MIOX25-MIB Table View

This table contains information relative to
an interface to an X.25 Packet Level Entity
(PLE).

mioxPleEntry row .1.3.6.1.2.1.10.38.1.1.1

These objects manage the encapsulation of
other protocols within X.25.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
mioxPleMaxCircuitsmandatory The maximum number of X.25 circuits that can be open at one time for this interface. A value of zero indicates the interface will not allow any additional circuits (as it may soon be shutdown). A value of 2147483647 al…	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.2.1.10.38.1.1.1.1
mioxPleRefusedConnectionsmandatory The number of X.25 calls from a remote systems to this system that were cleared by this system. The interface instance should identify the X.25 interface the call came in on.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.38.1.1.1.2
mioxPleEnAddrToX121LkupFlrsmandatory The number of times a translation from an Encapsulated Address to an X.121 address failed to find a corresponding X.121 address. Encapsulated addresses can be looked up in the mioxPeerTable or translated via an algorit…	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.38.1.1.1.3
mioxPleLastFailedEnAddrmandatory The last Encapsulated address that failed to find a corresponding X.121 address and caused mioxPleEnAddrToX121LkupFlrs to be incremented. The first octet of this object contains the encapsulation type, the remaining oc…	OctetString Constraints: range: 2-128	.1.3.6.1.2.1.10.38.1.1.1.4
mioxPleEnAddrToX121LkupFlrTimemandatory The most recent value of sysUpTime when the translation from an Encapsulated Address to X.121 address failed to find a corresponding X.121 address.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.38.1.1.1.5
mioxPleX121ToEnAddrLkupFlrsmandatory The number of times the translation from an X.121 address to an Encapsulated Address failed to find a corresponding Encapsulated Address. Addresses successfully recognized by an algorithm do not incremen…	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.38.1.1.1.6
mioxPleLastFailedX121Addressmandatory The last X.121 address that caused mioxPleX121ToEnAddrLkupFlrs to increase.	RFC1382-MIBX121Address Type Constraints: range: 0..17	.1.3.6.1.2.1.10.38.1.1.1.7
mioxPleX121ToEnAddrLkupFlrTimemandatory The most recent value of sysUpTime when the translation from an X.121 address to an Encapsulated Address failed to find a corresponding Encapsulated Address.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.38.1.1.1.8
mioxPleQbitFailuresmandatory The number of times a connection was closed because of a Q-bit failure.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.38.1.1.1.9
mioxPleQbitFailureRemoteAddressmandatory The remote address of the most recent (last) connection that was closed because of a Q-bit failure.	RFC1382-MIBX121Address Type Constraints: range: 0..17	.1.3.6.1.2.1.10.38.1.1.1.10
mioxPleQbitFailureTimemandatory The most recent value of sysUpTime when a connection was closed because of a Q-bit failure. This will also be the last time that mioxPleQbitFailures was incremented.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.38.1.1.1.11
mioxPleMinimumOpenTimermandatory The minimum time in milliseconds this interface will keep a connection open before allowing it to be closed. A value of zero indicates no timer.	RFC1381-MIBPositiveIntegerr/w Type Constraints: range: 0..2147483647	.1.3.6.1.2.1.10.38.1.1.1.12
mioxPleInactivityTimermandatory The amount of time time in milliseconds this interface will keep an idle connection open before closing it. A value of 2147483647 indicates no timer.	RFC1381-MIBPositiveIntegerr/w Type Constraints: range: 0..2147483647	.1.3.6.1.2.1.10.38.1.1.1.13
mioxPleHoldDownTimermandatory The hold down timer in milliseconds. This is the minimum amount of time to wait before trying another call to a host that was previously unsuccessful. A value of 2147483647 indicates the host will not be retried.	RFC1381-MIBPositiveIntegerr/w Type Constraints: range: 0..2147483647	.1.3.6.1.2.1.10.38.1.1.1.14
mioxPleCollisionRetryTimermandatory The Collision Retry Timer in milliseconds. The time to delay between call attempts when the maximum number of circuits is exceeded in a call attempt.	RFC1381-MIBPositiveIntegerr/w Type Constraints: range: 0..2147483647	.1.3.6.1.2.1.10.38.1.1.1.15
mioxPleDefaultPeerIdmandatory This identifies the instance of the index in the mioxPeerTable for the default parameters to use with this interface. The entry identified by this object may have a zero length Encapsulation address and a…	r/w	.1.3.6.1.2.1.10.38.1.1.1.16

This table contains information about the
possible peers this machine may exchange
packets with.

mioxPeerEntry row .1.3.6.1.2.1.10.38.2.1.1

Per peer information.

