MPLS-FRR-FACILITY-STD-MIB Table View

The mplsFrrFacilityDBTable provides information about the
fast-reroute database.  Each entry belongs to a protected
          
interface, protecting backup tunnel, and protected tunnel.
MPLS interfaces defined on this node are protected by
backup tunnels and are indicated by the index
mplsFrrFacilityProtectedIfIndex.  If the interface index is
set to 0, this indicates that the remaining indexes apply
to all configured protected interfaces.
          
Note that all objects in this table are read-only, and
if new objects are added to this table, they should also
be read-only.
          
It is recommended that ifIndex persistence be enabled
across re-initializations.
If persistence is not implemented, then the value of
mplsFrrFacilityProtectedIfIndex in this
table cannot be guaranteed across restarts and all entries
in this table MUST NOT be persistent, or the values of
mplsFrrFacilityProtectedIfIndex MUST be reconstructed
on restart.
          
It is recommended that entries in this table be persistent
across reboots.
          
The protecting tunnel is indicated by the
index mplsFrrFacilityProtectingTunnelIndex and
represents a valid mplsTunnelEntry.  Note that the tunnel
instance index of the protecting tunnel may be set to 0,
which indicates the tunnel head interface for the
protecting tunnel, as per RFC 3812, but it may also be
defined using the following semantics:
          
- lower 16 bits : protected tunnel instance
- higher 16 bits: must be all zeros

mplsFrrFacilityDBEntry row .1.3.6.1.2.1.204.1.7.1

An entry in the mplsFrrFacilityDBTable represents a single
protected LSP, protected by a backup tunnel on a
specific protected interface, or if the interface
index is set to 0, on all interfaces. Note that for
brevity,…

Indexes

mplsFrrFacilityProtectedIfIndex mplsFrrFacilityProtectingTunnelIndex mplsFrrFacilityBackupTunnelIndex mplsFrrFacilityBackupTunnelInstance mplsFrrFacilityBackupTunnelIngressLSRId mplsFrrFacilityBackupTunnelEgressLSRId

Column	Syntax	OID
mplsFrrFacilityProtectedIfIndex Uniquely identifies the interface configured for FRR protection. If this object is set to 0, this indicates that the remaining indexing combinations for this row apply to all interfaces on this device for which the FRR…	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.2.1.204.1.7.1.1
mplsFrrFacilityProtectingTunnelIndex Uniquely identifies the mplsTunnelEntry primary index for the tunnel head interface designated to protect the interface as specified in the mplsFrrFacilityProtectedIfIndex (and all of the tunnels using this interface). …	MPLS-TC-STD-MIBMplsTunnelIndex Type Constraints: range: 0..65535	.1.3.6.1.2.1.204.1.7.1.2
mplsFrrFacilityBackupTunnelIndex Uniquely identifies the mplsTunnelEntry primary index for the TE tunnel LSP being protected on the interface as specified by mplsFrrFacilityProtectedIfIndex.	MPLS-TC-STD-MIBMplsTunnelIndex Type Constraints: range: 0..65535	.1.3.6.1.2.1.204.1.7.1.3
mplsFrrFacilityBackupTunnelInstance Uniquely identifies the mplsTunnelEntry secondary index for the TE tunnel LSP being protected on the interface as specified by mplsFrrFacilityProtectedIfIndex.	MPLS-TC-STD-MIBMplsTunnelInstanceIndex Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.204.1.7.1.4
mplsFrrFacilityBackupTunnelIngressLSRId Uniquely identifies the mplsTunnelEntry third index for the TE tunnel LSP being protected on the interface as specified by mplsFrrFacilityProtectedIfIndex.	MPLS-TC-STD-MIBMplsLsrIdentifier Type Constraints: range: 4	.1.3.6.1.2.1.204.1.7.1.5
mplsFrrFacilityBackupTunnelEgressLSRId Uniquely identifies the mplsTunnelEntry fourth index for the TE tunnel LSP being protected on the interface as specified by mplsFrrFacilityProtectedIfIndex.	MPLS-TC-STD-MIBMplsLsrIdentifier Type Constraints: range: 4	.1.3.6.1.2.1.204.1.7.1.6
mplsFrrFacilityDBNumProtectingTunnelOnIf The number of backup tunnels protecting the interface specified by mplsFrrFacilityProtectedIfIndex.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.204.1.7.1.7
mplsFrrFacilityDBNumProtectedLspOnIf The number of LSPs currently being protected on the interface specified by mplsFrrFacilityProtectedIfIndex.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.204.1.7.1.8
mplsFrrFacilityDBNumProtectedTunnels The number of tunnels protected on the interface specified by mplsFrrFacilityProtectedIfIndex.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.204.1.7.1.9
mplsFrrFacilityDBProtectingTunnelStatus Specifies the state of the protecting tunnel as specified by mplsFrrFacilityProtectingTunnelIndex. active - This tunnel's label has been placed in the LFIB and is ready to be applied to incomin…	Enumeration Enumerated Values: 1 active 2 ready 3 partial	.1.3.6.1.2.1.204.1.7.1.10
mplsFrrFacilityDBProtectingTunnelResvBw Specifies the amount of bandwidth in units of '1,000 bits per second', actually reserved by the protecting tunnel for facility backup purposes. This value is repeated here from the MPLS-TE-STD-MIB module because the tun…	kilobits per secondMPLS-TC-STD-MIBMplsBitRate Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.204.1.7.1.11