LUM-TOPOLOGY-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
68

topoIntTable

table
.1.3.6.1.4.1.8708.2.8.2.2.1 · 1 row entry · 13 columns
Open in standard view
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk topoIntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-TOPOLOGY-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-TOPOLOGY-MIB::topoIntTable' 
The internal connection list.
topoIntEntry row .1.3.6.1.4.1.8708.2.8.2.2.1.1
An entry in the internal connection list.

Describes a physical connection between two ports
within the same network element.

Connections between rxTx ports are
implicitly bi-directional, only o…
Indexes
Column Syntax OID
topoIntIndex
An arbitrary index assigned to each entry.
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.8708.2.8.2.2.1.1.1
topoIntFromSubrack
The subrack number for this end of the
connection.

This attribute can be written via SNMP.
LUM-TCSubrackNumberr/w
Type Constraints:
range: 0..15
Description:
The number of a subrack within a network element.

0 signifies an undefined subrack number.
 .1.3.6.1.4.1.8708.2.8.2.2.1.1.2
topoIntFromSlot
The slot number for this end of the
connection.

This attribute can be written via SNMP.
LUM-TCSlotNumberr/w
Type Constraints:
range: 0..22
Description:
The number of a slot within a subrack.

0 signifies an undefined slot number.
 .1.3.6.1.4.1.8708.2.8.2.2.1.1.3
topoIntFromPort
The port number for this end of the connection.

This attribute can be written via SNMP.
LUM-TCPortNumberr/w
Type Constraints:
range: 0..116
Description:
The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.
 .1.3.6.1.4.1.8708.2.8.2.2.1.1.4
topoIntToSubrack
The subrack number for the other end of the
connection.

This attribute can be written via SNMP.
LUM-TCSubrackNumberr/w
Type Constraints:
range: 0..15
Description:
The number of a subrack within a network element.

0 signifies an undefined subrack number.
 .1.3.6.1.4.1.8708.2.8.2.2.1.1.5
topoIntToSlot
The slot number for the other end of the
connection.

This attribute can be written via SNMP.
LUM-TCSlotNumberr/w
Type Constraints:
range: 0..22
Description:
The number of a slot within a subrack.

0 signifies an undefined slot number.
 .1.3.6.1.4.1.8708.2.8.2.2.1.1.6
topoIntToPort
The port number for the other end of the
connection.

This attribute can be written via SNMP.
LUM-TCPortNumberr/w
Type Constraints:
range: 0..116
Description:
The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.
 .1.3.6.1.4.1.8708.2.8.2.2.1.1.7
topoIntDescr
User configurable description.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8708.2.8.2.2.1.1.8
topoIntDirectiondeprecated
Note: Deprecated!
Indicates what type of ports are connected.
LUM-TCPortType
Type Values:
1rx
2tx
3biDi
Description:
tbd description
tbd rxTx?
 .1.3.6.1.4.1.8708.2.8.2.2.1.1.9
topoIntRowStatus
Manages creation and deletion of conceptual rows.
See also SNMPv2-TC.

This attribute can be written via SNMP.

Note: The newly created object will not necessarily
receive the same index as u…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.8708.2.8.2.2.1.1.10
topoIntName
The name of the topology entry.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8708.2.8.2.2.1.1.11
topoIntFromIfNo
The interface number for this end of the connection.
The local physical interface number of the actual multi-connector port.
LUM-TCPortNumberr/w
Type Constraints:
range: 0..116
Description:
The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.
 .1.3.6.1.4.1.8708.2.8.2.2.1.1.12
topoIntToIfNo
The interface number for the far end of the connection.
The local physical interface number of the actual multi-connector port.
LUM-TCPortNumberr/w
Type Constraints:
range: 0..116
Description:
The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.
 .1.3.6.1.4.1.8708.2.8.2.2.1.1.13

topoPeerTable

table
.1.3.6.1.4.1.8708.2.8.2.3.1 · 1 row entry · 17 columns
Open in standard view
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk topoPeerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-TOPOLOGY-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-TOPOLOGY-MIB::topoPeerTable' 
The peer connection list.
topoPeerEntry row .1.3.6.1.4.1.8708.2.8.2.3.1.1
An entry in the peer connection list.

