MAIPU-CBQOS-MIB Table View

This table describes the logical interfaces/media types and the 
policymap that are attached to it.

mpCbQosServicePolicyEntry row .1.3.6.1.4.1.5651.6.2.3.4.1.1.1.1

Each entry in this table describes to which a logical interface
a given policymap is attached. Depending on the logical
interface/media type, some fields may have meaningful values, and
some may not. Please see each …

Indexes

mpCbQosPolicyIndex

Column	Syntax	OID
mpCbQosPolicyIndex An arbitrary (system-assigned) index for all service policies (PolicyMap that has been attached to a given logical interface).	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5651.6.2.3.4.1.1.1.1.1
mpCbQosIfType This describes the logical interface/media type to which this service policy is attached.	Enumeration Enumerated Values: 1 mainInterface 2 subInterface 3 frDLCI 4 atmPVC 5 controlPlane 6 vlanPort	.1.3.6.1.4.1.5651.6.2.3.4.1.1.1.1.2
mpCbQosPolicyDirection This indicates the direction of traffic for which this service policy is applied.	Enumeration Enumerated Values: 1 input 2 output	.1.3.6.1.4.1.5651.6.2.3.4.1.1.1.1.3
mpCbQosIfIndex ifIndex for the interface to which this service is attached.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5651.6.2.3.4.1.1.1.1.4
mpCbQosFrDLCI DLCI for the FRVC to which this service is attached. This field only make sense if the service policy is attached to a Frame Relay DLCI.	Unsigned32 Constraints: range: 0-1007	.1.3.6.1.4.1.5651.6.2.3.4.1.1.1.1.5
mpCbQosAtmVPI VPI for the ATMVC to which this service is attached. This field only make sense if the service policy is attached to a ATM VC.	Unsigned32 Constraints: range: 0-4095	.1.3.6.1.4.1.5651.6.2.3.4.1.1.1.1.6
mpCbQosAtmVCI VCI for the ATMVC to which this service is attached. This field only make sense if the service policy is attached to a ATM VC.	Unsigned32 Constraints: range: 0-65535	.1.3.6.1.4.1.5651.6.2.3.4.1.1.1.1.7
mpCbQosEntityIndex In cases where the policy is attached to an entity e.g. control-plane, this object represents the entity physical index of the entity to which the policy has been attached. A value zero may be returned if the policy …	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5651.6.2.3.4.1.1.1.1.8
mpCbQosVlanIndex If the service policy is attached to a particular vlan on a trunk or multi-vlan access port, then this object specifies the corresponding VLAN. In all other cases the value of this object is '0'.	Unsigned32 Constraints: range: 0-4094	.1.3.6.1.4.1.5651.6.2.3.4.1.1.1.1.9

This table describes the service polices that are attached to 
main and sub interfaces.

mpCbQosInterfacePolicyEntry row .1.3.6.1.4.1.5651.6.2.3.4.1.2.1.1

Using ifIndex and Direction, each unique index pair translates
to a service policy that is attached to a main/sub interface, for
particular traffic direction.

Indexes

ifIndex mpCbQosPolicyDirection

Column	Syntax	OID
mpCbQosIFPolicyIndex An arbitrary (system-assigned) index for all Service Policies. This is identical to mpCbQosPolicyIndex.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5651.6.2.3.4.1.2.1.1.1

This table describes the service polices that are attached to 
Frame Relay DLCIs.

mpCbQosFrameRelayPolicyEntry row .1.3.6.1.4.1.5651.6.2.3.4.1.3.1.1

Using ifIndex, FR DLCI, and Direction, each unique index
combination translates to a service policy that is attached to a
FR DLCI, for particular traffic direction.

Indexes

ifIndex mpCbQosFrDLCI mpCbQosPolicyDirection

Column	Syntax	OID
mpCbQosFRPolicyIndex An arbitrary (system-assigned) index for all Service Policies. This is identical to mpCbQosPolicyIndex.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5651.6.2.3.4.1.3.1.1.1

This table describes the policies that are attached to a ATM PVC.

mpCbQosATMPVCPolicyEntry row .1.3.6.1.4.1.5651.6.2.3.4.1.4.1.1

Using ifIndex, VPI, VCI, and Direction, each unique index
combination translates to a service policy that is attached to a
ATM VC, for particular traffic direction.

Indexes

ifIndex mpCbQosAtmVPI mpCbQosAtmVCI mpCbQosPolicyDirection

Column	Syntax	OID
mpCbQosATMPVCPolicyIndex An arbitrary (system-assigned) index for all Service Policies. This is identical to mpCbQosPolicyIndex.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5651.6.2.3.4.1.4.1.1.1

This table specifies QoS objects (classmap, policymap, match 
statements, and actions) hierarchy. This table also provide 
relationship between each PolicyIndex/ObjectsIndex pair and the 
ConfigIndex. ConfigIndex is essential for querying any 
configuration tables.

mpCbQosObjectsEntry row .1.3.6.1.4.1.5651.6.2.3.4.1.5.1.1

A QoS object entry. Objects covered in this table are PolicyMap,
ClassMap, Match Statements, and Actions. Each entry is indexed by
system-generated mpCbQosPolicyIndex, and mpCbQosObjectsIndex,
which represents a runt…

