LUM-PTP-1588-MIB Table View

Table of information about PTP clock instances.

lumPtpClockEntry row .1.3.6.1.4.1.8708.2.83.2.2.1.1

A table entry that contains PTP clock level settings, states and counters.

Indexes

lumPtpClockIndex

Column	Syntax	OID
lumPtpClockName The management name of the clock, for example 'ptpclock:1:2', where the first number indicates subrack and the second slot number.	LUM-TCMgmtNameString Type Constraints: range: 0..255 Description: An octet string containing administrative information, in human-readable form. More or less the same as SnmpAdminString defined in SNMP-FRAMEWORK-MIB.	.1.3.6.1.4.1.8708.2.83.2.2.1.1.1
lumPtpClockIndex An arbitrary index assigned to each clock entry. For each clock instnace the same index is used for all clock level standard datasets, such as DefaultDS, CurrentDS, ParentDS and TimepropertiesDS.	Unsigned32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.8708.2.83.2.2.1.1.2
lumPtpClockLocalId Internal Id used for index calculation.	Integer32 Constraints: range: -1-2147483647	.1.3.6.1.4.1.8708.2.83.2.2.1.1.3
lumPtpClockClockMode Clock mode of the PTP clock instance. clockDisabled - No PTP functions are activated for the clock instance. clockTC - The PTP clock instance is running in transparent clock mode. BC functi…	Enumerationr/w Enumerated Values: 1 clockDisabled 2 clockTC 3 clockBC	.1.3.6.1.4.1.8708.2.83.2.2.1.1.4
lumPtpClockBcClockProfile ITU-T telecom profile used by the boundary clock instance when active. profileG-8275-1 - ITU-T G.8275.1: Phase/time synchronization with full support from the network. Ethernet multicast…	Enumerationr/w Enumerated Values: 1 profileG-8275-1 2 profileG-8275-2	.1.3.6.1.4.1.8708.2.83.2.2.1.1.5
lumPtpClockClockState Clock state, as defined in ITU-T G.8275.1 Appendix V.	Enumeration Enumerated Values: 1 freerun 2 aquiring 3 locked 4 holdoverInSpec 5 holdoverOutSpec 6 unknown	.1.3.6.1.4.1.8708.2.83.2.2.1.1.6
lumPtpClockRedundancyState Redundancy state.	Enumeration Enumerated Values: 1 unknown	.1.3.6.1.4.1.8708.2.83.2.2.1.1.7
lumPtpClockTxPtpPackets Total transmitted PTP packets.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.8708.2.83.2.2.1.1.8
lumPtpClockRxPtpPackets Total received PTP packets.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.8708.2.83.2.2.1.1.9
lumPtpClockDiscardedPtpPackets Total discarded PTP packets.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.8708.2.83.2.2.1.1.10
lumPtpClockRxIPv4PtpPackets Total received IPv4 PTP packets.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.8708.2.83.2.2.1.1.11
lumPtpClockRxUdpPtpPackets Total received UDP (IPv4 + IPv6) packets.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.8708.2.83.2.2.1.1.12
lumPtpClockRxEthPtpPackets Total received Ethernet PTP packets.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.8708.2.83.2.2.1.1.13
lumPtpClockReset Reset counter trigger, fall back to normal state after set to true.	Enumerationr/w Enumerated Values: 1 normal 2 reset	.1.3.6.1.4.1.8708.2.83.2.2.1.1.14
lumPtpClockHoldoverWithinSpec The clock has lost its tracability to a master and gone onto holdover. The time error introduced due to the holdover operation is deemed to be wihtin the limits of the network timing error specification.	LUM-TCFaultStatus Type Values: 1 ok 2 alarm Description: A value indicating the current state of a potential fault condition leading to an alarm for an object. ok - indicates that no fault condition is present and no alarm is active or the alarm has been cleared. …	.1.3.6.1.4.1.8708.2.83.2.2.1.1.15
lumPtpClockHoldoverOutOfSpec The clock has lost its tracability to a master and gone onto holdover. The time error introduced due to the holdover operation is deemed to be outside the limits of the network timing error specification.	LUM-TCFaultStatus Type Values: 1 ok 2 alarm Description: A value indicating the current state of a potential fault condition leading to an alarm for an object. ok - indicates that no fault condition is present and no alarm is active or the alarm has been cleared. …	.1.3.6.1.4.1.8708.2.83.2.2.1.1.16

Table of default data sets for boundary clocks within the system.

lumPtpDefaultDSEntry row .1.3.6.1.4.1.8708.2.83.2.3.1.1

A table entry that contains default data set values describing the local clock
as defined in [IEEE-1588-2008].

