LUM-WDM-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

345

wdmIfTable

table

.1.3.6.1.4.1.8708.2.4.2.2.1 · 1 row entry · 124 columns

Open in standard view

Uses the infinera variant from /opt/observium/mibs/infinera.

Command help

Walk wdmIfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-WDM-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-WDM-MIB::wdmIfTable'

The interface list.

wdmIfEntry row .1.3.6.1.4.1.8708.2.4.2.2.1.1

An entry in the interface list.

Indexes

wdmIfIndex

Column Syntax OID

wdmIfIndex

An arbitrary index assigned to each if entry.

Unsigned32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.8708.2.4.2.2.1.1.1

wdmIfName

The management name of the interface, for example
'wdm:1:2:1'.

LUM-TCMgmtNameString

Type Constraints:
range: 0..255

Description:

An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.

.1.3.6.1.4.1.8708.2.4.2.2.1.1.2

wdmIfDescr

User configurable label.

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.8708.2.4.2.2.1.1.3

wdmIfSubrack

The number of the subrack where the interface
is located.

LUM-TCSubrackNumber

Type Constraints:
range: 0..15

Description:

The number of a subrack within a network element.

0 signifies an undefined subrack number.

.1.3.6.1.4.1.8708.2.4.2.2.1.1.4

wdmIfSlot

The number of the slot where the interface is
located.

LUM-TCSlotNumber

Type Constraints:
range: 0..22

Description:

The number of a slot within a subrack.

0 signifies an undefined slot number.

.1.3.6.1.4.1.8708.2.4.2.2.1.1.5

wdmIfTxPort

The number of the port where the interface is
located.

LUM-TCPortNumber

Type Constraints:
range: 0..116

Description:

The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.

.1.3.6.1.4.1.8708.2.4.2.2.1.1.6

wdmIfInvPhysIndexOrZero

The row in the invPhysTable for this interface.
Set to 0 if not known.

Unsigned32

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.8708.2.4.2.2.1.1.7

wdmIfTxLambda

The transmitted frequency given in hundreds of
GHz (0.01 GHz).

LUM-TCLambdaFrequency

Type Values:

0	undefined
1	iWdmPonFrequency
2	otclg
130	b1300
150	b1500
850	w850
1270	w1270
1290	w1290
1310	w1310
1330	w1330
1350	w1350
1370	w1370
1390	w1390
1410	w1410
1430	w1430
1450	w1450
1470	w1470
1490	w1490
1510	w1510
1530	w1530
1550	w1550
1570	w1570
1590	w1590
1610	w1610
1611	w1611
18710	ch871
18730	ch873
18750	ch875
18770	ch877
18790	ch879
18810	ch881
18830	ch883
18850	ch885
18870	ch887
18890	ch889
18910	ch891
18930	ch893
18950	ch895
18970	ch897
18990	ch899
19010	ch901
19030	ch903
19050	ch905
19070	ch907
19090	ch909
19135	ch9135
19140	ch914
19145	ch9145
19150	ch915
19155	ch9155
19160	ch916
19165	ch9165
19170	ch917
19175	ch9175
19180	ch918
19185	ch9185
19190	ch919
19195	ch9195
19200	ch920
19205	ch9205
19210	ch921
19215	ch9215
19220	ch922
19225	ch9225
19230	ch923
19235	ch9235
19240	ch924
19245	ch9245
19250	ch925
19255	ch9255
19260	ch926
19265	ch9265
19270	ch927
19275	ch9275
19280	ch928
19285	ch9285
19290	ch929
19295	ch9295
19300	ch930
19305	ch9305
19310	ch931
19315	ch9315
19320	ch932
19325	ch9325
19330	ch933
19335	ch9335
19340	ch934
19345	ch9345
19350	ch935
19355	ch9355
19360	ch936
19365	ch9365
19370	ch937
19375	ch9375
19380	ch938
19385	ch9385
19390	ch939
19395	ch9395
19400	ch940
19405	ch9405
19410	ch941
19415	ch9415
19420	ch942
19425	ch9425
19430	ch943
19435	ch9435
19440	ch944
19445	ch9445
19450	ch945
19455	ch9455
19460	ch946
19465	ch9465
19470	ch947
19475	ch9475
19480	ch948
19485	ch9485
19490	ch949
19495	ch9495
19500	ch950
19505	ch9505
19510	ch951
19515	ch9515
19520	ch952
19525	ch9525
19530	ch953
19535	ch9535
19540	ch954
19545	ch9545
19550	ch955
19555	ch9555
19560	ch956
19565	ch9565
19570	ch957
19575	ch9575
19580	ch958
19585	ch9585
19590	ch959
19595	ch9595
19600	ch960
19605	ch9605
19610	ch961

Description:

The frequency of the 'wavelength' given in hundreds
of GHz (0.01 GHz).

.1.3.6.1.4.1.8708.2.4.2.2.1.1.8

wdmIfHighSpeedMin

The minimum speed in units of 1,000,000 bits per
second. If this object reports a value of 'n' then
the speed of the interface is somewhere in the
range of 'n-500,000' to 'n+499,999'.

SNMPv2-SMIGauge32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.8708.2.4.2.2.1.1.9

wdmIfHighSpeedMax

The maximum speed in units of 1,000,000 bits per
second. If this object reports a value of 'n' then
the speed of the interface is somewhere in the
range of 'n-500,000' to 'n+499,999'.

SNMPv2-SMIGauge32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.8708.2.4.2.2.1.1.10

wdmIfPowerLevel

The received power level in units of 0.1 dBm.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.8708.2.4.2.2.1.1.11

wdmIfPowerLevelHighThreshold

The upper threshold for received power level in
units of 0.1 dBm.

Note: Depending on the type of board and interface
the value range may vary.

Integer32r/w

Constraints:
range: -380--60

.1.3.6.1.4.1.8708.2.4.2.2.1.1.12

wdmIfPowerLevelLowThreshold

The lower threshold for received power level in
units of 0.1 dBm.

Note: Depending on the type of board and interface
the value range may vary.

Integer32r/w

Constraints:
range: -380--60

.1.3.6.1.4.1.8708.2.4.2.2.1.1.13

wdmIfLaserTemp

The pre-set laser temperature in units of
0.1 degrees centigrade.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.8708.2.4.2.2.1.1.14

wdmIfLaserTempOffset

The current offset from the pre-set temperature
in units of 0.1 degrees centigrade.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.8708.2.4.2.2.1.1.15

wdmIfLaserTempOffsetThreshold

The absolute value of the offset for the LTL
and LTH alarms in units of 0.1 degrees centigrade.

Unsigned32r/w

Constraints:
range: 1-100

.1.3.6.1.4.1.8708.2.4.2.2.1.1.16

wdmIfLaserMode

The administrative state of the TX-side laser.

on - The laser is turned on.

als - Automatic Laser Shutdown/Turn-Off
when lossOfSignal is detected on the RX side.

Enumerationr/w

Enumerated Values:

1	on
2	als

.1.3.6.1.4.1.8708.2.4.2.2.1.1.17

wdmIfLaserStatus

The operational state of the TX-side laser.

off - The laser is turned off.

on - The laser is turned on.

Enumeration

Enumerated Values:

1	off
2	on

.1.3.6.1.4.1.8708.2.4.2.2.1.1.18

wdmIfAdminStatus

The administrative state for the interface.

down - The interface is de-activated.

service - The interface is activated but alarms
are suppressed. Intended for use during service
or re-confi…

LUM-TCBoardOrInterfaceAdminStatusr/w

Type Values:

1	down
2	service
3	up

Description:

The administrative state for a board or
interface.

down - The board/interface should be inactive.

service - The board/interface is activated but
alarms are suppressed. Intended for use during
servi…

.1.3.6.1.4.1.8708.2.4.2.2.1.1.19

wdmIfOperStatus

The operational state for the interface.

notPresent - The interface is not available.

down - The interface is de-activated or there are
faults preventing its transition to the 'up' state.
…

LUM-TCBoardOrInterfaceOperStatus

Type Values:

1	notPresent
2	down
3	up

Description:

The operational state for a board or interface.

notPresent - The board/interface is not available.

down - The board/interface is de-activated or
there are faults preventing it from going to the
'up…

.1.3.6.1.4.1.8708.2.4.2.2.1.1.20

wdmIfLossOfSignal

Loss of signal.
Applicable for all signal formats.

A(ctivation): Active loss of signal HW indication.

D(e-activation): Inactive loss of signal HW
indication.

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…

.1.3.6.1.4.1.8708.2.4.2.2.1.1.21

wdmIfReceivedPowerHigh

Received power level is too high.
Applicable for all signal formats.

A: The received power level exceeds the
the built-in overload threshold.

D: The received power level is 0.5 dB below the…

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.4.2.2.1.1.22

wdmIfReceivedPowerLow

Received power level low threshold exceeded.
Applicable for all signal formats.

A: The received power level is below the
associated threshold.

D: The received power level is 0.5 dB above th…

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.4.2.2.1.1.23

wdmIfLaserBiasHigh

Laser bias high threshold exceeded.

A: The laser bias current exceeds the associated
threshold.

D: The laser bias current is 0.5 mA below the
associated threshold.

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.4.2.2.1.1.24

wdmIfErroredSecondsdeprecated

Note: This attribute is deprecated!

Errored seconds (ES) threshold exceeded.

A: The number of errored seconds during a period
exceeds the associated threshold.

D: At the star…

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.4.2.2.1.1.25

wdmIfSeverelyErroredSecondsdeprecated

Note: This attribute is deprecated!

Severely errored seconds (SES) threshold exceeded.

A: The number of severely errored seconds during
a period exceeds the associated threshold.
…

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.4.2.2.1.1.26

wdmIfBackgroundBlockErrorsdeprecated

Note: This attribute is deprecated!

Background block errors (BBE) threshold exceeded.

A: The number of errors during a period
exceeds the associated threshold.

D: At the star…

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.4.2.2.1.1.27

wdmIfUnavailableSecondsdeprecated

Note: This attribute is deprecated!

Unavailable seconds (UAS) threshold exceeded.

A: The number of unavailable seconds during a
period exceeds the associated threshold.

D: At…

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.4.2.2.1.1.28

wdmIfForwardDefectIndication

Forward defect indication.
Applicable for all signal formats; detected at
WDM level. This alarm suppresses the
corresponding SDH/Sonet alarm.

A: Forward defect indication (in wrapper) active.
…

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.4.2.2.1.1.29

wdmIfBackwardDefectIndication

Backward defect indication.
Applicable for all signal formats; detected at
WDM level. This alarm suppresses the
corresponding SDH/Sonet alarm.

A: Backward defect indication (in wrapper) active.
…

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.4.2.2.1.1.30

wdmIfLossOfFrame

Loss of frame.
Applicable for SDH/Sonet signal formats.

A: SDH frame can not be located.

D: SDH frame is located.

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.4.2.2.1.1.31

wdmIfAlarmIndicationSignal

Alarm indication signal.
Applicable for SDH/Sonet signal formats.
For other proprietary formats, e.g. for
the tpDDGbE line signal, a similar
functionality is emulated.

A: An 'all ones' SDH/Sonet signal is…

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.4.2.2.1.1.32

wdmIfRemoteDefectIndication

Remote defect indication.
Applicable for SDH/Sonet signal formats.

A: RDI indication (in SDH/Sonet frame) active.

D: RDI indication inactive.

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.4.2.2.1.1.33

wdmIfLossOfSync

Loss of sync (GbE).
Applicable for GbE signal formats.

A: GbE 'frame' can not be located.

D: GbE 'frame' is located.

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.4.2.2.1.1.34

wdmIfLossOfForwardingErrorCorrection

Loss of forwarding error correction (FEC).
Applicable for all signal formats.

A: The interface is unable to perform forwarding
error correction.

D: The interface is able to perform FEC.

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.4.2.2.1.1.35

wdmIfLaserTempHigh

Laser temperature high threshold exceeded.

A: The temperature exceeds the associated
threshold.

D: Temperature is 0.5 degrees centigrade below
the associated threshold.

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.4.2.2.1.1.36

wdmIfLaserTempLow

Laser temperatur low threshold exceeded.
The temperature exceeds the associated threshold.

A: The temperature exceeds the associated
threshold.

D: Temperature is 0.5 degrees centigrade abov…

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.4.2.2.1.1.37

wdmIfRxPort

The number of the port where the interface is
located.

LUM-TCPortNumber

Type Constraints:
range: 0..116

Description:

The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.

.1.3.6.1.4.1.8708.2.4.2.2.1.1.38

wdmIfBitrateMismatch

Bitrate mismatch (Other).
Applicable for other signal formats.

A: The interface is unable to lock to the
inserted signal.

D: The interface is able to lock to the inserted
signal.

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.4.2.2.1.1.39

wdmIfLaserBias

Measures laser bias current value in tenths of
mA (0.1 mA).

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.8708.2.4.2.2.1.1.40

wdmIfLaserBiasThreshold

Sets the threshold for the laser bias alarm.
in percentage relative to the value set during
production. The preset value is 100%.

Unsigned32r/w

Constraints:
range: 0-300

.1.3.6.1.4.1.8708.2.4.2.2.1.1.41

wdmIfLossOfSignalThreshold

The upper threshold received power level in
units of 0.1 dBm.

Note: Depending on the type of board and interface
the value range may vary.

Integer32r/w

Constraints:
range: -380--220

.1.3.6.1.4.1.8708.2.4.2.2.1.1.42

wdmIfJ0PathTracedeprecated

The received J0 path trace string.
Applicable for SDH/Sonet signal formats.

OctetString

Constraints:
range: 1-1
range: 16-16

.1.3.6.1.4.1.8708.2.4.2.2.1.1.44

wdmIfInbandModedeprecated

The administrative state the in-band management
channel of the WDM interface.

down - The management channel is disabled.

up - The management channel is in use.

Enumerationr/w

Enumerated Values:

1	down
2	up

.1.3.6.1.4.1.8708.2.4.2.2.1.1.45

wdmIfInbandStatusdeprecated

The operational state the in-band management
channel of the WDM interface.

down - The management channel is disabled.

up - The management channel is in use.

Enumeration

Enumerated Values:

1	down
2	up

.1.3.6.1.4.1.8708.2.4.2.2.1.1.46

wdmIfExpectedTxLambda

The expected frequency or wavelength.
ch871 means the frequency 187.1 THz.
w1310 means the wavelength 1310 nm.

