LUM-SNMP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
22

snmpInformSinkTable

table
.1.3.6.1.4.1.8708.2.17.2.1.1 · 1 row entry · 14 columns
Open in standard view
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk snmpInformSinkTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-SNMP-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-SNMP-MIB::snmpInformSinkTable' 
The notification (trap) receiver configuration
directives list.
snmpInformSinkEntry row .1.3.6.1.4.1.8708.2.17.2.1.1.1
An entry in the notification (trap) receiver
list. Typically there should be one row
for each management system.

Only SNMPv2c trap receivers are supported.

Create:

<address>[:<port…
Indexes
Column Syntax OID
snmpInformSinkIndex
An arbitrary index assigned to each entry.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.17.2.1.1.1.1
snmpInformSinkName
Name assigned to each entry.
SNMPv2-TCDisplayString
Constraints:
range: 0-255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8708.2.17.2.1.1.1.2
snmpInformSinkAddr
The IP address for the notification (trap)
recevier.

This attribute can be written via SNMP.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.8708.2.17.2.1.1.1.3
snmpInformSinkPort
The port number for the notification (trap)
receiver.

This attribute can be written via SNMP.
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.8708.2.17.2.1.1.1.4
snmpInformSinkCommunity
The community string included in the
notification (trap).
Only SNMPv2c notifications (traps) are supported.

This attribute can be written via SNMP.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8708.2.17.2.1.1.1.5
snmpInformSinkRowStatus
Manages creation and deletion of conceptual rows.
See also SNMPv2-TC.

This attribute can be written via SNMP.

Note: The newly created object will not necessarily
receive the same index as u…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.8708.2.17.2.1.1.1.6
snmpInformSinkStorageType
Sets the storage type for the row.
See also SNMPv2-TC.

other(1) - Saved in configuration file.

volatile(2) - Not saved.

nonVolatile(3) - Not used

permanent(4) …
SNMPv2-TCStorageTyper/w
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
Description:
Describes the memory realization of a conceptual row. A
row which is volatile(2) is lost upon reboot. A row which
is either nonVolatile(3), permanent(4) or readOnly(5), is
backed up by stable storage. A row which is …
 .1.3.6.1.4.1.8708.2.17.2.1.1.1.7
snmpInformSinkAlarmNotifications
The mode for alarm notifications
(traps) for the receiver.

off - Alarms traps are inactive.

on - Alarm traps are activated.
Enumerationr/w
Enumerated Values:
1off
2on
 .1.3.6.1.4.1.8708.2.17.2.1.1.1.8
snmpInformSinkPerformanceNotifications
The mode for performance measurement
notifications (traps) for the receiver.

off - PM traps are inactive.

on - PM traps are activated.
Enumerationr/w
Enumerated Values:
1off
2on
 .1.3.6.1.4.1.8708.2.17.2.1.1.1.9
snmpInformSinkOtherNotifications
The mode for other notifications (traps)
(not alarm or performance measurement related)
for the receiver.

off - Other traps are inactive.

on - Other traps are activated.
Enumerationr/w
Enumerated Values:
1off
2on
 .1.3.6.1.4.1.8708.2.17.2.1.1.1.10
snmpInformSinkMib2Notifications
The mode to receive MIB II notifications

off - MIB II traps are inactive.

on - MIB II traps are activated.
Enumerationr/w
Enumerated Values:
1off
2on
 .1.3.6.1.4.1.8708.2.17.2.1.1.1.11
snmpInformSinkVersion
The SNMP version for the notification (trap)
recevier.

This attribute can be written via SNMP.
Enumerationr/w
Enumerated Values:
1snmpV2
2snmpV3
 .1.3.6.1.4.1.8708.2.17.2.1.1.1.12
snmpInformSinkUserName
The user name for the notification (trap) receiver.
Used for SNMPv3.

This attribute can be written via SNMP.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8708.2.17.2.1.1.1.13
snmpInformSinkIPv6Address
The IPv6 address for the notification (trap)
recevier.This is a binary string of 16 octets in network
byte-order.

This attribute can be written via SNMP.
LUM-TCInetAddressIPv6r/w
Type Constraints:
range: 16
Description:
Represents an IPv6 network address:

Octets Contents Encoding
1-16 IPv6 address network-byte order

The corresponding InetAddressType value is ipv6(2).

This textual conve…
 .1.3.6.1.4.1.8708.2.17.2.1.1.1.14

snmpUserTable

table
.1.3.6.1.4.1.8708.2.17.2.3.1 · 1 row entry · 8 columns
Open in standard view
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk snmpUserTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-SNMP-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-SNMP-MIB::snmpUserTable' 
The USM user list.
snmpUserEntry row .1.3.6.1.4.1.8708.2.17.2.3.1.1
An entry in the USM user table.

Create:

<user>[:<password>]

Default values: Password is set to the
default password.
Indexes
Column Syntax OID
snmpUserIndex
An arbitrary index assigned to each entry.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.17.2.3.1.1.1
snmpUserName
Name assigned to each entry.
Used for SNMPv3 Auth-MD5 read and write mode.

In application SNMPc
V3 Auth/Priv Security Name
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8708.2.17.2.3.1.1.2
snmpUserChangePassword
Change user password.

The password must be at least 8
characters long.

Default password is set to '1234567890'.
LUM-TCCommandStringr/w
Description:
tbd
 .1.3.6.1.4.1.8708.2.17.2.3.1.1.3
snmpUserEngineId
The engine id used when the authority key was
generated.
SNMP-FRAMEWORK-MIBSnmpEngineIDr/w
Type Constraints:
range: 5..32
 .1.3.6.1.4.1.8708.2.17.2.3.1.1.4
snmpUserAuthKey
The authority key for the user.
OctetStringr/w .1.3.6.1.4.1.8708.2.17.2.3.1.1.5
snmpUserPrivKey
The privacy key for the user.
OctetStringr/w .1.3.6.1.4.1.8708.2.17.2.3.1.1.6
snmpUserChangePrivPassword
Change user privacy password.

The password must be at least 8 characters long,
or empty to not use encryption.

Default privacy password is empty.
LUM-TCCommandStringr/w
Description:
tbd
 .1.3.6.1.4.1.8708.2.17.2.3.1.1.7
snmpUserPrivProtocol
Privacy protocol, used for encryption of SNMP data.

none - Encryption disabled. No privacy password exist.
aes128 - AES 128 is used for encryption. Privacy password exist.
Enumeration
Enumerated Values:
1none
2aes128
 .1.3.6.1.4.1.8708.2.17.2.3.1.1.8