MPLS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
59

mplsAdminGroupList

table
.1.3.6.1.4.1.2636.3.2.2.2 · 1 row entry · 2 columns
Open in standard view
Uses the juniper variant from /opt/observium/mibs/juniper.
Command help
Walk mplsAdminGroupList
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MPLS-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MPLS-MIB::mplsAdminGroupList' 
List of configured administrative groups.
Administrative groups are used to label links in
the Traffic Engineering topology in order to place
constraints (include and exclude) on LSP paths.
mplsAdminGroup row .1.3.6.1.4.1.2636.3.2.2.2.1
A mapping between a configured group number and its
human-readable name. The group number should be
between 0 and 31, inclusive.
Indexes
Column Syntax OID
mplsAdminGroupNumber
Index of the administrative group.
Integer32
Constraints:
range: 0-31
 .1.3.6.1.4.1.2636.3.2.2.2.1.1
mplsAdminGroupName
Name of the administrative group.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.2636.3.2.2.2.1.2

mplsLspList

table deprecated
.1.3.6.1.4.1.2636.3.2.3 · 1 row entry · 27 columns
Open in standard view
Uses the juniper variant from /opt/observium/mibs/juniper.
Command help
Walk mplsLspList
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MPLS-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MPLS-MIB::mplsLspList' 
******* Deprecated Object ******
List of Configured Label Switched Paths. This object
has been deprecated and replaced by mplsLspInfoList
mplsLspEntry row .1.3.6.1.4.1.2636.3.2.3.1
******* Deprecated Object ******
Entry containing information about a particular
Label Switched Path. This object has been deprecated
and replaced by mplsLspInfoEntry
Indexes
Column Syntax OID
mplsLspNamedeprecated
******* Deprecated Object ******
Name of the Label Switched Path.
This object has been deprecated and replaced by
mplsLspInfoName
OctetString
Constraints:
range: 32-32
 .1.3.6.1.4.1.2636.3.2.3.1.1
mplsLspStatedeprecated
The operational state of the LSP.
Enumeration
Enumerated Values:
1unknown
2up
3down
4notInService
5backupActive
 .1.3.6.1.4.1.2636.3.2.3.1.2
mplsLspOctetsdeprecated
The number of octets that have been forwarded
over current LSP active path. The number reported
is not realtime, may subject to several minutes
delay. The delay is controllable by mpls statistics
gathering interval, wh…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2636.3.2.3.1.3
mplsLspPacketsdeprecated
The number of packets that have been forwarded
over current LSP active path. The number reported
is not realtime, may subject to several minutes
delay. The delay is controllable by mpls statistics
gathering interval, w…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2636.3.2.3.1.4
mplsLspAgedeprecated
The age (i.e., time from creation till now) of
this LSP in 10-millisecond periods.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.2636.3.2.3.1.5
mplsLspTimeUpdeprecated
The total time in 10-millisecond units that this
LSP has been operational. For example, the
percentage up time can be determined by computing
(mplsLspTimeUp/mplsLspAge * 100 %).
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.2636.3.2.3.1.6
mplsLspPrimaryTimeUpdeprecated
The total time in 10-millisecond units that this
LSP's primary path has been operational. For
example, the percentage contribution of the primary
path to the operational time is given by
(mplsLspPrimaryTimeUp/mplsLspTi…
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.2636.3.2.3.1.7
mplsLspTransitionsdeprecated
The number of state transitions (up -> down and
down -> up) this LSP has undergone.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2636.3.2.3.1.8
mplsLspLastTransitiondeprecated
The time in 10-millisecond units since the last
transition occurred on this LSP.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.2636.3.2.3.1.9
mplsLspPathChangesdeprecated
The number of path changes this LSP has had. For
every path change (path down, path up, path change),
a corresponding syslog/trap (if enabled) is generated
for it.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2636.3.2.3.1.10
mplsLspLastPathChangedeprecated