The semantic of this attribute is different depending
on the laser frequency type.
…

LUM-TCLambdaFrequencyr/w

Type Values:

0	undefined
1	iWdmPonFrequency
2	otclg
130	b1300
150	b1500
850	w850
1270	w1270
1290	w1290
1310	w1310
1330	w1330
1350	w1350
1370	w1370
1390	w1390
1410	w1410
1430	w1430
1450	w1450
1470	w1470
1490	w1490
1510	w1510
1530	w1530
1550	w1550
1570	w1570
1590	w1590
1610	w1610
1611	w1611
18710	ch871
18730	ch873
18750	ch875
18770	ch877
18790	ch879
18810	ch881
18830	ch883
18850	ch885
18870	ch887
18890	ch889
18910	ch891
18930	ch893
18950	ch895
18970	ch897
18990	ch899
19010	ch901
19030	ch903
19050	ch905
19070	ch907
19090	ch909
19135	ch9135
19140	ch914
19145	ch9145
19150	ch915
19155	ch9155
19160	ch916
19165	ch9165
19170	ch917
19175	ch9175
19180	ch918
19185	ch9185
19190	ch919
19195	ch9195
19200	ch920
19205	ch9205
19210	ch921
19215	ch9215
19220	ch922
19225	ch9225
19230	ch923
19235	ch9235
19240	ch924
19245	ch9245
19250	ch925
19255	ch9255
19260	ch926
19265	ch9265
19270	ch927
19275	ch9275
19280	ch928
19285	ch9285
19290	ch929
19295	ch9295
19300	ch930
19305	ch9305
19310	ch931
19315	ch9315
19320	ch932
19325	ch9325
19330	ch933
19335	ch9335
19340	ch934
19345	ch9345
19350	ch935
19355	ch9355
19360	ch936
19365	ch9365
19370	ch937
19375	ch9375
19380	ch938
19385	ch9385
19390	ch939
19395	ch9395
19400	ch940
19405	ch9405
19410	ch941
19415	ch9415
19420	ch942
19425	ch9425
19430	ch943
19435	ch9435
19440	ch944
19445	ch9445
19450	ch945
19455	ch9455
19460	ch946
19465	ch9465
19470	ch947
19475	ch9475
19480	ch948
19485	ch9485
19490	ch949
19495	ch9495
19500	ch950
19505	ch9505
19510	ch951
19515	ch9515
19520	ch952
19525	ch9525
19530	ch953
19535	ch9535
19540	ch954
19545	ch9545
19550	ch955
19555	ch9555
19560	ch956
19565	ch9565
19570	ch957
19575	ch9575
19580	ch958
19585	ch9585
19590	ch959
19595	ch9595
19600	ch960
19605	ch9605
19610	ch961

Description:

The frequency of the 'wavelength' given in hundreds
of GHz (0.01 GHz).

.1.3.6.1.4.1.8708.2.4.2.2.1.1.47

wdmIfForwardingErrorCorrectionMode

The administrative state of the forwarding error
correction function.

disabled - FEC is disabled.

enabled - FEC is activated.

auto - autonegotiation is used to enable or disa…

Enumerationr/w

Enumerated Values:

1	disabled
2	enabled
3	auto

.1.3.6.1.4.1.8708.2.4.2.2.1.1.48

wdmIfUnexpectedTxLambda

The actual frequency does not match the
pre-configured frequency.

A pre-configured frequency of '0' matches
all actual frequencies.

A: The configured frequency does not match the
actual fre…

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.4.2.2.1.1.49

wdmIfTraceIntrusionMode

Indicates whether the trace identifier should be
inserted in the transmitted signal.

disabled - The trace identifier is taken from
the received signal if possible.

enabled - The trace iden…

Enumerationr/w

Enumerated Values:

1	disabled
2	enabled

.1.3.6.1.4.1.8708.2.4.2.2.1.1.50

wdmIfTraceTransmitted

The trace identifier to be transmitted from this
interface.

The identifier length is by default 0 to 15. For
mxp8iiSonet boards the length is 0 to 62.

Set to empty string for default value:…

SNMPv2-TCDisplayStringr/w

Constraints:
range: 0-62

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.8708.2.4.2.2.1.1.51

wdmIfTraceReceived

The received trace identifier for this interface.

SNMPv2-TCDisplayString

Constraints:
range: 0-62

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.8708.2.4.2.2.1.1.52

wdmIfTraceExpected

Trace identifier used for matching against
the received trace identifier.

The identifier length is by default 0 to 15. For
mxp8iiSonet boards the length is 0 to 62.

SNMPv2-TCDisplayStringr/w

Constraints:
range: 0-62

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.8708.2.4.2.2.1.1.53

wdmIfTraceAlarmMode

Controls if the trace identifier mismatch alarm
should be raised.

disabled - The alarm is disabled.

enabled - The alarm is raised if expected trace
identifier differs from the received trac…

Enumerationr/w

Enumerated Values:

1	disabled
2	enabled

.1.3.6.1.4.1.8708.2.4.2.2.1.1.54

wdmIfTraceMismatch

Indicates if the expected trace identifier
differs from the received trace identifier.

A: The received trace identifier differs from
the expected trace identifier.

D: The identifiers match.

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.4.2.2.1.1.55

wdmIfLaserStatusLastChangeTime

The time when the laser status was last changed.

SNMPv2-TCDateAndTime

Type Constraints:
range: 8
range: 11

Description:

A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …

.1.3.6.1.4.1.8708.2.4.2.2.1.1.56

wdmIfSuppressRemoteAlarms

Suppress AIS, FDI and RDI in the alarm list. The
fault status on the port object can, however, be
seen.

disabled - alarms are not suppressed.

enabled - alarms are suppressed.

Enumerationr/w

Enumerated Values:

1	disabled
2	enabled

.1.3.6.1.4.1.8708.2.4.2.2.1.1.57

wdmIfSerialNumberMismatch

Wrong HW unit installed. The link has not been
optimized for this individual, wrong serial number.

Action: The installation optimization procedure must
be run again.

A: The installed board …

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.4.2.2.1.1.58

wdmIfOptimizeDecisionThreshold

Optimize the threshold for distinguishing between
1s and 0s.

This attribute is of 'action type' - it will always
have the value 'normal'

normal - just a placeholder, is never set by the
…

LUM-TCCommandString

Description:

tbd

.1.3.6.1.4.1.8708.2.4.2.2.1.1.59

wdmIfThresholdOptimizationState

State of the optimization procedure

normal - no operation has been started

started - the operation is started

searchingFirstLow - Search for the fi…

Enumeration

Enumerated Values:

1	normal
2	started
3	searchingFirstLow
4	searchingSecondLow
5	searchingThirdLow
6	searchingFirstHigh
7	searchingSecondHigh
8	searchingThirdHigh
9	finishedFailed
10	finishedOk
11	searchingFrameLow
12	searchingFrameHigh
13	foundFrame
14	waitOptimize

.1.3.6.1.4.1.8708.2.4.2.2.1.1.60

wdmIfUseHwDefaultDecisionThreshold

Use the HW default decision threshold.

This attribute is of 'action type' - it will always
have the value 'normal'

normal - just a placeholder, is never set by the
user.
…

Enumerationr/w

Enumerated Values:

1	normal
2	reset

.1.3.6.1.4.1.8708.2.4.2.2.1.1.61

wdmIfFecCorrectedZeros

The number of corrected zeros.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.8708.2.4.2.2.1.1.62

wdmIfFecCorrectedOnes

The number of corrected ones.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.8708.2.4.2.2.1.1.63

wdmIfOptimizedForSerialNumber

This field contains the serial number of
the transponder unit, for which the decision
threshold is optimized and stored.

SNMPv2-TCDisplayStringr/w

Constraints:
range: 0-40

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.8708.2.4.2.2.1.1.64

wdmIfRelativeDecisionThreshold

The 1/0 decision threshold computed at installation.

The threshold is automatically optimized if the
'Continous optimization' functionality is enabled.
Press the 'Optimize' button to manually trigger
the …

Integer32r/w

Constraints:
range: -1000000-1000000

.1.3.6.1.4.1.8708.2.4.2.2.1.1.65

wdmIfTrxCodeMismatch

The inserted transceiver does not have a legal
manufacturer code.

A: A transceiver with illegal code is inserted.

D: The transceiver with illegal code is removed.

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.4.2.2.1.1.66

wdmIfTrxBitrateUnavailable

The inserted transceiver does not support the
requested bit rate.

A: A transceiver with other supported bit rate than
the requested bit rate is inserted.

D: The transceiver with the non-…

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.4.2.2.1.1.67

wdmIfTrxMissing

An expected transceiver is missing.

A: An expected transceiver is missing.

D: The missing transceiver is inserted.

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.4.2.2.1.1.68

wdmIfTrxClass

String that describes the transceiver class.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.8708.2.4.2.2.1.1.69

wdmIfLaserTempHighRelativeThreshold

Threshold for the Laser Temp High alarm, expressed
as an offset from a pre-set nominal temperature,
in units of 0.1 degrees centigrade.

Integer32r/w

Constraints:
range: -100-100

.1.3.6.1.4.1.8708.2.4.2.2.1.1.70

wdmIfLaserTempLowRelativeThreshold

Threshold for the Laser Temp Low alarm, expressed
as an offset from a pre-set nominal temperature,
in units of 0.1 degrees centigrade.

Integer32r/w

Constraints:
range: -100-100

.1.3.6.1.4.1.8708.2.4.2.2.1.1.71

wdmIfTransmitterFailed

The transceiver HW has detected a failure
in the transmitter part.

A: The transmitter has failed

D: The transmitter is OK again

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.4.2.2.1.1.72

wdmIfReceiverSensitivity

The lowest power that the receiver is guaranteed
to handle, in units of 0.1 dBm.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.8708.2.4.2.2.1.1.73

wdmIfPowerLevelLowRelativeThreshold

The lower threshold for received power level in
units of 0.1 dB, relative to the receiver
sensitivity, or loss of signal threshold.

- For fixed transceivers it is measured with respect
to the loss thres…

Integer32r/w

Constraints:
range: -50-100

.1.3.6.1.4.1.8708.2.4.2.2.1.1.74

wdmIfIllegalFrequency

The frequency supported by the transceiver is not
recognized by the system.

A: Invalid or unknown frequency information is
detected in the (pluggable) transceiver or
board production data.
…

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.4.2.2.1.1.75

wdmIfLaserForcedOn

When enabled, the laser is on regardless of whether
there is a client signal or not.

disabled - the laser is only on when there is a
client signal.

enabled - the laser is always …

Enumerationr/w

Enumerated Values:

1	disabled
2	enabled

.1.3.6.1.4.1.8708.2.4.2.2.1.1.76

wdmIfTrafficCombination

Specifies how different traffic formats can be
combined on different ports on gxp2500, gxp2500Sfp,
fhmxp10g, msMxp10G and msMxp. All combinations
can not be used on all boards.

undefined - n…

Enumerationr/w

Enumerated Values:

0	undefined
1	fcGbEx2
2	fc2G
3	dvbEsconx8
4	esconx10
5	framedGbEx10
6	esconx6FcGbE
7	dvbEsconx4FcGbE
8	mixed
9	framedGbEx10Vc4
10	fcx2VcatVc4
11	fc2GVcatVc4
12	dvbEsconx8VcatVc4
13	mixedVcatVc4
14	fcGbEx2VcatVc4
15	gbEx3Stm1x5
16	gbEx2Stm4x2Stm1x4
17	gbEx3Stm4Oc12x1Stm1Oc3x3
18	gbEx1Stm16Oc48x1Stm1Oc3x3
19	gbEx4x2
20	gbEx4Stm16Oc48x2
21	stm16Oc48x4
22	gbEx2Fcx2x2
23	gbESyncEx3Stm4Oc12Stm1Oc3x1
24	gbEStm16Oc48Stm4Oc12Stm1Oc3
25	gbEStm16Oc48
26	syncEx14GLinex2
27	syncEx10
28	gbEx3Stm4Oc12x1Stm1Oc3x3Basic
29	gbESyncEx3Stm4Oc12Stm1Oc3x1Basic
30	cpri3x3syncEx2
31	syncEx1Cpri4x3

.1.3.6.1.4.1.8708.2.4.2.2.1.1.77

wdmIfSelectTrafficCombination

Select the traffic combination of the board.

LUM-TCCommandString

Description:

tbd

.1.3.6.1.4.1.8708.2.4.2.2.1.1.78

wdmIfObjectProperty

Property mask.

LUM-TCObjectProperty

Type Constraints:
range: 0..4294967295

Description:

A bitmask of length 32 encoding certain properties
of an object.

.1.3.6.1.4.1.8708.2.4.2.2.1.1.79

wdmIfTxPowerLevel

The transmitted power level in units of 0.1 dBm.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.8708.2.4.2.2.1.1.80

wdmIfLaserTempActual

The actual laser temperature in units of
0.1 degrees centigrade.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.8708.2.4.2.2.1.1.81

wdmIfTrxFailed

A transceiver hardware failure is detected.

A: The transceiver fails.

D: The transceiver is replaced.

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.4.2.2.1.1.82

wdmIfDisabled

The interface is disabled.

A: Interface disabled.

D: Interface enabled.

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.4.2.2.1.1.83

wdmIfLoopback

The interface is set in loopback mode.

A: Loopback enabled.

D: Loopback disabled.

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.4.2.2.1.1.84

wdmIfContinousOptimization

Continuously run the optimization of the
decision threshold.

enabled - continous optimization enabled.

disabled - continous optimization disabled.

Enumerationr/w

Enumerated Values:

1	disabled
2	enabled

.1.3.6.1.4.1.8708.2.4.2.2.1.1.85

wdmIfThresholdOptimizationResultCause

This text descibes the cause why the latest
optimize command failed. The information
is only valid if the thresholdOptimizationState
is finishedFailed.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.8708.2.4.2.2.1.1.86

wdmIfDistributionRole

Note: This attribute is deprecated!
The distribution role of the line function

- terminal: normal point-to-point operation
- broadcastHub: broadcast on both lines.
- broadcastSatellite: drop-and-continue

Enumerationr/w

Enumerated Values:

1	terminalMultiplexor
2	broadcastHub
3	broadcastSatellite

.1.3.6.1.4.1.8708.2.4.2.2.1.1.87

wdmIfConfigurationCommand

Note: This attribute is deprecated!

Select the operation mode of the line.

- terminal: normal point-to-point operation
- broadcastHub: broadcast on both lines.
- broadcastSatellite: drop-an…

LUM-TCCommandString

Description:

tbd

.1.3.6.1.4.1.8708.2.4.2.2.1.1.88

wdmIfNoFrequencySet

The tunable laser frequency has not been set.

A: Tunable laser frequency is not set.

D: Tunable laser frequency is set.

