Standard view Table view

MPLS-ID-STD-MIB

        This MIB module contains identifier object definitions for
MPLS Traffic Engineering in transport networks.
        
Copyright (c) 2015 IETF Trust and the persons identified as
authors of the code.  All rights reserved.
        
Redistribution and use in source and binary forms, with or
without modification, is permitted pursuant to, and subject to
the license terms contained in, the Simplified BSD License set
forth in Section 4.c of the IETF Trust's Legal Provisions
Relating to IETF Documents
(http://trustee.ietf.org/license-info).

Source file: MPLS-ID-STD-MIB
Last revised: 2 Feb 2015, 00:00 UTC
Identity: mplsIdStdMIB
Base OID: 1.3.6.1.2.1.10.166.18

Imported Objects

MPLS-TC-EXT-STD-MIB	MplsCcId MplsGlobalId MplsIccId MplsNodeId
MPLS-TC-STD-MIB	mplsStdMIB
SNMPv2-CONF	MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI	MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page)

Net-SNMP examples using the rfc MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity

/usr/bin/snmptranslate -Pud -Ir -On -m 'MPLS-ID-STD-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'MPLS-ID-STD-MIB::mplsIdStdMIB'

Walk the MIB subtree

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MPLS-ID-STD-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MPLS-ID-STD-MIB::mplsIdStdMIB'

How SNMP, Net-SNMP, MIB paths, and variants work

Objects (10)

mplsIdStdMIB		`.1.3.6.1.2.1.10.166.18`
mplsIdNotifications		`.1.3.6.1.2.1.10.166.18.0`
mplsIdObjects		`.1.3.6.1.2.1.10.166.18.1`
mplsIdGlobalId r/w	MPLS-TC-EXT-STD-MIBMplsGlobalId	`.1.3.6.1.2.1.10.166.18.1.1`
mplsIdNodeId r/w	MPLS-TC-EXT-STD-MIBMplsNodeId	`.1.3.6.1.2.1.10.166.18.1.2`
mplsIdCc r/w	MPLS-TC-EXT-STD-MIBMplsCcId	`.1.3.6.1.2.1.10.166.18.1.3`
mplsIdIcc r/w	MPLS-TC-EXT-STD-MIBMplsIccId	`.1.3.6.1.2.1.10.166.18.1.4`
mplsIdConformance		`.1.3.6.1.2.1.10.166.18.2`
mplsIdCompliances		`.1.3.6.1.2.1.10.166.18.2.1`
mplsIdGroups		`.1.3.6.1.2.1.10.166.18.2.2`

Dependencies (5) 4 direct · 1 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree

MPLS-ID-STD-MIBrfcselected
- MPLS-TC-EXT-STD-MIBrfc4 symbols
  - MPLS-TC-STD-MIBrfc1 symbol
    - SNMPv2-SMIrfc4 symbols
    - SNMPv2-TCrfc1 symbol
      - SNMPv2-SMIrfcshared1 symbol
  - SNMPv2-SMIrfcshared2 symbols
  - SNMPv2-TCrfcshared1 symbol
- MPLS-TC-STD-MIBrfcshared1 symbol
- SNMPv2-CONFrfc2 symbols
  - SNMPv2-SMIrfcshared3 symbols
- SNMPv2-SMIrfcshared2 symbols

Dependency-first compile order

Conformance Groups (2)

mplsIdIpOperatorGroup	mplsIdGlobalId mplsIdNodeId The objects in this group are optional for an ICC-based node.	`.1.3.6.1.2.1.10.166.18.2.2.1`
mplsIdIccOperatorGroup	mplsIdNodeId mplsIdCc mplsIdIcc The objects in this group are optional for an IP-based node.	`.1.3.6.1.2.1.10.166.18.2.2.2`

Compliance Statements (2)

OID .1.3.6.1.2.1.10.166.18.2.1.1

Compliance statement for agents that provide full
support of the MPLS-ID-STD-MIB module.

Required groups

optional	mplsIdIpOperatorGroup	This group is mandatory for devices that support IP-based identifier configuration.
optional	mplsIdIccOperatorGroup	This group is mandatory for devices that support ICC-based identifier configuration.

OID .1.3.6.1.2.1.10.166.18.2.1.2

Compliance statement for agents that only provide
read-only support for the MPLS-ID-STD-MIB module.