Indexes

mpCbQosPolicyIndex mpCbQosObjectsIndex

Column	Syntax	OID
mpCbQosObjectsIndex An arbitrary (system-assigned) instance specific index for mpCbQosObjectsEntry.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5651.6.2.3.4.1.5.1.1.1
mpCbQosConfigIndex An arbitrary (system-assigned) config (instance independent) index for each Object. Each objects having the same configuration share the same config index.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5651.6.2.3.4.1.5.1.1.2
mpCbQosObjectsType The type of the QoS object.	Enumeration Enumerated Values: 1 policymap 2 classmap 3 matchStatement 4 queueing 5 randomDetect 6 trafficShaping 7 police 8 set	.1.3.6.1.4.1.5651.6.2.3.4.1.5.1.1.3
mpCbQosParentObjectsIndex The parent instance index of a QoS object. For a ClassMap, the parent index would be the index of the attached PolicyMap. For a Match Statement, the parent index would be the index of the ClassMap that uses this Matc…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5651.6.2.3.4.1.5.1.1.4

This table specifies Policymap configuration information.

mpCbQosPolicyMapCfgEntry row .1.3.6.1.4.1.5651.6.2.3.4.1.6.1.1

Each entry in this table describes configuration information
about a policymap. The information includes: Name, and it's
description.

Indexes

mpCbQosConfigIndex

Column	Syntax	OID
mpCbQosPolicyMapName Name of the Policymap.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.5651.6.2.3.4.1.6.1.1.1
mpCbQosPolicyMapDesc Description of the PolicyMap.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.5651.6.2.3.4.1.6.1.1.2

This table specifies ClassMap configuration information.

mpCbQosCMCfgEntry row .1.3.6.1.4.1.5651.6.2.3.4.1.7.1.1

Each entry in this table describes configuration information
about a classmap. The information includes: Name, and it's
description and whether it is a Match-All or Match-Any class.

Indexes

mpCbQosConfigIndex

Column	Syntax	OID
mpCbQosCMName Name of the Classmap.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.5651.6.2.3.4.1.7.1.1.1
mpCbQosCMDesc Description of the Classmap.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.5651.6.2.3.4.1.7.1.1.2
mpCbQosCMInfo Match all vs Match any in a given class.	Enumeration Enumerated Values: 1 none 2 matchAll 3 matchAny	.1.3.6.1.4.1.5651.6.2.3.4.1.7.1.1.3

This table specifies ClassMap configuration information.

mpCbQosMatchStmtCfgEntry row .1.3.6.1.4.1.5651.6.2.3.4.1.8.1.1

Each entry in this table describes configuration information
about a MatchStatement. The information includes: Name, and
whether it is a Match or Match-Not tatement. This table contains
configuration information only…

Indexes

mpCbQosConfigIndex

Column	Syntax	OID
mpCbQosMatchStmtName Name of the Match Statement.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.5651.6.2.3.4.1.8.1.1.1
mpCbQosMatchStmtInfo Match vs Match Not in a given class.	Enumeration Enumerated Values: 1 none 2 matchNot	.1.3.6.1.4.1.5651.6.2.3.4.1.8.1.1.2

This table specifies Queueing Action configuration information.

mpCbQosQueueingCfgEntry row .1.3.6.1.4.1.5651.6.2.3.4.1.9.1.1

Each entry in this table describes configuration information
about a queueing action. The information includes: Bandwidth,
Units, Flow Enabled, Priority Enabled, and Q size.

Indexes

mpCbQosConfigIndex

Column	Syntax	OID
mpCbQosQueueingCfgBandwidth The type of bandwidth configuration value represented by this object is indicated by the value of mpCbQosQueueingCfgBandwidthUnits for this entry. If the mpCbQosQueueingCfgBandwidthUnits value is 'kbps(1)' or 'perce…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5651.6.2.3.4.1.9.1.1.1
mpCbQosQueueingCfgBandwidthUnits Units of the accompanying mpCbQosQueueingCfgbandwidth parameter.	Enumeration Enumerated Values: 1 kbps 2 percentage 3 percentageRemaining 4 ratioRemaining	.1.3.6.1.4.1.5651.6.2.3.4.1.9.1.1.2
mpCbQosQueueingCfgFlowEnabled Boolean to indicate if flow-based fair-queue is enabled for this class.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.5651.6.2.3.4.1.9.1.1.3
mpCbQosQueueingCfgPriorityEnabled Boolean to indicate if low latency queueing (priority) is enabled for this class.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.5651.6.2.3.4.1.9.1.1.4
mpCbQosQueueingCfgDynamicQNumber Number of dynamic queues supported when flow-based fair-queue is in use.	Integer32 Constraints: range: 0-32768	.1.3.6.1.4.1.5651.6.2.3.4.1.9.1.1.5
mpCbQosQueueingCfgPrioBurstSize In the priority queue, this is the number of bytes allowed in a single burst. This parameter only makes sense if Priority is enabled.	BytesSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5651.6.2.3.4.1.9.1.1.6
mpCbQosQueueingCfgQLimitUnits Represents the unit type of mpCbQosQueueingCfgAggregateQLimit and mpCbQosQueueingCfgIndividualQLimit objects.	Enumeration Enumerated Values: 1 packets 2 bytes 3 cells 4 ms 5 us	.1.3.6.1.4.1.5651.6.2.3.4.1.9.1.1.7
mpCbQosQueueingCfgAggregateQLimit Maximum allowed queue size for all the individual queues associated with this class. When the queue size exceed this value, the packets will be dropped.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5651.6.2.3.4.1.9.1.1.8
mpCbQosQueueingCfgAggrQLimitTime Maximum allowed queue size in milli-seconds for all individual queues associated with this class. It is internally converted to bytes by using the bandwidth that is available for the class.	milli-secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5651.6.2.3.4.1.9.1.1.9
mpCbQosQueueingCfgIndividualQLimit Maximum number of units that can be held in an individual Flow-based fair-queue associated with this class before it drops packets. This field only makes sense in the context of Flow-based fair-queueing.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5651.6.2.3.4.1.9.1.1.10