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.4.2.2.1.1.89

wdmIfFormat

The signal format

FecLan10GbE1A: iWDM 10G framing format type 1A (TPD10GBE-BU, GBE9/MXP10GFEC)
FecLan10GbE1B: iWDM 10G framing format type 1B (TPQ10GFEC, MS-MXP/10G,TPQ10GFECI)
Iwdm40Gb: iWDM 40G framing…

LUM-TCSignalFormatr/w

Type Values:

1	other
2	stm1
3	stm4
4	stm16
5	gbE
6	stm64
7	fc1Gb
8	fc2Gb
9	wan10GbE
10	unused
11	lan10GbE
12	escon
13	esconLL
14	dvb270
15	oc3
16	oc12
17	oc48
18	oc192
19	hdtv1485
20	ethernet
21	fastEthernet
22	lan10GbEFec
23	wan10GbEStm64Fec
24	fc4Gb
25	etr
26	auto
27	down
28	stm1Oc3
29	stm4Oc12
30	stm16Oc48
31	stm64Oc192
32	gbe9Line
34	ddgbeLine
35	gbEorTrm5500
36	fc8Gb
37	otu2
38	otu2e
39	e1
40	t1
41	mbh2Gb5
42	syncE
43	line4G
44	mbh4Gbps
45	fecLan10GbE1A
46	fecLan10GbE1B
47	sdi3G
48	iWdm4G
49	sdSdi270
50	hdtvNTSC
51	oc768
52	stm256
53	lan40GbE
54	wan40GbE
55	sfStm256Oc768
56	iwdm40Gb
57	otu4
58	lan100GbE
59	transpLan10GbE
60	cpri1
61	cpri2
62	cpri3
63	cpri4
64	cpri5
65	cpri6
66	cpri7
67	fc10Gb
68	fc16Gb
69	cpri8
70	obsai1x
71	obsai2x
72	obsai4x
73	obsai8x
74	otu1
75	iwdm11G
76	rw100G
77	rw200G
78	otu4SdFec
79	otuj1
80	otuj2
81	fc32Gb
82	clearChannel32GbFc
83	lan400GbE
84	flexO4
85	flexO2
86	openZRplus400
87	openZRplus200
88	lan25GbE
89	otuC2
90	otuC4
91	otuC1i
92	otuC2i
93	otuC1ix2
94	otuC4i
95	otuC1ix4
2147483647	notApplicable

Description:

Signal format for an interfaces.

other - Unspecified format (see bitrate configuration
for speed)

stm1 - STM-1 SDH signal

stm4 - STM-4 SDH signal

stm16 - STM-16 SDH signal
…

.1.3.6.1.4.1.8708.2.4.2.2.1.1.90

wdmIfConfigurationFormatCommand

Command to change the signal format.

OTU-2 can be selected.

LUM-TCCommandString

Description:

tbd

.1.3.6.1.4.1.8708.2.4.2.2.1.1.91

wdmIfOHTransparencydeprecated

Note: This attribute is deprecated!

The 'OH Transparency' setting shall be set to 'off'
for standard SDH/SONET mode. Does not work when
client wrapper is enabled.

When set to 'on', the foll…

Enumerationr/w

Enumerated Values:

1	off
2	on

.1.3.6.1.4.1.8708.2.4.2.2.1.1.92

wdmIfLinkDowndeprecated

Note: This attribute is deprecated!

A: Failure to negotiate a connection with the
other party.

D: A connection is negotiated.

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.4.2.2.1.1.93

wdmIfAutoNegotiationModedeprecated

Note: This attribute is deprecated!

The wanted auto negotiation mode.

off - auto negotiation process is disabled

on - auto negotiation process is enabled

Enumerationr/w

Enumerated Values:

1	off
2	on

.1.3.6.1.4.1.8708.2.4.2.2.1.1.94

wdmIfAutoNegotiationStatusdeprecated

Note: This attribute is deprecated!

The result of the auto negotiation procedure

incomplete - the result is still pending

half - half duplex

…

Enumeration

Enumerated Values:

1	incomplete
2	half
3	full

.1.3.6.1.4.1.8708.2.4.2.2.1.1.95

wdmIfFlowControlModedeprecated

Note: This attribute is deprecated!

The mode for handling of pause messages between
the peers.

noPause - PAUSE frame reception and
transmission is disabled

…

Enumerationr/w

Enumerated Values:

1	noPause
2	rxPause
3	txPause
4	bothPause

.1.3.6.1.4.1.8708.2.4.2.2.1.1.96

wdmIfGroupLineMode

Indicates whether the interface is grouped
into a ROADM-Line-group.

disabled - The interface is not grouped into
a ROADM-Line-group.

enabled - The interface is grouped into a
ROADM-Line-gro…

Enumeration

Enumerated Values:

1	disabled
2	enabled

.1.3.6.1.4.1.8708.2.4.2.2.1.1.97

wdmIfFecType

Set type of FEC.

enhancedFec - 2nd generation Enhanced FEC
(rate compatible with G.709
but > 2 dB additional coding
gain)

g709 - 1st genera…

Enumerationr/w

Enumerated Values:

1	enhancedFec
2	g709Fec

.1.3.6.1.4.1.8708.2.4.2.2.1.1.98

wdmIfFarEndLoopback

Loop the wdm RX signal back to the wdm TX.
This is also called Facility loopback.

disabled - the signal is not looped

enabled - the signal is looped.

Enumerationr/w

Enumerated Values:

1	disabled
2	enabled

.1.3.6.1.4.1.8708.2.4.2.2.1.1.99

wdmIfFarEndLoopbackTimeout

Timeout for far end loopback (a.k.a. facility
loopback) to make sure connection to node is
not lost if ppp link is broken.
The unit is hour. 0.1 means 6 minutes.

Integer32r/w

Constraints:
range: 0-1200

.1.3.6.1.4.1.8708.2.4.2.2.1.1.100

wdmIfFarEndLoopbackEnabled

Far end loopback (a.k.a. facility loopback)
is enabled.

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.4.2.2.1.1.101

wdmIfChangeLoopbackCommand

Command to change Loopback and loopbacktimeout

LUM-TCCommandString

Description:

tbd

.1.3.6.1.4.1.8708.2.4.2.2.1.1.102

wdmIfFecFailure

Too many errors to get valid FEC statistics. It is not
possible to run control loops based on FEC statistics.

A: Too many errors to get valid FEC statistics.

D: The FEC statistics is valid.

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.4.2.2.1.1.103

wdmIfTxSignalStatus

The operational state for outgoing (TX) signal
of the interface.

down - A fault that would lead to a protection
switch has occurred.

degraded - The signal quality is impaired.
…

Enumeration

Enumerated Values:

1	down
2	degraded
3	up
2147483647	notApplicable

.1.3.6.1.4.1.8708.2.4.2.2.1.1.104

wdmIfRxSignalStatus

The operational state for incoming (RX) signal
of the interface.

down - A major fault has occurred

degraded - The signal quality is impaired.

up - The signal is OK.
…

Enumeration

Enumerated Values:

1	down
2	degraded
3	up
2147483647	notApplicable

.1.3.6.1.4.1.8708.2.4.2.2.1.1.105

wdmIfNearEndLoopback

Loop the wdm TX signal back to the wdm RX.
This is also called Terminal loopback.

disabled - the signal is not looped

enabled - the signal is looped.

Enumerationr/w

Enumerated Values:

1	disabled
2	enabled

.1.3.6.1.4.1.8708.2.4.2.2.1.1.106

wdmIfNearEndLoopbackTimeout

Timeout for near end loopback (a.k.a. terminal
loopback) to make sure connection to node is
not lost if ppp link is broken.
The unit is hours. 0.1 means 6 minutes.

Integer32r/w

Constraints:
range: 0-1200

.1.3.6.1.4.1.8708.2.4.2.2.1.1.107

wdmIfNearEndLoopbackEnabled

Near end loopback (a.k.a. terminal loopback)
is enabled.

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.4.2.2.1.1.108

wdmIfChangeNearEndLoopbackCommand

Command to change near end loopback (a.k.a.
terminal loopback) and loopbacktimeout

LUM-TCCommandString

Description:

tbd

.1.3.6.1.4.1.8708.2.4.2.2.1.1.109

wdmIfSignalDegraded

Too many error corrected.
If more errors are corrected
it might effect the client signal
in a negative way.

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.4.2.2.1.1.110

wdmIfHubProtectionMode

Choose if the line should be used in
hub protection. (needs to be setup in mba)

disabled - Port is not in hub protection (default)

enabled - Hub protection is enabled

Enumerationr/w

Enumerated Values:

1	disabled
2	enabled

.1.3.6.1.4.1.8708.2.4.2.2.1.1.111

wdmIfActualFormat

The actual signal format.

LUM-TCSignalFormat

Type Values:

1	other
2	stm1
3	stm4
4	stm16
5	gbE
6	stm64
7	fc1Gb
8	fc2Gb
9	wan10GbE
10	unused
11	lan10GbE
12	escon
13	esconLL
14	dvb270
15	oc3
16	oc12
17	oc48
18	oc192
19	hdtv1485
20	ethernet
21	fastEthernet
22	lan10GbEFec
23	wan10GbEStm64Fec
24	fc4Gb
25	etr
26	auto
27	down
28	stm1Oc3
29	stm4Oc12
30	stm16Oc48
31	stm64Oc192
32	gbe9Line
34	ddgbeLine
35	gbEorTrm5500
36	fc8Gb
37	otu2
38	otu2e
39	e1
40	t1
41	mbh2Gb5
42	syncE
43	line4G
44	mbh4Gbps
45	fecLan10GbE1A
46	fecLan10GbE1B
47	sdi3G
48	iWdm4G
49	sdSdi270
50	hdtvNTSC
51	oc768
52	stm256
53	lan40GbE
54	wan40GbE
55	sfStm256Oc768
56	iwdm40Gb
57	otu4
58	lan100GbE
59	transpLan10GbE
60	cpri1
61	cpri2
62	cpri3
63	cpri4
64	cpri5
65	cpri6
66	cpri7
67	fc10Gb
68	fc16Gb
69	cpri8
70	obsai1x
71	obsai2x
72	obsai4x
73	obsai8x
74	otu1
75	iwdm11G
76	rw100G
77	rw200G
78	otu4SdFec
79	otuj1
80	otuj2
81	fc32Gb
82	clearChannel32GbFc
83	lan400GbE
84	flexO4
85	flexO2
86	openZRplus400
87	openZRplus200
88	lan25GbE
89	otuC2
90	otuC4
91	otuC1i
92	otuC2i
93	otuC1ix2
94	otuC4i
95	otuC1ix4
2147483647	notApplicable

Description:

Signal format for an interfaces.

other - Unspecified format (see bitrate configuration
for speed)

stm1 - STM-1 SDH signal

stm4 - STM-4 SDH signal

stm16 - STM-16 SDH signal
…

.1.3.6.1.4.1.8708.2.4.2.2.1.1.112

wdmIfTdcDispersion

Shows current dispersion value in the unit.

Integer32r/w

Constraints:
range: -800-800

.1.3.6.1.4.1.8708.2.4.2.2.1.1.113

wdmIfTdcDispersionCommand

Sets state and dispersion in the unit.

LUM-TCCommandString

Description:

tbd

.1.3.6.1.4.1.8708.2.4.2.2.1.1.114

wdmIfTdcDispersionMode

States the current mode of the TDC dispersion.

Mode:
auto - The TDC is in auto optimising state.

startValue - Starts with the desired value,
then it goes to auto af…

Enumerationr/w

Enumerated Values:

0	auto
1	startValue
2	manual

.1.3.6.1.4.1.8708.2.4.2.2.1.1.115

wdmIfLineControlLoopCurrentState

The current state of the unit. The unit
is ready if state=Automatic fine-tuning.

The states could be one of the followings:

Init DPSK.

DPSK Tx Locked.

Init EDF…

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.8708.2.4.2.2.1.1.116

wdmIfSignalDegradeThreshold

Threshold for signal degraded alarm,
based on BER value.

The threshold is settable on the first
line port, affecting all line ports.

Predefined BER levels
rxBerLevel1 = 1E-12
rxBerLevel2 = …

LUM-TCBerLevelr/w

Type Values:

12	rxBerLevel1
13	rxBerLevel2
15	rxBerLevel3

Description:

Predefined BER levels for signal degraded alarm

rxBerLevel1 = 1E-12
rxBerLevel2 = 1E-13
rxBerLevel3 = 1E-15

.1.3.6.1.4.1.8708.2.4.2.2.1.1.117

wdmIfTrxThresholdOptimizationState

Threshold Optimization State.

Idle - No regulation done

Searching - Rough threshold regulation
is being performed

Optimizing …

Enumeration

Enumerated Values:

1	idle
2	searching
3	optimizing
4	steadyState
5	failedTrafficLoss
6	failedLOS

.1.3.6.1.4.1.8708.2.4.2.2.1.1.118

wdmIfTrxDecisionThreshold

The threshold is automatically optimized if the
'Continous optimization' functionality is enabled.
Press the 'Optimize' button to manually trigger
the optimization routine once.

Integer32

Constraints:
range: 0-100

.1.3.6.1.4.1.8708.2.4.2.2.1.1.119

wdmIfSwControlledLaserShutdown

enabled - the laser is turned off for a specified time, until the timer expires
disabled - normal state

Enumeration

Enumerated Values:

1	disabled
2	enabled

.1.3.6.1.4.1.8708.2.4.2.2.1.1.120

wdmIfChangeSwControlledLaserShutdownCommand

Command to shut the laser down for a user-defined period of time.
This setting will over-ride other laser control functions like ALS and protection.
The timer can be selected in minutes: [1..30] minutes.
When the timer …

LUM-TCCommandString

Description:

tbd

.1.3.6.1.4.1.8708.2.4.2.2.1.1.121

wdmIfControlledLaserShutdownEnabled

Software controlled laser shutdown is enabled.
Activation - When the command is successfully applied.
De-activation - When the timer expires, or the operation is manually cancelled.

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.4.2.2.1.1.122

wdmIfAid

The access identifier (AID) of the interface.
The format is according to GR-833.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.8708.2.4.2.2.1.1.123

wdmIfPhysicalLocation

The physical location of the if.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.8708.2.4.2.2.1.1.124

wdmIfTrxTunable

The transceiver is of tunable type.

true - Inserted TRX is of tunable type
false - Inserted TRX is not of tunable type
notAvailable - Attribute is not available under current circumst…

LUM-TCTruthValueWithNA

Type Values:

0	true
1	false
2147483646	notAvailable
2147483647	notApplicable

Description:

Defines a value that can be true, false or not available

true - The condition is false

false - The condition is not true

notAvailable (2147483646) is used when attribute is
…

.1.3.6.1.4.1.8708.2.4.2.2.1.1.125

wdmProtTable

table

.1.3.6.1.4.1.8708.2.4.2.3.1 · 1 row entry · 39 columns

Open in standard view

Uses the infinera variant from /opt/observium/mibs/infinera.

Command help

Walk wdmProtTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-WDM-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-WDM-MIB::wdmProtTable'

The protection group table.

wdmProtEntry row .1.3.6.1.4.1.8708.2.4.2.3.1.1

An entry in the protection group table.

Indexes

wdmProtIndex

Column Syntax OID

wdmProtIndex

An arbitrary index assigned to each entry.

Unsigned32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.8708.2.4.2.3.1.1.1

wdmProtName

The name of the object, for example
'pg:1:2:1-2:1:3:1-2', where the numbers indicate the
subrack, slot and TX-RX port number for the left and
right interface of the group.

The interface is either a client…

LUM-TCMgmtNameString

Type Constraints:
range: 0..255

Description:

An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.

.1.3.6.1.4.1.8708.2.4.2.3.1.1.2

wdmProtDescr

User configurable label.

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.8708.2.4.2.3.1.1.3

wdmProtRightSubrack

The subrack number for this protected
interface.

LUM-TCSubrackNumberr/w

Type Constraints:
range: 0..15

Description:

The number of a subrack within a network element.

0 signifies an undefined subrack number.

.1.3.6.1.4.1.8708.2.4.2.3.1.1.4

wdmProtRightSlot

The slot number for this protected
interface.

LUM-TCSlotNumberr/w

Type Constraints:
range: 0..22

Description:

The number of a slot within a subrack.