The time in 10-millisecond units since the last
change occurred on this LSP.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.2636.3.2.3.1.11
mplsLspConfiguredPathsdeprecated
The number of paths configured for this LSP.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2636.3.2.3.1.12
mplsLspStandbyPathsdeprecated
The number of standby paths configured for
this LSP.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2636.3.2.3.1.13
mplsLspOperationalPathsdeprecated
The number of operational paths for this LSP.
This includes the path currently active, as
well as operational standby paths.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2636.3.2.3.1.14
mplsLspFromdeprecated
Source IP address of this LSP.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2636.3.2.3.1.15
mplsLspTodeprecated
Destination IP address of this LSP.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2636.3.2.3.1.16
mplsPathNamedeprecated
The name of the active path for this LSP, if
any. If there is none, the name should be
empty; in that case, the rest of the fields
in mplsLspEntry are meaningless.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.2636.3.2.3.1.17
mplsPathTypedeprecated
The type of path that is active, i.e., a
primary path, a standby path, a generic
secondary path, or a bypass path.
The value other, primary, standby and
secondary apply to data LSPs, and are
meaningful only if mplsPathN…
Enumeration
Enumerated Values:
1other
2primary
3standby
4secondary
5bypass
 .1.3.6.1.4.1.2636.3.2.3.1.18
mplsPathExplicitRoutedeprecated
The explicit route used to set up this LSP.
This may either be the route configured by
the user, or a route automatically computed
to satisfy constraints set by the user.
This field is a displayable string in the
for…
OctetString
Constraints:
range: 0-1024
 .1.3.6.1.4.1.2636.3.2.3.1.19
mplsPathRecordRoutedeprecated
The route actually used for this path, as
recorded by the signaling protocol.
This field is a displayable string in the
format of XXX.XXX.XXX.XXX <space>
repeated for each address.
This field is meaningless unles…
OctetString
Constraints:
range: 0-1024
 .1.3.6.1.4.1.2636.3.2.3.1.20
mplsPathBandwidthdeprecated
The configured bandwidth for this LSP, in units
of thousands of bits per second (Kbps). This
field is meaningless unless mplsPathName is not empty
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2636.3.2.3.1.21
mplsPathCOSdeprecated
The configured Class Of Service on this path. If
the value is between 0 and 7 inclusive, this value
will be inserted in the 3 bit COS field in the
label. If the value is 255, the value in the COS
field of the label wi…
Integer32
Constraints:
range: 255-255
range: 0-7
 .1.3.6.1.4.1.2636.3.2.3.1.22
mplsPathIncludedeprecated
This is a configured set of colors (administrative
groups) specified as a bit vector (i.e., bit n is 1
if color n is in the set, where n = 0 is the LSB).
For each link that this path goes through, the
link MUST have col…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2636.3.2.3.1.23
mplsPathExcludedeprecated
This is a configured set of colors (administrative
groups) specified as a bit vector (i.e., bit n is 1
if color n is in the set, where n = 0 is the LSB).
For each link that this path goes through, the
link MUST have col…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2636.3.2.3.1.24
mplsPathSetupPrioritydeprecated
The setup priority configured for this path. This
field is meaningless unless mplsPathName is not empty
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.2636.3.2.3.1.25
mplsPathHoldPrioritydeprecated
The hold priority configured for this path. This
field is meaningless unless mplsPathName is not empty
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.2636.3.2.3.1.26
mplsPathPropertiesdeprecated
The set of configured properties for this path,
expressed as a bit map. For example, if the path
is an adaptive path, the bit corresponding to bit
value xxx is set. This field is meaningless
unless mplsPathName is not…
Enumeration
Enumerated Values:
1record-route
2adaptive
4cspf
8mergeable
16preemptable
32preemptive
64fast-reroute
 .1.3.6.1.4.1.2636.3.2.3.1.27

