MPLS-LSR-STD-MIB
This MIB module contains managed object definitions for
the Multiprotocol Label Switching (MPLS) Router as
defined in: Rosen, E., Viswanathan, A., and R.
Callon, Multiprotocol Label Switching Architecture,
RFC 3031, January 2001.
Copyright (C) The Internet Society (2004). The
initial version of this MIB module was published
in RFC 3812. For full legal notices see the RFC
itself or see:
http://www.ietf.org/copyrights/ianamib.html
|
Imported Objects
| AddressFamilyNumbers | IANA-ADDRESS-FAMILY-NUMBERS-MIB |
| ifCounterDiscontinuityGroup, ifGeneralInformationGroup, InterfaceIndexOrZero | IF-MIB |
| InetAddressType, InetAddress | INET-ADDRESS-MIB |
| MplsOwner, MplsBitRate, MplsLabel, MplsLSPID, mplsStdMIB | MPLS-TC-STD-MIB |
| MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP | SNMPv2-CONF |
| OBJECT-TYPE, zeroDotZero, Gauge32, Counter64, Unsigned32, Counter32, Integer32, NOTIFICATION-TYPE, MODULE-IDENTITY | SNMPv2-SMI |
| RowPointer, TimeStamp, TEXTUAL-CONVENTION, StorageType, RowStatus, TruthValue | SNMPv2-TC |
Type Definitions (2)
| Name | Base Type | Values/Constraints |
|---|---|---|
 MplsIndexNextType | range: 1..24 | |
| MplsIndexType | range: 1..24 |
Objects
  mplsLsrStdMIB  | .1.3.6.1.2.1.10.166.2 | |
| mplsLsrNotifications | .1.3.6.1.2.1.10.166.2.0 | |
| mplsLsrObjects | .1.3.6.1.2.1.10.166.2.1 | |
 mplsInterfaceTable | .1.3.6.1.2.1.10.166.2.1.1 | |
 mplsInterfaceEntry | .1.3.6.1.2.1.10.166.2.1.1.1 | |
 mplsInterfaceIndex | .1.3.6.1.2.1.10.166.2.1.1.1.1 | |
| mplsInterfaceLabelMinIn | .1.3.6.1.2.1.10.166.2.1.1.1.2 | |
| mplsInterfaceLabelMaxIn | .1.3.6.1.2.1.10.166.2.1.1.1.3 | |
| mplsInterfaceLabelMinOut | .1.3.6.1.2.1.10.166.2.1.1.1.4 | |
| mplsInterfaceLabelMaxOut | .1.3.6.1.2.1.10.166.2.1.1.1.5 | |
| mplsInterfaceTotalBandwidth | .1.3.6.1.2.1.10.166.2.1.1.1.6 | |
| mplsInterfaceAvailableBandwidth | .1.3.6.1.2.1.10.166.2.1.1.1.7 | |
| mplsInterfaceLabelParticipationType | .1.3.6.1.2.1.10.166.2.1.1.1.8 | |
| mplsXCTable | .1.3.6.1.2.1.10.166.2.1.10 | |
| mplsXCEntry | .1.3.6.1.2.1.10.166.2.1.10.1 | |
| mplsXCIndex | .1.3.6.1.2.1.10.166.2.1.10.1.1 | |
| mplsXCOperStatus | .1.3.6.1.2.1.10.166.2.1.10.1.10 | |
| mplsXCInSegmentIndex | .1.3.6.1.2.1.10.166.2.1.10.1.2 | |
| mplsXCOutSegmentIndex | .1.3.6.1.2.1.10.166.2.1.10.1.3 | |
| mplsXCLspId | .1.3.6.1.2.1.10.166.2.1.10.1.4 | |
| mplsXCLabelStackIndex | .1.3.6.1.2.1.10.166.2.1.10.1.5 | |
| mplsXCOwner | .1.3.6.1.2.1.10.166.2.1.10.1.6 | |
| mplsXCRowStatus | .1.3.6.1.2.1.10.166.2.1.10.1.7 | |
| mplsXCStorageType | .1.3.6.1.2.1.10.166.2.1.10.1.8 | |
| mplsXCAdminStatus | .1.3.6.1.2.1.10.166.2.1.10.1.9 | |
 mplsMaxLabelStackDepth | .1.3.6.1.2.1.10.166.2.1.11 | |
| mplsLabelStackIndexNext | .1.3.6.1.2.1.10.166.2.1.12 | |
| mplsLabelStackTable | .1.3.6.1.2.1.10.166.2.1.13 | |
| mplsLabelStackEntry | .1.3.6.1.2.1.10.166.2.1.13.1 | |
| mplsLabelStackIndex | .1.3.6.1.2.1.10.166.2.1.13.1.1 | |
| mplsLabelStackLabelIndex | .1.3.6.1.2.1.10.166.2.1.13.1.2 | |
| mplsLabelStackLabel | .1.3.6.1.2.1.10.166.2.1.13.1.3 | |