Indexes

lumPtpDefaultDSIndex

Column	Syntax	OID
lumPtpDefaultDSName The management name of the clock, for example 'defaultDs:1:2', where the first number indicates subrack and the second slot number.	LUM-TCMgmtNameString Type Constraints: range: 0..255 Description: An octet string containing administrative information, in human-readable form. More or less the same as SnmpAdminString defined in SNMP-FRAMEWORK-MIB.	.1.3.6.1.4.1.8708.2.83.2.3.1.1.1
lumPtpDefaultDSIndex An arbitrary index assigned to each clock entry. For each clock instnace the same index is used for all clock level standard datasets, such as DefaultDS, CurrentDS, ParentDS and TimepropertiesDS.	Unsigned32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.8708.2.83.2.3.1.1.2
lumPtpDefaultDSLocalId Internal Id used for index calculation.	Integer32 Constraints: range: -1-2147483647	.1.3.6.1.4.1.8708.2.83.2.3.1.1.3
lumPtpDefaultDSClockId ClockIdentity for this clock instance, as defined in [IEEE-1588-2008] The value of the PtpClockIdentity should be taken from the IEEE EUI-64 individual assigned numbers as indicated in Section 7.5.2.2.2 o…	PtpClockIdentity Type Constraints: range: 23 Description: The clock identity is an 8-octet array and will be presented in the form of a character array. Network byte order is assumed. The value of the PtpClockIdentity should be taken from the IEEE EUI-64 individual…	.1.3.6.1.4.1.8708.2.83.2.3.1.1.4
lumPtpDefaultDSClockDomain The Clock domain is identified by an integer, the domainNumber, in the range of 0 to 255. An integer value that is used to assign each PTP device to a particular domain. 8275.1 allowed range: 24-43 …	Unsigned32r/w Constraints: range: 24-43	.1.3.6.1.4.1.8708.2.83.2.3.1.1.5
lumPtpDefaultDSClockPriority1 A user configurable designation that a clock belongs to an ordered set of clocks from which a master is selected. The attribute is not used and therefore statically set to 128 and not writable for ITU-T profiles 8275.1 …	Unsigned32 Constraints: range: 128-128	.1.3.6.1.4.1.8708.2.83.2.3.1.1.6
lumPtpDefaultDSClockPriority2 A user configurable designation that provides finer grained ordering among otherwise equivalent clocks during master clock selection.	Unsigned32r/w Constraints: range: 0-255	.1.3.6.1.4.1.8708.2.83.2.3.1.1.7
lumPtpDefaultDSTwoStepMode This object specifies whether the two-step process is used. In two-step operation timing information is sent using the combination of a event message and a subsequent general message.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.8708.2.83.2.3.1.1.8
lumPtpDefaultDSClockClientOnly A clock that is set as client-only can only act as a consuming PTP network endpoint and can never act as a grand master.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.8708.2.83.2.3.1.1.9
lumPtpDefaultDSMaxStepsRemoved Upper limit for how many steps removed a grand master can be from the local clock while still being considered eligible for selection.	Unsigned32r/w Constraints: range: 1-255	.1.3.6.1.4.1.8708.2.83.2.3.1.1.10
lumPtpDefaultDSLocalPriority Internal priority of the local clock used in the clock master selection process.	Unsigned32r/w Constraints: range: 1-255	.1.3.6.1.4.1.8708.2.83.2.3.1.1.11
lumPtpDefaultDSClockClass Clock class for the local PTP clock instance. For ITU-T G.8275.1 and G.8275.2 a BC not locked to an external time source can assume the clock class values: 135 - T-BC in holdover, within holdover specif…	Unsigned32 Constraints: range: 0-255	.1.3.6.1.4.1.8708.2.83.2.3.1.1.12
lumPtpDefaultDSClockAccuracy The expected accuracy of the clock if acting as a grand master.	Unsigned32 Constraints: range: 254-254	.1.3.6.1.4.1.8708.2.83.2.3.1.1.13
lumPtpDefaultDSClockOffsetScaledLogVariance An estimate of the variations of the local clock from a linear timescale when it is not synchronized to another clock.	Unsigned32 Constraints: range: 65535-65535	.1.3.6.1.4.1.8708.2.83.2.3.1.1.14

Table of current data set objects within the system.
Current dataset describess the relation between the local clock
and the timing source it locked to.

lumPtpCurrentDSEntry row .1.3.6.1.4.1.8708.2.83.2.4.1.1

A table entry that contains current data set values.