This table specifies WRED Action configuration information.

mpCbQosREDCfgEntry row .1.3.6.1.4.1.5651.6.2.3.4.1.10.1.1

Each entry in this table describes configuration information
about a WRED Action. The table holds global (per traffic class)
configuration like: Expon Weight and Mean Q size.

Indexes

mpCbQosConfigIndex

Column	Syntax	OID
mpCbQosREDCfgExponWeight The decay factor for the queue average calculation. The decay factor is equal to raising 2 to the power of N, where N could be up to 16. The smaller the number, the faster it decays.	Integer32 Constraints: range: 1-16	.1.3.6.1.4.1.5651.6.2.3.4.1.10.1.1.1
mpCbQosREDCfgDscpPrec The Classification mechanism used by RED.	Enumeration Enumerated Values: 1 precedence 2 dscp 3 discardClass 4 l2Cos 5 atmClp 6 mplsExp 7 redDefault 8 redUserDefault	.1.3.6.1.4.1.5651.6.2.3.4.1.10.1.1.2
mpCbQosREDCfgECNEnabled Boolean to indicate if explicit congestion notification enabled for this class.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.5651.6.2.3.4.1.10.1.1.3

This table specifies WRED Action configuration information on a 
per IP precedence basis.

mpCbQosREDClassCfgEntry row .1.3.6.1.4.1.5651.6.2.3.4.1.11.1.1

Each entry in this table describes configuration information
about a WRED Action. The table holds the per IP precedence based
WRED configuration parameters.

Indexes

mpCbQosConfigIndex mpCbQosREDValue

Column	Syntax	OID
mpCbQosREDValue The IP precedence or IP DSCP of this entry.	Integer32 Constraints: range: 0-63	.1.3.6.1.4.1.5651.6.2.3.4.1.11.1.1.1
mpCbQosREDCfgPktDropProb Denominator for the fraction of packets dropped when the average queue depth is MaxDepthThreshold. For example, if the denominator is 10, one out of every 10 packets is dropped when the average queue is at the MaxDep…	Integer32 Constraints: range: 1-65536	.1.3.6.1.4.1.5651.6.2.3.4.1.11.1.1.2
mpCbQosREDClassCfgMinThresholdUnit Represents the unit type to measure the RED thresholds. The objects covered is mpCbQosREDClassCfgMinThreshold.	Enumeration Enumerated Values: 1 packets 2 bytes 3 cells 4 ms 5 us	.1.3.6.1.4.1.5651.6.2.3.4.1.11.1.1.3
mpCbQosREDClassCfgMaxThresholdUnit Represents the unit type to measure the RED thresholds. The objects covered is mpCbQosREDClassCfgMaxThreshold.	Enumeration Enumerated Values: 1 packets 2 bytes 3 cells 4 ms 5 us	.1.3.6.1.4.1.5651.6.2.3.4.1.11.1.1.4
mpCbQosREDClassCfgMinThreshold The minimum WRED threshold value. When the average queue length reaches this number, WRED begins to drop packets according to RED Mechanism specificed in mpCbQosREDCfgDscpPrec.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5651.6.2.3.4.1.11.1.1.5
mpCbQosREDClassCfgMaxThreshold The maximum WRED threshold value. When the average queue length exceeds this number, WRED drops all packets according to RED Mechanism specificed in mpCbQosREDCfgDscpPrec.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5651.6.2.3.4.1.11.1.1.6
mpCbQosREDClassCfgMinThresholdTime The minimum WRED threshold value specified in milli-seconds. The milli-second value is internally converted to bytes by using the bandwidth that is available for the class.	milli-secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5651.6.2.3.4.1.11.1.1.7
mpCbQosREDClassCfgMaxThresholdTime The maximum WRED threshold value specified in milli-seconds. The milli-second value is internally converted to bytes by using the bandwidth that is available for the class.	milli-secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5651.6.2.3.4.1.11.1.1.8

This table specifies Police Action configuration information.

mpCbQosPoliceCfgEntry row .1.3.6.1.4.1.5651.6.2.3.4.1.12.1.1

Each entry in this table describes configuration information
about a Police Action. The table holds Policy configuration
parameters, such as rate, burst size, and actions based on
traffic rates.