| mplsLabelStackLabelPtr | .1.3.6.1.2.1.10.166.2.1.13.1.4 | |
| mplsLabelStackRowStatus | .1.3.6.1.2.1.10.166.2.1.13.1.5 | |
| mplsLabelStackStorageType | .1.3.6.1.2.1.10.166.2.1.13.1.6 | |
| mplsInSegmentMapTable | .1.3.6.1.2.1.10.166.2.1.14 | |
| mplsInSegmentMapEntry | .1.3.6.1.2.1.10.166.2.1.14.1 | |
| mplsInSegmentMapInterface | .1.3.6.1.2.1.10.166.2.1.14.1.1 | |
| mplsInSegmentMapLabel | .1.3.6.1.2.1.10.166.2.1.14.1.2 | |
| mplsInSegmentMapLabelPtrIndex | .1.3.6.1.2.1.10.166.2.1.14.1.3 | |
| mplsInSegmentMapIndex | .1.3.6.1.2.1.10.166.2.1.14.1.4 | |
| mplsXCNotificationsEnable | .1.3.6.1.2.1.10.166.2.1.15 | |
| mplsInterfacePerfTable | .1.3.6.1.2.1.10.166.2.1.2 | |
| mplsInterfacePerfEntry | .1.3.6.1.2.1.10.166.2.1.2.1 | |
| mplsInterfacePerfInLabelsInUse | .1.3.6.1.2.1.10.166.2.1.2.1.1 | |
| mplsInterfacePerfInLabelLookupFailures | .1.3.6.1.2.1.10.166.2.1.2.1.2 | |
| mplsInterfacePerfOutLabelsInUse | .1.3.6.1.2.1.10.166.2.1.2.1.3 | |
| mplsInterfacePerfOutFragmentedPkts | .1.3.6.1.2.1.10.166.2.1.2.1.4 | |
| mplsInSegmentIndexNext | .1.3.6.1.2.1.10.166.2.1.3 | |
| mplsInSegmentTable | .1.3.6.1.2.1.10.166.2.1.4 | |
| mplsInSegmentEntry | .1.3.6.1.2.1.10.166.2.1.4.1 | |
| mplsInSegmentIndex | .1.3.6.1.2.1.10.166.2.1.4.1.1 | |
| mplsInSegmentRowStatus | .1.3.6.1.2.1.10.166.2.1.4.1.10 | |
| mplsInSegmentStorageType | .1.3.6.1.2.1.10.166.2.1.4.1.11 | |
| mplsInSegmentInterface | .1.3.6.1.2.1.10.166.2.1.4.1.2 | |
| mplsInSegmentLabel | .1.3.6.1.2.1.10.166.2.1.4.1.3 | |
| mplsInSegmentLabelPtr | .1.3.6.1.2.1.10.166.2.1.4.1.4 | |
| mplsInSegmentNPop | .1.3.6.1.2.1.10.166.2.1.4.1.5 | |
| mplsInSegmentAddrFamily | .1.3.6.1.2.1.10.166.2.1.4.1.6 | |
| mplsInSegmentXCIndex | .1.3.6.1.2.1.10.166.2.1.4.1.7 | |
| mplsInSegmentOwner | .1.3.6.1.2.1.10.166.2.1.4.1.8 | |
| mplsInSegmentTrafficParamPtr | .1.3.6.1.2.1.10.166.2.1.4.1.9 | |
| mplsInSegmentPerfTable | .1.3.6.1.2.1.10.166.2.1.5 | |
| mplsInSegmentPerfEntry | .1.3.6.1.2.1.10.166.2.1.5.1 | |
| mplsInSegmentPerfOctets | .1.3.6.1.2.1.10.166.2.1.5.1.1 | |
| mplsInSegmentPerfPackets | .1.3.6.1.2.1.10.166.2.1.5.1.2 | |
| mplsInSegmentPerfErrors | .1.3.6.1.2.1.10.166.2.1.5.1.3 | |
| mplsInSegmentPerfDiscards | .1.3.6.1.2.1.10.166.2.1.5.1.4 | |
| mplsInSegmentPerfHCOctets | .1.3.6.1.2.1.10.166.2.1.5.1.5 | |
| mplsInSegmentPerfDiscontinuityTime | .1.3.6.1.2.1.10.166.2.1.5.1.6 | |
| mplsOutSegmentIndexNext | .1.3.6.1.2.1.10.166.2.1.6 | |
| mplsOutSegmentTable | .1.3.6.1.2.1.10.166.2.1.7 | |
| mplsOutSegmentEntry | .1.3.6.1.2.1.10.166.2.1.7.1 | |
| mplsOutSegmentIndex | .1.3.6.1.2.1.10.166.2.1.7.1.1 | |
| mplsOutSegmentTrafficParamPtr | .1.3.6.1.2.1.10.166.2.1.7.1.10 | |
| mplsOutSegmentRowStatus | .1.3.6.1.2.1.10.166.2.1.7.1.11 | |
| mplsOutSegmentStorageType | .1.3.6.1.2.1.10.166.2.1.7.1.12 | |
| mplsOutSegmentInterface | .1.3.6.1.2.1.10.166.2.1.7.1.2 | |
| mplsOutSegmentPushTopLabel | .1.3.6.1.2.1.10.166.2.1.7.1.3 | |
| mplsOutSegmentTopLabel | .1.3.6.1.2.1.10.166.2.1.7.1.4 | |
| mplsOutSegmentTopLabelPtr | .1.3.6.1.2.1.10.166.2.1.7.1.5 | |
