly | Write access is not required. | |
| mplsTunnelExtDestTnlIndex | readonly | Write access is not required. | |
| mplsTunnelExtDestTnlLspIndex | readonly | Write access is not required. | |
| mplsTunnelExtDestTnlValid | readonly | Write access is not required. | |
| mplsTunnelExtIngressLSRLocalIdValid | readonly | Write access is not required. | |
| mplsTunnelExtEgressLSRLocalIdValid | readonly | Write access is not required. | |
| mplsTunnelExtNodeConfigGlobalId | readonly | Write access is not required. | |
| mplsTunnelExtNodeConfigNodeId | readonly | Write access is not required. | |
| mplsTunnelExtNodeConfigStorageType | readonly | Write access is not required. | |
| mplsTunnelExtNodeConfigRowStatus | readonly |
active(1)
|
Write access is not required. |
| mplsTunnelExtNodeConfigCcId | readonly | Write access is not required. | |
| mplsTunnelExtNodeConfigIccId | readonly | Write access is not required. | |
| mplsTunnelExtNodeConfigIccValid | readonly | Write access is not required. |