LUM-SYNC-MIB Table View

Type Constraints:
range: 0..255

Description:

An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.

.1.3.6.1.4.1.8708.2.16.2.2.1.1.2

syncGroupSubrack

The subrack number for the group of interfaces.

LUM-TCSubrackNumber

Type Constraints:
range: 0..15

Description:

The number of a subrack within a network element.

0 signifies an undefined subrack number.

.1.3.6.1.4.1.8708.2.16.2.2.1.1.3

syncGroupSlot

The slot number for the group of interfaces.

LUM-TCSlotNumber

Type Constraints:
range: 0..22

Description:

The number of a slot within a subrack.

0 signifies an undefined slot number.

.1.3.6.1.4.1.8708.2.16.2.2.1.1.4

syncGroupMode

The sync mode for the sync group.

manual - Sync source is chosen manually.

auto - The sync source is chosen automatically.

Enumerationr/w

Enumerated Values:

1	manual
2	auto

.1.3.6.1.4.1.8708.2.16.2.2.1.1.5

syncGroupManualSource

The name of the sync source currently used
to sync the trunk.

Unsigned32r/w

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.8708.2.16.2.2.1.1.6

syncGroupSelectedSource

The name for the sync source currently used
to sync the trunk.

Type Constraints:
range: 0..255

Description:

An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.

.1.3.6.1.4.1.8708.2.16.2.2.1.1.7

syncGroupQuality

The sync quality that will be distributed to the
outgoing (client) tributaries.

Unsigned32

Constraints:
range: 0-15

.1.3.6.1.4.1.8708.2.16.2.2.1.1.8

syncGroupLocalOscActiveW2Cdeprecated

Local oscillator used to sync clients.

A: The sync for clients is taken from the local
sync source.

D: The sync for clients is taken from the WDM
signal.

Type Values:

1	ok
2	alarm

Description:

A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…

.1.3.6.1.4.1.8708.2.16.2.2.1.1.9

syncGroupLocalOscActive

Local oscillator used to synchronize trunc and clients

A: The sync is taken from the local sync source.

D: The sync is taken from the trunc or any of the client
signals.

LUM-TCBoardOrInterfaceAdminStatusr/w

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.16.2.2.1.1.10

syncGroupAdminStatus

Administrative state for the sync group.

down - Alarms are not sent.

up - The sync function is enabled

service - Alarms are not sent

Type Values:

1	down
2	service
3	up

Description:

The administrative state for a board or
interface.

down - The board/interface should be inactive.

service - The board/interface is activated but
alarms are suppressed. Intended for use during
servi…

.1.3.6.1.4.1.8708.2.16.2.2.1.1.11

syncGroupOperStatus

The operational state for the sync group.

notPresent - The physical resource is not
available.

down - The sync group is disabled.

up - The sync group is enabled.

LUM-TCBoardOrInterfaceOperStatus

Type Values:

1	notPresent
2	down
3	up

Description:

The operational state for a board or interface.

notPresent - The board/interface is not available.

down - The board/interface is de-activated or
there are faults preventing it from going to the
'up…

.1.3.6.1.4.1.8708.2.16.2.2.1.1.12

syncGroupRingModedeprecated

Decides whether sync group is part of a sync
ring or not.

off - Used when the muxponder is used as a
terminal multiplexor for point-to-point
connections, or as a hub-node in an SDH ring.
In this mode, the…

Enumerationr/w

Enumerated Values:

1	off
2	on

.1.3.6.1.4.1.8708.2.16.2.2.1.1.13

syncGroupLastChangeTime

The time when the sync selected sync source
changed the last time.

SNMPv2-TCDateAndTime

Type Constraints:
range: 8
range: 11

Description:

A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …

.1.3.6.1.4.1.8708.2.16.2.2.1.1.14

syncGroupManualSourceName

The name of the sync source that the user
has selected to sync the trunk and the outgoing
(client) tributaries. Only applicable if
'manual' is used.

LUM-TCMgmtNameStringr/w

Type Constraints:
range: 0..255

Description:

An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.

.1.3.6.1.4.1.8708.2.16.2.2.1.1.15

syncGroupConfigurationMode

Decides the synchronization behaviour.

neverUseTrunc - Used when the muxponder is
used as a terminal multiplexor for point-to-point
connections, or as a hub-node in an SDH ring.
In this mode, the incoming…

Enumerationr/w

Enumerated Values:

1	neverUseTrunc
2	uniDirRingSatellite
3	standardG707

.1.3.6.1.4.1.8708.2.16.2.2.1.1.16

syncGroupStatus

The status for the selected source.

normal - The selected source is not in holdover mode.

holdover - The selected source is in holdover (digital hold) mode.