| mplsOutSegmentNextHopAddrType | .1.3.6.1.2.1.10.166.2.1.7.1.6 | |
| mplsOutSegmentNextHopAddr | .1.3.6.1.2.1.10.166.2.1.7.1.7 | |
| mplsOutSegmentXCIndex | .1.3.6.1.2.1.10.166.2.1.7.1.8 | |
| mplsOutSegmentOwner | .1.3.6.1.2.1.10.166.2.1.7.1.9 | |
| mplsOutSegmentPerfTable | .1.3.6.1.2.1.10.166.2.1.8 | |
| mplsOutSegmentPerfEntry | .1.3.6.1.2.1.10.166.2.1.8.1 | |
| mplsOutSegmentPerfOctets | .1.3.6.1.2.1.10.166.2.1.8.1.1 | |
| mplsOutSegmentPerfPackets | .1.3.6.1.2.1.10.166.2.1.8.1.2 | |
| mplsOutSegmentPerfErrors | .1.3.6.1.2.1.10.166.2.1.8.1.3 | |
| mplsOutSegmentPerfDiscards | .1.3.6.1.2.1.10.166.2.1.8.1.4 | |
| mplsOutSegmentPerfHCOctets | .1.3.6.1.2.1.10.166.2.1.8.1.5 | |
| mplsOutSegmentPerfDiscontinuityTime | .1.3.6.1.2.1.10.166.2.1.8.1.6 | |
| mplsXCIndexNext | .1.3.6.1.2.1.10.166.2.1.9 | |
| mplsLsrConformance | .1.3.6.1.2.1.10.166.2.2 | |
| mplsLsrGroups | .1.3.6.1.2.1.10.166.2.2.1 | |
| mplsLsrCompliances | .1.3.6.1.2.1.10.166.2.2.2 |
Notifications/Traps
| Name | OID | Description |
|---|---|---|
 mplsXCUp | .1.3.6.1.2.1.10.166.2.0.1 | This notification is generated when the mplsXCOperStatus object for one or more contiguous entries in mplsXCTable are about to enter the up(1) state from some other state. The included values of mplsXCOperStatus MUST both be set equal to this new state (i.e: up(1)). The two instances of mplsXCOperStatus in this notification indicate the range of indexes that are affected. Note that all the indexes of the two ends of the range can be derived from the instance identifiers of these two objects. For cases where a contiguous range of cross-connects have transitioned into the up(1) state at roughly the same time, the device SHOULD issue a single notification for each range of contiguous indexes in an effort to minimize the emission of a large number of notifications. If a notification has to be issued for just a single cross-connect entry, then the instance identifier (and values) of the two mplsXCOperStatus objects MUST be the identical. |
| mplsXCDown | .1.3.6.1.2.1.10.166.2.0.2 | This notification is generated when the
mplsXCOperStatus object for one or more contiguous
entries in mplsXCTable are about to enter the
down(2) state from some other state. The included values
of mplsXCOperStatus MUST both be set equal to this
down(2) state. The two instances of mplsXCOperStatus
in this notification indicate the range of indexes
that are affected. Note that all the indexes of the
two ends of the range can be derived from the
instance identifiers of these two objects. For
cases where a contiguous range of cross-connects
have transitioned into the down(2) state at roughly
the same time, the device SHOULD issue a single
notification for each range of contiguous indexes in
an effort to minimize the emission of a large number
of notifications. If a notification has to be
issued for just a single cross-connect entry, then
the instance identifier (and values) of the two
mplsXCOperStatus objects MUST be identical. |