Indexes

lumPtpCurrentDSIndex

Column	Syntax	OID
lumPtpCurrentDSName The management name of the clock current dataset, for example 'currentDs:1:2', where the first number indicates subrack and the second slot number.	LUM-TCMgmtNameString Type Constraints: range: 0..255 Description: An octet string containing administrative information, in human-readable form. More or less the same as SnmpAdminString defined in SNMP-FRAMEWORK-MIB.	.1.3.6.1.4.1.8708.2.83.2.4.1.1.1
lumPtpCurrentDSIndex An arbitrary index assigned to each clock entry. For each clock instnace the same index is used for all clock level standard datasets, such as DefaultDS, CurrentDS, ParentDS and TimepropertiesDS.	Unsigned32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.8708.2.83.2.4.1.1.2
lumPtpCurrentDSLocalId Internal Id used for index calculation.	Integer32 Constraints: range: -1-2147483647	.1.3.6.1.4.1.8708.2.83.2.4.1.1.3
lumPtpCurrentDSStepsRemoved The number of communication paths traversed between the local clock and the grandmaster clock.	Unsigned32 Constraints: range: 0-255	.1.3.6.1.4.1.8708.2.83.2.4.1.1.4
lumPtpCurrentDSOffsetFromMaster The observed time difference between the local clock and the grandmaster clock.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8708.2.83.2.4.1.1.5
lumPtpCurrentDSMeanPathDelay The observered mean propagation time between the local clock and the grandmaster clock.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.8708.2.83.2.4.1.1.6

Table of parent data sets for boundary clocks within the system

lumPtpParentDSEntry row .1.3.6.1.4.1.8708.2.83.2.5.1.1

A table entry that contains parent data set values describing the remote PTP master
as defined in [IEEE-1588-2008].

Indexes

lumPtpParentDSIndex

Column	Syntax	OID
lumPtpParentDSName The management name of the clock, for example 'parenttDs:1:2', where the first number indicates subrack and the second slot number.	LUM-TCMgmtNameString Type Constraints: range: 0..255 Description: An octet string containing administrative information, in human-readable form. More or less the same as SnmpAdminString defined in SNMP-FRAMEWORK-MIB.	.1.3.6.1.4.1.8708.2.83.2.5.1.1.1
lumPtpParentDSIndex An arbitrary index assigned to each clock entry. For each clock instnace the same index is used for all clock level standard datasets, such as DefaultDS, CurrentDS, ParentDS and TimepropertiesDS.	Unsigned32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.8708.2.83.2.5.1.1.2
lumPtpParentDSLocalId Interal id used for index calculation.	Integer32 Constraints: range: -1-2147483647	.1.3.6.1.4.1.8708.2.83.2.5.1.1.3
lumPtpParentDSClockPortIdentity Port identity of the port on the master that issues the Sync messages used in synchronizing this clock.	PtpParentPortIdentity Type Constraints: range: 28 Description: The clock identity is an 8-octet array followed by a port number and will be presented in the form of a character array.	.1.3.6.1.4.1.8708.2.83.2.5.1.1.4
lumPtpParentDSStats Indicates whether the values of ParentDSOffset and ParentDSClockPhChRate have been measured and are valid. A TRUE value shall indicate valid data.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.8708.2.83.2.5.1.1.5
lumPtpParentDSOffset This value is the variance of the parent clocks phase as measured by the local clock.	LUM-TCUnsigned32WithNA Type Constraints: range: 0..4294967294 Description: An unsigned32 integer of an object. 4294967293 used to tell that it is not possible to read attribute at the moment. 4294967294 is used to indicate that the attribute is not used on the object	.1.3.6.1.4.1.8708.2.83.2.5.1.1.6
lumPtpParentDSClockPhaseChangeRate Estimate of the parent clocks phase change rate as measured by the local clock client.	LUM-TCUnsigned32WithNA Type Constraints: range: 0..4294967294 Description: An unsigned32 integer of an object. 4294967293 used to tell that it is not possible to read attribute at the moment. 4294967294 is used to indicate that the attribute is not used on the object	.1.3.6.1.4.1.8708.2.83.2.5.1.1.7
lumPtpParentDSGrandmasterClockIdentity Clock identity of the grand master used to synchronize the local clock.	PtpClockIdentity Type Constraints: range: 23 Description: The clock identity is an 8-octet array and will be presented in the form of a character array. Network byte order is assumed. The value of the PtpClockIdentity should be taken from the IEEE EUI-64 individual…	.1.3.6.1.4.1.8708.2.83.2.5.1.1.8
lumPtpParentDSGrandmasterClockPriority1 Priority 1 value as announced by the grand master clock.	Unsigned32 Constraints: range: 0-255	.1.3.6.1.4.1.8708.2.83.2.5.1.1.9
lumPtpParentDSGrandmasterClockPriority2 Priority 2 value as announced by the grand master clock.	Unsigned32 Constraints: range: 0-255	.1.3.6.1.4.1.8708.2.83.2.5.1.1.10
lumPtpParentDSGMClockQualityClass Clock class value as reported by the grand master clock.	Unsigned32 Constraints: range: 0-255	.1.3.6.1.4.1.8708.2.83.2.5.1.1.11
lumPtpParentDSGMClockQualityAccuracy Clock quality accuracy as announced by the grand master clock.	PtpClockQualityAccuracyType Type Values: 0 accuracy25ns 1 accuracy100ns 2 accuracy250ns 3 accuracy1us 4 accuracy2500ns 5 accuracy10us 6 accuracy25us 7 accuracy100us 8 accuracy250us 9 accuracy1ms 10 accuracy2500us 11 accuracy10ms 12 accuracy25ms 13 accuracy100ms 14 accuracy250ms 15 accuracy1s 16 accuracy10s 17 accuracyL10s 18 accuracyUnknown 19 accuracyLast Description: The ClockQuality.	.1.3.6.1.4.1.8708.2.83.2.5.1.1.12
lumPtpParentDSGMClockQualityOffset Clock quality offset as announced by the grand master clock.	Unsigned32 Constraints: range: 0-65535	.1.3.6.1.4.1.8708.2.83.2.5.1.1.13

