MITEL-NAT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
15

mitelNatGrpIfTable

table
.1.3.6.1.4.1.1027.4.8.1.1.2.1 · 1 row entry · 9 columns
Open in standard view
Uses the mitel variant from /opt/observium/mibs/mitel.
Command help
Walk mitelNatGrpIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MITEL-NAT-MIB' -M '/opt/observium/mibs/mitel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MITEL-NAT-MIB::mitelNatGrpIfTable' 
The IP network address translation configuration table.
mitelNatGrpIfEntry row .1.3.6.1.4.1.1027.4.8.1.1.2.1.1
Contains information about network address
translation on a single IP interface.
Indexes
Column Syntax OID
mitelNatGrpIfAddr
The IP address of the interface.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.1027.4.8.1.1.2.1.1.1
mitelNatGrpIfEnable
Configures the router to enable IP NAT on a
virtual interface.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.1027.4.8.1.1.2.1.1.2
mitelNatGrpIfUdpLifetime
Specifies timeout in seconds for a NAT UDP session.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1027.4.8.1.1.2.1.1.3
mitelNatGrpIfTcpLifetime
Specifies timeout in seconds for a NAT TCP session.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1027.4.8.1.1.2.1.1.4
mitelNatGrpIfTcpFinLifetime
Specifies timeout in seconds for a NAT TCP session once a FIN was seen.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1027.4.8.1.1.2.1.1.5
mitelNatGrpIfTcpRstLifetime
Specifies timeout in seconds for a NAT TCP session once a RST was seen.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1027.4.8.1.1.2.1.1.6
mitelNatGrpIfPingLifetime
Specifies timeout in seconds for an ICMP echo.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1027.4.8.1.1.2.1.1.7
mitelNatGrpIfStatus
The current status of this entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.1027.4.8.1.1.2.1.1.8
mitelNatGrpIfIndex
The current Interface this entry pertains to.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1027.4.8.1.1.2.1.1.9

mitelNatGrpRedirTable

table
.1.3.6.1.4.1.1027.4.8.1.1.2.2 · 1 row entry · 6 columns
Open in standard view
Uses the mitel variant from /opt/observium/mibs/mitel.
Command help
Walk mitelNatGrpRedirTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MITEL-NAT-MIB' -M '/opt/observium/mibs/mitel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MITEL-NAT-MIB::mitelNatGrpRedirTable' 
The IP network address translation redirection table.
mitelNatGrpRedirEntry row .1.3.6.1.4.1.1027.4.8.1.1.2.2.1
Contains information about network address
translation incoming on a single IP interface.
Indexes
Column Syntax OID
mitelNatGrpRedirOldAddr
The IP address of the interface.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.1027.4.8.1.1.2.2.1.1
mitelNatGrpRedirProto
Identifies the IP protocol to redirect, 6 or 17.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1027.4.8.1.1.2.2.1.2
mitelNatGrpRedirOldPort
Identifies the TCP or UDP port to redirect.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1027.4.8.1.1.2.2.1.3
mitelNatGrpRedirNewAddr
The IP address to which the datagram is to be redirected. Default is 0.0.0.0
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.1027.4.8.1.1.2.2.1.4
mitelNatGrpRedirNewPort
The TCP or UDP port to which the datagram is to be redirected.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1027.4.8.1.1.2.2.1.5
mitelNatGrpRedirStatus
The current status of this entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.1027.4.8.1.1.2.2.1.6