Describes a physical connection between two ports
on two network elements. The definition should be
present in both network elements.
Indexes
Column Syntax OID
topoPeerIndex
An arbitrary index assigned to each entry.
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.8708.2.8.2.3.1.1.1
topoPeerLocalSubrack
Local subrack number.

This attribute can be written via SNMP.
LUM-TCSubrackNumberr/w
Type Constraints:
range: 0..15
Description:
The number of a subrack within a network element.

0 signifies an undefined subrack number.
 .1.3.6.1.4.1.8708.2.8.2.3.1.1.2
topoPeerLocalSlot
Local slot number.

This attribute can be written via SNMP.
LUM-TCSlotNumberr/w
Type Constraints:
range: 0..22
Description:
The number of a slot within a subrack.

0 signifies an undefined slot number.
 .1.3.6.1.4.1.8708.2.8.2.3.1.1.3
topoPeerLocalPort
Local port number.

This attribute can be written via SNMP.
LUM-TCPortNumberr/w
Type Constraints:
range: 0..116
Description:
The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.
 .1.3.6.1.4.1.8708.2.8.2.3.1.1.4
topoPeerRemoteIpAddress
The IP address of the remote network element.

This attribute can be written via SNMP.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8708.2.8.2.3.1.1.5
topoPeerRemoteSubrack
Remote subrack number.

This attribute can be written via SNMP.
LUM-TCSubrackNumberr/w
Type Constraints:
range: 0..15
Description:
The number of a subrack within a network element.

0 signifies an undefined subrack number.
 .1.3.6.1.4.1.8708.2.8.2.3.1.1.6
topoPeerRemoteSlot
Remote slot number.

This attribute can be written via SNMP.
LUM-TCSlotNumberr/w
Type Constraints:
range: 0..22
Description:
The number of a slot within a subrack.

0 signifies an undefined slot number.
 .1.3.6.1.4.1.8708.2.8.2.3.1.1.7
topoPeerRemotePort
Remote port number.

This attribute can be written via SNMP.
LUM-TCPortNumberr/w
Type Constraints:
range: 0..116
Description:
The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.
 .1.3.6.1.4.1.8708.2.8.2.3.1.1.8
topoPeerDescr
User configurable description.

This attribute can be written via SNMP.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8708.2.8.2.3.1.1.9
topoPeerDirectiondeprecated
Note: Deprecated!
Indicates what type of port is connected in the
local network element.
LUM-TCPortType
Type Values:
1rx
2tx
3biDi
Description:
tbd description
tbd rxTx?
 .1.3.6.1.4.1.8708.2.8.2.3.1.1.10
topoPeerRowStatus
Manages creation and deletion of conceptual rows.
See also SNMPv2-TC.

This attribute can be written via SNMP.

Note: The newly created object will not necessarily
receive the same index as u…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.8708.2.8.2.3.1.1.11
topoPeerName
The name of the topology entry.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8708.2.8.2.3.1.1.12
topoPeerLinkAttenuation
Value describing the attenuation of the
fiber carrying the peer.

The value must be supplied by the user,
typically done at installation.
Unsigned32r/w
Constraints:
range: 0-1000
 .1.3.6.1.4.1.8708.2.8.2.3.1.1.13
topoPeerLocalLabel
A label identifying the local
end of the peer.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8708.2.8.2.3.1.1.14
topoPeerRemoteLabel
A label identifying the remote
end of the peer.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8708.2.8.2.3.1.1.15
topoPeerLocalIfNo
Local ifNo.
LUM-TCPortNumberr/w
Type Constraints:
range: 0..116
Description:
The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.
 .1.3.6.1.4.1.8708.2.8.2.3.1.1.16
topoPeerRemoteIfNo
Remote ifNo.
LUM-TCPortNumberr/w
Type Constraints:
range: 0..116
Description:
The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.
 .1.3.6.1.4.1.8708.2.8.2.3.1.1.17

topoClientTable

table
.1.3.6.1.4.1.8708.2.8.2.4.1 · 1 row entry · 17 columns
Open in standard view
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk topoClientTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-TOPOLOGY-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-TOPOLOGY-MIB::topoClientTable' 
The client list.
topoClientEntry row .1.3.6.1.4.1.8708.2.8.2.4.1.1
An entry in the client connection list.