Table of time properties data sets for all boundary clocks within the system.

lumPtpTimePropertiesDSEntry row .1.3.6.1.4.1.8708.2.83.2.6.1.1

A table entry that contains time properties data set values, describing the
remote grand master and thus the PTP domain time properties in more detail.

Indexes

lumPtpTimePropertiesDSIndex

Column	Syntax	OID
lumPtpTimePropertiesDSName The management name of the clock, for example 'timePropertiesDs:1:2', where the first number indicates subrack and the second slot number.	LUM-TCMgmtNameString Type Constraints: range: 0..255 Description: An octet string containing administrative information, in human-readable form. More or less the same as SnmpAdminString defined in SNMP-FRAMEWORK-MIB.	.1.3.6.1.4.1.8708.2.83.2.6.1.1.1
lumPtpTimePropertiesDSIndex An arbitrary index assigned to each clock entry. For each clock instnace the same index is used for all clock level standard datasets, such as DefaultDS, CurrentDS, ParentDS and TimepropertiesDS.	Unsigned32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.8708.2.83.2.6.1.1.2
lumPtpTimePropertiesDSLocalId Internal Id used for index calculation.	Integer32 Constraints: range: -1-2147483647	.1.3.6.1.4.1.8708.2.83.2.6.1.1.3
lumPtpTimePropertiesDSUtcOffsetValid Indication on wether the UTC offset value is known to be correct. timePropertiesDS.currentUtcOffsetValid	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.8708.2.83.2.6.1.1.4
lumPtpTimePropertiesDSUtcOffset In PTP systems whose epoch is the PTP epoch, the value of Current Utc Offset is the offset between TAI and UTC; otherwise, the value has no meaning. The value shall be in units of seconds. timeProperties…	Unsigned32 Constraints: range: 0-65535	.1.3.6.1.4.1.8708.2.83.2.6.1.1.5
lumPtpTimePropertiesDSLeap59 In PTP systems whose epoch is the PTP epoch, a TRUE value for timePropertiesDS.leap59 indicates that the last minute of the current UTC day contains 59 seconds	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.8708.2.83.2.6.1.1.6
lumPtpTimePropertiesDSLeap61 In PTP systems whose epoch is the PTP epoch, a TRUE value for timePropertiesDS.leap61 indicates that the last minute of the current UTC day contains 61 seconds.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.8708.2.83.2.6.1.1.7
lumPtpTimePropertiesDSTimeTraceable The value of timePropertiesDS.timeTraceable is TRUE if the timescale and the value of timePropertiesDS.currentUtcOffset are traceable to a primary reference; otherwise, the value shall be FALSE	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.8708.2.83.2.6.1.1.8
lumPtpTimePropertiesDSFrequencyTraceable The value of timePropertiesDS.frequencyTraceable is TRUE if the frequency determining the timescale is traceable to a primary reference; otherwise, the value shall be FALSE.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.8708.2.83.2.6.1.1.9
lumPtpTimePropertiesDSTimeScale Object describing if the clock timescale of the grandmaster clock is PTP. timePropertiesDS.ptpTimescale	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.8708.2.83.2.6.1.1.10
lumPtpTimePropertiesDSTimeSource Source of time used by the grand master clock. timePropertiesDS.timeSource	Unsigned32 Constraints: range: 0-255	.1.3.6.1.4.1.8708.2.83.2.6.1.1.11

Table of information about standard port datasets and other generic clock port
attibutes for clock ports within the system

lumPtpClockPortDSEntry row .1.3.6.1.4.1.8708.2.83.2.7.1.1

A table entry that contains port dataset values and generic clock port attributes
for a single clock port.