Indexes

mioxPeerIndex

Column	Syntax	OID
mioxPeerIndexmandatory An index value that distinguished one entry from another. This index is independent of any other index.	RFC1381-MIBPositiveInteger Type Constraints: range: 0..2147483647	.1.3.6.1.2.1.10.38.2.1.1.1
mioxPeerStatusmandatory This reports the status of a peer entry. A value of valid indicates a normal entry that is in use by the agent. A value of underCreation indicates a newly created entry which isn't yet in use because the creating manag…	Enumerationr/w Enumerated Values: 1 valid 2 createRequest 3 underCreation 4 invalid 5 clearCall 6 makeCall	.1.3.6.1.2.1.10.38.2.1.1.2
mioxPeerMaxCircuitsmandatory The maximum number of X.25 circuits allowed to this peer.	RFC1381-MIBPositiveIntegerr/w Type Constraints: range: 0..2147483647	.1.3.6.1.2.1.10.38.2.1.1.3
mioxPeerIfIndexmandatory The value of the ifIndex object for the interface to X.25 to use to call the peer.	RFC1381-MIBPositiveIntegerr/w Type Constraints: range: 0..2147483647	.1.3.6.1.2.1.10.38.2.1.1.4
mioxPeerConnectSecondsmandatory The number of seconds a call to this peer was active. This counter will be incremented by one for every second a connection to a peer was open. If two calls are open at the same time, one second of elap…	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.38.2.1.1.5
mioxPeerX25CallParamIdmandatory The instance of the index object in the x25CallParmTable from RFC 1382 for the X.25 call parameters used to communicate with the remote host. The well known value {0 0} indicates no call parameters specified.	r/w	.1.3.6.1.2.1.10.38.2.1.1.6
mioxPeerEnAddrmandatory The Encapsulation address of the remote host mapped by this table entry. A length of zero indicates the remote IP address is unknown or unspecified for use as a PLE default. The first octet of this objec…	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.2.1.10.38.2.1.1.7
mioxPeerX121Addressmandatory The X.25 address of the remote host mapped by this table entry. A zero length string indicates the X.25 address is unspecified for use as the PLE default.	RFC1382-MIBX121Addressr/w Type Constraints: range: 0..17	.1.3.6.1.2.1.10.38.2.1.1.8
mioxPeerX25CircuitIdmandatory This object identifies the instance of the index for the X.25 circuit open to the peer mapped by this table entry. The well known value {0 0} indicates no connection currently active. For multiple connections, this id…	r/w	.1.3.6.1.2.1.10.38.2.1.1.9
mioxPeerDescrmandatory This object returns any identification information about the peer. An agent may supply the comment information found in the configuration file entry for this peer. A zero length string indicates no information availab…	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.2.1.10.38.2.1.1.10

This table contains the list of
encapsulations used to communicate with a
peer.  This table has two indexes, the first
identifies the peer, the second
distinguishes encapsulation types.
          
The first index identifies the corresponding
entry in the mioxPeerTable.  The second
index gives the priority of the different
encapsulations.
          
The encapsulation types are ordered in
priority order.  For calling a peer, the
first entry (mioxPeerEncIndex of 1) is tried
first.  If the call doesn't succeed because
the remote host clears the call due to
incompatible call user data, the next entry
in the list is tried.  Each entry is tried
until the list is exhausted.
          
For answering a call, the encapsulation type
requested by the peer must be found the list
or the call will be refused.  If there are
no entries in this table for a peer, all
call requests from the peer will be refused.
          
Objects in this table can only be set when
the mioxPeerStatus object with the same
index has a value of underCreation.  When
that status object is set to invalid and
deleted, the entry in this table with that
peer index must also be deleted.

mioxPeerEncEntry row .1.3.6.1.2.1.10.38.2.2.1

Per connection information.

Indexes

mioxPeerIndex mioxPeerEncIndex

Column	Syntax	OID
mioxPeerEncIndexmandatory The second index in the table which distinguishes different encapsulation types.	RFC1381-MIBPositiveInteger Type Constraints: range: 0..2147483647	.1.3.6.1.2.1.10.38.2.2.1.1
mioxPeerEncTypemandatory The value of the encapsulation type. For IP encapsulation this will have a value of 204 (hex CC). For SNAP encapsulated packets, this will have a value of 128 (hex 80). For CLNP, ISO 8473, this will have a value of 1…	Integer32r/w Constraints: range: 0-256	.1.3.6.1.2.1.10.38.2.2.1.2