Describes a physical connection between a
network element and a client node.
Indexes
Column Syntax OID
topoClientIndex
An arbitrary index assigned to each entry.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.8.2.4.1.1.1
topoClientLocalInSubrack
Local incoming sub-rack number for the
connection.

This attribute can be written via SNMP.
LUM-TCSubrackNumberr/w
Type Constraints:
range: 0..15
Description:
The number of a subrack within a network element.

0 signifies an undefined subrack number.
 .1.3.6.1.4.1.8708.2.8.2.4.1.1.2
topoClientLocalInSlot
Local incoming slot number for the
connection.

This attribute can be written via SNMP.
LUM-TCSlotNumberr/w
Type Constraints:
range: 0..22
Description:
The number of a slot within a subrack.

0 signifies an undefined slot number.
 .1.3.6.1.4.1.8708.2.8.2.4.1.1.3
topoClientLocalInPort
Local incoming port number for the
connection.

This attribute can be written via SNMP.
LUM-TCPortNumberr/w
Type Constraints:
range: 0..116
Description:
The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.
 .1.3.6.1.4.1.8708.2.8.2.4.1.1.4
topoClientRemoteIpAddress
The client IP address.

This attribute can be written via SNMP.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8708.2.8.2.4.1.1.5
topoClientRemoteIfIndex
The client interface index.

This attribute can be written via SNMP.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.8.2.4.1.1.6
topoClientDescr
User configurable description.

This attribute can be written via SNMP.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8708.2.8.2.4.1.1.7
topoClientDirectiondeprecated
Note: Deprecated!
Indicates what type of port is connected in the
local network element.
LUM-TCPortType
Type Values:
1rx
2tx
3biDi
Description:
tbd description
tbd rxTx?
 .1.3.6.1.4.1.8708.2.8.2.4.1.1.8
topoClientRowStatus
Manages creation and deletion of conceptual rows.
See also SNMPv2-TC.

This attribute can be written via SNMP.

Note: The newly created object will not necessarily
receive the same index as u…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.8708.2.8.2.4.1.1.9
topoClientName
The name of the topology entry.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8708.2.8.2.4.1.1.10
topoClientLocalOutSubrack
Local out-going sub-rack number.

This attribute can be written via SNMP.
LUM-TCSubrackNumberr/w
Type Constraints:
range: 0..15
Description:
The number of a subrack within a network element.

0 signifies an undefined subrack number.
 .1.3.6.1.4.1.8708.2.8.2.4.1.1.11
topoClientLocalOutSlot
Local out-going slot number for the
connection.

This attribute can be written via SNMP.
LUM-TCSlotNumberr/w
Type Constraints:
range: 0..22
Description:
The number of a slot within a subrack.

0 signifies an undefined slot number.
 .1.3.6.1.4.1.8708.2.8.2.4.1.1.12
topoClientLocalOutPort
Local out-going port number for the
connection.

This attribute can be written via SNMP.
LUM-TCPortNumberr/w
Type Constraints:
range: 0..116
Description:
The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.
 .1.3.6.1.4.1.8708.2.8.2.4.1.1.13
topoClientChannelId
Defines the channel in the port that is
referred to. Only to be used when referring to a
sub-channel on a multiplexed interface, e.g.
for muxponders.

