 g6TrapFactoryReset
| .1.3.6.1.4.1.3181.10.6.1.1.10 | Configuration factory reset is executed via local push button on the device. |
g6TrapIncomingAlert
| .1.3.6.1.4.1.3181.10.6.1.1.100 | Externally received HTTP_GET_REQUEST or received SNMP TRAP. |
g6TrapCableTerminationEstablished
| .1.3.6.1.4.1.3181.10.6.1.1.101 | Cable termination established. Possible reason: A terminated remote device was connected to the cable. |
g6TrapCableTerminationLost
| .1.3.6.1.4.1.3181.10.6.1.1.102 | Cable termination lost. Possible reason: A terminated remote device was disconnected from the cable or the cable was locally unplugged. |
g6TrapTerminalServerConnected
| .1.3.6.1.4.1.3181.10.6.1.1.103 | Terminal server connected foreign host to local serial port. |
g6TrapTerminalServerDisconnected
| .1.3.6.1.4.1.3181.10.6.1.1.104 | Terminal server disconnected foreign host from local serial port. |
g6TrapTerminalServerFail
| .1.3.6.1.4.1.3181.10.6.1.1.105 | Terminal server failed in connecting foreign host to local serial port. |
g6TrapSensorGroupChange
| .1.3.6.1.4.1.3181.10.6.1.1.108 | Sensor group values have changed. |
g6TrapConfigurationLoaded
| .1.3.6.1.4.1.3181.10.6.1.1.11 | All or a specific configuration file(s) has been restored and activated. |
g6TrapActorGroupChangeRequest
| .1.3.6.1.4.1.3181.10.6.1.1.110 | Actor group is requested to change to a new value. |
g6TrapRegisterSmartDevice
| .1.3.6.1.4.1.3181.10.6.1.1.111 | A new smart device is registered. |
g6TrapUpdateSmartDevice
| .1.3.6.1.4.1.3181.10.6.1.1.112 | A smart device has changed its status. |
g6TrapRegisterSmartAttribute
| .1.3.6.1.4.1.3181.10.6.1.1.115 | A new smart attribute is registered. |
g6TrapUnregisterSmartDevice
| .1.3.6.1.4.1.3181.10.6.1.1.117 | A smart device is unregistered. |
g6TrapUnregisterSmartAttribute
| .1.3.6.1.4.1.3181.10.6.1.1.118 | A smart attribute is unregistered. |
g6TrapSingleActorChange
| .1.3.6.1.4.1.3181.10.6.1.1.119 | An individual actor is set to a new value. |
g6TrapChangeConfig
| .1.3.6.1.4.1.3181.10.6.1.1.12 | A configuration parameter has been modified and activated. |
g6TrapActorGroupChanged
| .1.3.6.1.4.1.3181.10.6.1.1.120 | An actor group has changed to a new value. |
g6TrapSmartOfficeInitializing
| .1.3.6.1.4.1.3181.10.6.1.1.121 | Smart Office is being initialized. |
g6TrapSmartOfficeStarted
| .1.3.6.1.4.1.3181.10.6.1.1.122 | Smart Office is started and ready. |
g6TrapSmartOfficeStopped
| .1.3.6.1.4.1.3181.10.6.1.1.123 | Smart Office is being stopped. |
g6TrapSmartOfficeError
| .1.3.6.1.4.1.3181.10.6.1.1.124 | A Smart Office error has occured. |
g6TrapOtdrMeasurements
| .1.3.6.1.4.1.3181.10.6.1.1.125 | An OTDR measurement has taken place and detected a change in the optical characteristics of the cable. |
g6TrapChangeOfflineConfig
| .1.3.6.1.4.1.3181.10.6.1.1.13 | An offline configuration parameter has been modified. The running system is not affected. |
g6TrapActionResponse
| .1.3.6.1.4.1.3181.10.6.1.1.14 | Not a customer event. Contains the reponse string to an action command. |
g6TrapCommitConfig
| .1.3.6.1.4.1.3181.10.6.1.1.15 | Not a customer event. Recent configuration changes should now be stored and activated. |
g6TrapPowerSupplyOk
| .1.3.6.1.4.1.3181.10.6.1.1.16 | Power supply has been restored. Applies to units with redundant supplies only. |
g6TrapPowerSupplyFail
| .1.3.6.1.4.1.3181.10.6.1.1.17 | Power supply has FAILED. Applies to units with redundant supplies only. |
g6TrapLogin
| .1.3.6.1.4.1.3181.10.6.1.1.18 | An operator has logged onto the system. |
g6TrapLogout
| .1.3.6.1.4.1.3181.10.6.1.1.19 | An operator has logged off from the system. |
g6TrapLoginAttempt
| .1.3.6.1.4.1.3181.10.6.1.1.20 | An operator login has failed due to invalid login or password. |
g6TrapLinkUp
| .1.3.6.1.4.1.3181.10.6.1.1.21 | A port has gone online and is ready to transport data. |