Enumeration

Enumerated Values:

1	normal
2	holdover

.1.3.6.1.4.1.8708.2.16.2.2.1.1.17

syncGroupSourceSwitch

The command for performing a manual or forced sync source switch
as defined in ITU-T G.781:

- The manual switched source can be used to override the currently
selected source, on condition that the manu…

syncGroupSourceSwitchType

Description:

tbd

.1.3.6.1.4.1.8708.2.16.2.2.1.1.18

Indication on what caused the currently selected source to be selected.

auto - The source was selected from a normal sync selection process
without any user commands.
manual - The source was…

Enumeration

Enumerated Values:

1	auto
2	manual
3	forced

.1.3.6.1.4.1.8708.2.16.2.2.1.1.19

syncGroupHoldover

The sync group is in holdover mode.

A: The chosen sync source has gone into holdover (digital hold) mode,
or no source has been chosen.

D: A sync source is chosen which is not holdover m…

syncGroupQualityLevelSelectionMode

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.16.2.2.1.1.20

Indicates wether the sync group is operating in Quality Level selection mode.
For Layer 2 ethernet boards, this attribute is dependant on the configuration
of the sync domain that the group is a member of. If the group …

Enumeration

Enumerated Values:

1	disabled
2	enabled

.1.3.6.1.4.1.8708.2.16.2.2.1.1.21

syncGroupAdoptSourceQuality

Adopt all sync source qualities in the group as the expected sync source qualities.

Description:

tbd

.1.3.6.1.4.1.8708.2.16.2.2.1.1.22

syncSourceTable

table

.1.3.6.1.4.1.8708.2.16.2.3.1 · 1 row entry · 23 columns

Open in standard view

Uses the infinera variant from /opt/observium/mibs/infinera.

Command help

Walk syncSourceTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-SYNC-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-SYNC-MIB::syncSourceTable'

The sync source table.

syncSourceEntry row .1.3.6.1.4.1.8708.2.16.2.3.1.1

An entry in the sync source table.

Indexes

syncSourceIndex

Column Syntax OID

syncSourceIndex

An arbitrary index assigned to the sync source.

Unsigned32

Constraints:
range: 1-2000000000

.1.3.6.1.4.1.8708.2.16.2.3.1.1.1

syncSourceName

The name of the sync source.

LUM-TCBoardOrInterfaceOperStatus

Type Constraints:
range: 0..255

Description:

An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.

.1.3.6.1.4.1.8708.2.16.2.3.1.1.2

syncSourceId

A unique number of the source within its group.

Unsigned32r/w

Constraints:
range: 0-10000

.1.3.6.1.4.1.8708.2.16.2.3.1.1.3

syncSourceRxPort

The port number for the Rx-side of the interface
where the signal is retrieved.

0 if the sync source is a local oscillator.

LUM-TCPortNumberr/w

Type Constraints:
range: 0..116

Description:

The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.

.1.3.6.1.4.1.8708.2.16.2.3.1.1.4

syncSourceTxPort

The port number for the Tx-side of the interface
where the signal is retrieved.

0 if the sync source is a local oscillator.

LUM-TCPortNumberr/w

Type Constraints:
range: 0..116

Description:

The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.

.1.3.6.1.4.1.8708.2.16.2.3.1.1.5

syncSourceType

The type of sync source.

oscillator - The sync source is a local
oscillator.

signal - The sync source is a signal.

external - External sync source

bus - The sy…

Enumerationr/w

Enumerated Values:

1	oscillator
2	signal
3	external
4	bus

.1.3.6.1.4.1.8708.2.16.2.3.1.1.6

syncSourceQuality

The quality for the sync source. The received S1-byte
is shown.

The integer values can be interpreted as follows:

SDH/SyncE (G.707/G.781):
S1 Quality Description
-----------------------
0…

Unsigned32

Constraints:
range: 0-18

.1.3.6.1.4.1.8708.2.16.2.3.1.1.7

syncSourcePriority

The sync source priority.
Used to prioritize among sync source with the
same quality.

1 is the best, 16 is the worst.

Unsigned32r/w

Constraints:
range: 1-16

.1.3.6.1.4.1.8708.2.16.2.3.1.1.8

syncSourceAdminStatus

Administrative state for the sync source.

down - The sync source is disabled.

up - The sync source is enabled and can be
used for syncing.

LUM-TCAdminStatusr/w

Type Values:

1	down
2	up

Description:

The administrative state with only up and down.

down - The interface should be inactive.

up - The interface should be activated.

.1.3.6.1.4.1.8708.2.16.2.3.1.1.9

syncSourceOperStatus

The operational state for the sync source.

notPresent - The physical resource is not
available.

down - The sync source is disabled.

up - The sync source is enabled.