0 signifies an undefined slot number.

.1.3.6.1.4.1.8708.2.4.2.3.1.1.5

wdmProtRightPort

The port number for the TX side of this
protected interface. Not necessary for boards
with only one interface.

LUM-TCPortNumberr/w

Type Constraints:
range: 0..116

Description:

The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.

.1.3.6.1.4.1.8708.2.4.2.3.1.1.6

wdmProtLeftSubrack

The subrack number for the other protected
interface.

LUM-TCSubrackNumberr/w

Type Constraints:
range: 0..15

Description:

The number of a subrack within a network element.

0 signifies an undefined subrack number.

.1.3.6.1.4.1.8708.2.4.2.3.1.1.7

wdmProtLeftSlot

The slot number for the other protected
interface.

LUM-TCSlotNumberr/w

Type Constraints:
range: 0..22

Description:

The number of a slot within a subrack.

0 signifies an undefined slot number.

.1.3.6.1.4.1.8708.2.4.2.3.1.1.8

wdmProtLeftPort

The port number for the TX side of the other
protected interface. Not necessary for boards
with only one interface.

LUM-TCPortNumberr/w

Type Constraints:
range: 0..116

Description:

The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.

.1.3.6.1.4.1.8708.2.4.2.3.1.1.9

wdmProtLastChangeTime

The time the operational state of the protection
group was last changed.

SNMPv2-TCDateAndTime

Type Constraints:
range: 8
range: 11

Description:

A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …

.1.3.6.1.4.1.8708.2.4.2.3.1.1.10

wdmProtAdminStatus

The administrative state for the protection
group.

down - The protection group is inactive.

leftForced - The left side is forced active.

rightForced - The right side is force…

Enumerationr/w

Enumerated Values:

1	down
2	leftForced
3	rightForced
4	auto
5	toggle

.1.3.6.1.4.1.8708.2.4.2.3.1.1.11

wdmProtOperStatusdeprecated

Note: This object is deprecated.

The operational state for the protection group.

bothDown - both sides down

leftDownRightUp - left side down, right side up

lef…

Enumeration

Enumerated Values:

1	bothDown
2	leftDownRightUp
3	leftDownRightStandby
4	leftStandbyRightDown
5	leftStandbyRightUp
6	leftUpRightDown
7	leftUpRightStandby

.1.3.6.1.4.1.8708.2.4.2.3.1.1.12

wdmProtRowStatus

Manages creation and deletion of conceptual rows.
See also SNMPv2-TC.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …

.1.3.6.1.4.1.8708.2.4.2.3.1.1.13

wdmProtServiceDegraded

Protection service degraded.

A: One of the sides of the protection group has
signal failure or one side is forced active.

D: Both sides of the protection group are
available (The signal is …

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.4.2.3.1.1.14

wdmProtServiceFailure

Protection service failure.

A: Both sides of the protection group has
signal failure or the side that is forced
active has signal failure.

D: One of the sides of the protection group
is ava…

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.4.2.3.1.1.15

wdmProtActiveSide

The operational state for the protection group.

none - no side is active.

left - the left side is active.

right - the right side is active.

Enumeration

Enumerated Values:

1	none
2	left
3	right

.1.3.6.1.4.1.8708.2.4.2.3.1.1.16

wdmProtLeftStatus

The operational state for the left side of the
protection group.

down - this side is out of service.

up - this side is active.

Enumeration

Enumerated Values:

1	down
2	up

.1.3.6.1.4.1.8708.2.4.2.3.1.1.17

wdmProtRightStatus

The operational state for the right side of
the protection group.

down - this side is out of service.

up - this side is active.

Enumeration

Enumerated Values:

1	down
2	up

.1.3.6.1.4.1.8708.2.4.2.3.1.1.18

wdmProtProtectionType

Different types of protection realisation
and modelling. The information is intended
for the TNM.

eqAndFiberProtection - multiple boards,
e.g. two tpMr2500 or tpMr25v2
…

Enumeration

Enumerated Values:

0	eqAndFiberProtection
1	fiberProtectionI
2	fiberProtectionII
3	fiberProtectionIII
4	fiberProtectionIIII
5	singleEndedBiDirLineProtection

.1.3.6.1.4.1.8708.2.4.2.3.1.1.19

wdmProtObjectProperty

Property mask.

LUM-TCObjectProperty

Type Constraints:
range: 0..4294967295

Description:

A bitmask of length 32 encoding certain properties
of an object.

.1.3.6.1.4.1.8708.2.4.2.3.1.1.20

wdmProtWrapperMode

Defines how the wrapper will operate
in correlation with the traffic switch.

followTraffic - use the same interface
as the traffic is selected from.

fixedToDefaultInterface - wrapper is fix…

Enumerationr/w

Enumerated Values:

1	followTraffic
2	fixedToDefault

.1.3.6.1.4.1.8708.2.4.2.3.1.1.21

wdmProtWrapperState

Shows which interface that currently
is used for wrapper communication.

Enumeration

Enumerated Values:

1	none
2	left
3	right

.1.3.6.1.4.1.8708.2.4.2.3.1.1.22

wdmProtLeftCommSubrack

The subrack number of the left communication link
for this protection group.

LUM-TCSubrackNumberr/w

Type Constraints:
range: 0..15

Description:

The number of a subrack within a network element.

0 signifies an undefined subrack number.

.1.3.6.1.4.1.8708.2.4.2.3.1.1.23

wdmProtLeftCommSlot

The slot number of the left communication link for
this protection group.

LUM-TCSlotNumberr/w

Type Constraints:
range: 0..22

Description:

The number of a slot within a subrack.

0 signifies an undefined slot number.

.1.3.6.1.4.1.8708.2.4.2.3.1.1.24

wdmProtLeftCommPort

The port number of the left communication link for
this protection group

LUM-TCPortNumberr/w

Type Constraints:
range: 0..116

Description:

The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.

.1.3.6.1.4.1.8708.2.4.2.3.1.1.25

wdmProtRightCommSubrack

The subrack number of the right communication link
for this protection group.

LUM-TCSubrackNumberr/w

Type Constraints:
range: 0..15

Description:

The number of a subrack within a network element.

0 signifies an undefined subrack number.

.1.3.6.1.4.1.8708.2.4.2.3.1.1.26

wdmProtRightCommSlot

The slot number of the right communication link for
this protection group.

LUM-TCSlotNumberr/w

Type Constraints:
range: 0..22

Description:

The number of a slot within a subrack.

0 signifies an undefined slot number.

.1.3.6.1.4.1.8708.2.4.2.3.1.1.27

wdmProtRightCommPort

The port number of the right communication link for
this protection group

LUM-TCPortNumberr/w

Type Constraints:
range: 0..116

Description:

The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.

.1.3.6.1.4.1.8708.2.4.2.3.1.1.28

wdmProtLeftCommInterface

The interface used for the left communication link
for this protection group.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.8708.2.4.2.3.1.1.29

wdmProtRightCommInterface

The interface used for the right communication link
for this protection group.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.8708.2.4.2.3.1.1.30

wdmProtCommunicationFailure

Protection group communication failure

A: There are several underlying criterias for this:
- Loss of signal on the communication link
- Errors on the communication link
- Supervision failures
…

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.4.2.3.1.1.31

wdmProtHubTrafficConfigMismatch

Traffic configuration received over the two lines differ.

A: The traffic configuration received
over the two lines do not match.

D: Both lines have the same traffic configuration

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.4.2.3.1.1.32

wdmProtSignalDegradeProtection

Include signal degraded alarm as a protection
switch criteria.

Enumerationr/w

Enumerated Values:

0	disabled
1	enabled

.1.3.6.1.4.1.8708.2.4.2.3.1.1.33

wdmProtRevertiveSwitchWtrTimer

When revertive mode is enabled and traffic is running on
secondary path, this timer decides when to switch back to
primary path (when the primary path is up and working again).

Please note! To make sure t…

Unsigned32r/w

Constraints:
range: 1-1440

.1.3.6.1.4.1.8708.2.4.2.3.1.1.34

wdmProtRevertiveSwitch

If revertive protection switch is enabled, the primary
path will automaticly be chosen as working path
if it is operational. A switch back to the primary
path will however be delayed with the period of time
given by the…

Enumerationr/w

Enumerated Values:

0	disabled
1	enabled

.1.3.6.1.4.1.8708.2.4.2.3.1.1.35

wdmProtRevertiveSwitchPrimaryPath

The interface in the protection group that should be used
as prefered working path.

Enumerationr/w

Enumerated Values:

2	left
3	right

.1.3.6.1.4.1.8708.2.4.2.3.1.1.36

wdmProtRevertiveSwitchSecondaryPath

The interface in the protection group that is used as
prefered protection path. This is set automatically when
choosing the primary working path.

Enumeration

Enumerated Values:

2	left
3	right

.1.3.6.1.4.1.8708.2.4.2.3.1.1.37

wdmProtSecondaryPathUsed

Alarm indicating that the alternative secondary path is currently used,
when revertive switching is enabled.

A: Secondary path is used as working path.

D: Primary path is used as working pa…

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.4.2.3.1.1.38

wdmProtSwitchLastChangeTime

The time when the switch between left and right protection
was last changed.

SNMPv2-TCDateAndTime

Type Constraints:
range: 8
range: 11

Description:

A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …

.1.3.6.1.4.1.8708.2.4.2.3.1.1.39

wdmPassiveIfTable

table

.1.3.6.1.4.1.8708.2.4.2.5.1 · 1 row entry · 23 columns

Open in standard view

Uses the infinera variant from /opt/observium/mibs/infinera.

Command help

Walk wdmPassiveIfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-WDM-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-WDM-MIB::wdmPassiveIfTable'

The interface list.

wdmPassiveIfEntry row .1.3.6.1.4.1.8708.2.4.2.5.1.1

An entry in the interface list.
Each interface consists of a uni- or
bi-directional port.

Indexes

wdmPassiveIfIndex

Column Syntax OID

wdmPassiveIfIndex

An arbitrary index assigned to each entry.

Unsigned32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.8708.2.4.2.5.1.1.1

wdmPassiveIfName

The management name of the interface, for
example 'wdmi:1:2:1', where the first number
indicates sub-rack, the second slot number and
the third is the port number.

LUM-TCMgmtNameString

Type Constraints:
range: 0..255

Description:

An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.

.1.3.6.1.4.1.8708.2.4.2.5.1.1.2

wdmPassiveIfDescr

User configurable label.

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.8708.2.4.2.5.1.1.3

wdmPassiveIfSubrack

The number of the subrack where the interface
is located.

LUM-TCSubrackNumber

Type Constraints:
range: 0..15

Description:

The number of a subrack within a network element.

0 signifies an undefined subrack number.

.1.3.6.1.4.1.8708.2.4.2.5.1.1.5

wdmPassiveIfSlot

The number of the slot where the interface is
located.

LUM-TCSlotNumber

Type Constraints:
range: 0..22

Description:

The number of a slot within a subrack.

0 signifies an undefined slot number.

.1.3.6.1.4.1.8708.2.4.2.5.1.1.6

wdmPassiveIfPort

The number of the port where the interface
is located.

LUM-TCPortNumber

Type Constraints:
range: 0..116

Description:

The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.

.1.3.6.1.4.1.8708.2.4.2.5.1.1.7

wdmPassiveIfInvPhysIndexOrZero

The row in the invPhysTable for this interface.
Set to 0 if not known.

Unsigned32

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.8708.2.4.2.5.1.1.8

wdmPassiveIfDirection

The type of signal the interface expects.

rx - Only ingoing signal.
LambdaType, LambdaMin and LambdaMax indicates the
frequency properties for the ingoing signal.

tx - Only outgoing signal.…

LUM-TCPortType

Type Values:

1	rx
2	tx
3	biDi

Description:

tbd description
tbd rxTx?

.1.3.6.1.4.1.8708.2.4.2.5.1.1.9

wdmPassiveIfLambdaType

The type of wavelengths the port of the
interface can accomodate.

fixed - The port received or transmits a fixed
frequency.

range - The port can handle a range of
frequencies. Not used.
…

LUM-TCLambdaType

Type Values:

1	fixed
2	range
3	transparent
4	interleavedOdd
5	interleavedEven
6	interleaved50GHzOdd
7	interleaved50GhzEven

Description:

Indicates the type of wavelength a port can
accomodate.

fixed - The port received or transmits a fixed
frequency.

range - The port can handle a range of
frequencies.

transparent - There …

.1.3.6.1.4.1.8708.2.4.2.5.1.1.10

wdmPassiveIfLambda

The frequency given in hundreds of GHz
(0.01 GHz). Set to 0 for transparent ports.

LUM-TCLambdaFrequency

Type Values:

0	undefined
1	iWdmPonFrequency
2	otclg
130	b1300
150	b1500
850	w850
1270	w1270
1290	w1290
1310	w1310
1330	w1330
1350	w1350
1370	w1370
1390	w1390
1410	w1410
1430	w1430
1450	w1450
1470	w1470
1490	w1490
1510	w1510
1530	w1530
1550	w1550
1570	w1570
1590	w1590
1610	w1610
1611	w1611
18710	ch871
18730	ch873
18750	ch875
18770	ch877
18790	ch879
18810	ch881
18830	ch883
18850	ch885
18870	ch887
18890	ch889
18910	ch891
18930	ch893
18950	ch895
18970	ch897
18990	ch899
19010	ch901
19030	ch903
19050	ch905
19070	ch907
19090	ch909
19135	ch9135
19140	ch914
19145	ch9145
19150	ch915
19155	ch9155
19160	ch916
19165	ch9165
19170	ch917
19175	ch9175
19180	ch918
19185	ch9185
19190	ch919
19195	ch9195
19200	ch920
19205	ch9205
19210	ch921
19215	ch9215
19220	ch922
19225	ch9225
19230	ch923
19235	ch9235
19240	ch924
19245	ch9245
19250	ch925
19255	ch9255
19260	ch926
19265	ch9265
19270	ch927
19275	ch9275
19280	ch928
19285	ch9285
19290	ch929
19295	ch9295
19300	ch930
19305	ch9305
19310	ch931
19315	ch9315
19320	ch932
19325	ch9325
19330	ch933
19335	ch9335
19340	ch934
19345	ch9345
19350	ch935
19355	ch9355
19360	ch936
19365	ch9365
19370	ch937
19375	ch9375
19380	ch938
19385	ch9385
19390	ch939
19395	ch9395
19400	ch940
19405	ch9405
19410	ch941
19415	ch9415
19420	ch942
19425	ch9425
19430	ch943
19435	ch9435
19440	ch944
19445	ch9445
19450	ch945
19455	ch9455
19460	ch946
19465	ch9465
19470	ch947
19475	ch9475
19480	ch948
19485	ch9485
19490	ch949
19495	ch9495
19500	ch950
19505	ch9505
19510	ch951
19515	ch9515
19520	ch952
19525	ch9525
19530	ch953
19535	ch9535
19540	ch954
19545	ch9545
19550	ch955
19555	ch9555
19560	ch956
19565	ch9565
19570	ch957
19575	ch9575
19580	ch958
19585	ch9585
19590	ch959
19595	ch9595
19600	ch960
19605	ch9605
19610	ch961

Description:

The frequency of the 'wavelength' given in hundreds
of GHz (0.01 GHz).

