Standard view Table view

MPLS-LSR-EXT-STD-MIB

        This MIB module contains generic object definitions for
MPLS LSRs in transport networks.
        
Copyright (c) 2015 IETF Trust and the persons identified as
authors of the code.  All rights reserved.
        
Redistribution and use in source and binary forms, with or
without modification, is permitted pursuant to, and subject to
the license terms contained in, the Simplified BSD License set
forth in Section 4.c of the IETF Trust's Legal Provisions
Relating to IETF Documents
(http://trustee.ietf.org/license-info).

Source file: MPLS-LSR-EXT-STD-MIB
Last revised: 2 Feb 2015, 00:00 UTC
Identity: mplsLsrExtStdMIB
Base OID: 1.3.6.1.2.1.10.166.19

Imported Objects

MPLS-LSR-STD-MIB	mplsInSegmentGroup (no object page) mplsInterfaceGroup (no object page) mplsLsrNotificationGroup (no object page) mplsOutSegmentGroup (no object page) mplsXCGroup (no object page) mplsXCIndex mplsXCInSegmentIndex mplsXCOutSegmentIndex
MPLS-TC-STD-MIB	mplsStdMIB
SNMPv2-CONF	MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI	MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page)
SNMPv2-TC	RowPointer

Net-SNMP examples using the rfc MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity

/usr/bin/snmptranslate -Pud -Ir -On -m 'MPLS-LSR-EXT-STD-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'MPLS-LSR-EXT-STD-MIB::mplsLsrExtStdMIB'

Walk the MIB subtree

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MPLS-LSR-EXT-STD-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MPLS-LSR-EXT-STD-MIB::mplsLsrExtStdMIB'

How SNMP, Net-SNMP, MIB paths, and variants work

Objects (10)

mplsLsrExtStdMIB		`.1.3.6.1.2.1.10.166.19`
mplsLsrExtNotifications		`.1.3.6.1.2.1.10.166.19.0`
mplsLsrExtObjects		`.1.3.6.1.2.1.10.166.19.1`
mplsXCExtTable		`.1.3.6.1.2.1.10.166.19.1.1`
mplsXCExtEntry	MPLS-LSR-STD-MIBmplsXCIndexMPLS-LSR-STD-MIBmplsXCInSegmentIndexMPLS-LSR-STD-MIBmplsXCOutSegmentIndex	`.1.3.6.1.2.1.10.166.19.1.1.1`
mplsXCExtTunnelPointer	SNMPv2-TCRowPointer	`.1.3.6.1.2.1.10.166.19.1.1.1.1`
mplsXCExtOppositeDirXCPtr r/w	SNMPv2-TCRowPointer	`.1.3.6.1.2.1.10.166.19.1.1.1.2`
mplsLsrExtConformance		`.1.3.6.1.2.1.10.166.19.2`
mplsLsrExtCompliances		`.1.3.6.1.2.1.10.166.19.2.1`
mplsLsrExtGroups		`.1.3.6.1.2.1.10.166.19.2.2`

Dependencies (10) 5 direct · 5 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree

MPLS-LSR-EXT-STD-MIBrfcselected
- MPLS-LSR-STD-MIBrfc8 symbols
  - IANA-ADDRESS-FAMILY-NUMBERS-MIBrfc1 symbol
    - SNMPv2-SMIrfc2 symbols
    - SNMPv2-TCrfc1 symbol
      - SNMPv2-SMIrfcshared1 symbol
  - IF-MIBrfc3 symbols
    - IANAifType-MIBrfc1 symbol
      - SNMPv2-SMIrfcshared2 symbols
      - SNMPv2-TCrfcshared1 symbol
    - SNMPv2-CONFrfc3 symbols
      - SNMPv2-SMIrfcshared3 symbols
    - SNMPv2-MIBrfc1 symbol
      - SNMPv2-CONFrfcshared3 symbols
      - SNMPv2-SMIrfcshared7 symbols
      - SNMPv2-TCrfcshared3 symbols
    - SNMPv2-SMIrfcshared9 symbols
    - SNMPv2-TCrfcshared8 symbols
  - INET-ADDRESS-MIBrfc2 symbols
    - SNMPv2-SMIrfcshared3 symbols
    - SNMPv2-TCrfcshared1 symbol
  - MPLS-TC-STD-MIBrfc5 symbols
    - SNMPv2-SMIrfcshared4 symbols
    - SNMPv2-TCrfcshared1 symbol
  - SNMPv2-CONFrfcshared3 symbols
  - SNMPv2-SMIrfcshared9 symbols
  - SNMPv2-TCrfcshared6 symbols
- MPLS-TC-STD-MIBrfcshared1 symbol
- SNMPv2-CONFrfcshared2 symbols
- SNMPv2-SMIrfcshared2 symbols
- SNMPv2-TCrfcshared1 symbol

Dependency-first compile order

Conformance Groups (2)

mplsXCExtGroup	mplsXCExtTunnelPointer mplsXCExtOppositeDirXCPtr This object should be supported in order to access the tunnel entry from the XC entry.	`.1.3.6.1.2.1.10.166.19.2.2.1`
mplsXCExtReadOnlyObjectsGroup	mplsXCExtTunnelPointer mplsXCExtOppositeDirXCPtr This Object is needed to associate the opposite-direction (forward/reverse) XC entry.	`.1.3.6.1.2.1.10.166.19.2.2.2`

Compliance Statements (2)

OID .1.3.6.1.2.1.10.166.19.2.1.1

Compliance statement for agents that provide full support
for MPLS-LSR-EXT-STD-MIB.
The mandatory group has to be implemented by all LSRs
that originate, terminate, or act as transit for
TE-LSPs/tunnels.
In addition, depending on the type of tunnels supported,
other groups become mandatory as explained below.

Required groups

mandatory	MPLS-LSR-STD-MIB::mplsInSegmentGroup
mandatory	MPLS-LSR-STD-MIB::mplsOutSegmentGroup
mandatory	MPLS-LSR-STD-MIB::mplsXCGroup
mandatory	MPLS-LSR-STD-MIB::mplsLsrNotificationGroup
mandatory	mplsXCExtGroup

OID .1.3.6.1.2.1.10.166.19.2.1.2

Compliance requirement for implementations that only
provide read-only support for MPLS-LSR-EXT-STD-MIB.
Such devices can then be monitored but cannot be
configured using this MIB module.