Standard view Table view

MAP-E-MIB

        This MIB module is defined for management of objects for
MAP-E BRs or CEs.
        
Copyright (c) 2018 IETF Trust and the persons identified as
authors of the code.  All rights reserved.
        
Redistribution and use in source and binary forms, with or
without modification, is permitted pursuant to, and subject to
the license terms contained in, the Simplified BSD License set
forth in Section 4.c of the IETF Trust's Legal Provisions
Relating to IETF Documents
(https://trustee.ietf.org/license-info).
Source file
MAP-E-MIB
Last revised
Identity
mapMIB
Base OID
1.3.6.1.2.1.242
Imported Objects
IF-MIB ifIndex
INET-ADDRESS-MIB InetAddressIPv4 InetAddressIPv6 InetAddressPrefixLength
SNMPv2-CONF MODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMI Counter64 mib-2 MODULE-IDENTITY OBJECT-TYPE Unsigned32
SNMPv2-TC TEXTUAL-CONVENTION
Net-SNMP examples using the rfc MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'MAP-E-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'MAP-E-MIB::mapMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MAP-E-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MAP-E-MIB::mapMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (24)
mapMIB
.1.3.6.1.2.1.242
mapMIBObjects
.1.3.6.1.2.1.242.1
mapRule
.1.3.6.1.2.1.242.1.1
mapRuleTable
.1.3.6.1.2.1.242.1.1.1
mapRuleEntry
IF-MIBifIndexmapRuleID
 .1.3.6.1.2.1.242.1.1.1.1
mapRuleID
Unsigned32
 .1.3.6.1.2.1.242.1.1.1.1.1
mapRuleEALen
Unsigned32
 .1.3.6.1.2.1.242.1.1.1.1.10
mapRuleType
RuleType
 .1.3.6.1.2.1.242.1.1.1.1.11
mapRuleIPv6Prefix
INET-ADDRESS-MIBInetAddressIPv6
 .1.3.6.1.2.1.242.1.1.1.1.2
mapRuleIPv6PrefixLen
INET-ADDRESS-MIBInetAddressPrefixLength
 .1.3.6.1.2.1.242.1.1.1.1.3
mapRuleIPv4Prefix
INET-ADDRESS-MIBInetAddressIPv4
 .1.3.6.1.2.1.242.1.1.1.1.4
mapRuleIPv4PrefixLen
INET-ADDRESS-MIBInetAddressPrefixLength
 .1.3.6.1.2.1.242.1.1.1.1.5
mapRuleBRIPv6Address
INET-ADDRESS-MIBInetAddressIPv6
 .1.3.6.1.2.1.242.1.1.1.1.6
mapRulePSID
RulePSID
 .1.3.6.1.2.1.242.1.1.1.1.7
mapRulePSIDLen
Unsigned32
 .1.3.6.1.2.1.242.1.1.1.1.8
mapRuleOffset
Unsigned32
 .1.3.6.1.2.1.242.1.1.1.1.9
mapSecurityCheck
.1.3.6.1.2.1.242.1.2
mapSecurityCheckTable
.1.3.6.1.2.1.242.1.2.1
mapSecurityCheckEntry
IF-MIBifIndex
 .1.3.6.1.2.1.242.1.2.1.1
mapSecurityCheckInvalidv4
SNMPv2-SMICounter64
 .1.3.6.1.2.1.242.1.2.1.1.1
mapSecurityCheckInvalidv6
SNMPv2-SMICounter64
 .1.3.6.1.2.1.242.1.2.1.1.2
mapMIBConformance
.1.3.6.1.2.1.242.2
mapMIBCompliances
.1.3.6.1.2.1.242.2.1
mapMIBGroups
.1.3.6.1.2.1.242.2.2
Dependencies (7) 5 direct · 2 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. SNMPv2-TCrfc
  3. IANAifType-MIBrfc
  4. SNMPv2-CONFrfc
  5. SNMPv2-MIBrfc
  6. IF-MIBrfc
  7. INET-ADDRESS-MIBrfc
  8. MAP-E-MIBrfcselected
Type Definitions (2)
RulePSID
OctetString range: 2
RuleType
Enumeration
bmr(1)
fmr(2)
bmrAndfmr(3)
Conformance Groups (2)
mapMIBRuleGroup
mapRuleIPv6Prefix mapRuleIPv6PrefixLen mapRuleIPv4Prefix mapRuleIPv4PrefixLen mapRuleBRIPv6Address mapRulePSID mapRulePSIDLen mapRuleOffset mapRuleEALen mapRuleType
The group of objects used to describe the MAP-E mapping
rule.
 .1.3.6.1.2.1.242.2.2.1
mapMIBSecurityGroup
mapSecurityCheckInvalidv4 mapSecurityCheckInvalidv6
The group of objects used to provide information on the
MAP-E security checks.
 .1.3.6.1.2.1.242.2.2.2
Compliance Statements (1)

OID .1.3.6.1.2.1.242.2.1.1
Describes the minimal requirements for conformance
to the MAP-E MIB.
Required groups
mandatory mapMIBRuleGroup
mandatory mapMIBSecurityGroup