.1.3.6.1.4.1.8708.2.4.2.5.1.1.11

wdmPassiveIfLambdaMax

The maximum frequency (for the 'wavelength')
in GHz.

LUM-TCLambdaFrequency

Type Values:

0	undefined
1	iWdmPonFrequency
2	otclg
130	b1300
150	b1500
850	w850
1270	w1270
1290	w1290
1310	w1310
1330	w1330
1350	w1350
1370	w1370
1390	w1390
1410	w1410
1430	w1430
1450	w1450
1470	w1470
1490	w1490
1510	w1510
1530	w1530
1550	w1550
1570	w1570
1590	w1590
1610	w1610
1611	w1611
18710	ch871
18730	ch873
18750	ch875
18770	ch877
18790	ch879
18810	ch881
18830	ch883
18850	ch885
18870	ch887
18890	ch889
18910	ch891
18930	ch893
18950	ch895
18970	ch897
18990	ch899
19010	ch901
19030	ch903
19050	ch905
19070	ch907
19090	ch909
19135	ch9135
19140	ch914
19145	ch9145
19150	ch915
19155	ch9155
19160	ch916
19165	ch9165
19170	ch917
19175	ch9175
19180	ch918
19185	ch9185
19190	ch919
19195	ch9195
19200	ch920
19205	ch9205
19210	ch921
19215	ch9215
19220	ch922
19225	ch9225
19230	ch923
19235	ch9235
19240	ch924
19245	ch9245
19250	ch925
19255	ch9255
19260	ch926
19265	ch9265
19270	ch927
19275	ch9275
19280	ch928
19285	ch9285
19290	ch929
19295	ch9295
19300	ch930
19305	ch9305
19310	ch931
19315	ch9315
19320	ch932
19325	ch9325
19330	ch933
19335	ch9335
19340	ch934
19345	ch9345
19350	ch935
19355	ch9355
19360	ch936
19365	ch9365
19370	ch937
19375	ch9375
19380	ch938
19385	ch9385
19390	ch939
19395	ch9395
19400	ch940
19405	ch9405
19410	ch941
19415	ch9415
19420	ch942
19425	ch9425
19430	ch943
19435	ch9435
19440	ch944
19445	ch9445
19450	ch945
19455	ch9455
19460	ch946
19465	ch9465
19470	ch947
19475	ch9475
19480	ch948
19485	ch9485
19490	ch949
19495	ch9495
19500	ch950
19505	ch9505
19510	ch951
19515	ch9515
19520	ch952
19525	ch9525
19530	ch953
19535	ch9535
19540	ch954
19545	ch9545
19550	ch955
19555	ch9555
19560	ch956
19565	ch9565
19570	ch957
19575	ch9575
19580	ch958
19585	ch9585
19590	ch959
19595	ch9595
19600	ch960
19605	ch9605
19610	ch961

Description:

The frequency of the 'wavelength' given in hundreds
of GHz (0.01 GHz).

.1.3.6.1.4.1.8708.2.4.2.5.1.1.12

wdmPassiveIfLastChangeTimedeprecated

The time when the state of the interface entry
was last changed.

SNMPv2-TCDateAndTime

Type Constraints:
range: 8
range: 11

Description:

A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …

.1.3.6.1.4.1.8708.2.4.2.5.1.1.13

wdmPassiveIfExpectedLambda

The frequency of the 'wavelength' given in
hundreds of GHz (0.01 GHz).
This attribute can be written via SNMP.

LUM-TCLambdaFrequencyr/w

Type Values:

0	undefined
1	iWdmPonFrequency
2	otclg
130	b1300
150	b1500
850	w850
1270	w1270
1290	w1290
1310	w1310
1330	w1330
1350	w1350
1370	w1370
1390	w1390
1410	w1410
1430	w1430
1450	w1450
1470	w1470
1490	w1490
1510	w1510
1530	w1530
1550	w1550
1570	w1570
1590	w1590
1610	w1610
1611	w1611
18710	ch871
18730	ch873
18750	ch875
18770	ch877
18790	ch879
18810	ch881
18830	ch883
18850	ch885
18870	ch887
18890	ch889
18910	ch891
18930	ch893
18950	ch895
18970	ch897
18990	ch899
19010	ch901
19030	ch903
19050	ch905
19070	ch907
19090	ch909
19135	ch9135
19140	ch914
19145	ch9145
19150	ch915
19155	ch9155
19160	ch916
19165	ch9165
19170	ch917
19175	ch9175
19180	ch918
19185	ch9185
19190	ch919
19195	ch9195
19200	ch920
19205	ch9205
19210	ch921
19215	ch9215
19220	ch922
19225	ch9225
19230	ch923
19235	ch9235
19240	ch924
19245	ch9245
19250	ch925
19255	ch9255
19260	ch926
19265	ch9265
19270	ch927
19275	ch9275
19280	ch928
19285	ch9285
19290	ch929
19295	ch9295
19300	ch930
19305	ch9305
19310	ch931
19315	ch9315
19320	ch932
19325	ch9325
19330	ch933
19335	ch9335
19340	ch934
19345	ch9345
19350	ch935
19355	ch9355
19360	ch936
19365	ch9365
19370	ch937
19375	ch9375
19380	ch938
19385	ch9385
19390	ch939
19395	ch9395
19400	ch940
19405	ch9405
19410	ch941
19415	ch9415
19420	ch942
19425	ch9425
19430	ch943
19435	ch9435
19440	ch944
19445	ch9445
19450	ch945
19455	ch9455
19460	ch946
19465	ch9465
19470	ch947
19475	ch9475
19480	ch948
19485	ch9485
19490	ch949
19495	ch9495
19500	ch950
19505	ch9505
19510	ch951
19515	ch9515
19520	ch952
19525	ch9525
19530	ch953
19535	ch9535
19540	ch954
19545	ch9545
19550	ch955
19555	ch9555
19560	ch956
19565	ch9565
19570	ch957
19575	ch9575
19580	ch958
19585	ch9585
19590	ch959
19595	ch9595
19600	ch960
19605	ch9605
19610	ch961

Description:

The frequency of the 'wavelength' given in hundreds
of GHz (0.01 GHz).

.1.3.6.1.4.1.8708.2.4.2.5.1.1.14

wdmPassiveIfUnexpectedLambda

The actual frequency does not match the
hundreds of GHz (0.01 GHz).

The actual frequency does not match the
pre-configured frequency.

A pre-configured frequency of '0' matches
all actual fr…

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.4.2.5.1.1.15

wdmPassiveIfAdminStatus

The administrative state for the
port.

down - The alarm are inhibited

up - Alarms are reported

Enumerationr/w

Enumerated Values:

1	down
2	up

.1.3.6.1.4.1.8708.2.4.2.5.1.1.16

wdmPassiveIfOperStatus

The operational state for the
port.

notPresent - The board is missing

down - Admin down

up - The board is present and admin up

LUM-TCBoardOrInterfaceOperStatus

Type Values:

1	notPresent
2	down
3	up

Description:

.1.3.6.1.4.1.8708.2.4.2.5.1.1.17

wdmPassiveIfObjectProperty

Property mask.

LUM-TCObjectProperty

Type Constraints:
range: 0..4294967295

Description:

A bitmask of length 32 encoding certain properties
of an object.

.1.3.6.1.4.1.8708.2.4.2.5.1.1.18

wdmPassiveIfExpectedLambdaMax

The Max frequency of the 'wavelength' range
given in hundreds of GHz (0.01 GHz).
This attribute can be written via SNMP.

LUM-TCLambdaFrequencyr/w

Type Values:

0	undefined
1	iWdmPonFrequency
2	otclg
130	b1300
150	b1500
850	w850
1270	w1270
1290	w1290
1310	w1310
1330	w1330
1350	w1350
1370	w1370
1390	w1390
1410	w1410
1430	w1430
1450	w1450
1470	w1470
1490	w1490
1510	w1510
1530	w1530
1550	w1550
1570	w1570
1590	w1590
1610	w1610
1611	w1611
18710	ch871
18730	ch873
18750	ch875
18770	ch877
18790	ch879
18810	ch881
18830	ch883
18850	ch885
18870	ch887
18890	ch889
18910	ch891
18930	ch893
18950	ch895
18970	ch897
18990	ch899
19010	ch901
19030	ch903
19050	ch905
19070	ch907
19090	ch909
19135	ch9135
19140	ch914
19145	ch9145
19150	ch915
19155	ch9155
19160	ch916
19165	ch9165
19170	ch917
19175	ch9175
19180	ch918
19185	ch9185
19190	ch919
19195	ch9195
19200	ch920
19205	ch9205
19210	ch921
19215	ch9215
19220	ch922
19225	ch9225
19230	ch923
19235	ch9235
19240	ch924
19245	ch9245
19250	ch925
19255	ch9255
19260	ch926
19265	ch9265
19270	ch927
19275	ch9275
19280	ch928
19285	ch9285
19290	ch929
19295	ch9295
19300	ch930
19305	ch9305
19310	ch931
19315	ch9315
19320	ch932
19325	ch9325
19330	ch933
19335	ch9335
19340	ch934
19345	ch9345
19350	ch935
19355	ch9355
19360	ch936
19365	ch9365
19370	ch937
19375	ch9375
19380	ch938
19385	ch9385
19390	ch939
19395	ch9395
19400	ch940
19405	ch9405
19410	ch941
19415	ch9415
19420	ch942
19425	ch9425
19430	ch943
19435	ch9435
19440	ch944
19445	ch9445
19450	ch945
19455	ch9455
19460	ch946
19465	ch9465
19470	ch947
19475	ch9475
19480	ch948
19485	ch9485
19490	ch949
19495	ch9495
19500	ch950
19505	ch9505
19510	ch951
19515	ch9515
19520	ch952
19525	ch9525
19530	ch953
19535	ch9535
19540	ch954
19545	ch9545
19550	ch955
19555	ch9555
19560	ch956
19565	ch9565
19570	ch957
19575	ch9575
19580	ch958
19585	ch9585
19590	ch959
19595	ch9595
19600	ch960
19605	ch9605
19610	ch961

Description:

The frequency of the 'wavelength' given in hundreds
of GHz (0.01 GHz).

.1.3.6.1.4.1.8708.2.4.2.5.1.1.19

wdmPassiveIfAid

The access identifier (AID) of the interface.
The format is according to GR-833.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.8708.2.4.2.5.1.1.20

wdmPassiveIfPhysicalLocation

The physical location of the if.
The format is according to GR-833.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.8708.2.4.2.5.1.1.21

wdmPassiveIfIfNo

The number of the port where the interface
is located.

LUM-TCPortNumber

Type Constraints:
range: 0..116

Description:

The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.

.1.3.6.1.4.1.8708.2.4.2.5.1.1.22

wdmPassiveIfFrequencyFlex

The frequency given in unit of THz.
Set to 0 for transparent ports.

LUM-TCXCBandFrequencyRange

Type Constraints:
range: 191325000..196125000

Description:

Extended C band frequency range

.1.3.6.1.4.1.8708.2.4.2.5.1.1.23

wdmPassiveIfExpectedFrequencyFlex

The frequency given in unit of THz.

LUM-TCXCBandFrequencyRange

Type Constraints:
range: 191325000..196125000

Description:

Extended C band frequency range

.1.3.6.1.4.1.8708.2.4.2.5.1.1.24

wdmVc4Table

table

.1.3.6.1.4.1.8708.2.4.2.6.1 · 1 row entry · 17 columns

Open in standard view

Uses the infinera variant from /opt/observium/mibs/infinera.

Command help

Walk wdmVc4Table

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-WDM-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-WDM-MIB::wdmVc4Table'

The interface list.

wdmVc4Entry row .1.3.6.1.4.1.8708.2.4.2.6.1.1

An entry in the interface list.

Indexes

wdmVc4Index

Column Syntax OID

wdmVc4Index

An arbitrary index assigned to each if entry.

Unsigned32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.8708.2.4.2.6.1.1.1

wdmVc4Name

The management name of the vc4/vc3/STS-1,
e.g. vc4:1:2:1-2:8 where the first number
indicates sub-rack, the second slot number and
the third/forth are the port numbers. The last
number is the vc4/vc3/STS-1 id within the…

LUM-TCMgmtNameString

Type Constraints:
range: 0..255

Description:

An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.

.1.3.6.1.4.1.8708.2.4.2.6.1.1.2

wdmVc4Descr

User configurable label.

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.8708.2.4.2.6.1.1.3

wdmVc4Subrack

The number of the subrack where the vc4/vc3/STS-1 is
located.

LUM-TCSubrackNumber

Type Constraints:
range: 0..15

Description:

The number of a subrack within a network element.

0 signifies an undefined subrack number.

.1.3.6.1.4.1.8708.2.4.2.6.1.1.4

wdmVc4Slot

The number of the slot where the vc4/vc3/STS-1 is
located.

LUM-TCSlotNumber

Type Constraints:
range: 0..22

Description:

The number of a slot within a subrack.

0 signifies an undefined slot number.

.1.3.6.1.4.1.8708.2.4.2.6.1.1.5

wdmVc4TxPort

The number of the port where the TX-side of the
vc4/vc3/STS-1 is located.

LUM-TCPortNumber

Type Constraints:
range: 0..116

Description:

The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.

.1.3.6.1.4.1.8708.2.4.2.6.1.1.6

wdmVc4RxPort

The number of the port where the RX-side of the
vc4/vc3/STS-1 is located.

LUM-TCPortNumber

Type Constraints:
range: 0..116

Description:

The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.

.1.3.6.1.4.1.8708.2.4.2.6.1.1.7

wdmVc4Vc4

The id of the vc4 within the STM64/STM16 frame. When
Sonet, the id of the STS3 within the OC192/OC48 frame.

Unsigned32

Constraints:
range: 1-64

.1.3.6.1.4.1.8708.2.4.2.6.1.1.8

wdmVc4ObjectProperty

Property mask.

LUM-TCObjectProperty

Type Constraints:
range: 0..4294967295

Description:

A bitmask of length 32 encoding certain properties
of an object.

.1.3.6.1.4.1.8708.2.4.2.6.1.1.9

wdmVc4AuAlarmIndicationSignal

Alarm indication signal (AIS).
Applicable for SDH/Sonet signal formats.

A: An 'all ones' SDH/Sonet signal is detected.

D: SDH/Sonet signal recovered.

Enumeration

Enumerated Values:

1	ok
2	alarm

.1.3.6.1.4.1.8708.2.4.2.6.1.1.10

wdmVc4AuLossOfPointer

Loss of pointer detected.
Applicable for SDH/Sonet signal formats.

A: A loss of pointer is detected.

D: SDH/Sonet signal recovered.