mplsLspInfoList

table
.1.3.6.1.4.1.2636.3.2.5 · 1 row entry · 30 columns
Open in standard view
Uses the juniper variant from /opt/observium/mibs/juniper.
Command help
Walk mplsLspInfoList
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MPLS-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MPLS-MIB::mplsLspInfoList' 
List of Configured Label Switched Paths.
mplsLspInfoEntry row .1.3.6.1.4.1.2636.3.2.5.1
Entry containing information about a particular
Label Switched Path.
Indexes
Column Syntax OID
mplsLspInfoName
Name of the Label Switched Path.
OctetString
Constraints:
range: 1-64
 .1.3.6.1.4.1.2636.3.2.5.1.1
mplsLspInfoState
The operational state of the LSP.
Enumeration
Enumerated Values:
1unknown
2up
3down
4notInService
5backupActive
 .1.3.6.1.4.1.2636.3.2.5.1.2
mplsLspInfoOctets
The number of octets that have been forwarded
over current LSP active path. The number reported
is not realtime, may subject to several minutes
delay. The delay is controllable by mpls statistics
gathering interval, wh…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2636.3.2.5.1.3
mplsLspInfoPackets
The number of packets that have been forwarded
over current LSP active path. The number reported
is not realtime, may subject to several minutes
delay. The delay is controllable by mpls statistics
gathering interval, w…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2636.3.2.5.1.4
mplsLspInfoAge
The age (i.e., time from creation till now) of
this LSP in 10-millisecond periods.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.2636.3.2.5.1.5
mplsLspInfoTimeUp
The total time in 10-millisecond units that this
LSP has been operational. For example, the
percentage up time can be determined by computing
(mplsLspInfoTimeUp/mplsLspInfoAge * 100 %).
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.2636.3.2.5.1.6
mplsLspInfoPrimaryTimeUp
The total time in 10-millisecond units that this
LSP's primary path has been operational. For
example, the percentage contribution of the primary
path to the operational time is given by
(mplsLspInfoPrimaryTimeUp/mplsL…
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.2636.3.2.5.1.7
mplsLspInfoTransitions
The number of state transitions (up -> down and
down -> up) this LSP has undergone.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2636.3.2.5.1.8
mplsLspInfoLastTransition
The time in 10-millisecond units since the last
transition occurred on this LSP.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.2636.3.2.5.1.9
mplsLspInfoPathChanges
The number of path changes this LSP has had. For
every path change (path down, path up, path change),
a corresponding syslog/trap (if enabled) is generated
for it.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2636.3.2.5.1.10
mplsLspInfoLastPathChange
The time in 10-millisecond units since the last
change occurred on this LSP.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.2636.3.2.5.1.11
mplsLspInfoConfiguredPaths
The number of paths configured for this LSP.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2636.3.2.5.1.12
mplsLspInfoStandbyPaths
The number of standby paths configured for
this LSP.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2636.3.2.5.1.13
mplsLspInfoOperationalPaths
The number of operational paths for this LSP.
This includes the path currently active, as
well as operational standby paths.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2636.3.2.5.1.14
mplsLspInfoFrom
Source IP address of this LSP.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2636.3.2.5.1.15
mplsLspInfoTo
Destination IP address of this LSP.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2636.3.2.5.1.16
mplsPathInfoName
The name of the active path for this LSP, if
any. If there is none, the name should be
empty; in that case, the rest of the fields
in mplsLspInfoEntry are meaningless.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.2636.3.2.5.1.17
mplsPathInfoType
The type of path that is active, i.e., a
primary path, a standby path, a generic
secondary path, or a bypass path.
The value other, primary, standby and
secondary apply to data LSPs, and are
meaningful only if mplsPathI…
Enumeration
Enumerated Values:
1other
2primary
3standby
4secondary
5bypass
 .1.3.6.1.4.1.2636.3.2.5.1.18
mplsPathInfoExplicitRoute
The explicit route used to set up this LSP.
This may either be the route configured by
the user, or a route automatically computed
to satisfy constraints set by the user.
This field is a displayable string in the
for…
OctetString
Constraints:
range: 0-1024
 .1.3.6.1.4.1.2636.3.2.5.1.19
mplsPathInfoRecordRoute
The route actually used for this path, as
recorded by the signaling protocol.
This field is a displayable string in the
format of XXX.XXX.XXX.XXX <space>
repeated for each address.
This field is meaningless unles…
OctetString
Constraints:
range: 0-1024
 .1.3.6.1.4.1.2636.3.2.5.1.20
mplsPathInfoBandwidth
The configured bandwidth for this LSP, in units
of thousands of bits per second (Kbps). This
field is meaningless unless mplsPathInfoName is not empty
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2636.3.2.5.1.21
mplsPathInfoCOS
The configured Class Of Service on this path. If
the value is between 0 and 7 inclusive, this value
will be inserted in the 3 bit COS field in the
label. If the value is 255, the value in the COS
field of the label wi…
Integer32
Constraints:
range: 255-255
range: 0-7
 .1.3.6.1.4.1.2636.3.2.5.1.22
mplsPathInfoInclude
This is a configured set of colors (administrative
groups) specified as a bit vector (i.e., bit n is 1
if color n is in the set, where n = 0 is the LSB).
For each link that this path goes through, the
link MUST have col…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2636.3.2.5.1.23
mplsPathInfoExclude
This is a configured set of colors (administrative
groups) specified as a bit vector (i.e., bit n is 1
if color n is in the set, where n = 0 is the LSB).
For each link that this path goes through, the
link MUST have col…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2636.3.2.5.1.24
mplsPathInfoSetupPriority
The setup priority configured for this path. This
field is meaningless unless mplsPathInfoName is not empty
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.2636.3.2.5.1.25
mplsPathInfoHoldPriority
The hold priority configured for this path. This
field is meaningless unless mplsPathInfoName is not empty
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.2636.3.2.5.1.26
mplsPathInfoProperties
The set of configured properties for this path,
expressed as a bit map. For example, if the path
is an adaptive path, the bit corresponding to bit
value xxx is set. This field is meaningless
unless mplsPathInfoName is…
Enumeration
Enumerated Values:
1record-route
2adaptive
4cspf
8mergeable
16preemptable
32preemptive
64fast-reroute
 .1.3.6.1.4.1.2636.3.2.5.1.27
mplsLspInfoAggrOctets
The number of octets that have beeen forwarded over
current LSP. This is an aggregate count of octets
forwarded over all LSP instances from the time
LSP was up. The number reported is not realtime, may
be subject to sev…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2636.3.2.5.1.28
mplsLspInfoAggrPackets
The number of packets that have been forwarded over
current LSP. This is an aggregate count of packets
forwarded over all LSP instances from the time
LSP was up. The number reported is not realtime, may
be subject to se…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2636.3.2.5.1.29
mplsPathInfoRecordRouteWithLabels
The route actually used for this path, as
recorded by the signaling protocol.
This field is a displayable string in the
format of XXX.XXX.XXX.XXX <flag/label> <space>
repeated for each address.
This field is meaningless…
OctetString
Constraints:
range: 0-1024
 .1.3.6.1.4.1.2636.3.2.5.1.30