Indexes

lumPtpClockPortDSIndex

Column	Syntax	OID
lumPtpClockPortDSName The management name of the clock, for example 'clockportds:1:2', where the first number indicates subrack and the second slot number.	LUM-TCMgmtNameString Type Constraints: range: 0..255 Description: An octet string containing administrative information, in human-readable form. More or less the same as SnmpAdminString defined in SNMP-FRAMEWORK-MIB.	.1.3.6.1.4.1.8708.2.83.2.7.1.1.1
lumPtpClockPortDSIndex An arbitrary index assigned to each clockport entry. For each clock the same index is used for all clock port level configuration and state entries, such as ClockPortDs and ClockEthinterface.	Unsigned32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.8708.2.83.2.7.1.1.2
lumPtpClockPortDSLocalId Internal Id used for index calculation.	Integer32 Constraints: range: -1-2147483647	.1.3.6.1.4.1.8708.2.83.2.7.1.1.3
lumPtpClockPortDSIfNo The interface number of the physical port associated with the clock port.	LUM-TCPortNumberr/w Type Constraints: range: 0..116 Description: The number of a port on a board. If an interface has two numbers, the lowest number is used. 0 signifies an undefined port number.	.1.3.6.1.4.1.8708.2.83.2.7.1.1.4
lumPtpClockPortDSTxPort The tx number of the port physical port associated with the clock port.	LUM-TCPortNumberr/w Type Constraints: range: 0..116 Description: The number of a port on a board. If an interface has two numbers, the lowest number is used. 0 signifies an undefined port number.	.1.3.6.1.4.1.8708.2.83.2.7.1.1.5
lumPtpClockPortDSAdminStatus The administrative state for the clock port. down - The port is de-activated. up - The port will be activated when available. Alarms are not suppressed.	LUM-TCBoardOrInterfaceAdminStatusr/w Type Values: 1 down 2 service 3 up Description: The administrative state for a board or interface. down - The board/interface should be inactive. service - The board/interface is activated but alarms are suppressed. Intended for use during servi…	.1.3.6.1.4.1.8708.2.83.2.7.1.1.6
lumPtpClockPortDSAddressType The adress mapping type used for transmission and reception of PTP messages on the port. addressTypeEth - Ethernet mulsicast mapping, used in ITU-T G.8275.1 addressTypeIPv4 - IPv4 mapping type used in ITU…	Enumeration Enumerated Values: 1 addressTypeEth 2 addressTypeIPv4 3 addressTypeIPv6	.1.3.6.1.4.1.8708.2.83.2.7.1.1.7
lumPtpClockPortDSClockId Clock identity part of the clock port identity - Clock ID of the clock that this port belongs to. portDS.portIdentity.clockIdentity	PtpClockPortTransportTypeAddress Type Constraints: range: 1..255 Description: The clock port transport protocol address used for this communication between the clock nodes. This is a string corresponding to the address type as specified by the transport type used. The transport types can be def…	.1.3.6.1.4.1.8708.2.83.2.7.1.1.8
lumPtpClockPortDSPortNumber Port number part of the clock port identity - Port number unique within the context of the clock. portDS.portIdentity.portNumber	Unsigned32 Constraints: range: 0-65535	.1.3.6.1.4.1.8708.2.83.2.7.1.1.9
lumPtpClockPortDSPortMode Port mode used for restriction of the best clock master algorithm. A clock port in port mode masterOnly can never assume the role of clock client. portDs.masterOnly	Enumerationr/w Enumerated Values: 1 auto 2 masterOnly	.1.3.6.1.4.1.8708.2.83.2.7.1.1.10
lumPtpClockPortDSPortState The current state of the protocol engine associated with this clock port. init - Port is inititalizing not ready to partcipate in PTP faulty - Port is in a fault state disabled -…	Enumeration Enumerated Values: 1 init 2 faulty 3 disabled 4 listening 5 preMaster 6 master 7 passive 8 uncalibrated 9 clockClient	.1.3.6.1.4.1.8708.2.83.2.7.1.1.11
lumPtpClockPortDSLocalPriority Local priority value of the port: used as a tie breaker in the master selection algorithm, when all other previous compared attributes of the data sets are equal. portDS.localPriority	Unsigned32r/w Constraints: range: 1-255	.1.3.6.1.4.1.8708.2.83.2.7.1.1.12
lumPtpClockPortDSDelayAssymetry Value used to compensate for a known persistent difference in propagation times between master -> clock client and clock client -> master. A positive value indicasted that master -> clock client propagati…	nanosecondsInteger32r/w Constraints: range: -100000-100000	.1.3.6.1.4.1.8708.2.83.2.7.1.1.13
lumPtpClockPortDSAnnounceInterval The amount of time between Announce messages sent from the port. Textual interpretation of portDS.logAnnounceInterval	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.8708.2.83.2.7.1.1.14
lumPtpClockPortDSSyncInterval The amount of time between Sync messages sent from the port. Textual interpretation of portDS.logSyncInterval	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.8708.2.83.2.7.1.1.15
lumPtpClockPortDSDelayReqInterval The amount of time between Delay Request messages sent from the port. Textual interpretation of portDS.logMinDelayReqInterval	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.8708.2.83.2.7.1.1.16
lumPtpClockPortDSAnnounceReceiptTimeout The number of Announce intervals that has to pass without reception of an Announce message before the port is declared timed out.	Unsigned32r/w Constraints: range: 3-255	.1.3.6.1.4.1.8708.2.83.2.7.1.1.17
lumPtpClockPortDSDelayMechanism The delay mechanism configured on the clock port. For ITU-T G.8275.1 and G.8275.2 delay mechanism is always e2e.	PtpClockMechanismType Type Values: 1 e2e 2 p2p 254 disabled Description: The clock type based on whether end-to-end or peer-to-peer mechanisms are used. The mechanism used to calculate the Mean Path Delay as indicated in Table 9 of [IEEE-1588-2008].	.1.3.6.1.4.1.8708.2.83.2.7.1.1.18
lumPtpClockPortDSVersionNumber This object specifies the PTP version being used.	Unsigned32 Constraints: range: 0-2	.1.3.6.1.4.1.8708.2.83.2.7.1.1.19

