ME1200-TT-LOOP-MIB Table View

This is a table of created instance configuration parameters

me1200TtLoopConfigInstanceEntry row .1.3.6.1.4.1.9.9.815.1.128.1.2.1.1

This is a created instance configuration parameters. Not all parameters
can be changed

Indexes

me1200TtLoopConfigInstanceId

Column	Syntax	OID
me1200TtLoopConfigInstanceId The TT_LOOP instance ID	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.9.9.815.1.128.1.2.1.1.1
me1200TtLoopConfigInstanceName Instance name	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.9.9.815.1.128.1.2.1.1.2
me1200TtLoopConfigInstanceType The Traffic Test loop type. Currently only MAC Loop is supported	ME1200TtLoopInstanceTyper/w Type Values: 0 macLoop 1 oamLoop	.1.3.6.1.4.1.9.9.815.1.128.1.2.1.1.3
me1200TtLoopConfigInstanceDirection The instance direction. Currently only Facility Loop is supported	ME1200TtLoopInstanceDirectionr/w Type Values: 0 facility 1 terminal	.1.3.6.1.4.1.9.9.815.1.128.1.2.1.1.4
me1200TtLoopConfigInstanceDomain The instance domain. Currently only Port domain is supported	ME1200TtLoopInstanceDomainr/w Type Values: 0 port 1 evc 2 vlan	.1.3.6.1.4.1.9.9.815.1.128.1.2.1.1.5
me1200TtLoopConfigInstanceFlow The flow instance (VLAN - EVC).	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.815.1.128.1.2.1.1.6
me1200TtLoopConfigInstancePort The instance residence port.	ME1200-TCME1200InterfaceIndexr/w Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.9.9.815.1.128.1.2.1.1.7
me1200TtLoopConfigInstanceLevel The instance MEG level	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.815.1.128.1.2.1.1.8
me1200TtLoopConfigInstanceSubscriber The EVC OAM loop subscriber mode	ME1200TtLoopInstanceSubscriberr/w Type Values: 0 none 1 all 2 test	.1.3.6.1.4.1.9.9.815.1.128.1.2.1.1.9
me1200TtLoopConfigInstanceAdminState The instance Administrative state.	ME1200TtLoopInstanceAdminStater/w Type Values: 0 adminDisabled 1 adminEnabled	.1.3.6.1.4.1.9.9.815.1.128.1.2.1.1.10
me1200TtLoopConfigInstanceAction Action	ME1200-TCME1200RowEditorStater/w	.1.3.6.1.4.1.9.9.815.1.128.1.2.1.1.100

This table enables the user to configure the MEF 46 Latching Loopback
parameters for the created TT-LOOP instances. Entries in the table will
be automatically created or deleted when the corresponding entry in the
ttLoopConfigInstanceTable is created or deleted, but the content will
only be valid if the Latching Loopback function has been enabled for
the TT-LOOP instance.

me1200TtLoopLlConfigInstanceEntry row .1.3.6.1.4.1.9.9.815.1.128.1.2.3.1

This entry contains all configurable Latching Loopback parameters for a
TT-LOOP instance.

Indexes

me1200TtLoopLlConfigInstanceId

Column	Syntax	OID
me1200TtLoopLlConfigInstanceId The TT_LOOP instance ID	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.9.9.815.1.128.1.2.3.1.1
me1200TtLoopLlConfigInstanceEnable Setting this object to 'true' enables the use of Latching Loopback functionality for an existing TT-LOOP instance. If the value is 'false' the instance works as a static TT-LOOP instance.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.815.1.128.1.2.3.1.2
me1200TtLoopLlConfigInstanceMepId The MEP ID associated with the TT-LOOP instance. If the Latching Loopback function is enabled using the 'Enable' object above then this value must be a valid MEP ID value. The MEP may however not be created yet.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.815.1.128.1.2.3.1.3
me1200TtLoopLlConfigInstanceSourceMac The source MAC address from which to accept Latching Loopback Message (LLM) PDUs for this instance.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.9.9.815.1.128.1.2.3.1.4

This is a table of created instance status

me1200TtLoopStatusInstanceEntry row .1.3.6.1.4.1.9.9.815.1.128.1.3.1.1

This is a created instance status

Indexes

me1200TtLoopStatusInstanceId

Column	Syntax	OID
me1200TtLoopStatusInstanceId The TT_LOOP instance ID	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.9.9.815.1.128.1.3.1.1.1
me1200TtLoopStatusInstanceOperState The instance Operational state.	ME1200TtLoopInstanceOperState Type Values: 0 operDown 1 operUp 2 operInact	.1.3.6.1.4.1.9.9.815.1.128.1.3.1.1.2

This table enables the user to view the MEF 46 Latching Loopback status
for the created TT-LOOP instances. Entries in the table will be
automatically created or deleted when the corresponding entry in the
ttLoopConfigInstanceTable is created or deleted.

me1200TtLoopLlStatusInstanceEntry row .1.3.6.1.4.1.9.9.815.1.128.1.3.2.1

This entry contains all status Latching Loopback parameters for a
TT-LOOP instance.

Indexes

me1200TtLoopLlStatusInstanceId

Column	Syntax	OID
me1200TtLoopLlStatusInstanceId The TT_LOOP instance ID	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.9.9.815.1.128.1.3.2.1.1
me1200TtLoopLlStatusInstanceRemainExpTimer The remaining expiry timer in seconds. This value is non-zero if the operational state of the Latching Loopback instance is 'up' (aka. 'Active' in MEF 46 terms). It will be zero if the operational state is not 'up' or i…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.815.1.128.1.3.2.1.2