g6TrapLinkDown
| .1.3.6.1.4.1.3181.10.6.1.1.22 | A port has gone down. Data transport on this port is no longer possible. |
g6TrapRingNormal
| .1.3.6.1.4.1.3181.10.6.1.1.23 | A ring is back to normal operation. Protection is available. |
g6TrapRingBackup
| .1.3.6.1.4.1.3181.10.6.1.1.24 | A ring has switched to the redundant backup path. |
g6TrapRingFailure
| .1.3.6.1.4.1.3181.10.6.1.1.25 | A ring has FAILED. Normal and backup path are unavailable. |
g6TrapCouplingState
| .1.3.6.1.4.1.3181.10.6.1.1.26 | Coupling controller state change. |
g6TrapTemperatureOk
| .1.3.6.1.4.1.3181.10.6.1.1.27 | Operating temperature is within acceptable limits. |
g6TrapTemperatureWarning
| .1.3.6.1.4.1.3181.10.6.1.1.28 | Operating temperature is low or high. Performance my be degraded. Do not run under this condition for prolonged time. |
g6TrapTemperatureFailure
| .1.3.6.1.4.1.3181.10.6.1.1.29 | Operating temperature is too low or too high. The unit may switch itself off to protect itself anytime soon. |
g6TrapDebug
| .1.3.6.1.4.1.3181.10.6.1.1.3 | Internal Debug Messages. |
g6TrapMacAccepted
| .1.3.6.1.4.1.3181.10.6.1.1.30 | A MAC address has been authorized. |
g6TrapMacAuthError
| .1.3.6.1.4.1.3181.10.6.1.1.31 | MAC authorization error. |
g6TrapMacBlocked
| .1.3.6.1.4.1.3181.10.6.1.1.32 | A MAC address has been blocked. |
g6TrapMacBlockedVlan
| .1.3.6.1.4.1.3181.10.6.1.1.33 | A MAC address has been blocked. Assigned to unauthorized VLAN. |
g6TrapMacDisconnected
| .1.3.6.1.4.1.3181.10.6.1.1.34 | A MAC address has been disconnected. |
g6TrapSfpInserted
| .1.3.6.1.4.1.3181.10.6.1.1.35 | An SFP (pluggable optical or electrical port module) has been inserted. |
g6TrapSfpRemoved
| .1.3.6.1.4.1.3181.10.6.1.1.36 | An SFP (pluggable optical or electrical port module) has been removed from the device. |
g6TrapSfpSignalPresent
| .1.3.6.1.4.1.3181.10.6.1.1.37 | An SFP (pluggable optical or electrical port module) has detected an optical receive signal. |
g6TrapSfpSignalLoss
| .1.3.6.1.4.1.3181.10.6.1.1.38 | An SFP (pluggable optical or electrical port module) has lost its receive signal. |
g6TrapSfpSignalChange
| .1.3.6.1.4.1.3181.10.6.1.1.39 | An SFP (pluggable optical or electrical port module) has detected a change in the optical input power level. |
g6TrapAliveTest
| .1.3.6.1.4.1.3181.10.6.1.1.4 | Can be used to check out event and notification system with no effect to the system operation. |
g6TrapSfpMismatch
| .1.3.6.1.4.1.3181.10.6.1.1.40 | An SFP (pluggable optical or electrical port module) has been inserted which does not match the required feature(s). |
g6TrapPoeConnect
| .1.3.6.1.4.1.3181.10.6.1.1.41 | A POE (Power over Ethernet) device is connected an powered. |
g6TrapPoeVoltage
| .1.3.6.1.4.1.3181.10.6.1.1.42 | The POE (Power over Ethernet) operating voltage is too low. |
g6TrapPoeError
| .1.3.6.1.4.1.3181.10.6.1.1.43 | A POE (Power over Ethernet) error has occurred. |
g6TrapPoeClassmismatch
| .1.3.6.1.4.1.3181.10.6.1.1.44 | A POE (Power over Ethernet) powered device requires a power level not enabled or available at this port. |
g6TrapPoeDisconnect
| .1.3.6.1.4.1.3181.10.6.1.1.45 | A POE (Power over Ethernet) device has been disconnected. |
g6TrapNtpFail
| .1.3.6.1.4.1.3181.10.6.1.1.46 | The NTP client (Network Time Protocol) has a failure condition. |
g6TrapHardwareError
| .1.3.6.1.4.1.3181.10.6.1.1.47 | A hardware error has been detected. |
g6TrapSoftwareError
| .1.3.6.1.4.1.3181.10.6.1.1.48 | A software error has occured. |
g6TrapButtonPressed
| .1.3.6.1.4.1.3181.10.6.1.1.49 | System button pressed. |
g6TrapFirmwareUpdateOk
| .1.3.6.1.4.1.3181.10.6.1.1.5 | Firmware installation has successfully taken place. |
g6TrapFirmwareUpdateFail
| .1.3.6.1.4.1.3181.10.6.1.1.6 | Firmware installation has FAILED. |
g6TrapInputSignalNormal