Indexes

mpCbQosConfigIndex

Column	Syntax	OID
mpCbQosPoliceCfgRate64 The committed policing rate in bits/second. This is the sustained rate permitted by policing.	bits/secondUnsigned64	.1.3.6.1.4.1.5651.6.2.3.4.1.12.1.1.1
mpCbQosPoliceCfgBurstSize The amount of traffic, in bytes, in excess of the committed policing rate that will be permitted by the policing feature.	OctetsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5651.6.2.3.4.1.12.1.1.2
mpCbQosPoliceCfgExtBurstSize The amount of traffic, in bytes, in excess of the burst limit, which may be conditionally permitted by the policing feature. The probability that the traffic is not permitted increases as the received burst size incr…	OctetsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5651.6.2.3.4.1.12.1.1.3
mpCbQosPoliceCfgPir64 The committed policing rate in bits/second. This is the peak rate permitted by two rate policing.	bits/secondUnsigned64	.1.3.6.1.4.1.5651.6.2.3.4.1.12.1.1.4
mpCbQosPoliceCfgRateType The rate type that configured for CIR & PIR. 1 means rates are configured in bps. 2 means rates are configured in percentage. 3 means rates are configured in cps.	Enumeration Enumerated Values: 1 bps 2 percentage 3 cps	.1.3.6.1.4.1.5651.6.2.3.4.1.12.1.1.5
mpCbQosPoliceCfgPercentRateValue The committed policing rate in percentage. Its value is valid only when mpCbQosPoliceCfgRateType equals to 2.	% of Interface BandwidthUnsigned32 Constraints: range: 0-100	.1.3.6.1.4.1.5651.6.2.3.4.1.12.1.1.6
mpCbQosPoliceCfgPercentPirValue The peak policing rate in percentage. Its value is valid only when mpCbQosPoliceCfgRateType equals to 2.	% of Interface BandwidthUnsigned32 Constraints: range: 0-100	.1.3.6.1.4.1.5651.6.2.3.4.1.12.1.1.7
mpCbQosPoliceCfgCellRate The committed policing rate in cells/second. Its value is valid only when mpCbQosPoliceCfgRateType equals to 3.	cells/secondSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5651.6.2.3.4.1.12.1.1.8
mpCbQosPoliceCfgCellPir The peak policing rate in cells/second. Its value is valid only when mpCbQosPoliceCfgRateType equals to 3.	cells/secondSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5651.6.2.3.4.1.12.1.1.9
mpCbQosPoliceCfgBurstCell The amount of traffic, in cells, in excess of the committed policing rate that will be permitted by the policing feature.	CellsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5651.6.2.3.4.1.12.1.1.10
mpCbQosPoliceCfgExtBurstCell The amount of traffic, in cells, in excess of the burst limit, which may be conditionally permitted by the policing feature. The probability that the traffic is not permitted increases as the received burst size incr…	CellsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5651.6.2.3.4.1.12.1.1.11
mpCbQosPoliceCfgBurstTime The amount of traffic time, in ms (milli-seconds), in excess of the committed policing rate that will be permitted by the policing feature. The milli-second value is internally converted to bytes by using the bandwid…	milli-secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5651.6.2.3.4.1.12.1.1.12
mpCbQosPoliceCfgExtBurstTime The amount of traffic time, in ms (milli-seconds), in excess of the burst limit, which may be conditionally permitted by the policing feature. The probability that the traffic is not permitted increases as the receiv…	milli-secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5651.6.2.3.4.1.12.1.1.13

This table specifies Police Action configuration information.

mpCbQosPoliceActionCfgEntry row .1.3.6.1.4.1.5651.6.2.3.4.1.13.1.1

Each entry in this table describes configuration information
about Actions for one Police. The table holds Police action
specific configuration parameters. This table is a sub-table
for mpCbQosPoliceCfgTable. There …

Indexes

mpCbQosConfigIndex mpCbQosPoliceActionCfgIndex

Column	Syntax	OID
mpCbQosPoliceActionCfgIndex An arbitrary (system-assigned) index for police actions that are defined by a police configuration.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5651.6.2.3.4.1.13.1.1.1
mpCbQosPoliceActionCfgConform Action to be taken when the traffic is within the configured rate, that is, the traffic rate is conforming.	Enumeration Enumerated Values: 1 transmit 2 setIpDSCP 3 setIpPrecedence 4 setQosGroup 5 drop 6 setMplsExp 7 setAtmClp 8 setFrDe 9 setL2Cos 10 setDiscardClass 11 setMplsExpTopMost 12 setIpDscpTunnel 13 setIpPrecedenceTunnel 14 setL2CosInner	.1.3.6.1.4.1.5651.6.2.3.4.1.13.1.1.2
mpCbQosPoliceActionCfgConformSetValue New packet attribute values for each packet set by police action defined in mpCbQosPoliceActionCfgConform. This object will be set to zero if the corresponding police action does not require a set value, such as no a…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5651.6.2.3.4.1.13.1.1.3
mpCbQosPoliceActionCfgExceed Action to be taken when the traffic exceeds the configured rate, that is, the traffic is non-conforming.	Enumeration Enumerated Values: 1 transmit 2 setIpDSCP 3 setIpPrecedence 4 setQosGroup 5 drop 6 setMplsExp 7 setAtmClp 8 setFrDe 9 setL2Cos 10 setDiscardClass 11 setMplsExpTopMost 12 setIpDscpTunnel 13 setIpPrecedenceTunnel 14 setL2CosInner	.1.3.6.1.4.1.5651.6.2.3.4.1.13.1.1.4
mpCbQosPoliceActionCfgExceedSetValue New packet attribute values for each packet set by police action defined in mpCbQosPoliceActionCfgExceed. This object will be set to zero if the corresponding police action does not require a set value, such as no ac…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5651.6.2.3.4.1.13.1.1.5
mpCbQosPoliceActionCfgViolate Action to be taken when the traffic exceeds the conform and exceed token buckets.	Enumeration Enumerated Values: 1 transmit 2 setIpDSCP 3 setIpPrecedence 4 setQosGroup 5 drop 6 setMplsExp 7 setAtmClp 8 setFrDe 9 setL2Cos 10 setDiscardClass 11 setMplsExpTopMost 12 setIpDscpTunnel 13 setIpPrecedenceTunnel 14 setL2CosInner	.1.3.6.1.4.1.5651.6.2.3.4.1.13.1.1.6
mpCbQosPoliceActionCfgViolateSetValue New packet attribute values for each packet set by police action defined in mpCbQosPoliceActionCfgViolate. This object will be set to zero if the corresponding police action does not require a set value, such as no a…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5651.6.2.3.4.1.13.1.1.7