Enumeration

Enumerated Values:

1	ok
2	alarm

.1.3.6.1.4.1.8708.2.4.2.6.1.1.11

wdmVc4RxSignalStatus

The operational state for incoming (RX) signal
of the interface.

down - A fault that would lead to a protection
switch has occurred.

degraded - The signal quality is impaired.
…

Enumeration

Enumerated Values:

1	down
2	degraded
3	up

.1.3.6.1.4.1.8708.2.4.2.6.1.1.12

wdmVc4ConcatenationStatus

Describes if and how the VC4s are concatenated.
In case of sonet how the STS3s are concatenated.

on - Concatenation is used.

off - No concatenation is used.

can be vc3 (STS-1…

Enumeration

Enumerated Values:

1	on
2	off
3	vc3
4	vc4
5	vc4x4c
6	vc4x16c
7	vc4x64c
8	sts1
9	sts3c
10	sts12c
11	unknown

.1.3.6.1.4.1.8708.2.4.2.6.1.1.13

wdmVc4PayloadStatus

Describes if the VC4/STS3 contains payload.

equipped - VC4/STS3 contains payload.

unequipped - No payload in VC4/STS3.

Enumeration

Enumerated Values:

1	equipped
2	unequipped

.1.3.6.1.4.1.8708.2.4.2.6.1.1.14

wdmVc4ConnectionStatus

Shows the name of the client port and
possible subchannel/vc4 that it is connected to
or Unconnected if not connected.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.8708.2.4.2.6.1.1.15

wdmVc4ConnectedForeignIndex

Shows the index of the connected interface.
Or 0 if unconnected.

Unsigned32r/w

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.8708.2.4.2.6.1.1.16

wdmVc4AdminStatus

The administrative state for the vc4/vc3/STS-1.

down - The vc3/vc4/STS-1 should not be used. This
vc4/vc3 will not affect rxSignalStatus.

up - The vc4/vc3/STS-1 should be used. This
vc4/vc3…

Enumerationr/w

Enumerated Values:

1	down
2	up

.1.3.6.1.4.1.8708.2.4.2.6.1.1.17

wdmRemoteProtTable

table

.1.3.6.1.4.1.8708.2.4.2.7.1 · 1 row entry · 26 columns

Open in standard view

Uses the infinera variant from /opt/observium/mibs/infinera.

Command help

Walk wdmRemoteProtTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-WDM-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-WDM-MIB::wdmRemoteProtTable'

The protection group table.

wdmRemoteProtEntry row .1.3.6.1.4.1.8708.2.4.2.7.1.1

An entry in the protection group table.

Indexes

wdmRemoteProtIndex

Column Syntax OID

wdmRemoteProtIndex

An arbitrary index assigned to each entry.

Unsigned32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.8708.2.4.2.7.1.1.1

wdmRemoteProtName

The name of the object, for example
'rpg:1:2:1', where the numbers indicate the
subrack, slot and TX port number for the local
interface of the group.

The interface is either a client interface
or a line …

LUM-TCMgmtNameString

Type Constraints:
range: 0..255

Description:

An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.

.1.3.6.1.4.1.8708.2.4.2.7.1.1.2

wdmRemoteProtDescr

User configurable label.

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.8708.2.4.2.7.1.1.3

wdmRemoteProtLocalSubrack

The subrack number for this protected
interface.

LUM-TCSubrackNumberr/w

Type Constraints:
range: 0..15

Description:

The number of a subrack within a network element.

0 signifies an undefined subrack number.

.1.3.6.1.4.1.8708.2.4.2.7.1.1.4

wdmRemoteProtLocalSlot

The slot number for this protected
interface.

LUM-TCSlotNumberr/w

Type Constraints:
range: 0..22

Description:

The number of a slot within a subrack.

0 signifies an undefined slot number.

.1.3.6.1.4.1.8708.2.4.2.7.1.1.5

wdmRemoteProtLocalPort

The port number for the TX side of this
protected interface.

LUM-TCPortNumberr/w

Type Constraints:
range: 0..116

Description:

The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.

.1.3.6.1.4.1.8708.2.4.2.7.1.1.6

wdmRemoteProtCommSubrack

The subrack number of the communication link for
this protection group.

LUM-TCSubrackNumberr/w

Type Constraints:
range: 0..15

Description:

The number of a subrack within a network element.

0 signifies an undefined subrack number.

.1.3.6.1.4.1.8708.2.4.2.7.1.1.7

wdmRemoteProtCommSlot

The slot number of the communication link for
this protection group.

LUM-TCSlotNumberr/w

Type Constraints:
range: 0..22

Description:

The number of a slot within a subrack.

0 signifies an undefined slot number.

.1.3.6.1.4.1.8708.2.4.2.7.1.1.8

wdmRemoteProtCommPort

The port number of the communication link for
this protection group

LUM-TCPortNumberr/w

Type Constraints:
range: 0..116

Description:

The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.

.1.3.6.1.4.1.8708.2.4.2.7.1.1.9

wdmRemoteProtCommInterface

The port number of the communication link for
this protection group

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.8708.2.4.2.7.1.1.10

wdmRemoteProtLastChangeTime

The time the operational state of the protection
group was last changed.

SNMPv2-TCDateAndTime

Type Constraints:
range: 8
range: 11

Description:

A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …

.1.3.6.1.4.1.8708.2.4.2.7.1.1.11

wdmRemoteProtIpAddress

The IP-address of the remote node.

SNMPv2-SMIIpAddressr/w

Type Constraints:
range: 4

.1.3.6.1.4.1.8708.2.4.2.7.1.1.12

wdmRemoteProtIdentifier

The identifier (name) of the protection group
that is understod by both the local and the remote
node.

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.8708.2.4.2.7.1.1.13

wdmRemoteProtRole

The role of the node in this protection group.

master - the manager should read info from this node.

slave - the manager should read from the other node

Enumerationr/w

Enumerated Values:

0	undefined
1	master
2	slave

.1.3.6.1.4.1.8708.2.4.2.7.1.1.14

wdmRemoteProtAdminStatus

The administrative state for the protection
group.

down - The protection group is inactive.

localForced - The local side is forced active.

remoteForced - The remote side is f…

Enumerationr/w

Enumerated Values:

1	down
2	localForced
3	remoteForced
4	auto
5	toggle

.1.3.6.1.4.1.8708.2.4.2.7.1.1.15

wdmRemoteProtRowStatus

Manages creation and deletion of conceptual rows.
See also SNMPv2-TC.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.8708.2.4.2.7.1.1.16

wdmRemoteProtActiveSide

The operational state for the protection group.

none - no side is active.

local - the local side is active.

remote - the remote side is active.

Enumeration

Enumerated Values:

1	none
2	local
3	remote

.1.3.6.1.4.1.8708.2.4.2.7.1.1.17

wdmRemoteProtLocalStatus

The operational state for the local side of the
protection group.

down - this side is out of service.

up - this side is working.

Enumeration

Enumerated Values:

0	unknown
1	down
2	up

.1.3.6.1.4.1.8708.2.4.2.7.1.1.18

wdmRemoteProtRemoteStatus

The operational state for the remote side of
the protection group.

down - this side is out of service.

up - this side is working.

Enumeration

Enumerated Values:

0	unknown
1	down
2	up

.1.3.6.1.4.1.8708.2.4.2.7.1.1.19

wdmRemoteProtObjectProperty

Property mask.

LUM-TCObjectProperty

Type Constraints:
range: 0..4294967295

Description:

A bitmask of length 32 encoding certain properties
of an object.

.1.3.6.1.4.1.8708.2.4.2.7.1.1.20

wdmRemoteProtServiceDegraded

Protection service degraded.

A: One of the sides of the protection group has
signal failure or one side is forced active.

D: Both sides of the protection group are
available (The signal is …

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.4.2.7.1.1.21

wdmRemoteProtServiceFailure

Protection service failure.

A: Both sides of the protection group has
signal failure or the side that is forced
active has signal failure.

D: One of the sides of the protection group
is ava…

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.4.2.7.1.1.22

wdmRemoteProtSetup

Procedure to setup the protection group.

- Communication Interface
Select from a list of available interfaces

- Remote IP-address
Select from a list of discovered addresses or
enter a…

LUM-TCCommandString

Description:

tbd

.1.3.6.1.4.1.8708.2.4.2.7.1.1.23

wdmRemoteProtSetupFailure

Protection group setup failure.

A: The defined remote IP-address and/or protection
group identifier can not be resolved with the
peer node.

D: The protection group can be resolved

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.4.2.7.1.1.24

wdmRemoteProtRoleConflict

Protection group master/slave conflict.

A: The protection group is resolved, but the two
peers have the same role defined - both master,
or both slave

D: Their respective roles differ

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.4.2.7.1.1.25

wdmRemoteProtCommunicationFailure

Protection group communication failure

A: There are several underlying criterias for this:
- Loss of signal on the communication link
- Errors on the communication link
- Supervision failures
…

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.4.2.7.1.1.26

wdmCtrlChannelTable

table deprecated

.1.3.6.1.4.1.8708.2.4.2.8.1 · 1 row entry · 28 columns

Open in standard view

Uses the infinera variant from /opt/observium/mibs/infinera.

Command help

Walk wdmCtrlChannelTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-WDM-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-WDM-MIB::wdmCtrlChannelTable'

The interface list.

wdmCtrlChannelEntry row .1.3.6.1.4.1.8708.2.4.2.8.1.1

An entry in the interface list.

Indexes

wdmCtrlChannelIndex

Column Syntax OID

wdmCtrlChannelIndexdeprecated

An index assigned to each entry. The index contains information
about subrack, slot and port for controlled channel.

Unsigned32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.8708.2.4.2.8.1.1.1

wdmCtrlChannelNamedeprecated

The management name of the channel, for example
'ch:1:2:1:959'
(ch:[subrack]:[slot]:[port]:[channel]).

LUM-TCMgmtNameString

Type Constraints:
range: 0..255

Description:

An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.

.1.3.6.1.4.1.8708.2.4.2.8.1.1.2

wdmCtrlChannelSubrackdeprecated

The subrack number of the unit where the controlled
channel is attenuated.

LUM-TCSubrackNumberr/w

Type Constraints:
range: 0..15

Description:

The number of a subrack within a network element.

0 signifies an undefined subrack number.

.1.3.6.1.4.1.8708.2.4.2.8.1.1.3

wdmCtrlChannelSlotdeprecated

The slot number of the unit where the controlled
channel is attenuated.

LUM-TCSlotNumberr/w

Type Constraints:
range: 0..22

Description:

The number of a slot within a subrack.

0 signifies an undefined slot number.

.1.3.6.1.4.1.8708.2.4.2.8.1.1.4

wdmCtrlChannelTxPortdeprecated

The port number of the controlled channel in the unit where
the channel is attenuated.

LUM-TCPortNumber

Type Constraints:
range: 0..116

Description:

The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.

.1.3.6.1.4.1.8708.2.4.2.8.1.1.5

wdmCtrlChannelChanneldeprecated

The frequency of the 'wavelength' given in
hundreds of GHz (0.01 GHz).

LUM-TCLambdaFrequencyr/w

Type Values:

0	undefined
1	iWdmPonFrequency
2	otclg
130	b1300
150	b1500
850	w850
1270	w1270
1290	w1290
1310	w1310
1330	w1330
1350	w1350
1370	w1370
1390	w1390
1410	w1410
1430	w1430
1450	w1450
1470	w1470
1490	w1490
1510	w1510
1530	w1530
1550	w1550
1570	w1570
1590	w1590
1610	w1610
1611	w1611
18710	ch871
18730	ch873
18750	ch875
18770	ch877
18790	ch879
18810	ch881
18830	ch883
18850	ch885
18870	ch887
18890	ch889
18910	ch891
18930	ch893
18950	ch895
18970	ch897
18990	ch899
19010	ch901
19030	ch903
19050	ch905
19070	ch907
19090	ch909
19135	ch9135
19140	ch914
19145	ch9145
19150	ch915
19155	ch9155
19160	ch916
19165	ch9165
19170	ch917
19175	ch9175
19180	ch918
19185	ch9185
19190	ch919
19195	ch9195
19200	ch920
19205	ch9205
19210	ch921
19215	ch9215
19220	ch922
19225	ch9225
19230	ch923
19235	ch9235
19240	ch924
19245	ch9245
19250	ch925
19255	ch9255
19260	ch926
19265	ch9265
19270	ch927
19275	ch9275
19280	ch928
19285	ch9285
19290	ch929
19295	ch9295
19300	ch930
19305	ch9305
19310	ch931
19315	ch9315
19320	ch932
19325	ch9325
19330	ch933
19335	ch9335
19340	ch934
19345	ch9345
19350	ch935
19355	ch9355
19360	ch936
19365	ch9365
19370	ch937
19375	ch9375
19380	ch938
19385	ch9385
19390	ch939
19395	ch9395
19400	ch940
19405	ch9405
19410	ch941
19415	ch9415
19420	ch942
19425	ch9425
19430	ch943
19435	ch9435
19440	ch944
19445	ch9445
19450	ch945
19455	ch9455
19460	ch946
19465	ch9465
19470	ch947
19475	ch9475
19480	ch948
19485	ch9485
19490	ch949
19495	ch9495
19500	ch950
19505	ch9505
19510	ch951
19515	ch9515
19520	ch952
19525	ch9525
19530	ch953
19535	ch9535
19540	ch954
19545	ch9545
19550	ch955
19555	ch9555
19560	ch956
19565	ch9565
19570	ch957
19575	ch9575
19580	ch958
19585	ch9585
19590	ch959
19595	ch9595
19600	ch960
19605	ch9605
19610	ch961

Description:

The frequency of the 'wavelength' given in hundreds
of GHz (0.01 GHz).

.1.3.6.1.4.1.8708.2.4.2.8.1.1.6

wdmCtrlChannelGroupNumberdeprecated

The number of the group to which the controlled
channel belongs.

Unsigned32r/w

Constraints:
range: 1-64

.1.3.6.1.4.1.8708.2.4.2.8.1.1.7

wdmCtrlChannelAdminStatusdeprecated

The administrative state for the channel control.

down - The channel control is inactive. Channel
attenuation is set to its maximum value.

service - The channel control is activated but
ala…

LUM-TCBoardOrInterfaceAdminStatusr/w

Type Values:

1	down
2	service
3	up

Description:

.1.3.6.1.4.1.8708.2.4.2.8.1.1.8

wdmCtrlChannelWantedOutputPowerdeprecated

The wanted output power.

Integer32r/w

Constraints:
range: -260-120

.1.3.6.1.4.1.8708.2.4.2.8.1.1.9

wdmCtrlChannelCurrentOutputPowerdeprecated

The actual output power.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.8708.2.4.2.8.1.1.10

wdmCtrlChannelCurrentAttenuationdeprecated

The current attenuation.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.8708.2.4.2.8.1.1.11

wdmCtrlChannelForceRegulationCommanddeprecated

Starts a regulation manually

LUM-TCCommandString

Description:

tbd

.1.3.6.1.4.1.8708.2.4.2.8.1.1.12

wdmCtrlChannelOuputPowerControlFailuredeprecated

Alarm raised when the wanted output power
can not be obtained. That is

a) The wanted power has not been obtained after the
maximum number of consequent control cycles.

b) Failure to read th…

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.4.2.8.1.1.13

wdmCtrlChannelCurrentPowerOutOfRangedeprecated

Alarm raised when the current output power
is outside the 'regulation range' for the group.