| .1.3.6.1.4.1.3181.10.6.1.1.67 | An external input signal has been deactivated and returned to normal state. |
g6TrapInputSignalActivated
| .1.3.6.1.4.1.3181.10.6.1.1.68 | An external input signal has been activated. |
g6TrapOutputRelayNormal
| .1.3.6.1.4.1.3181.10.6.1.1.69 | A relay output signal has been deactivated and returned to normal state. |
g6TrapLicenseViolation
| .1.3.6.1.4.1.3181.10.6.1.1.7 | Firmware is used for which no license has been granted. Please contact sales representant. |
g6TrapOutputRelayActivated
| .1.3.6.1.4.1.3181.10.6.1.1.70 | An external input signal has been deactivated and returned to normal state. |
g6TrapPacketIntercepted
| .1.3.6.1.4.1.3181.10.6.1.1.71 | Special filter has intercepted a data packet. |
g6TrapScriptUnitPositive
| .1.3.6.1.4.1.3181.10.6.1.1.72 | A positive unit related user defined event created by script or app. |
g6TrapScriptUnitNegative
| .1.3.6.1.4.1.3181.10.6.1.1.73 | A negative unit related user defined event created by script or app. |
g6TrapScriptPortPositive
| .1.3.6.1.4.1.3181.10.6.1.1.74 | A positive port related user defined event created by script or app. |
g6TrapScriptPortNegative
| .1.3.6.1.4.1.3181.10.6.1.1.75 | A negative port related user defined event created by script or app. |
g6TrapScriptExecuted
| .1.3.6.1.4.1.3181.10.6.1.1.76 | A user defined script execution started. |
g6TrapScriptError
| .1.3.6.1.4.1.3181.10.6.1.1.77 | Script execution error of a user defined script. |
g6TrapLoopRemoved
| .1.3.6.1.4.1.3181.10.6.1.1.78 | Cable loop removed. Port unblocked. |
g6TrapLoopDetected
| .1.3.6.1.4.1.3181.10.6.1.1.79 | Cable loop detected. Port blocked. |
g6TrapColdStart
| .1.3.6.1.4.1.3181.10.6.1.1.8 | The device has booted. Data transmission was interrupted. |
g6TrapLacpConnect
| .1.3.6.1.4.1.3181.10.6.1.1.80 | Aggregated link established. |
g6TrapLacpDisconnect
| .1.3.6.1.4.1.3181.10.6.1.1.81 | Aggregated link down. |
g6TrapAppInstalled
| .1.3.6.1.4.1.3181.10.6.1.1.82 | App installed ok. |
g6TrapAppInstallationFail
| .1.3.6.1.4.1.3181.10.6.1.1.83 | App installation has failed. |
g6TrapAppDeinstalled
| .1.3.6.1.4.1.3181.10.6.1.1.84 | App deinstalled. |
g6TrapCableChangeDetected
| .1.3.6.1.4.1.3181.10.6.1.1.85 | Change in cable termination detected. |
g6TrapImplausibleConfig
| .1.3.6.1.4.1.3181.10.6.1.1.86 | Implausible configuration detected |
g6TrapNetworkAttack
| .1.3.6.1.4.1.3181.10.6.1.1.87 | Potential network attack detected |
g6TrapModuleInserted
| .1.3.6.1.4.1.3181.10.6.1.1.88 | A hardware module has been inserted into the system. |
g6TrapModuleRemoved
| .1.3.6.1.4.1.3181.10.6.1.1.89 | A hardware module has been removed from the system. |
g6TrapWarmStart
| .1.3.6.1.4.1.3181.10.6.1.1.9 | The device has (partially) booted without interupting data transmission services. |
g6TrapMsp1000UnitPositive
| .1.3.6.1.4.1.3181.10.6.1.1.90 | A positive MSP1000 unit related event has occured. |
g6TrapMsp1000UnitNegative
| .1.3.6.1.4.1.3181.10.6.1.1.91 | A negative MSP1000 unit related event has occured. |
g6TrapMsp1000PortPositive
| .1.3.6.1.4.1.3181.10.6.1.1.92 | A positive MSP1000 port related event has occured. |
g6TrapMsp1000PortNegative
| .1.3.6.1.4.1.3181.10.6.1.1.93 | A negative MSP1000 port related event has occured. |
g6TrapBackupTerminated
| .1.3.6.1.4.1.3181.10.6.1.1.94 | Backup path not required. |
g6TrapBackupEngaged
| .1.3.6.1.4.1.3181.10.6.1.1.95 | Backup path has been engaged. |
g6TrapBackupFailure
| .1.3.6.1.4.1.3181.10.6.1.1.96 | Backup path could not be completed. |
g6TrapFanOk
| .1.3.6.1.4.1.3181.10.6.1.1.97 | Cooling fan operating normally. |
g6TrapFanDegraded
| .1.3.6.1.4.1.3181.10.6.1.1.98 | Cooling fan degraded. Replace fan soon. |
g6TrapFanFailure
| .1.3.6.1.4.1.3181.10.6.1.1.99 | Cooling fan failed. Replace fan immediately |
microsens 
g6TrapObjEventName