Table of information about the ethernet interface level configuration
related to a clock port using ethernet transport.

lumPtpClockEthInterfaceEntry row .1.3.6.1.4.1.8708.2.83.2.8.1.1

A table entry that contains ethernet level configuration related to
clock port that is using ethernet transport.

Indexes

lumPtpClockEthInterfaceIndex

Column	Syntax	OID
lumPtpClockEthInterfaceName The management name of the clock, for example 'clockEthInterface:1:2:1:1-2', where the first number indicates subrack and the second slot number, third interface number and fourth-fifth physical port numbers.	LUM-TCMgmtNameString Type Constraints: range: 0..255 Description: An octet string containing administrative information, in human-readable form. More or less the same as SnmpAdminString defined in SNMP-FRAMEWORK-MIB.	.1.3.6.1.4.1.8708.2.83.2.8.1.1.1
lumPtpClockEthInterfaceIndex An arbitrary index assigned to each clockport entry. For each clock the same index is used for all clock port level configuration and state entries, such as ClockPortDs and ClockEthinterface.	Unsigned32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.8708.2.83.2.8.1.1.2
lumPtpClockEthInterfaceLocalId Internal id used for index calculation.	Integer32 Constraints: range: -1-2147483647	.1.3.6.1.4.1.8708.2.83.2.8.1.1.3
lumPtpClockEthInterfaceIfNo The interface number of the ethernet interface associated with the clock port.	LUM-TCPortNumberr/w Type Constraints: range: 0..116 Description: The number of a port on a board. If an interface has two numbers, the lowest number is used. 0 signifies an undefined port number.	.1.3.6.1.4.1.8708.2.83.2.8.1.1.4
lumPtpClockEthInterfaceTxPort The tx number of the physical port associated with the clock port.	LUM-TCPortNumberr/w Type Constraints: range: 0..116 Description: The number of a port on a board. If an interface has two numbers, the lowest number is used. 0 signifies an undefined port number.	.1.3.6.1.4.1.8708.2.83.2.8.1.1.5
lumPtpClockEthInterfaceL2Port L2 Port.	LUM-TCPortNumber Type Constraints: range: 0..116 Description: The number of a port on a board. If an interface has two numbers, the lowest number is used. 0 signifies an undefined port number.	.1.3.6.1.4.1.8708.2.83.2.8.1.1.6
lumPtpClockEthInterfacePortMacAddress MAC address of the ethernet interface associated with the clock port.	PtpMacAddress Type Constraints: range: 17 Description: The MAC address is an 6-octet array and will be presented in the form of a character array. Network byte order is assumed.	.1.3.6.1.4.1.8708.2.83.2.8.1.1.7
lumPtpClockEthInterfaceTxMacAddressFwd The multicast MAC address used when transmitting PTP messages. - non-forwardable MAC (01:80:C2:00:00:0E) - forwardable MAC (01:1B:19:00:00:00)	Enumerationr/w Enumerated Values: 1 forwardable 2 non-forwardable	.1.3.6.1.4.1.8708.2.83.2.8.1.1.8

Table of foreign master data sets for all boundary clock wihtin the system.

lumPtpForeignMasterDSEntry row .1.3.6.1.4.1.8708.2.83.2.9.1.1

A table entry that contains foreign master data set values, describing remote clocks
sending Announce messages to the local clock.

