MPLS-LC-ATM-STD-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
9

mplsLcAtmStdInterfaceConfTable

table
.1.3.6.1.2.1.10.166.9.1.1 · 1 row entry · 9 columns
Open in standard view
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk mplsLcAtmStdInterfaceConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MPLS-LC-ATM-STD-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MPLS-LC-ATM-STD-MIB::mplsLcAtmStdInterfaceConfTable' 
This table specifies per-interface MPLS LC-ATM
capability and associated information.  In particular,
this table sparsely extends the MPLS-LSR-STD-MIB's
mplsInterfaceConfTable.
mplsLcAtmStdInterfaceConfEntry row .1.3.6.1.2.1.10.166.9.1.1.1
An entry in this table is created by an LSR for
every interface capable of supporting MPLS LC-ATM.
Each entry in this table will exist only if a
corresponding entry in ifTable and mplsInterfaceConfTable
exists. If the …
Indexes
Column Syntax OID
mplsLcAtmStdCtrlVpi
This is the VPI value over which this
LSR is willing to accept control traffic on
this interface.
ATM-TC-MIBAtmVpIdentifierr/w
Type Constraints:
range: 0..4095
 .1.3.6.1.2.1.10.166.9.1.1.1.1
mplsLcAtmStdCtrlVci
This is the VCI value over which this
LSR is willing to accept control traffic
on this interface.
MPLS-TC-STD-MIBMplsAtmVcIdentifierr/w
Type Constraints:
range: 32..65535
 .1.3.6.1.2.1.10.166.9.1.1.1.2
mplsLcAtmStdUnlabTrafVpi
This is the VPI value over which this
LSR is willing to accept unlabeled traffic
on this interface.
ATM-TC-MIBAtmVpIdentifierr/w
Type Constraints:
range: 0..4095
 .1.3.6.1.2.1.10.166.9.1.1.1.3
mplsLcAtmStdUnlabTrafVci
This is the VCI value over which this
LSR is willing to accept unlabeled traffic
on this interface.
MPLS-TC-STD-MIBMplsAtmVcIdentifierr/w
Type Constraints:
range: 32..65535
 .1.3.6.1.2.1.10.166.9.1.1.1.4
mplsLcAtmStdVcMerge
If set to true(1), indicates that this interface
is capable of ATM VC merge; otherwise, it MUST
be set to false(2).
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.2.1.10.166.9.1.1.1.5
mplsLcAtmVcDirectlyConnected
This value indicates whether an LC-ATM is directly
or indirectly (by means of a VP) connected. If set to
true(1), indicates that this interface is directly
connected LC-ATM; otherwise, it MUST be set to
false(2). Note…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.2.1.10.166.9.1.1.1.6
mplsLcAtmLcAtmVPI
This is the VPI value used for indirectly
connected LC-ATM interfaces. For these
interfaces, the VPI field is not
available to MPLS, and the label MUST be
encoded entirely within the VCI field
(see [RFC3035]). If the …
ATM-TC-MIBAtmVpIdentifierr/w
Type Constraints:
range: 0..4095
 .1.3.6.1.2.1.10.166.9.1.1.1.7
mplsLcAtmStdIfConfRowStatus
This object is used to create and
delete entries in this table. When configuring
entries in this table, the corresponding
ifEntry and mplsInterfaceConfEntry
MUST exist beforehand. If a manager attempts to
create an en…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.2.1.10.166.9.1.1.1.8
mplsLcAtmStdIfConfStorageType
The storage type for this conceptual row.
Conceptual rows having the value 'permanent(4)'
need not allow write-access to any columnar
objects in the row.
SNMPv2-TCStorageTyper/w
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
Description:
Describes the memory realization of a conceptual row. A
row which is volatile(2) is lost upon reboot. A row which
is either nonVolatile(3), permanent(4) or readOnly(5), is
backed up by stable storage. A row which is …
 .1.3.6.1.2.1.10.166.9.1.1.1.9