This table specifies traffic-shaping Action configuration 
information.

mpCbQosTSCfgEntry row .1.3.6.1.4.1.5651.6.2.3.4.1.14.1.1

Each entry in this table describes configuration information
about a traffic-shaping Action. The table holds Traffic Shaping
configuration parameters, such as rate, burst size, and Shaping
types.

Indexes

mpCbQosConfigIndex

Column	Syntax	OID
mpCbQosTSCfgRate64 The committed traffic-shaping rate in bits/second. This is the sustained rate permitted by the traffic-shaping.	bits/secondUnsigned64	.1.3.6.1.4.1.5651.6.2.3.4.1.14.1.1.1
mpCbQosTSCfgBurstSize The amount of traffic, in bits, in excess of the committed traffic-shaping rate that will be instantaneously permitted by this feature.	bitsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5651.6.2.3.4.1.14.1.1.2
mpCbQosTSCfgExtBurstSize The amount of traffic, in bits, in excess of the burst limit, which may be conditionally permitted by traffic-shaping feature.	bitsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5651.6.2.3.4.1.14.1.1.3
mpCbQosTSCfgAdaptiveEnabled This object indicates is adaptive traffic-shaping has been enabled.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.5651.6.2.3.4.1.14.1.1.4
mpCbQosTSCfgAdaptiveRate64 This object represents the current adaptive traffic shaping rate.	bits/secondUnsigned64	.1.3.6.1.4.1.5651.6.2.3.4.1.14.1.1.5
mpCbQosTSCfgLimitType This object indicates if traffic-shaping is limiting traffic based on the peak rate or the average rate.	Enumeration Enumerated Values: 1 average 2 peak	.1.3.6.1.4.1.5651.6.2.3.4.1.14.1.1.6
mpCbQosTSCfgRateType The rate type that configured for traffic-shaping. 1 means rate is configured in bps (Bits Per Second). 2 means rate is configured in percentage. 3 means rates are configured in cps (Cells Per Second).	Enumeration Enumerated Values: 1 bps 2 percentage 3 cps	.1.3.6.1.4.1.5651.6.2.3.4.1.14.1.1.7
mpCbQosTSCfgPercentRateValue The committed traffic-shaping rate in percentage. Its value is valid only when mpCbQosTSCfgRateType equals to 2.	% of Interface BandwidthUnsigned32 Constraints: range: 0-100	.1.3.6.1.4.1.5651.6.2.3.4.1.14.1.1.8
mpCbQosTSCfgBurstTime The amount of traffic, in ms, in excess of the committed traffic-shaping rate that will be instantaneously permitted by this feature. The milli-second value is internally converted to bits by using the bandwidth that…	milli-secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5651.6.2.3.4.1.14.1.1.9
mpCbQosTSCfgExtBurstTime The amount of traffic, in ms, in excess of the burst limit, which may be conditionnally permitted by traffic-shaping feature. The milli-second value is internally converted to bits by using the bandwidth that is avai…	milli-secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5651.6.2.3.4.1.14.1.1.10

This table specifies Packet Marking Action configuration 
information.

mpCbQosSetCfgEntry row .1.3.6.1.4.1.5651.6.2.3.4.1.15.1.1

Each entry in this table describes configuration information
about a Packet Marking Action. The table holds Packet Marking
configuration parameters, such as type of packet marking and
values being set to.