Indexes

lumPtpForeignMasterDSIndex

Column	Syntax	OID
lumPtpForeignMasterDSName The management name of the clock, for example 'foreignMasterDs:1:2', where the first number indicates subrack and the second slot number.	LUM-TCMgmtNameString Type Constraints: range: 0..255 Description: An octet string containing administrative information, in human-readable form. More or less the same as SnmpAdminString defined in SNMP-FRAMEWORK-MIB.	.1.3.6.1.4.1.8708.2.83.2.9.1.1.1
lumPtpForeignMasterDSIndex An arbitrary index assigned to each foreign master entry.	Unsigned32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.8708.2.83.2.9.1.1.2
lumPtpForeignMasterDSLocalId Internal id used for index calculation.	Integer32 Constraints: range: -1-2147483647	.1.3.6.1.4.1.8708.2.83.2.9.1.1.3
lumPtpForeignMasterDSLocalPortNumber Port number of the local clock port where the master was found.	Unsigned32 Constraints: range: 0-65535	.1.3.6.1.4.1.8708.2.83.2.9.1.1.4
lumPtpForeignMasterDSLocalPortId Index attribute of the clock port where the master was found.	Unsigned32 Constraints: range: 0-65535	.1.3.6.1.4.1.8708.2.83.2.9.1.1.5
lumPtpForeignMasterDSClockPortIndex Index of the clock port object this foreign master belongs to.	Unsigned32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.8708.2.83.2.9.1.1.6
lumPtpForeignMasterDSPeerClockId Clock identity of peer clock sending the Announce message associated with the foreign master.	PtpClockIdentity Type Constraints: range: 23 Description: The clock identity is an 8-octet array and will be presented in the form of a character array. Network byte order is assumed. The value of the PtpClockIdentity should be taken from the IEEE EUI-64 individual…	.1.3.6.1.4.1.8708.2.83.2.9.1.1.7
lumPtpForeignMasterDSPeerPortNumber Port number of the peer clock port seding the Announce message associated with the foreign master.	Unsigned32 Constraints: range: 0-65535	.1.3.6.1.4.1.8708.2.83.2.9.1.1.8
lumPtpForeignMasterDSForeignClockId Clock identity of the foreign master.	PtpClockIdentity Type Constraints: range: 23 Description: The clock identity is an 8-octet array and will be presented in the form of a character array. Network byte order is assumed. The value of the PtpClockIdentity should be taken from the IEEE EUI-64 individual…	.1.3.6.1.4.1.8708.2.83.2.9.1.1.9
lumPtpForeignMasterDSStepsRemoved The number of communication paths traversed between the local clock and the foreign master clock.	Unsigned32 Constraints: range: 0-65535	.1.3.6.1.4.1.8708.2.83.2.9.1.1.10
lumPtpForeignMasterDSClockPriority1 Priority 1 value as announced by the foreign master clock.	Unsigned32 Constraints: range: 0-65535	.1.3.6.1.4.1.8708.2.83.2.9.1.1.11
lumPtpForeignMasterDSClockPriority2 Priority 2 value announced by the foreign master clock.	Unsigned32 Constraints: range: 0-65535	.1.3.6.1.4.1.8708.2.83.2.9.1.1.12
lumPtpForeignMasterDSClockClass Clock class value announced by the foreign master clock.	Unsigned32 Constraints: range: 0-65535	.1.3.6.1.4.1.8708.2.83.2.9.1.1.13
lumPtpForeignMasterDSOffset Clock quality offset announced by the foreign master clock.	Unsigned32 Constraints: range: 0-65535	.1.3.6.1.4.1.8708.2.83.2.9.1.1.14
lumPtpForeignMasterDSAccuracy Clock quality accuracy announced by the foreign master clock.	PtpClockQualityAccuracyType Type Values: 0 accuracy25ns 1 accuracy100ns 2 accuracy250ns 3 accuracy1us 4 accuracy2500ns 5 accuracy10us 6 accuracy25us 7 accuracy100us 8 accuracy250us 9 accuracy1ms 10 accuracy2500us 11 accuracy10ms 12 accuracy25ms 13 accuracy100ms 14 accuracy250ms 15 accuracy1s 16 accuracy10s 17 accuracyL10s 18 accuracyUnknown 19 accuracyLast Description: The ClockQuality.	.1.3.6.1.4.1.8708.2.83.2.9.1.1.15
lumPtpForeignMasterDSTimeSinceLastSync Time since last sync. Used together with number of Announce messages by local PTP implementation to qualify incoming Announce messages from a previously silent foreign master.	Unsigned32 Constraints: range: 0-65535	.1.3.6.1.4.1.8708.2.83.2.9.1.1.16
lumPtpForeignMasterDSNoOfAnnounceMessages Number of announce messages. Used together with Time since last Sync by local PTP implementation to qualify incoming Announce messages from a previously silent foreign master.	Unsigned32 Constraints: range: 0-65535	.1.3.6.1.4.1.8708.2.83.2.9.1.1.17

Table of peer data counters for discovered PTP peers within the system.

lumPtpPeerDSEntry row .1.3.6.1.4.1.8708.2.83.2.10.1.1

A table entry that contains peer data counters for a discovered PTP peer.
A peer can either be a master clock or a remote clock client.