This attribute can be written via SNMP.
Unsigned32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.8708.2.8.2.4.1.1.14
topoClientInterfaceRepresentation
Compact representation of

localOutSubrack/Slot/Port
localInSubrack/Slot/Port
not used for ifNo

Used in the backup.
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.8708.2.8.2.4.1.1.15
topoClientLocalOutIfNo
The local physical interface number of the actual multi-connector port.
LUM-TCPortNumberr/w
Type Constraints:
range: 0..116
Description:
The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.
 .1.3.6.1.4.1.8708.2.8.2.4.1.1.16
topoClientLocalInIfNo
The local physical interface number of the actual multi-connector port.
LUM-TCPortNumberr/w
Type Constraints:
range: 0..116
Description:
The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.
 .1.3.6.1.4.1.8708.2.8.2.4.1.1.17

topoSegmentTable

table
.1.3.6.1.4.1.8708.2.8.2.5.1 · 1 row entry · 21 columns
Open in standard view
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk topoSegmentTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-TOPOLOGY-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-TOPOLOGY-MIB::topoSegmentTable' 
The segment list.
topoSegmentEntry row .1.3.6.1.4.1.8708.2.8.2.5.1.1
An entry in the segment list.
Indexes
Column Syntax OID
topoSegmentIndex
An arbitrary index assigned to each entry.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.8.2.5.1.1.1
topoSegmentName
Name of segment
LUM-TCMgmtNameString
Type Constraints:
range: 0..255
Description:
An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.
 .1.3.6.1.4.1.8708.2.8.2.5.1.1.2
topoSegmentInSubrack
The number of the subrack where the segment
starts.
LUM-TCSubrackNumber
Type Constraints:
range: 0..15
Description:
The number of a subrack within a network element.

0 signifies an undefined subrack number.
 .1.3.6.1.4.1.8708.2.8.2.5.1.1.3
topoSegmentInSlot
The number of the slot where the segment
starts.
LUM-TCSlotNumber
Type Constraints:
range: 0..22
Description:
The number of a slot within a subrack.

0 signifies an undefined slot number.
 .1.3.6.1.4.1.8708.2.8.2.5.1.1.4
topoSegmentInPort
The number of the port where the segment
starts.
LUM-TCPortNumber
Type Constraints:
range: 0..116
Description:
The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.
 .1.3.6.1.4.1.8708.2.8.2.5.1.1.5
topoSegmentOutSubrack
The number of the subrack where the segment ends.
LUM-TCSubrackNumber
Type Constraints:
range: 0..15
Description:
The number of a subrack within a network element.

0 signifies an undefined subrack number.
 .1.3.6.1.4.1.8708.2.8.2.5.1.1.6
topoSegmentOutSlot
The number of the slot where the segment ends.
LUM-TCSlotNumber
Type Constraints:
range: 0..22
Description:
The number of a slot within a subrack.

0 signifies an undefined slot number.
 .1.3.6.1.4.1.8708.2.8.2.5.1.1.7
topoSegmentOutPort
The number of the port where the segment ends.
LUM-TCPortNumber
Type Constraints:
range: 0..116
Description:
The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.
 .1.3.6.1.4.1.8708.2.8.2.5.1.1.8
topoSegmentFrequencyType
The wavelength/frequency associated with the segment.
0 if no wavelength is applicable
LUM-TCLambdaType
Type Values:
1fixed
2range
3transparent
4interleavedOdd
5interleavedEven
6interleaved50GHzOdd
7interleaved50GhzEven
Description:
Indicates the type of wavelength a port can
accomodate.

fixed - The port received or transmits a fixed
frequency.

range - The port can handle a range of
frequencies.

