MITEL-PPPGROUP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
2
Rows
2
Columns
13
.1.3.6.1.4.1.1027.4.8.1.2.2 · 1 row entry · 5 columns
Uses the mitel variant from /opt/observium/mibs/mitel.
Command help
Walk mitelPppGrpRemoteConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MITEL-PPPGROUP-MIB' -M '/opt/observium/mibs/mitel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MITEL-PPPGROUP-MIB::mitelPppGrpRemoteConfigTable'
This table contains objects that pertain to the management of
remote LANs that use the PPP Internet standard link protocol.
mitelPppGrpRemoteConfigEntry row .1.3.6.1.4.1.1027.4.8.1.2.2.1
A default entry at conceptual row zero does exist in this
table. The default entry can be used to specify the PPP
authentication protocol only.
Column Syntax OID
This object uniquely identifies this object
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.1027.4.8.1.2.2.1.1
This attribute determines wether the system can accept
or override the DNS IP address submitted by
a remote system. DEFAULT = accept.
Enumerationr/w
Enumerated Values:
1accept
2override
3assign
.1.3.6.1.4.1.1027.4.8.1.2.2.1.2
The IP address to assign to remote if mitelRmtCfgTableIPAddrHandling
is set to assign(3)
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.1027.4.8.1.2.2.1.3
The current status of this entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.1027.4.8.1.2.2.1.4
The mode PPP will be using for the given destination.
Enumerationr/w
Enumerated Values:
1client
2server
.1.3.6.1.4.1.1027.4.8.1.2.2.1.5
.1.3.6.1.4.1.1027.4.8.1.2.3 · 1 row entry · 8 columns
Uses the mitel variant from /opt/observium/mibs/mitel.
Command help
Walk mitelPppGrpPppOverEthernetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MITEL-PPPGROUP-MIB' -M '/opt/observium/mibs/mitel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MITEL-PPPGROUP-MIB::mitelPppGrpPppOverEthernetTable'
Table containing the configuration items needed by the
PPPoE stack.
mitelPppGrpPppOverEthernetEntry row .1.3.6.1.4.1.1027.4.8.1.2.3.1
PPPoE information
Column Syntax OID
Unique Identifier for an entry in PPP over Ethernet Table.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.1027.4.8.1.2.3.1.1
Is this PPPoE instance enabled or not.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.1027.4.8.1.2.3.1.2
The time to wait, in seconds, for a valid response to a
discovery packet before resending it.
Warning: this value is doubled ever time a packet is
resent.
Integer32r/w
Constraints:
range: 1-5
.1.3.6.1.4.1.1027.4.8.1.2.3.1.3
The number of times to resend discovery packets before
giving up on the negotiation.
Integer32r/w
Constraints:
range: 1-15
.1.3.6.1.4.1.1027.4.8.1.2.3.1.4
The RFC states that failure to receive a valid PADS packet
should restart the negotiation. This count stops the system
retrying indefinitely on duff PADS packets by capping the
total number of retry attempts.
Integer32r/w
Constraints:
range: 1-15
.1.3.6.1.4.1.1027.4.8.1.2.3.1.5
The service we wish to request from the remote access
concentrator. Examples of the use of the service name
are to indicate an ISP or a class or quality of
service.
An empty string indicates any service.
OctetStringr/w
Constraints:
range: 0-50
.1.3.6.1.4.1.1027.4.8.1.2.3.1.6
Description of the remote access concentrator we wish
to connect to.
An empty string indicates no preference.
OctetStringr/w
Constraints:
range: 0-50
.1.3.6.1.4.1.1027.4.8.1.2.3.1.7
The entry's row status.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.1027.4.8.1.2.3.1.8