Indexes

mpCbQosConfigIndex

Column	Syntax	OID
mpCbQosSetCfgFeature The bit-wise position of each packet marking feature.	Bits Enumerated Values: 0 ipDscp 1 ipPrecedence 2 qosGroupNumber 3 frDeBit 4 atmClpBit 5 l2Cos 6 mplsExp 7 discardClass 8 mplsExpTopMost 9 frFecnBecn 10 ipDscpTunnel 11 ipPrecedenceTunnel 12 l2CosInner 13 ipTos	.1.3.6.1.4.1.5651.6.2.3.4.1.15.1.1.1
mpCbQosSetCfgIpDSCPValue The IP DSCP value at which the packet is being set by the packet marking feature.	Integer32 Constraints: range: 0-63	.1.3.6.1.4.1.5651.6.2.3.4.1.15.1.1.2
mpCbQosSetCfgIpPrecedenceValue The IP precedence value at which the packet is being set by the packet marking feature.	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.5651.6.2.3.4.1.15.1.1.3
mpCbQosSetCfgQosGroupValue The QoS Group number at which the packet is being set by the packet marking feature.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5651.6.2.3.4.1.15.1.1.4
mpCbQosSetCfgL2CosValue The Layer 2 Cos value at which the packet is being set by the packet marking feature.	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.5651.6.2.3.4.1.15.1.1.5
mpCbQosSetCfgMplsExpValue The MPLS experimental value at which the packet is being set by the packet marking feature.	Unsigned32 Constraints: range: 0-7	.1.3.6.1.4.1.5651.6.2.3.4.1.15.1.1.6
mpCbQosSetCfgDiscardClassValue The Discard Class value at which the packet is being set by the packet marking feature.	Unsigned32 Constraints: range: 0-7	.1.3.6.1.4.1.5651.6.2.3.4.1.15.1.1.7
mpCbQosSetCfgMplsExpTopMostValue The MPLS experimental value on the topmost label at which the packet is being set by the packet marking feature.	Unsigned32 Constraints: range: 0-7	.1.3.6.1.4.1.5651.6.2.3.4.1.15.1.1.8
mpCbQosSetCfgFrFecnBecn This is a configurable parameter in percentage of the queue size. When the current queue size out of the queue limit is greater than this parameter, both Frame Relay FECN and BECN bits will be set for Frame Relay con…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5651.6.2.3.4.1.15.1.1.9
mpCbQosSetCfgIpDSCPTunnelValue The IP DSCP Tunnel field value at which the packet is being set by the packet marking feature.	Integer32 Constraints: range: 0-63	.1.3.6.1.4.1.5651.6.2.3.4.1.15.1.1.10
mpCbQosSetCfgIpPrecedenceTunnelValue The IP precedence Tunnel field value at which the packet is being set by the packet marking feature.	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.5651.6.2.3.4.1.15.1.1.11
mpCbQosSetCfgL2CosInnerValue The value to be set in the 802.1p priority field in the inner 802.1q VLAN tag (QinQ). This object is applicable when mpCbQosSetCfgFeature has the 'l2CosInner' bit set.	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.5651.6.2.3.4.1.15.1.1.12
mpCbQosSetCfgIpTosValue The IP TOS value at which the packet is being set by the packet marking feature.	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.5651.6.2.3.4.1.15.1.1.13

This table specifies ClassMap related Statistical information.

mpCbQosCMStatsEntry row .1.3.6.1.4.1.5651.6.2.3.4.1.16.1.1

Each entry in this table describes the statistical information
about ClassMap. ClassMap specific information you can find in
this table are: pre/post policy pkt/byte counts, bit rates, drop
pkt/bytes and no buffer dr…

Indexes

mpCbQosPolicyIndex mpCbQosObjectsIndex

Column	Syntax	OID
mpCbQosCMPrePolicyPkt64 The 64 bits count of inbound packets prior to executing any QoS policies.	PacketsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.5651.6.2.3.4.1.16.1.1.1
mpCbQosCMPrePolicyByte64 The 64 bits count of inbound octets prior to executing any QoS policies.	OctetsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.5651.6.2.3.4.1.16.1.1.2
mpCbQosCMPrePolicyBitRate64 The bit rate of the traffic prior to executing any QoS policies.	bits per secondUnsigned64	.1.3.6.1.4.1.5651.6.2.3.4.1.16.1.1.3
mpCbQosCMPostPolicyPkt64 The lower 64 bits count of outbound packets after executing QoS policies.	PacketsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.5651.6.2.3.4.1.16.1.1.4
mpCbQosCMPostPolicyByte64 The 64 bits count of outbound octets after executing QoS policies.	OctetsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.5651.6.2.3.4.1.16.1.1.5
mpCbQosCMPostPolicyBitRate64 The bit rate of the traffic after executing QoS policies.	bits per secondUnsigned64	.1.3.6.1.4.1.5651.6.2.3.4.1.16.1.1.6
mpCbQosCMDropPkt64 The 64 bits counter of dropped pkts per class as the result of all features that can produce drops (e.g., police, random detect, etc.).	PacketsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.5651.6.2.3.4.1.16.1.1.7
mpCbQosCMDropByte64 The 64 bits counter of dropped bytes per class as the result of all features that can produce drops (e.g., police, random detect, etc.).	OctetsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.5651.6.2.3.4.1.16.1.1.8
mpCbQosCMDropBitRate64 The bit rate of the drops per class as the result of all features that can produce drops (e.g., police, random detect, etc.).	bits per secondUnsigned64	.1.3.6.1.4.1.5651.6.2.3.4.1.16.1.1.9
mpCbQosCMNoBufDropPkt64 The 64 bits drop packet count which occured due to lack of buffers during output processing on an interface.	PacketsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.5651.6.2.3.4.1.16.1.1.10

This table specifies Match Statement related statistical 
information.

mpCbQosMatchStmtStatsEntry row .1.3.6.1.4.1.5651.6.2.3.4.1.17.1.1

Each entry in this table describes the statistical information
about Match Statement. Match Statement specific information you
can find in this table are: Pre policy pkt/byte counters, and
bit rates.