Type Values:

1	notPresent
2	down
3	up

Description:

.1.3.6.1.4.1.8708.2.16.2.3.1.1.10

syncSourceIsSelected

Shows if the sync source is selected or not.

false - The sync source is not in use.

true - The sync source is in use.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.8708.2.16.2.3.1.1.11

syncSourceAlwaysSendDoNotUse

This attribute controls whether to ALWAYS
send S1 = 'Do not use' on the port
corresponding to this source.

disabled - Send the actual S1 value of the
synchronization function. However, if this
source is t…

Enumerationr/w

Enumerated Values:

1	disabled
2	enabled

.1.3.6.1.4.1.8708.2.16.2.3.1.1.12

syncSourceStaticQuality

This attribute is used to assign a static G.781 Option 1
Quality level to the source for use in the Synch Source
Selection process. Values are interpreted as below:

S1 Quality Decsription
---------------…

Unsigned32r/w

Constraints:
range: 0-15

.1.3.6.1.4.1.8708.2.16.2.3.1.1.13

syncSourceFilterState

The state of the source in the synchronization selection
algorithm it is included in.

undefined - The source is not included in any selection
algorithm or the state is not been reported.
norma…

LUM-TCSyncSourceState

Type Values:

0	undefined
1	normal
2	failed
3	waitToRestore

Description:

State of synchronization source included in a
synchronization selection process as per defined
in ITU-T G.781.

.1.3.6.1.4.1.8708.2.16.2.3.1.1.14

syncSourceMode

The operating mode of the sync source.

disabled - The source is disabled from the sync selection process
and will not send or terminate SSM messages.
Any incoming SSM messag…

LUM-TCSyncSourceModer/w

Type Values:

0	disabled
1	enabled
2	lockedOut

Description:

Operating mode of a synchronization source.

disabled - The source is disabled from the sync selection process
and will not send or terminate SSM messages.
Any incoming SSM messages will…

.1.3.6.1.4.1.8708.2.16.2.3.1.1.15

syncSourceClearWaitToRestore

Clears an active Wait To Restore timer for the sync source.

syncSourceClockWanderExceeded

Description:

tbd

.1.3.6.1.4.1.8708.2.16.2.3.1.1.16

The sync source has drifted at a rate that exceeds the limit.

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.16.2.3.1.1.17

syncSourceNonSyncEClock

Sync source not SyncE compliant.

syncSourceExpectedQuality

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.16.2.3.1.1.18

syncSourceIfNo

The physical interface number of the actual multi-connector port.

LUM-TCPortNumberr/w

Type Constraints:
range: 0..116

Description:

The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.

.1.3.6.1.4.1.8708.2.16.2.3.1.1.19

syncSourceUpPortId

Internal port reference for traffic unit.

Integer32r/w

Constraints:
range: -1-2147483647

.1.3.6.1.4.1.8708.2.16.2.3.1.1.20

syncSourceLocalId

Id for index calculation.

Integer32r/w

Constraints:
range: -1-2147483647

.1.3.6.1.4.1.8708.2.16.2.3.1.1.21

Sets the expected quality for the unexpected SyncE source quality alarm.

Unsigned32r/w

Constraints:
range: 0-18

.1.3.6.1.4.1.8708.2.16.2.3.1.1.22

syncSourceUnexpectedSyncEQuality

The sync quality level of a source differs from its expected value, defined by the expected quality attribute.
If the expected quality level is 0 or source is disabled, this alarm will never be raised.

A:…

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.16.2.3.1.1.23

syncSubrackTable

table deprecated

.1.3.6.1.4.1.8708.2.16.2.5.1 · 1 row entry · 8 columns

Open in standard view

Uses the infinera variant from /opt/observium/mibs/infinera.

Command help

Walk syncSubrackTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-SYNC-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-SYNC-MIB::syncSubrackTable'

The sync subrack table.
Note: This table is deprecated!

syncSubrackEntry row .1.3.6.1.4.1.8708.2.16.2.5.1.1

An entry in the sync subrack table.