Indexes

lumPtpPeerDSIndex

Column	Syntax	OID
lumPtpPeerDSName The management name of the clock, for example 'peerDs:1:2:1', where the first number indicates subrack and the second slot number.	LUM-TCMgmtNameString Type Constraints: range: 0..255 Description: An octet string containing administrative information, in human-readable form. More or less the same as SnmpAdminString defined in SNMP-FRAMEWORK-MIB.	.1.3.6.1.4.1.8708.2.83.2.10.1.1.1
lumPtpPeerDSIndex An arbitrary index assigned to each clock peer entry.	Unsigned32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.8708.2.83.2.10.1.1.2
lumPtpPeerDSLocalId Internal id used for index calculation.	Integer32 Constraints: range: -1-2147483647	.1.3.6.1.4.1.8708.2.83.2.10.1.1.3
lumPtpPeerDSLocalPortNumber Port number of the local clock port where the peer was found.	Unsigned32 Constraints: range: 0-65535	.1.3.6.1.4.1.8708.2.83.2.10.1.1.4
lumPtpPeerDSLocalPortId Index attribute of the local clock port where the peer was found.	Unsigned32 Constraints: range: 0-65535	.1.3.6.1.4.1.8708.2.83.2.10.1.1.5
lumPtpPeerDSPeerClockId Clock identity of the peer clock.	PtpClockIdentity Type Constraints: range: 23 Description: The clock identity is an 8-octet array and will be presented in the form of a character array. Network byte order is assumed. The value of the PtpClockIdentity should be taken from the IEEE EUI-64 individual…	.1.3.6.1.4.1.8708.2.83.2.10.1.1.6
lumPtpPeerDSClockPortIndex Index of the clock port object this peer belongs to.	Unsigned32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.8708.2.83.2.10.1.1.7
lumPtpPeerDSTxAnnounces Number of transmitted Announce messages to peer. Free-running counter.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.8708.2.83.2.10.1.1.8
lumPtpPeerDSRxAnnounces Number of received Announce messages from the peer. Free-running counter.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.8708.2.83.2.10.1.1.9
lumPtpPeerDSTxSyncs No of transmitted Sync messages to peer. Free-running counter.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.8708.2.83.2.10.1.1.10
lumPtpPeerDSRxSyncs No of received Sync messages from peer. Free-running counter.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.8708.2.83.2.10.1.1.11
lumPtpPeerDSRxFollowUps No of received Follow up messages from peer. Free-running counter.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.8708.2.83.2.10.1.1.12
lumPtpPeerDSTxDelayReqs No of transmitted Delay Request messages to peer. Free-running counter.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.8708.2.83.2.10.1.1.13
lumPtpPeerDSRxDelayReqs No of received Delay Request messages from peer. Free-running counter.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.8708.2.83.2.10.1.1.14
lumPtpPeerDSTxDelayRsps No of transmitted Delay Response messages to peer. Free-running counter.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.8708.2.83.2.10.1.1.15
lumPtpPeerDSRxDelayRsps No of received Delay Response messages from peer. Free-running counter.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.8708.2.83.2.10.1.1.16
lumPtpPeerDSTxSignaling No of transmitted Signaling messages to peer. Free-running counter.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.8708.2.83.2.10.1.1.17
lumPtpPeerDSRxSignaling No of received Signaling messages from peer. Free-running counter.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.8708.2.83.2.10.1.1.18
lumPtpPeerDSReset Reset counter trigger, fall back to normal state after set to true.	Enumerationr/w Enumerated Values: 1 normal 2 reset	.1.3.6.1.4.1.8708.2.83.2.10.1.1.19
lumPtpPeerDSPortAddress Peer port address.	PtpPeerAddress Type Constraints: range: 0..40 Description: The peer address is an octet array and will be presented in the form of a character array. The content can be either an Ethernet, IPv4 or IPv6 address.	.1.3.6.1.4.1.8708.2.83.2.10.1.1.20
lumPtpPeerDSAddressType The adress mapping type used for transmission and reception of PTP messages on the peer. addressTypeEth - Ethernet mulsicast mapping, used in ITU-T G.8275.1 addressTypeIPv4 - IPv4 mapping type used in ITU…	Enumeration Enumerated Values: 1 addressTypeEth 2 addressTypeIPv4 3 addressTypeIPv6	.1.3.6.1.4.1.8708.2.83.2.10.1.1.21
lumPtpPeerDSRejected No of rejected messages by a peer. Free-running counter.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.8708.2.83.2.10.1.1.22