At this point, no regulation will be performed on
the channel. The operator must change the
wantedOutputPower or…

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.4.2.8.1.1.14

wdmCtrlChannelAttenuationOutOfRangedeprecated

Alarm raised when the attenuation is at the maximum
or minimum values for the controlled device and the
wantedOutputPower cannot be obtained.

At this point, no regulation will be performed on
the channel.

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.4.2.8.1.1.15

wdmCtrlChannelStatusdeprecated

The regulation status of the channel.

initial - No regulation has been performed yet.

searching - The system is trying to detect the channel.

regulating - The system is r…

Enumeration

Enumerated Values:

1	initial
2	searching
3	regulating
4	ok
5	notFound
6	error
7	waiting

.1.3.6.1.4.1.8708.2.4.2.8.1.1.16

wdmCtrlChannelStartupChanneldeprecated

Initiates a safe startup procedure for the channel
when set to 'start'.

If the administrative status of the channel is
'down' or the channel is not detected by the monitor
unit, the system attempts to det…

Enumerationr/w

Enumerated Values:

1	normal
2	start
3	blocked

.1.3.6.1.4.1.8708.2.4.2.8.1.1.17

wdmCtrlChannelMonitorIndexdeprecated

Shows the index of the connected monitor interface.

Unsigned32

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.8708.2.4.2.8.1.1.18

wdmCtrlChannelStartupCommanddeprecated

Initiates a safe startup sequence for the
channel. If the administrative status of the channel
is 'down' or the channel is not detected by the
monitor unit, the system attempts to detect the
channel as follows:
…

LUM-TCCommandString

Description:

tbd

.1.3.6.1.4.1.8708.2.4.2.8.1.1.19

wdmCtrlChannelSfpMissingdeprecated

An expected SFP is missing.

A(ctivation): An expected SFP is missing.

D(e-activation): The missing SFP is inserted.

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.4.2.8.1.1.20

wdmCtrlChannelSfpMediaMismatchdeprecated

The type of the SFP used for the channel port
is not the expected.

A(ctivation): Invalid or mismatching SFP media is
detected.

D(e-activation): The correct SFP is used.

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.4.2.8.1.1.21

wdmCtrlChannelLossOfSignaldeprecated

Loss of signal at the channel port.

A(ctivation): Active loss of signal HW
indication.

D(e-activation): Inactive loss of signal HW
indication.

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.4.2.8.1.1.22

wdmCtrlChannelDescrdeprecated

User configurable label.

This attribute can be written via SNMP.

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.8708.2.4.2.8.1.1.23

wdmCtrlChannelMaxAttenuationdeprecated

The max attenuation limit on channel.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.8708.2.4.2.8.1.1.24

wdmCtrlChannelMinAttenuationdeprecated

The min attenuation limit on channel.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.8708.2.4.2.8.1.1.25

wdmCtrlChannelAttenControlOffsetdeprecated

The threshold offset to max/min attenuation on the channel.
If the threshold is reached, AttenControlDegraded alarm will be raised.

Unsigned32r/w

Constraints:
range: 0-1000

.1.3.6.1.4.1.8708.2.4.2.8.1.1.26

wdmCtrlChannelAttenControlDegradeddeprecated

Alarm is raised when channel attenuation
is crossing threshold to max/min attenuation.

A(ctivation): Active the alarm indication.

D(e-activation): Inactive the alarm indication.

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.4.2.8.1.1.27

wdmCtrlChannelNotFounddeprecated

Channel not found.

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.4.2.8.1.1.28

wdmCtrlGroupTable

table deprecated

.1.3.6.1.4.1.8708.2.4.2.9.1 · 1 row entry · 23 columns

Open in standard view

Uses the infinera variant from /opt/observium/mibs/infinera.

Command help

Walk wdmCtrlGroupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-WDM-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-WDM-MIB::wdmCtrlGroupTable'

The interface list.

wdmCtrlGroupEntry row .1.3.6.1.4.1.8708.2.4.2.9.1.1

An entry in the interface list.

Indexes

wdmCtrlGroupIndex

Column Syntax OID

wdmCtrlGroupIndexdeprecated

An index assigned to each entry. Index contains
information about group number, subrack, slot and
port.

Unsigned32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.8708.2.4.2.9.1.1.1

wdmCtrlGroupNamedeprecated

The management name of the group,
for example 'group:1' (group:[groupNumber]).

LUM-TCMgmtNameString

Type Constraints:
range: 0..255

Description:

An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.

.1.3.6.1.4.1.8708.2.4.2.9.1.1.2

wdmCtrlGroupDescrdeprecated

User configurable label.

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.8708.2.4.2.9.1.1.3

wdmCtrlGroupGroupNumberdeprecated

A unique number identifying the group.

Unsigned32r/w

Constraints:
range: 1-64

.1.3.6.1.4.1.8708.2.4.2.9.1.1.4

wdmCtrlGroupSubrackdeprecated

The number of the subrack where the monitor unit is
located.

LUM-TCSubrackNumberr/w

Type Constraints:
range: 0..15

Description:

The number of a subrack within a network element.

0 signifies an undefined subrack number.

.1.3.6.1.4.1.8708.2.4.2.9.1.1.5

wdmCtrlGroupSlotdeprecated

The number of the slot where the monitor is located.

LUM-TCSlotNumberr/w

Type Constraints:
range: 0..22

Description:

The number of a slot within a subrack.

0 signifies an undefined slot number.

.1.3.6.1.4.1.8708.2.4.2.9.1.1.6

wdmCtrlGroupPortdeprecated

The monitor port where the group is connected.
Each character represents a port number, as shown:
a->1, b->2, c->3, d->4, e->5, f->6, g->7, h->8.

Enumerationr/w

Enumerated Values:

1	a
2	b
3	c
4	d
5	e
6	f
7	g
8	h

.1.3.6.1.4.1.8708.2.4.2.9.1.1.7

wdmCtrlGroupMonitorNamedeprecated

The management name of the monitor port,
for example 'ocm:1:2:1-A'
([monitortype]:[subrack]:[slot]:[port]).

LUM-TCMgmtNameString

Type Constraints:
range: 0..255

Description:

An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.

.1.3.6.1.4.1.8708.2.4.2.9.1.1.8

wdmCtrlGroupAdminStatusdeprecated

The administrative state for the group.

down - The group is de-activated. No regulations
will be performed.

service - The group is activated but alarms
are suppressed. Intended for use duri…

LUM-TCBoardOrInterfaceAdminStatusr/w

Type Values:

1	down
2	service
3	up

Description:

.1.3.6.1.4.1.8708.2.4.2.9.1.1.9

wdmCtrlGroupControlModedeprecated

The current control group mode.

normal - regulation is performed at the interval
defined in General -> Regulation interval

commissioning - the regulation is performed
continuously. After 1…

Enumeration

Enumerated Values:

1	normal
2	commissioning

.1.3.6.1.4.1.8708.2.4.2.9.1.1.10

wdmCtrlGroupConfigurationCommanddeprecated

Select which control mode to use:

normal - regulation is performed at the interval
defined in General -> Regulation interval

commissioning - the regulation is performed
continuously. After…

LUM-TCCommandString

Description:

tbd

.1.3.6.1.4.1.8708.2.4.2.9.1.1.11

wdmCtrlGroupForceRegulationCommanddeprecated

Starts a regulation manually

LUM-TCCommandString

Description:

tbd

.1.3.6.1.4.1.8708.2.4.2.9.1.1.12

wdmCtrlGroupLockedRangedeprecated

To avoid frequent changes of attenuation, a range
can be defined around the wanted output power. A
control loop will not try to adjust power values
within the range.

Integer32r/w

Constraints:
range: 1-30

.1.3.6.1.4.1.8708.2.4.2.9.1.1.13

wdmCtrlGroupRegulationRangedeprecated

An offset below the wanted output power
at which the 'Current Power Out Of Range'
alarm shall be raised.

When the current output power is so
far below the wanted output power,
the regulation stops and the…

Unsigned32r/w

Constraints:
range: 0-1000

.1.3.6.1.4.1.8708.2.4.2.9.1.1.14

wdmCtrlGroupRegulationLastChangeTimedeprecated

The time when the group was last regulated.

SNMPv2-TCDateAndTime

Type Constraints:
range: 8
range: 11

Description:

A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …

.1.3.6.1.4.1.8708.2.4.2.9.1.1.15

wdmCtrlGroupCommissioningModedeprecated

Alarm raised when the group is put in commissioning
mode.

A: Commissioning mode is used

D: Normal mode

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.4.2.9.1.1.16

wdmCtrlGroupAssociateChanneldeprecated

Creates one or several control channel objects and
associates them to the selected group.

User needs to specify:

- The board where the added channels are attenuated.
- The port(s) or channe…

LUM-TCCommandString

Description:

tbd

.1.3.6.1.4.1.8708.2.4.2.9.1.1.17

wdmCtrlGroupNoOfChannelsdeprecated

The current number of channels associated with this
group.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.8708.2.4.2.9.1.1.18

wdmCtrlGroupStatusdeprecated

The regulation status for the group

starting - the system is starting up

noRegulation - the group contains no channels to
regulate

reading - the control loop i…

Enumeration

Enumerated Values:

1	starting
2	noRegulation
3	reading
4	regulation
5	idle

.1.3.6.1.4.1.8708.2.4.2.9.1.1.19

wdmCtrlGroupTimeLeftdeprecated

The remaining time (in seconds) to next regulation.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.8708.2.4.2.9.1.1.20

wdmCtrlGroupOutputPowerMismatchdeprecated

The total output power of the OCM differs by
more than 1.4dB from the monitor port
insertion loss value of the OA.

A: The total output power of the OCM differs from
the monitor port insertion loss by more…

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.4.2.9.1.1.21

wdmCtrlGroupTotalPowerdeprecated

Total power of channels associated to
this group, based on OCM measurements.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.8708.2.4.2.9.1.1.22

wdmCtrlGroupChannelStartupCommanddeprecated

Initiates a safe startup sequence for all the
channels of selected group. If the administrative
status of the channel is 'down' or the channel is
not detected by the monitor unit, the system attempts
to detect the chann…

LUM-TCCommandString

Description:

tbd

.1.3.6.1.4.1.8708.2.4.2.9.1.1.23

wdmSubChannelTable

table

.1.3.6.1.4.1.8708.2.4.2.10.1 · 1 row entry · 11 columns

Open in standard view

Uses the infinera variant from /opt/observium/mibs/infinera.

Command help

Walk wdmSubChannelTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-WDM-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-WDM-MIB::wdmSubChannelTable'

The interface list.

wdmSubChannelEntry row .1.3.6.1.4.1.8708.2.4.2.10.1.1

An entry in the interface list.

Indexes

wdmSubChannelIndex

Column Syntax OID

wdmSubChannelIndex

An index assigned to each entry. The index contains
information about subrack, slot and port for
controlled channel.

Unsigned32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.8708.2.4.2.10.1.1.1

wdmSubChannelName

The management name of the interface, for example
'channel:1:2:1-2:19'
(channel:[subrack]:[slot]:[port]:[channel]).

LUM-TCMgmtNameString

Type Constraints:
range: 0..255

Description:

An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.

.1.3.6.1.4.1.8708.2.4.2.10.1.1.2

wdmSubChannelId

The channelId within the line signal.

Unsigned32

Constraints:
range: 1-30

.1.3.6.1.4.1.8708.2.4.2.10.1.1.3

wdmSubChannelType

Shows what format(s) this channel is used for.
(e1t1, fe or gbeFe)

Enumeration

Enumerated Values:

1	e1t1
2	fe
3	gbeFe

.1.3.6.1.4.1.8708.2.4.2.10.1.1.4

wdmSubChannelUnequipped

Shows whether the remote node has
inserted payload into this channel.

A: No payload is received on this channel

D: Payload is received again

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.4.2.10.1.1.5

wdmSubChannelConnectionStatus

Shows the name of the client port and
possible subchannel that it is connected to
or Unconnected if not connected.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.8708.2.4.2.10.1.1.6

wdmSubChannelConnectedForeignIndex

Shows the index of the connected interface.
Or 0 if unconnected.

Unsigned32r/w

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.8708.2.4.2.10.1.1.7

wdmSubChannelCrossConnect

Connect a subchannel to a specific client and
subchannel

LUM-TCCommandString

Description:

tbd

.1.3.6.1.4.1.8708.2.4.2.10.1.1.8

wdmSubChannelDisconnect

Disconnect existing crossConnections

LUM-TCCommandString

Description:

tbd

.1.3.6.1.4.1.8708.2.4.2.10.1.1.9

wdmSubChannelRemoteAccessInterface

Shows the name of the client port in the remote
access node that terminated the sub channel.

For sub channels that are not terminated in the
remote node, 'Not Terminated' is shown.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.8708.2.4.2.10.1.1.10

wdmSubChannelProtectedChannelIndex

Shows the index of the protected chanel.
Or 0 if not active protection.
updates when protection state is changed.

Unsigned32r/w

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.8708.2.4.2.10.1.1.11

wdmDelayCompPGTable

table

.1.3.6.1.4.1.8708.2.4.2.12.1 · 1 row entry · 11 columns

Open in standard view

Uses the infinera variant from /opt/observium/mibs/infinera.

Command help

Walk wdmDelayCompPGTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-WDM-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-WDM-MIB::wdmDelayCompPGTable'

Delay compensation for protection groups table.

wdmDelayCompPGEntry row .1.3.6.1.4.1.8708.2.4.2.12.1.1

An entry in the table.

Indexes

wdmDelayCompPGIndex

Column Syntax OID

wdmDelayCompPGIndex

An index assigned to each entry. The index contains
information about subrack, slot and port for
controlled channel.

Unsigned32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.8708.2.4.2.12.1.1.1

wdmDelayCompPGName

The management name of the entry, for example
'dcpg:1:3:17-18:1:3:19-20'
(dcpg:[subrack]:[slot]:[leftporttx]-[leftportrx]:[subrack]:[slot]:[rightporttx]-[rightportrx]).

LUM-TCMgmtNameString

Type Constraints:
range: 0..255

Description:

An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.

.1.3.6.1.4.1.8708.2.4.2.12.1.1.2

wdmDelayCompPGUpId

The UpId within the table.

Unsigned32

Constraints:
range: 1-30

.1.3.6.1.4.1.8708.2.4.2.12.1.1.3

wdmDelayCompPGAdminStatus

The administrative state for the object.

service - The object is activated but alarms
are suppressed. Intended for use during service
or re-configuration. When service is concluded
adminStatus should be s…

LUM-TCAdminStatusWithNAr/w

Type Values:

1	down
2	service
3	up
2147483647	notApplicable

Description:

The administrative state for an interface.

down - The interface should be inactive.

service - The board/interface is activated but
alarms are suppressed. Intended for use during
service or re-confi…

.1.3.6.1.4.1.8708.2.4.2.12.1.1.4

wdmDelayCompPGOperStatus

The operational state for the object.

notPresent - The object is not available.

down - The object is de-activated or there are
faults preventing its transition to the 'up' state.
…

LUM-TCOperStatusWithNA

Type Values:

1	notPresent
2	down
3	up
2147483647	notApplicable

Description:

The operational state for a interface.

notPresent - The interface is not available.

down - The interface is de-activated or
there are faults preventing it from going to the
'up'-state.

u…

.1.3.6.1.4.1.8708.2.4.2.12.1.1.5

wdmDelayCompPGAutoCompensationMode

The automatic delay compensation mode.