Indexes

syncSubrackIndex

Column	Syntax	OID
syncSubrackIndexdeprecated An arbitrary index assigned to each if entry.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.8708.2.16.2.5.1.1.1`
syncSubrackNamedeprecated The name of the sync subrack.	LUM-TCMgmtNameString Type Constraints: `range: 0..255` Description: An octet string containing administrative information, in human-readable form. More or less the same as SnmpAdminString defined in SNMP-FRAMEWORK-MIB.	`.1.3.6.1.4.1.8708.2.16.2.5.1.1.2`
syncSubrackSubrackdeprecated The subrack number.	LUM-TCSubrackNumber Type Constraints: `range: 0..15` Description: The number of a subrack within a network element. 0 signifies an undefined subrack number.	`.1.3.6.1.4.1.8708.2.16.2.5.1.1.3`
syncSubrackMasterBusAdeprecated The slotnumber for the sync group currently driving local bus A.	LUM-TCSlotNumberr/w Type Constraints: `range: 0..22` Description: The number of a slot within a subrack. 0 signifies an undefined slot number.	`.1.3.6.1.4.1.8708.2.16.2.5.1.1.4`
syncSubrackMasterBusBdeprecated The slotnumber for the sync group currently driving local bus B.	LUM-TCSlotNumberr/w Type Constraints: `range: 0..22` Description: The number of a slot within a subrack. 0 signifies an undefined slot number.	`.1.3.6.1.4.1.8708.2.16.2.5.1.1.5`
syncSubrackConfigureLocalBusdeprecated Configures synchronization of the local buses.	LUM-TCCommandString Description: tbd	`.1.3.6.1.4.1.8708.2.16.2.5.1.1.6`
syncSubrackGroupMasterBusAdeprecated The sync group currently driving local bus A.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.8708.2.16.2.5.1.1.7`
syncSubrackGroupMasterBusBdeprecated The sync group currently driving local bus B.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.8708.2.16.2.5.1.1.8`

syncDomainTable

table

.1.3.6.1.4.1.8708.2.16.2.6.1 · 1 row entry · 12 columns

Open in standard view

Uses the infinera variant from /opt/observium/mibs/infinera.

Command help

Walk syncDomainTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-SYNC-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-SYNC-MIB::syncDomainTable'

The sync domain table.

syncDomainEntry row .1.3.6.1.4.1.8708.2.16.2.6.1.1

An entry in the sync domain table.

Indexes

syncDomainIndex

Column Syntax OID

syncDomainIndex

An arbitrary index assigned to each domain entry.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.8708.2.16.2.6.1.1.1

syncDomainNumber

The number unique to each domain entry.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.8708.2.16.2.6.1.1.2

syncDomainName

The name of the sync domain.

syncDomainQualityLevelSelectionMode

Type Constraints:
range: 0..255

Description:

An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.

.1.3.6.1.4.1.8708.2.16.2.6.1.1.3

The mode in which the Synchronization Selection Process
for the domain operates.
enabled - The reported Quality Level of the
Synchronization sources are taken into
account in the selection proces…

Enumerationr/w

Enumerated Values:

1	disabled
2	enabled

.1.3.6.1.4.1.8708.2.16.2.6.1.1.4

syncDomainWaitToRestore

The time in minutes that a synchronization source
is removed from the synchronization selection process
after it has changed its Quality level from Failed to
another value. The time is configurable in the range
from 0 t…

Unsigned32r/w

Constraints:
range: 0-12

.1.3.6.1.4.1.8708.2.16.2.6.1.1.5

syncDomainHoldOff

The time in milliseconds that a source should have
failed until this is passed on the Synchronization
selection process.

Unsigned32r/w

Constraints:
range: 0-1800

.1.3.6.1.4.1.8708.2.16.2.6.1.1.6

syncDomainSource

The name of the currently selected sync source.

Type Constraints:
range: 0..255

Description:

An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.

.1.3.6.1.4.1.8708.2.16.2.6.1.1.7

syncDomainQuality

The quality of the currently selected sync source.

Unsigned32

Constraints:
range: 0-15

.1.3.6.1.4.1.8708.2.16.2.6.1.1.8

syncDomainAssociateBoard

Assigns boards to a sync domain.

Boards within a domain will share domain configuration
and information on the sync quality of the sync signal
being distributed in the domain. A sync bus must also
be assi…

LUM-TCBoardOrInterfaceAdminStatusr/w

Description:

tbd

.1.3.6.1.4.1.8708.2.16.2.6.1.1.9

syncDomainAdminStatus

Administrative state for the sync domain.

down - Alarms are not sent.

up - The sync function is enabled

service - Alarms are not sent

Type Values:

1	down
2	service
3	up

Description:

.1.3.6.1.4.1.8708.2.16.2.6.1.1.10

syncDomainExpectedQuality

Sets the expected quality for the unexpected SyncE domain quality alarm.

Unsigned32r/w

Constraints:
range: 0-18

.1.3.6.1.4.1.8708.2.16.2.6.1.1.11

syncDomainUnexpectedSyncEQuality

The quality level of the sync signal propagated in the sync domain differs from its expected value,
defined by the expected quality attribute.
If the expected quality level is 0 or quality level selection is disabled, t…