Indexes

mpCbQosPolicyIndex mpCbQosObjectsIndex

Column	Syntax	OID
mpCbQosMatchPrePolicyPkt64 The 64 bits count of inbound packets prior to executing any QoS policies.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.5651.6.2.3.4.1.17.1.1.1
mpCbQosMatchPrePolicyByte64 The 64 bits count of inbound octets prior to executing any QoS policies.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.5651.6.2.3.4.1.17.1.1.2
mpCbQosMatchPrePolicyBitRate64 The bit rate of the traffic prior to executing any QoS policies.	bits per secondUnsigned64	.1.3.6.1.4.1.5651.6.2.3.4.1.17.1.1.3

This table specifies Police Action related Statistical 
information.

mpCbQosPoliceStatsEntry row .1.3.6.1.4.1.5651.6.2.3.4.1.18.1.1

Each entry in this table describes the statistical information
about Police Action. Police Action specific information you can
find in this table are: Conformed/Exceeded pkt/byte counters, bit
rates.

Indexes

mpCbQosPolicyIndex mpCbQosObjectsIndex

Column	Syntax	OID
mpCbQosPoliceConformedPkt64 The 64 bits count of packets treated as conforming by the policing feature.	PacketsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.5651.6.2.3.4.1.18.1.1.1
mpCbQosPoliceConformedByte64 The 64 bits count of octets treated as conforming by the policing feature.	OctetsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.5651.6.2.3.4.1.18.1.1.2
mpCbQosPoliceConformedBitRate64 The bit rate of conforming traffic.	bits per secondUnsigned64	.1.3.6.1.4.1.5651.6.2.3.4.1.18.1.1.3
mpCbQosPoliceExceededPkt64 The 64 bits count of packets treated as non-conforming by the policing feature.	PacketsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.5651.6.2.3.4.1.18.1.1.4
mpCbQosPoliceExceededByte64 The 64 bits count of octets treated as non-conforming by the policing feature.	OctetsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.5651.6.2.3.4.1.18.1.1.5
mpCbQosPoliceExceededBitRate64 The bit rate of the non-conforming traffic.	bits per secondUnsigned64	.1.3.6.1.4.1.5651.6.2.3.4.1.18.1.1.6
mpCbQosPoliceViolatedPkt64 The 64 bits count of packets treated as violated by the policing feature.	PacketsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.5651.6.2.3.4.1.18.1.1.7
mpCbQosPoliceViolatedByte64 The 64 bits count of octets treated as violated by the policing feature.	OctetsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.5651.6.2.3.4.1.18.1.1.8
mpCbQosPoliceViolatedBitRate64 The bit rate of the violating traffic.	bits per secondUnsigned64	.1.3.6.1.4.1.5651.6.2.3.4.1.18.1.1.9

This table specifies Queueing Action related Statistical 
information.

mpCbQosQueueingStatsEntry row .1.3.6.1.4.1.5651.6.2.3.4.1.19.1.1

Each entry in this table describes the statistical information
about queueing action. Queueing action specific information you
can find in this table are: various Q depth, and discard pkt/byte
counters.

Indexes

mpCbQosPolicyIndex mpCbQosObjectsIndex

Column	Syntax	OID
mpCbQosQueueingQDepthUnit Represents the unit type to measure the depth of the queue.	Enumeration Enumerated Values: 1 packets 2 bytes 3 cells 4 ms 5 us	.1.3.6.1.4.1.5651.6.2.3.4.1.19.1.1.1
mpCbQosQueueingCurrentQDepth The current depth of the queue.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5651.6.2.3.4.1.19.1.1.2
mpCbQosQueueingMaxQDepth The maximum depth of the queue.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5651.6.2.3.4.1.19.1.1.3
mpCbQosQueueingDiscardByte64 The count of octets, associated with this class, that were dropped by queueing.	OctetsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.5651.6.2.3.4.1.19.1.1.4
mpCbQosQueueingDiscardPkt64 The number of packets, associated with this class, that were dropped by queueing.	PacketsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.5651.6.2.3.4.1.19.1.1.5

This table specifies traffic-shaping Action related Statistical 
information.

mpCbQosTSStatsEntry row .1.3.6.1.4.1.5651.6.2.3.4.1.20.1.1

Each entry in this table describes the statistical information
about traffic-shaping Action. Traffic-shaping Action specific
information you can find in this table are: various delay/drop
pkt/byte counters, state of …

Indexes

mpCbQosPolicyIndex mpCbQosObjectsIndex

Column	Syntax	OID
mpCbQosTSStatsDelayedByte64 This object represents the 64 bits counter of octets that have been delayed.	OctetsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.5651.6.2.3.4.1.20.1.1.1
mpCbQosTSStatsDelayedPkt64 This object represents the 64 bits counter of packets that have been delayed.	PacketsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.5651.6.2.3.4.1.20.1.1.2
mpCbQosTSStatsDropByte64 This object represents the 64 bits counter of octets that have been dropped during shaping.	OctetsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.5651.6.2.3.4.1.20.1.1.3
mpCbQosTSStatsDropPkt64 This object represents the 64 bits counter of packets that have been dropped during shaping.	PacketsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.5651.6.2.3.4.1.20.1.1.4
mpCbQosTSStatsActive This object indicates the current traffic-shaping state. When traffic-shaping is enabled and the traffic rate exceeds the shape rate, traffic-shaping is considered to be active. Otherwise, it is considered inactive.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.5651.6.2.3.4.1.20.1.1.5
mpCbQosTSStatsCurrentQSize This object indicates the current traffic-shaping queue depth in packets.	PacketsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5651.6.2.3.4.1.20.1.1.6