LUM-TCEnabledDisabledWithNAr/w

Type Values:

1	disabled
2	enabled
2147483647	notApplicable

Description:

disabled - Attribute is not set.

enabled - Attribute is set.

notApplicable (2147483647) is used when attribute is
not used in current configuration.

.1.3.6.1.4.1.8708.2.4.2.12.1.1.6

wdmDelayCompPGAutoCompensationState

The automatic delay compensation state.

Enumeration

Enumerated Values:

1	state1
2	state2
2147483647	notApplicable

.1.3.6.1.4.1.8708.2.4.2.12.1.1.7

wdmDelayCompPGDelayDifference

The current delay difference in nanoseconds, after compensation.
The difference is calculated as (right line current delay) - (left line current delay).

LUM-TCSigned32WithNA

Type Constraints:
range: -2147483648..2147483647

Description:

A signed integer.

2147483646 used to tell that it is not
possible to read attribute at the moment.

2147483647 is used to indicate that the attri-
bute is not available currently

.1.3.6.1.4.1.8708.2.4.2.12.1.1.8

wdmDelayCompPGDelayCompensationOOR

Delay compensation out-of-range.

alarm: The delay compensation is out-of-range.

ok: The delay compensation is in range.

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.4.2.12.1.1.9

wdmDelayCompPGFiberLengthDifferenceOOR

Fiber length difference out-of-range.

alarm: The fiber length difference is out-of-range.

ok: The fiber length difference is in range.

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.4.2.12.1.1.10

wdmDelayCompPGDelayCompensationReset

Resets the automatic delay compensation.
After a successful reset the default value
(normal) is restored in this attribute.

LUM-TCResetWithNA

Type Values:

1	reset
2	normal
2147483647	notApplicable

Description:

When the attribute is set to reset the function is
re-initialised. Then the attribute is set to normal again
automatically.
reset - Re-initialises the function
normal - The function is in normal state
notApplicable - us…

.1.3.6.1.4.1.8708.2.4.2.12.1.1.11

wdmDelayCompLinkTable

table

.1.3.6.1.4.1.8708.2.4.2.13.1 · 1 row entry · 5 columns

Open in standard view

Uses the infinera variant from /opt/observium/mibs/infinera.

Command help

Walk wdmDelayCompLinkTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-WDM-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-WDM-MIB::wdmDelayCompLinkTable'

Delay compensation for protection group links table.

wdmDelayCompLinkEntry row .1.3.6.1.4.1.8708.2.4.2.13.1.1

An entry in the table.

Indexes

wdmDelayCompLinkIndex

Column	Syntax	OID
wdmDelayCompLinkIndex An index assigned to each entry. The index contains information about subrack, slot and port for controlled channel.	Unsigned32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.8708.2.4.2.13.1.1.1`
wdmDelayCompLinkName The management name of the entry, for example 'dclink:1:3:17-18' (dclink:[subrack]:[slot]:[porttx]-[portrx]).	LUM-TCMgmtNameString Type Constraints: `range: 0..255` Description: An octet string containing administrative information, in human-readable form. More or less the same as SnmpAdminString defined in SNMP-FRAMEWORK-MIB.	`.1.3.6.1.4.1.8708.2.4.2.13.1.1.2`
wdmDelayCompLinkUpId The UpId within the table.	Unsigned32 Constraints: `range: 1-30`	`.1.3.6.1.4.1.8708.2.4.2.13.1.1.3`
wdmDelayCompLinkCurrentDelayCompensation The current delay compensation in nanoseconds. Note, the granularity of this value is determined by the hardware capabilities.	LUM-TCSigned32WithNA Constraints: `range: 0-47233` Description: A signed integer. 2147483646 used to tell that it is not possible to read attribute at the moment. 2147483647 is used to indicate that the attri- bute is not available currently	`.1.3.6.1.4.1.8708.2.4.2.13.1.1.4`
wdmDelayCompLinkWantedDelayCompensation The wanted delay compensation in nanoseconds. Note, this value is only used by the system when automatic delay compensation mode is disabled.	LUM-TCSigned32WithNAr/w Constraints: `range: 0-47233` Description: A signed integer. 2147483646 used to tell that it is not possible to read attribute at the moment. 2147483647 is used to indicate that the attri- bute is not available currently	`.1.3.6.1.4.1.8708.2.4.2.13.1.1.5`

wdmMeanChannelPowerControlGlobalTable

table

.1.3.6.1.4.1.8708.2.4.2.14.1 · 1 row entry · 3 columns

Open in standard view

Uses the infinera variant from /opt/observium/mibs/infinera.

Command help

Walk wdmMeanChannelPowerControlGlobalTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-WDM-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-WDM-MIB::wdmMeanChannelPowerControlGlobalTable'

Bogus table to hold one entry with a dialog attribute to create
entries in another table.

wdmMeanChannelPowerControlGlobalEntry row .1.3.6.1.4.1.8708.2.4.2.14.1.1

A list of links where the channel power will be adjusted

Indexes

wdmMeanChannelPowerControlGlobalIndex

Column	Syntax	OID
wdmMeanChannelPowerControlGlobalIndex An index assigned to each entry. The index contains information about subrack, slot and port for controlled channel.	Unsigned32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.8708.2.4.2.14.1.1.1`
wdmMeanChannelPowerControlGlobalName The management name of this bogus entry, that only exists to create other entries. 'bogus'	LUM-TCMgmtNameString Type Constraints: `range: 0..255` Description: An octet string containing administrative information, in human-readable form. More or less the same as SnmpAdminString defined in SNMP-FRAMEWORK-MIB.	`.1.3.6.1.4.1.8708.2.4.2.14.1.1.2`
wdmMeanChannelPowerControlGlobalEntryCreate Creates a wdmMeanChannelPowerControl entry in another table	LUM-TCCommandString Description: tbd	`.1.3.6.1.4.1.8708.2.4.2.14.1.1.3`

wdmMeanChannelPowerControlTable

table

.1.3.6.1.4.1.8708.2.4.2.15.1 · 1 row entry · 35 columns

Open in standard view

Uses the infinera variant from /opt/observium/mibs/infinera.

Command help

Walk wdmMeanChannelPowerControlTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-WDM-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-WDM-MIB::wdmMeanChannelPowerControlTable'

The list of local links to balance channel power on

wdmMeanChannelPowerControlEntry row .1.3.6.1.4.1.8708.2.4.2.15.1.1

A list of links where the channel power will be adjusted

Indexes

wdmMeanChannelPowerControlIndex

Column Syntax OID

wdmMeanChannelPowerControlIndex

An index assigned to each entry. The index contains information
about subrack, slot and port for controlled channel.

Unsigned32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.8708.2.4.2.15.1.1.1

wdmMeanChannelPowerControlName

The management name of the local link adjustment
entry 'meanChannelPowerControl:1:2:1'
(meanChannelPowerControl[oa subrack]:[oa slot]:[oa port]).

LUM-TCMgmtNameString

Type Constraints:
range: 0..255

Description:

An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.

.1.3.6.1.4.1.8708.2.4.2.15.1.1.2

wdmMeanChannelPowerControlDescr

User configurable label.

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.8708.2.4.2.15.1.1.3

wdmMeanChannelPowerControlOcmSubrack

The subrack number of the ocm reading the oa
monitor port.

LUM-TCSubrackNumberr/w

Type Constraints:
range: 0..15

Description:

The number of a subrack within a network element.

0 signifies an undefined subrack number.

.1.3.6.1.4.1.8708.2.4.2.15.1.1.4

wdmMeanChannelPowerControlOcmSlot

The slot number of the ocm reading the oa
monitor port.
channel is attenuated.

LUM-TCSlotNumberr/w

Type Constraints:
range: 0..22

Description:

The number of a slot within a subrack.

0 signifies an undefined slot number.

.1.3.6.1.4.1.8708.2.4.2.15.1.1.5

wdmMeanChannelPowerControlOcmPort

The monitor port of this local link
adjustment loop.

Enumerationr/w

Enumerated Values:

1	a
2	b
3	c
4	d
5	e
6	f
7	g
8	h

.1.3.6.1.4.1.8708.2.4.2.15.1.1.6

wdmMeanChannelPowerControlOaSubrack

The subrack number of the oa that is being
controlled by this local link adjustment
entry

LUM-TCSubrackNumber

Type Constraints:
range: 0..15

Description:

The number of a subrack within a network element.

0 signifies an undefined subrack number.

.1.3.6.1.4.1.8708.2.4.2.15.1.1.7

wdmMeanChannelPowerControlOaSlot

The slot number of the oa that is being
controlled by this local link adjustment
entry

LUM-TCSlotNumber

Type Constraints:
range: 0..22

Description:

The number of a slot within a subrack.

0 signifies an undefined slot number.

.1.3.6.1.4.1.8708.2.4.2.15.1.1.8

wdmMeanChannelPowerControlOaPort

The port number of the oa that is being
controlled by this local link adjustment
entry

LUM-TCPortNumber

Type Constraints:
range: 0..116

Description:

The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.

.1.3.6.1.4.1.8708.2.4.2.15.1.1.9

wdmMeanChannelPowerControlMonitorName

The management name of the monitor port,
for example 'ocm:1:2:1-A'
([monitortype]:[subrack]:[slot]:[port]).

LUM-TCMgmtNameString

Type Constraints:
range: 0..255

Description:

An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.

.1.3.6.1.4.1.8708.2.4.2.15.1.1.10

wdmMeanChannelPowerControlAdminStatus

The administrative state for the local link
adjustment entry.

down - The link adjustment is disabled

service - The link is adjusting the channel
power but alarms are suppressed.
Intended fo…

LUM-TCAdminStatusWithNAr/w

Type Values:

1	down
2	service
3	up
2147483647	notApplicable

Description:

.1.3.6.1.4.1.8708.2.4.2.15.1.1.11

wdmMeanChannelPowerControlOperStatus

The operational state for the control group

down - The control group cannot operate due
to missing resources or other complications

up - The control group is active

LUM-TCBoardOrInterfaceOperStatus

Type Values:

1	notPresent
2	down
3	up

Description:

.1.3.6.1.4.1.8708.2.4.2.15.1.1.12

wdmMeanChannelPowerControlStartRegulation

Starts a regulation manually

LUM-TCCommandString

Description:

tbd

.1.3.6.1.4.1.8708.2.4.2.15.1.1.13

wdmMeanChannelPowerControlRegulationRange

Unsigned32r/w

Constraints:
range: 0-1000

.1.3.6.1.4.1.8708.2.4.2.15.1.1.14

wdmMeanChannelPowerControlLatestRegulation

The time when the link was last regulated.

SNMPv2-TCDateAndTime

Type Constraints:
range: 8
range: 11

Description:

A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …

.1.3.6.1.4.1.8708.2.4.2.15.1.1.15

wdmMeanChannelPowerControlLatestChange

The time when the link was latest adjusted

SNMPv2-TCDateAndTime

Type Constraints:
range: 8
range: 11

Description:

A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …

.1.3.6.1.4.1.8708.2.4.2.15.1.1.16

wdmMeanChannelPowerControlMonitorOffsetCalibrationFailed

Alarm raised when calibration of the OCM port fails.

A: calibration of OCM port failed

D: Normal mode

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.4.2.15.1.1.17

wdmMeanChannelPowerControlRegulationState

The regulation status for the link

starting - the local link adjustment loop is
reading the power from the
monitor

regulating - the local link adjustment loop
…

Enumeration

Enumerated Values:

1	starting
2	regulating
3	idle

.1.3.6.1.4.1.8708.2.4.2.15.1.1.18

wdmMeanChannelPowerControlTimeToNextRegulation

The remaining time (in minutes) to next regulation.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.8708.2.4.2.15.1.1.19

wdmMeanChannelPowerControlWantedChannelPower

The wanted output power.

Integer32r/w

Constraints:
range: -150-100

.1.3.6.1.4.1.8708.2.4.2.15.1.1.20

wdmMeanChannelPowerControlCurrentChannelPower

The actual output power.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.8708.2.4.2.15.1.1.21

wdmMeanChannelPowerControlCurrentGain

OA signal gain set by the local link
adjustment loop

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.8708.2.4.2.15.1.1.22

wdmMeanChannelPowerControlTotalChannelOutputPower

Total channel output power

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.8708.2.4.2.15.1.1.23

wdmMeanChannelPowerControlNumberOfChannels

Number of channels read from OCM

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.8708.2.4.2.15.1.1.24

wdmMeanChannelPowerControlAbsolutePowerOffset

Absolute power offset

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.8708.2.4.2.15.1.1.25

wdmMeanChannelPowerControlRemainingPowerOffset

Remaining power offset

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.8708.2.4.2.15.1.1.26

wdmMeanChannelPowerControlMonitorOffsetTooLarge

Alarm raised when the OCM monitor port offset is too large

A: OCM port offset too large

D: Normal mode

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.4.2.15.1.1.27

wdmMeanChannelPowerControlChannelPowerOutOfRange

Alarm raised when the incoming channelpower is
too high or too low to regulate to the wanted
mean channel power

A: channel power out of range

D: Normal mode

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.4.2.15.1.1.28

wdmMeanChannelPowerControlRegulationInterval

Minimum time between two regulations, a random
wait time of up to 15 seconds is added to this
value when calculating when the next regulation
should occurr.

Unsigned32r/w

Constraints:
range: 10-30

.1.3.6.1.4.1.8708.2.4.2.15.1.1.29

wdmMeanChannelPowerControlAmplifierOutputPort

The management name of the OA port controlled by
this control loop

LUM-TCMgmtNameString

Type Constraints:
range: 0..255

Description:

An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.

.1.3.6.1.4.1.8708.2.4.2.15.1.1.30

wdmMeanChannelPowerControlLatestAmplifierRxPower

The latest amplifier input power

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.8708.2.4.2.15.1.1.31

wdmMeanChannelPowerControlLatestAmplifierTxPower

The latest amplifier output power

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.8708.2.4.2.15.1.1.32

wdmMeanChannelPowerControlLocalId

Store the local ID since it will be needed when reading backup

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.8708.2.4.2.15.1.1.33

wdmMeanChannelPowerControlRelativePowerLevelThreshold

A relative threshold is the power below 'Wanted mean channel power',
where channel will be qualified for mean power calculations.
An absolute threshold(X) for a channel is the difference between
'Wanted mean channel pow…

Unsigned32r/w

Constraints:
range: 30-150

.1.3.6.1.4.1.8708.2.4.2.15.1.1.34

wdmMeanChannelPowerControlIncreaseGain

Increases the amplifier gain by 1 dB. Also triggers a regulation
starting at the new gain. This is useful when amplifier gain is too
low and no channels are qualified to regulate.The user is expected
to press Increase G…

LUM-TCCommandString

Description:

tbd

.1.3.6.1.4.1.8708.2.4.2.15.1.1.35