transparent - There …
 .1.3.6.1.4.1.8708.2.8.2.5.1.1.9
topoSegmentFrequency
The wavelength/frequency associated with the segment.
0 if no wavelength is applicable
LUM-TCLambdaFrequency
Type Values:
0undefined
1iWdmPonFrequency
2otclg
130b1300
150b1500
850w850
1270w1270
1290w1290
1310w1310
1330w1330
1350w1350
1370w1370
1390w1390
1410w1410
1430w1430
1450w1450
1470w1470
1490w1490
1510w1510
1530w1530
1550w1550
1570w1570
1590w1590
1610w1610
1611w1611
18710ch871
18730ch873
18750ch875
18770ch877
18790ch879
18810ch881
18830ch883
18850ch885
18870ch887
18890ch889
18910ch891
18930ch893
18950ch895
18970ch897
18990ch899
19010ch901
19030ch903
19050ch905
19070ch907
19090ch909
19135ch9135
19140ch914
19145ch9145
19150ch915
19155ch9155
19160ch916
19165ch9165
19170ch917
19175ch9175
19180ch918
19185ch9185
19190ch919
19195ch9195
19200ch920
19205ch9205
19210ch921
19215ch9215
19220ch922
19225ch9225
19230ch923
19235ch9235
19240ch924
19245ch9245
19250ch925
19255ch9255
19260ch926
19265ch9265
19270ch927
19275ch9275
19280ch928
19285ch9285
19290ch929
19295ch9295
19300ch930
19305ch9305
19310ch931
19315ch9315
19320ch932
19325ch9325
19330ch933
19335ch9335
19340ch934
19345ch9345
19350ch935
19355ch9355
19360ch936
19365ch9365
19370ch937
19375ch9375
19380ch938
19385ch9385
19390ch939
19395ch9395
19400ch940
19405ch9405
19410ch941
19415ch9415
19420ch942
19425ch9425
19430ch943
19435ch9435
19440ch944
19445ch9445
19450ch945
19455ch9455
19460ch946
19465ch9465
19470ch947
19475ch9475
19480ch948
19485ch9485
19490ch949
19495ch9495
19500ch950
19505ch9505
19510ch951
19515ch9515
19520ch952
19525ch9525
19530ch953
19535ch9535
19540ch954
19545ch9545
19550ch955
19555ch9555
19560ch956
19565ch9565
19570ch957
19575ch9575
19580ch958
19585ch9585
19590ch959
19595ch9595
19600ch960
19605ch9605
19610ch961
Description:
The frequency of the 'wavelength' given in hundreds
of GHz (0.01 GHz).
 .1.3.6.1.4.1.8708.2.8.2.5.1.1.10
topoSegmentSubChannelId
The subchannel of the segment.

Applicable if several signals are multiplexed on
the same wavelength
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.8.2.5.1.1.11
topoSegmentBegin
The start point of the segment.
SegmentEndPoint
Type Values:
0undefined
1trunc
2client
3crossConnect
4incomplete
 .1.3.6.1.4.1.8708.2.8.2.5.1.1.12
topoSegmentType
The end point of the segment.
SegmentEndPoint
Type Values:
0undefined
1trunc
2client
3crossConnect
4incomplete
 .1.3.6.1.4.1.8708.2.8.2.5.1.1.13
topoSegmentInEntityId
The entity ID of the first port.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.8.2.5.1.1.14
topoSegmentOutEntityId
The entity ID of the last port.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.8.2.5.1.1.15
topoSegmentEntityList
A list of all entities
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8708.2.8.2.5.1.1.16
topoSegmentObjectList
A list of all ports
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8708.2.8.2.5.1.1.17
topoSegmentDirection
Direction of segment with respect to the
cross connect, if any.
ConnSegmentDirType
Type Values:
0undefined
1rx
2tx
3biDi
4unused
5txRx
 .1.3.6.1.4.1.8708.2.8.2.5.1.1.18
topoSegmentEntryPointsCommand
Command to list entry points.
LUM-TCCommandString
Description:
tbd
 .1.3.6.1.4.1.8708.2.8.2.5.1.1.19
topoSegmentSubSegmentsCommand
Command to list subsegments
LUM-TCCommandString
Description:
tbd
 .1.3.6.1.4.1.8708.2.8.2.5.1.1.20
topoSegmentUniqId
The entity ID of the last port.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.8.2.5.1.1.21