This table specifies per Precedence WRED Action related 
Statistical information.

mpCbQosREDClassStatsEntry row .1.3.6.1.4.1.5651.6.2.3.4.1.21.1.1

Each entry in this table describes the statistical information
about per Precedence WRED Action. per Precedence WRED Action
specific information you can find in this table are: Random
pkt/byte counters, and Tail drop…

Indexes

mpCbQosPolicyIndex mpCbQosObjectsIndex mpCbQosREDValue

Column	Syntax	OID
mpCbQosREDRandomDropPkt64 The 64 bits count of packets dropped when the number of packets in the associated queue was greater than the minimum threshold and less than the maximum threshold.	PacketsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.5651.6.2.3.4.1.21.1.1.1
mpCbQosREDRandomDropByte64 The 64 bits count of bytes dropped when the number of packets in the associated queue was greater than the minimum threshold and less than the maximum threshold.	OctetsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.5651.6.2.3.4.1.21.1.1.2
mpCbQosREDTailDropPkt64 The 64 bits count of packets dropped when the number of packets in the associated queue was greater than the maximum threshold.	PacketsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.5651.6.2.3.4.1.21.1.1.3
mpCbQosREDTailDropByte64 The 64 bits count of bytes dropped when the number of packets in the associated queue was greater than the maximum threshold.	OctetsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.5651.6.2.3.4.1.21.1.1.4
mpCbQosREDTransmitPkt64 The 64 bits count of packets transmitted.	PacketsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.5651.6.2.3.4.1.21.1.1.5
mpCbQosREDTransmitByte64 The 64 bits count of octets transmitted.	OctetsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.5651.6.2.3.4.1.21.1.1.6
mpCbQosREDECNMarkPkt64 The 64 bits count of packets ecn marked when the number of packets in the associated queue was greater than the minimum threshold and less than the maximum threshold.	PacketsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.5651.6.2.3.4.1.21.1.1.7
mpCbQosREDECNMarkByte64 The 64 bits count of bytes ecn marked when the number of packets in the associated queue was greater than the minimum threshold and less than the maximum threshold.	OctetsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.5651.6.2.3.4.1.21.1.1.8
mpCbQosREDMeanQSizeUnits Represents the unit type of mpCbQosREDMeanQSize object.	Enumeration Enumerated Values: 1 packets 2 bytes 3 cells 4 ms 5 us	.1.3.6.1.4.1.5651.6.2.3.4.1.21.1.1.9
mpCbQosREDMeanQSize The average queue size computed and used by the WRED algorithm.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5651.6.2.3.4.1.21.1.1.10

This table specifies packet marking statistical information.

mpCbQosSetStatsEntry row .1.3.6.1.4.1.5651.6.2.3.4.1.22.1.1

Each entry in this table describes the packets that marked by
each marking type.

Indexes

mpCbQosPolicyIndex mpCbQosObjectsIndex

Column	Syntax	OID
mpCbQosSetDscpPkt64 The 64 bits count of packets whose DSCP field is marked by Set feature.	PacketsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.5651.6.2.3.4.1.22.1.1.1
mpCbQosSetPrecedencePkt64 The 64 bits count of packets whose Precedence field is marked by Set feature.	PacketsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.5651.6.2.3.4.1.22.1.1.2
mpCbQosSetQosGroupPkt64 The 64 bits count of packets whose Qos Group field is marked by Set feature.	PacketsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.5651.6.2.3.4.1.22.1.1.3
mpCbQosSetFrDePkt64 The 64 bits count of packets whose Frame Relay DE Bit is marked by Set feature.	PacketsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.5651.6.2.3.4.1.22.1.1.4
mpCbQosSetAtmClpPkt64 The 64 bits count of packets whose ATM CLP Bit is marked by Set feature.	PacketsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.5651.6.2.3.4.1.22.1.1.5
mpCbQosSetL2CosPkt64 The 64 bits count of packets whose Layer 2 Cos field is marked by Set feature.	PacketsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.5651.6.2.3.4.1.22.1.1.6
mpCbQosSetMplsExpImpositionPkt64 The 64 bits count of packets whose MPLS Experimental Imposition field is marked by Set feature.	PacketsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.5651.6.2.3.4.1.22.1.1.7
mpCbQosSetDiscardClassPkt64 The 64 bits count of packets whose Discard Class field is marked by Set feature.	PacketsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.5651.6.2.3.4.1.22.1.1.8
mpCbQosSetMplsExpTopMostPkt64 The 64 bits count of packets whose MPLS Experimental TopMost field is marked by Set feature.	PacketsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.5651.6.2.3.4.1.22.1.1.9
mpCbQosSetFrFecnBecnPkt64 The 64 bits count of packets whose Frame Relay FECN BECN field is marked by Set feature.	PacketsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.5651.6.2.3.4.1.22.1.1.10
mpCbQosSetDscpTunnelPkt64 The 64 bits count of packets whose DSCP Tunnel field is marked by Set feature.	PacketsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.5651.6.2.3.4.1.22.1.1.11
mpCbQosSetPrecedenceTunnelPkt64 The 64 bits count of packets whose Precedence Tunnel field is marked by Set feature.	PacketsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.5651.6.2.3.4.1.22.1.1.12
mpCbQosSetTosPkt64 The 64 bits count of packets whose TOS field is marked by Set feature.	PacketsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.5651.6.2.3.4.1.22.1.1.13